Querying For Commit File and Package Metadata
There are several ostree and rpm-ostree commands that list file or package data based on either the Commit ID, or Refspec. If Refspec is passed as a parameter, it's the same as passing the most recent commit ID (head) for that branch.
Commit history
For a host that is freshly installed, there is only one commit in the history for the only branch.
root@photon-host [ ~ ]# ostree log photon/3.0/x86_64/minimal
commit a31a843985e314a9e70bcf09afe8d59f7351817d9fb743c2b6dab84f20833650
ContentChecksum: e91261daf8d60074f334a7ebf81d3b930c3fc88c765f994f79ab2445296f03c5
Date: 2019-08-29 11:20:19 +0000
Version: 3.0_minimal
This commit has no parent; if there was an older commit, it would have been listed too. We can get the same listing (either nicely formatted or raw variant data) by passing the Commit ID. Just the first several hex digits will suffice to identify the commit ID. We can either request to be displayed in a pretty format, or raw - the actual C struct.
root@photon-host [ ~ ]# ostree log a31a
commit a31a843985e314a9e70bcf09afe8d59f7351817d9fb743c2b6dab84f20833650
ContentChecksum: e91261daf8d60074f334a7ebf81d3b930c3fc88c765f994f79ab2445296f03c5
Date: 2019-08-29 11:20:19 +0000
Version: 3.0_minimal
root@photon-host [ ~ ]# ostree log a31a --raw
commit a31a843985e314a9e70bcf09afe8d59f7351817d9fb743c2b6dab84f20833650
({'rpmostree.inputhash': <'a3e8f3f6ef6e93c2ed6ce9edd1e9e80c93a36ecda0fed0d78f607e6ec3179d04'>, 'rpmostree.rpmmd-repos': <[{'id': <'photon'>, 'timestamp': <uint64 1567077533>}]>, 'version': <'3.0_minimal'>, 'rpmostree.rpmdb.pkglist': <[('Linux-PAM', '0', '1.3.0', '1.ph3', 'x86_64'), ('attr', '0', '2.4.48', '1.ph3', 'x86_64'), ('autogen-libopts', '0', '5.18.16', '1.ph3', 'x86_64'), ('bash', '0', '4.4.18', '1.ph3', 'x86_64'), ('bc', '0', '1.07.1', '1.ph3', 'x86_64'), ('binutils', '0', '2.31.1', '6.ph3', 'x86_64'), ('bridge-utils', '0', '1.6', '1.ph3', 'x86_64'), ('bubblewrap', '0', '0.3.0', '2.ph3', 'x86_64'), ('bzip2', '0', '1.0.6', '10.ph3', 'x86_64'), ('bzip2-libs', '0', '1.0.6', '10.ph3', 'x86_64'), ('ca-certificates', '0', '20190521', '1.ph3', 'x86_64'), ('ca-certificates-pki', '0', '20190521', '1.ph3', 'x86_64'), ('coreutils', '0', '8.30', '1.ph3', 'x86_64'), ('cpio', '0', '2.12', '4.ph3', 'x86_64'), ('cracklib', '0', '2.9.6', '8.ph3', 'x86_64'), ('cracklib-dicts', '0', '2.9.6', '8.ph3', 'x86_64'), ('curl', '0', '7.61.1', '4.ph3', 'x86_64'), ('curl-libs', '0', '7.61.1', '4.ph3', 'x86_64'), ('dbus', '0', '1.13.6', '1.ph3', 'x86_64'), ('device-mapper', '0', '2.02.181', '1.ph3', 'x86_64'), ('device-mapper-libs', '0', '2.02.181', '1.ph3', 'x86_64'), ('docker', '0', '18.06.2', '3.ph3', 'x86_64'), ('dracut', '0', '048', '1.ph3', 'x86_64'), ('dracut-tools', '0', '048', '1.ph3', 'x86_64'), ('e2fsprogs-libs', '0', '1.44.3', '2.ph3', 'x86_64'), ('elfutils', '0', '0.176', '1.ph3', 'x86_64'), ('elfutils-libelf', '0', '0.176', '1.ph3', 'x86_64'), ('expat', '0', '2.2.6', '2.ph3', 'x86_64'), ('expat-libs', '0', '2.2.6', '2.ph3', 'x86_64'), ('file', '0', '5.34', '1.ph3', 'x86_64'), ('file-libs', '0', '5.34', '1.ph3', 'x86_64'), ('filesystem', '0', '1.1', '4.ph3', 'x86_64'), ('findutils', '0', '4.6.0', '5.ph3', 'x86_64'), ('flex', '0', '2.6.4', '2.ph3', 'x86_64'), ('fuse', '0', '2.9.7', '5.ph3', 'x86_64'), ('gc', '0', '8.0.0', '1.ph3', 'x86_64'), ('glib', '0', '2.58.0', '4.ph3', 'x86_64'), ('glib-networking', '0', '2.59.1', '2.ph3', 'x86_64'), ('glibc', '0', '2.28', '4.ph3', 'x86_64'), ('glibc-iconv', '0', '2.28', '4.ph3', 'x86_64'), ('gmp', '0', '6.1.2', '2.ph3', 'x86_64'), ('gnupg', '0', '2.2.17', '1.ph3', 'x86_64'), ('gnutls', '0', '3.6.3', '3.ph3', 'x86_64'), ('gobject-introspection', '0', '1.58.0', '2.ph3', 'x86_64'), ('gpgme', '0', '1.11.1', '2.ph3', 'x86_64'), ('grep', '0', '3.1', '1.ph3', 'x86_64'), ('grub2', '0', '2.02', '13.ph3', 'x86_64'), ('grub2-efi', '0', '2.02', '13.ph3', 'x86_64'), ('grub2-pc', '0', '2.02', '13.ph3', 'x86_64'), ('guile', '0', '2.0.13', '2.ph3', 'x86_64'), ('gzip', '0', '1.9', '1.ph3', 'x86_64'), ('iana-etc', '0', '2.30', '2.ph3', 'noarch'), ('icu', '0', '61.1', '1.ph3', 'x86_64'), ('iproute2', '0', '4.18.0', '2.ph3', 'x86_64'), ('iptables', '0', '1.8.3', '1.ph3', 'x86_64'), ('js', '0', '1.8.5', '2.ph3', 'x86_64'), ('json-c', '0', '0.13.1', '1.ph3', 'x86_64'), ('json-glib', '0', '1.4.4', '1.ph3', 'x86_64'), ('kmod', '0', '25', '1.ph3', 'x86_64'), ('krb5', '0', '1.17', '1.ph3', 'x86_64'), ('libapparmor', '0', '2.13', '7.ph3', 'x86_64'), ('libarchive', '0', '3.3.3', '3.ph3', 'x86_64'), ('libassuan', '0', '2.5.1', '1.ph3', 'x86_64'), ('libcap', '0', '2.25', '8.ph3', 'x86_64'), ('libdb', '0', '5.3.28', '2.ph3', 'x86_64'), ('libffi', '0', '3.2.1', '6.ph3', 'x86_64'), ('libgcc', '0', '7.3.0', '4.ph3', 'x86_64'), ('libgcrypt', '0', '1.8.3', '2.ph3', 'x86_64'), ('libgomp', '0', '7.3.0', '4.ph3', 'x86_64'), ('libgpg-error', '0', '1.32', '1.ph3', 'x86_64'), ('libgsystem', '0', '2015.2', '2.ph3', 'x86_64'), ('libksba', '0', '1.3.5', '1.ph3', 'x86_64'), ('libltdl', '0', '2.4.6', '3.ph3', 'x86_64'), ('libmodulemd', '0', '2.4.0', '1.ph3', 'x86_64'), ('libpsl', '0', '0.20.2', '1.ph3', 'x86_64'), ('librepo', '0', '1.10.2', '1.ph3', 'x86_64'), ('libseccomp', '0', '2.4.0', '1.ph3', 'x86_64'), ('libselinux', '0', '2.8', '1.ph3', 'x86_64'), ('libsepol', '0', '2.8', '1.ph3', 'x86_64'), ('libsolv', '0', '0.6.35', '1.ph3', 'x86_64'), ('libsoup', '0', '2.64.0', '2.ph3', 'x86_64'), ('libssh2', '0', '1.9.0', '1.ph3', 'x86_64'), ('libstdc++', '0', '7.3.0', '4.ph3', 'x86_64'), ('libtasn1', '0', '4.13', '1.ph3', 'x86_64'), ('libtool', '0', '2.4.6', '3.ph3', 'x86_64'), ('libunistring', '0', '0.9.10', '1.ph3', 'x86_64'), ('libxml2', '0', '2.9.9', '1.ph3', 'x86_64'), ('libyaml', '0', '0.2.1', '2.ph3', 'x86_64'), ('linux', '0', '4.19.65', '3.ph3', 'x86_64'), ('m4', '0', '1.4.18', '2.ph3', 'x86_64'), ('mpfr', '0', '4.0.1', '1.ph3', 'x86_64'), ('ncurses', '0', '6.1', '1.ph3', 'x86_64'), ('ncurses-libs', '0', '6.1', '1.ph3', 'x86_64'), ('ncurses-terminfo', '0', '6.1', '1.ph3', 'x86_64'), ('net-tools', '0', '1.60', '11.ph3', 'x86_64'), ('nettle', '0', '3.4', '1.ph3', 'x86_64'), ('npth', '0', '1.6', '1.ph3', 'x86_64'), ('nspr', '0', '4.21', '1.ph3', 'x86_64'), ('nss-altfiles', '0', '2.23.0', '1.ph3', 'x86_64'), ('nss-libs', '0', '3.44', '2.ph3', 'x86_64'), ('openssh', '0', '7.8p1', '5.ph3', 'x86_64'), ('openssh-clients', '0', '7.8p1', '5.ph3', 'x86_64'), ('openssh-server', '0', '7.8p1', '5.ph3', 'x86_64'), ('openssl', '0', '1.0.2s', '1.ph3', 'x86_64'), ('ostree', '0', '2019.2', '1.ph3', 'x86_64'), ('ostree-grub2', '0', '2019.2', '1.ph3', 'x86_64'), ('ostree-libs', '0', '2019.2', '1.ph3', 'x86_64'), ('pcre', '0', '8.42', '1.ph3', 'x86_64'), ('pcre-libs', '0', '8.42', '1.ph3', 'x86_64'), ('photon-release', '0', '3.0', '3.ph3', 'noarch'), ('photon-repos', '0', '3.0', '3.ph3', 'noarch'), ('pinentry', '0', '1.1.0', '1.ph3', 'x86_64'), ('pkg-config', '0', '0.29.2', '2.ph3', 'x86_64'), ('polkit', '0', '0.113', '5.ph3', 'x86_64'), ('popt', '0', '1.16', '5.ph3', 'x86_64'), ('procps-ng', '0', '3.3.15', '1.ph3', 'x86_64'), ('python3', '0', '3.7.3', '2.ph3', 'x86_64'), ('python3-libs', '0', '3.7.3', '2.ph3', 'x86_64'), ('readline', '0', '7.0', '2.ph3', 'x86_64'), ('rpm-libs', '0', '4.14.2', '4.ph3', 'x86_64'), ('rpm-ostree', '0', '2019.3', '1.ph3', 'x86_64'), ('sed', '0', '4.5', '1.ph3', 'x86_64'), ('shadow', '0', '4.6', '3.ph3', 'x86_64'), ('shadow-tools', '0', '4.6', '3.ph3', 'x86_64'), ('sqlite-libs', '0', '3.27.2', '3.ph3', 'x86_64'), ('systemd', '0', '239', '13.ph3', 'x86_64'), ('util-linux', '0', '2.32', '1.ph3', 'x86_64'), ('util-linux-libs', '0', '2.32', '1.ph3', 'x86_64'), ('vim', '0', '8.1.0388', '4.ph3', 'x86_64'), ('which', '0', '2.21', '5.ph3', 'x86_64'), ('xz', '0', '5.2.4', '1.ph3', 'x86_64'), ('xz-libs', '0', '5.2.4', '1.ph3', 'x86_64'), ('zchunk', '0', '1.1.1', '1.ph3', 'x86_64'), ('zchunk-libs', '0', '1.1.1', '1.ph3', 'x86_64'), ('zlib', '0', '1.2.11', '1.ph3', 'x86_64')]>}, @ay [], @a(say) [], '', '', uint64 1567077619, [byte 0x1e, 0x0a, 0x85, 0x20, 0xa8, 0xe0, 0x18, 0x6a, 0x88, 0x15, 0xc0, 0xd9, 0xb0, 0xab, 0xc9, 0x98, 0x94, 0xa1, 0xfb, 0x0a, 0x48, 0xdf, 0xa0, 0x73, 0x32, 0x02, 0x9a, 0xdf, 0x49, 0xed, 0x13, 0x8d], [byte 0x44, 0x6a, 0x0e, 0xf1, 0x1b, 0x7c, 0xc1, 0x67, 0xf3, 0xb6, 0x03, 0xe5, 0x85, 0xc7, 0xee, 0xee, 0xb6, 0x75, 0xfa, 0xa4, 0x12, 0xd5, 0xec, 0x73, 0xf6, 0x29, 0x88, 0xeb, 0x0b, 0x6c, 0x54, 0x88])
Listing file mappings
This command lists the file relations between the original source Linux Photon filetree and the deployed filetree. The normal columns include file type type (regular file, directory, link), permissions in chmod octal format, userID, groupID, file size, file name.
root@photon-host [ ~ ]# ostree ls photon/3.0/x86_64/minimal
d00755 0 0 0 /
l00777 0 0 0 /bin -> usr/bin
l00777 0 0 0 /home -> var/home
l00777 0 0 0 /lib -> usr/lib
l00777 0 0 0 /lib64 -> usr/lib
l00777 0 0 0 /media -> run/media
l00777 0 0 0 /mnt -> var/mnt
l00777 0 0 0 /opt -> var/opt
l00777 0 0 0 /ostree -> sysroot/ostree
l00777 0 0 0 /root -> var/roothome
l00777 0 0 0 /sbin -> usr/sbin
l00777 0 0 0 /srv -> var/srv
l00777 0 0 0 /tmp -> sysroot/tmp
d00755 0 0 0 /boot
d00755 0 0 0 /dev
d00755 0 0 0 /proc
d00755 0 0 0 /run
d00755 0 0 0 /sys
d00755 0 0 0 /sysroot
d00755 0 0 0 /usr
d00755 0 0 0 /var
Extra columns can be added like checksum (-C) and extended attributes (-X).
root@photon-host [ /usr/share/man/man1 ]# ostree ls photon/3.0/x86_64/minimal -C
d00755 0 0 0 1e0a8520a8e0186a8815c0d9b0abc99894a1fb0a48dfa07332029adf49ed138d 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /
l00777 0 0 0 389846c2702216e1367c8dfb68326a6b93ccf5703c89c93979052a9bf359608e /bin -> usr/bin
l00777 0 0 0 4344c10bf4931483f918496534f12ed9b50dc6a2cead35e3cd9dd898d6ac9414 /home -> var/home
l00777 0 0 0 f11902ca9d69a80df33918534a3e443251fd0aa7f94b76301e1f55e52aed29dd /lib -> usr/lib
l00777 0 0 0 f11902ca9d69a80df33918534a3e443251fd0aa7f94b76301e1f55e52aed29dd /lib64 -> usr/lib
l00777 0 0 0 75317a3df11447c470ffdd63dde045450ca97dfb2a97a0f3f6a21a5da66f737c /media -> run/media
l00777 0 0 0 97c55dbe24e8f3aecfd3f3e5b3f44646fccbb39799807d37a217e9c871da108b /mnt -> var/mnt
l00777 0 0 0 46b1abbd27a846a9257a8d8c9fc4b384ac0888bdb8ac0d6a2d5de72715bd5092 /opt -> var/opt
l00777 0 0 0 d37269e3f46023fd0275212473e07011894cdf4148cbf3fb5758a7e9471dad8e /ostree -> sysroot/ostree
l00777 0 0 0 6f800e74eed172661278d1e1f09e389a6504dcd3358618e1c1618f91f9d33601 /root -> var/roothome
l00777 0 0 0 e0bead7be9323b06bea05cb9b66eb151839989e3a4e5d1a93e09a36919e91818 /sbin -> usr/sbin
l00777 0 0 0 5d4250bba1ed300f793fa9769474351ee5cebd71e8339078af7ebfbe6256d9b5 /srv -> var/srv
l00777 0 0 0 364fbd62f91ca1e06eb7dbd50c93de8976f2cea633658e2dbe803ce6f7490c09 /tmp -> sysroot/tmp
d00755 0 0 0 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /boot
d00755 0 0 0 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /dev
d00755 0 0 0 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /proc
d00755 0 0 0 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /run
d00755 0 0 0 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /sys
d00755 0 0 0 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /sysroot
d00755 0 0 0 ef1c0980e0d77f64e7f250a3e48f0b24e9285fc0716b80520dac6f98c148324a 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /usr
d00755 0 0 0 a3a987e053ea5a116f1e75a31cd7557fc6e57a3ae09e64171d7fea17ef71ec3e 446a0ef11b7cc167f3b603e585c7eeeeb675faa412d5ec73f62988eb0b6c5488 /var
By default, only the top folders are listed, but -R will list recursively. Instead of listing over 10,000 files, let's filter to just all files that contain 'rpm-ostree', 'rpmostree' or 'RpmOstree', that must belong to rpm-ostree package itself.
root@photon-host [ /usr/share/rpm-ostree ]# ostree ls photon/3.0/x86_64/minimal -R | grep -e '[Rr]pm-\?[Oo]stree'
-00755 0 0 749000 /usr/bin/rpm-ostree
d00755 0 0 0 /usr/bin/rpm-ostree-host
-00644 0 0 1069 /usr/bin/rpm-ostree-host/function.inc
-00755 0 0 10507 /usr/bin/rpm-ostree-host/mk-ostree-host.sh
-00644 0 0 209 /usr/etc/rpm-ostreed.conf
-00644 0 0 1530 /usr/etc/dbus-1/system.d/org.projectatomic.rpmostree1.conf
l00777 0 0 0 /usr/lib/librpmostree-1.so.1 -> librpmostree-1.so.1.0.0
-00755 0 0 5278496 /usr/lib/librpmostree-1.so.1.0.0
-00644 0 0 2312 /usr/lib/girepository-1.0/RpmOstree-1.0.typelib
-00755 0 0 22 /usr/lib/kernel/install.d/00-rpmostree-skip.install
d00755 0 0 0 /usr/lib/rpm-ostree
-00755 0 0 1640704 /usr/lib/rpm-ostree/libdnf.so.2
-00644 0 0 622 /usr/lib/rpm-ostree/rpm-ostree-0-integration.conf
d00755 0 0 0 /usr/lib/sysimage/rpm-ostree-base-db
-00644 0 0 544768 /usr/lib/sysimage/rpm-ostree-base-db/Basenames
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Conflictname
-00644 0 0 110592 /usr/lib/sysimage/rpm-ostree-base-db/Dirnames
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Enhancename
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Filetriggername
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Group
-00644 0 0 12288 /usr/lib/sysimage/rpm-ostree-base-db/Installtid
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Name
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Obsoletename
-00644 0 0 2625536 /usr/lib/sysimage/rpm-ostree-base-db/Packages
-00644 0 0 86016 /usr/lib/sysimage/rpm-ostree-base-db/Providename
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Recommendname
-00644 0 0 69632 /usr/lib/sysimage/rpm-ostree-base-db/Requirename
-00644 0 0 20480 /usr/lib/sysimage/rpm-ostree-base-db/Sha1header
-00644 0 0 16384 /usr/lib/sysimage/rpm-ostree-base-db/Sigmd5
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Suggestname
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Supplementname
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Transfiletriggername
-00644 0 0 8192 /usr/lib/sysimage/rpm-ostree-base-db/Triggername
-00644 0 0 263 /usr/lib/systemd/system/rpm-ostree-bootstatus.service
-00644 0 0 257 /usr/lib/systemd/system/rpm-ostreed-automatic.service
-00644 0 0 227 /usr/lib/systemd/system/rpm-ostreed-automatic.timer
-00644 0 0 272 /usr/lib/systemd/system/rpm-ostreed.service
-00644 0 0 102 /usr/lib/systemd/system-preset/40-rpm-ostree-auto.preset
-00644 0 0 622 /usr/lib/tmpfiles.d/rpm-ostree-0-integration.conf
-00644 0 0 1082 /usr/lib/tmpfiles.d/rpm-ostree-1-autovar.conf
-00755 0 0 53 /usr/libexec/rpm-ostreed
-00644 0 0 3049 /usr/share/bash-completion/completions/rpm-ostree
-00644 0 0 15997 /usr/share/dbus-1/interfaces/org.projectatomic.rpmostree1.xml
-00644 0 0 133 /usr/share/dbus-1/system-services/org.projectatomic.rpmostree1.service
-00644 0 0 6160 /usr/share/polkit-1/actions/org.projectatomic.rpmostree1.policy
d00755 0 0 0 /usr/share/rpm-ostree
-00644 0 0 1169 /usr/share/rpm-ostree/treefile.json
atomic is really an alias for rpm-ostree command. The last file treefile.json is not installed by the rpm-ostree package, it is actually downloaded from the server, as we will see in the next chapter. For now, let us notice "osname" : "photon", "ref" : "photon/1.0/x86_64/minimal", "automatic_version_prefix" : "1.0_minimal", that matches what we have known so far, and also the "documentation" : false setting, that explains why there are no manual files installed for rpm-ostree, and in fact for any package.
root@photon-host [ /usr/share/rpm-ostree ]# ls -l /usr/share/man/man1
total 0
Listing configuration changes
To diff the current /etc configuration versus default /etc (from the base image), this command will show the Modified, Added and Deleted files:
root@photon-host [ ~ ]# ostree admin config-diff
M ssh/sshd_config
M machine-id
M fstab
M hosts
M mtab
M shadow
A ssh/ssh_host_rsa_key
A ssh/ssh_host_rsa_key.pub
A ssh/ssh_host_dsa_key
A ssh/ssh_host_dsa_key.pub
A ssh/ssh_host_ecdsa_key
A ssh/ssh_host_ecdsa_key.pub
A ssh/ssh_host_ed25519_key
A ssh/ssh_host_ed25519_key.pub
A udev/hwdb.bin
A resolv.conf
A hostname
A localtime
A .pwd.lock
A .updated
Listing packages
The following is the rpm-ostree command that lists all the packages for that branch, extracted from RPM database.
root@photon-host [ ~ ]# rpm-ostree db list photon/3.0/x86_64/minimal
ostree commit: photon/3.0/x86_64/minimal (a31a843985e314a9e70bcf09afe8d59f7351817d9fb743c2b6dab84f20833650)
Linux-PAM-1.3.0-1.ph3.x86_64
attr-2.4.48-1.ph3.x86_64
autogen-libopts-5.18.16-1.ph3.x86_64
bash-4.4.18-1.ph3.x86_64
bc-1.07.1-1.ph3.x86_64
binutils-2.31.1-6.ph3.x86_64
bridge-utils-1.6-1.ph3.x86_64
bubblewrap-0.3.0-2.ph3.x86_64
bzip2-1.0.6-10.ph3.x86_64
bzip2-libs-1.0.6-10.ph3.x86_64
ca-certificates-20190521-1.ph3.x86_64
ca-certificates-pki-20190521-1.ph3.x86_64
coreutils-8.30-1.ph3.x86_64
cpio-2.12-4.ph3.x86_64
cracklib-2.9.6-8.ph3.x86_64
cracklib-dicts-2.9.6-8.ph3.x86_64
curl-7.61.1-4.ph3.x86_64
curl-libs-7.61.1-4.ph3.x86_64
dbus-1.13.6-1.ph3.x86_64
device-mapper-2.02.181-1.ph3.x86_64
device-mapper-libs-2.02.181-1.ph3.x86_64
docker-18.06.2-3.ph3.x86_64
dracut-048-1.ph3.x86_64
dracut-tools-048-1.ph3.x86_64
e2fsprogs-libs-1.44.3-2.ph3.x86_64
elfutils-0.176-1.ph3.x86_64
elfutils-libelf-0.176-1.ph3.x86_64
expat-2.2.6-2.ph3.x86_64
expat-libs-2.2.6-2.ph3.x86_64
file-5.34-1.ph3.x86_64
file-libs-5.34-1.ph3.x86_64
filesystem-1.1-4.ph3.x86_64
findutils-4.6.0-5.ph3.x86_64
flex-2.6.4-2.ph3.x86_64
fuse-2.9.7-5.ph3.x86_64
gc-8.0.0-1.ph3.x86_64
glib-2.58.0-4.ph3.x86_64
glib-networking-2.59.1-2.ph3.x86_64
glibc-2.28-4.ph3.x86_64
glibc-iconv-2.28-4.ph3.x86_64
gmp-6.1.2-2.ph3.x86_64
gnupg-2.2.17-1.ph3.x86_64
gnutls-3.6.3-3.ph3.x86_64
gobject-introspection-1.58.0-2.ph3.x86_64
gpgme-1.11.1-2.ph3.x86_64
grep-3.1-1.ph3.x86_64
grub2-2.02-13.ph3.x86_64
grub2-efi-2.02-13.ph3.x86_64
grub2-pc-2.02-13.ph3.x86_64
guile-2.0.13-2.ph3.x86_64
gzip-1.9-1.ph3.x86_64
iana-etc-2.30-2.ph3.noarch
icu-61.1-1.ph3.x86_64
iproute2-4.18.0-2.ph3.x86_64
iptables-1.8.3-1.ph3.x86_64
js-1.8.5-2.ph3.x86_64
json-c-0.13.1-1.ph3.x86_64
json-glib-1.4.4-1.ph3.x86_64
kmod-25-1.ph3.x86_64
krb5-1.17-1.ph3.x86_64
libapparmor-2.13-7.ph3.x86_64
libarchive-3.3.3-3.ph3.x86_64
libassuan-2.5.1-1.ph3.x86_64
libcap-2.25-8.ph3.x86_64
libdb-5.3.28-2.ph3.x86_64
libffi-3.2.1-6.ph3.x86_64
libgcc-7.3.0-4.ph3.x86_64
libgcrypt-1.8.3-2.ph3.x86_64
libgomp-7.3.0-4.ph3.x86_64
libgpg-error-1.32-1.ph3.x86_64
libgsystem-2015.2-2.ph3.x86_64
libksba-1.3.5-1.ph3.x86_64
libltdl-2.4.6-3.ph3.x86_64
libmodulemd-2.4.0-1.ph3.x86_64
libpsl-0.20.2-1.ph3.x86_64
librepo-1.10.2-1.ph3.x86_64
libseccomp-2.4.0-1.ph3.x86_64
libselinux-2.8-1.ph3.x86_64
libsepol-2.8-1.ph3.x86_64
libsolv-0.6.35-1.ph3.x86_64
libsoup-2.64.0-2.ph3.x86_64
libssh2-1.9.0-1.ph3.x86_64
libstdc++-7.3.0-4.ph3.x86_64
libtasn1-4.13-1.ph3.x86_64
libtool-2.4.6-3.ph3.x86_64
libunistring-0.9.10-1.ph3.x86_64
libxml2-2.9.9-1.ph3.x86_64
libyaml-0.2.1-2.ph3.x86_64
linux-4.19.65-3.ph3.x86_64
m4-1.4.18-2.ph3.x86_64
mpfr-4.0.1-1.ph3.x86_64
ncurses-6.1-1.ph3.x86_64
ncurses-libs-6.1-1.ph3.x86_64
ncurses-terminfo-6.1-1.ph3.x86_64
net-tools-1.60-11.ph3.x86_64
nettle-3.4-1.ph3.x86_64
npth-1.6-1.ph3.x86_64
nspr-4.21-1.ph3.x86_64
nss-altfiles-2.23.0-1.ph3.x86_64
nss-libs-3.44-2.ph3.x86_64
openssh-7.8p1-5.ph3.x86_64
openssh-clients-7.8p1-5.ph3.x86_64
openssh-server-7.8p1-5.ph3.x86_64
openssl-1.0.2s-1.ph3.x86_64
ostree-2019.2-1.ph3.x86_64
ostree-grub2-2019.2-1.ph3.x86_64
ostree-libs-2019.2-1.ph3.x86_64
pcre-8.42-1.ph3.x86_64
pcre-libs-8.42-1.ph3.x86_64
photon-release-3.0-3.ph3.noarch
photon-repos-3.0-3.ph3.noarch
pinentry-1.1.0-1.ph3.x86_64
pkg-config-0.29.2-2.ph3.x86_64
polkit-0.113-5.ph3.x86_64
popt-1.16-5.ph3.x86_64
procps-ng-3.3.15-1.ph3.x86_64
python3-3.7.3-2.ph3.x86_64
python3-libs-3.7.3-2.ph3.x86_64
readline-7.0-2.ph3.x86_64
rpm-libs-4.14.2-4.ph3.x86_64
rpm-ostree-2019.3-1.ph3.x86_64
sed-4.5-1.ph3.x86_64
shadow-4.6-3.ph3.x86_64
shadow-tools-4.6-3.ph3.x86_64
sqlite-libs-3.27.2-3.ph3.x86_64
systemd-239-13.ph3.x86_64
util-linux-2.32-1.ph3.x86_64
util-linux-libs-2.32-1.ph3.x86_64
vim-8.1.0388-4.ph3.x86_64
which-2.21-5.ph3.x86_64
xz-5.2.4-1.ph3.x86_64
xz-libs-5.2.4-1.ph3.x86_64
zchunk-1.1.1-1.ph3.x86_64
zchunk-libs-1.1.1-1.ph3.x86_64
zlib-1.2.11-1.ph3.x86_64
Querying for package details
We are able to use the query option of rpm to make sure any package have been installed properly. The files list should match the previous file mappings in 4.2, so let's check package rpm-ostree. As we've seen, manual files listed here are actually missing, they were not installed.
root@photon-host [ /usr/share/man/man1 ]# rpm -ql rpm-ostree
/usr/bin/atomic
/usr/bin/rpm-ostree
/usr/lib/girepository-1.0/RpmOstree-1.0.typelib
/usr/lib/librpmostree-1.so.1
/usr/lib/librpmostree-1.so.1.0.0
/usr/lib/rpm-ostree
/usr/lib/rpm-ostree/tmpfiles-ostree-integration.conf
/usr/share/man/man1/atomic.1.gz
/usr/share/man/man1/rpm-ostree.1.gz
Why am I unable to install, upgrade or uninstall packages?
The OSTree host installer needs the server URL or the server repository.
When you perform the installation using the repo, the install packages are located under the layer package. When you install with the URL, the packages are located under the local packages.
You can use the rpm-ostree uninstall command to uninstall only the layered and local packages but not the base packages. To modify the base packages, you can use the rpm-ostree override command.
When you run rpm-ostree upgrade, the command will only upgrade packages based on the commit available in the server.