Using Volumes with vSphere Integrated Containers Engine

vSphere Integrated Containers Engine supports the use of container volumes.

IMPORTANT: To use container volume capabilities with vSphere Integrated Containers Engine, the vSphere administrator must configure the virtual container host (VCH) appropriately at the moment of deployment of the VCH. When the vSphere administrator creates a VCH, they must specify the datastore to use to store container volumes in the vic-machine create --volume-store option. You cannot currently add volume stores, and therefore volume capabilities, to a VCH after its initial deployment. For information about how to use the vic-machine create --volume-store option, see the section on volume-store in VCH Deployment Options in vSphere Integrated Containers for vSphere Administrators.

Obtain the List of Available Volume Stores
Obtain the List of Available Volumes
Create a Volume in a Volume Store
Creating Volumes from Images
Create a Container with a New Anonymous or Named Volume
Mount an Existing Volume on a Container
Obtain Information About a Volume
Delete a Named Volume from a Volume Store

For simplicity, the examples in this topic assume that the VCHs implement TLS authentication with self-signed server certificates, with no client verification.

Obtain the List of Available Volume Stores

To obtain the list of volume stores that are available on a VCH, run docker info.

docker -H virtual_container_host_address:2376 --tls info

The list of available volume stores for this VCH appears in the docker info output under VolumeStores.

[...]
Storage Driver: vSphere Integrated Containers Backend Engine
VolumeStores: volume_store_1 volume_store_2 ... volume_store_n
vSphere Integrated Containers Backend Engine: RUNNING
[...]

Obtain the List of Available Volumes

To obtain a list of volumes that are available on a VCH, run docker volume ls.

docker -H virtual_container_host_address:2376 --tls volume ls

DRIVER         VOLUME NAME
vsphere        volume_1
vsphere        volume_2
[...]          [...]
vsphere        volume_n

Create a Volume in a Volume Store

When you use the docker volume create command to create a volume, you can optionally provide a name for the volume by specifying the --name option. If you do not specify --name, docker volume create assigns a random UUID to the volume.

If the vSphere administrator created the VCH with one or more volume stores, but none of the volume stores are named default, you must specify the name of an existing volume store in the --opt VolumeStore option. If you do not specify --opt VolumeStore, docker volume create searches for a volume store named default, and returns an error if no such volume store exists.
```
docker -H virtual_container_host_address:2376 --tls volume create 
--opt VolumeStore=volume_store_label 
--name volume_name
```
If the vSphere administrator created the VCH with a volume store named default, you do not need to specify --opt VolumeStore in the docker volume create command. If you do not specify a volume store name, the docker volume create command automatically uses the default volume store if it exists.
```
docker -H virtual_container_host_address:2376 --tls volume create 
--name volume_name
```
You can optionally set the capacity of a volume by specifying the --opt Capacity option when you run docker volume create. If you do not specify the --opt Capacity option, the volume is created with the default capacity of 1024MB.

If you do not specify a unit for the capacity, the default unit will be in Megabytes.
```
docker -H virtual_container_host_address:2376 --tls volume create 
--opt VolumeStore=volume_store_label 
--opt Capacity=2048
--name volume_name
```
To create a volume with a capacity in megabytes, gigabytes, or terabytes, include MB, GB, or TB in the value that you pass to --opt Capacity. The unit is case insensitive.
```
docker -H virtual_container_host_address:2376 --tls volume create 
--opt VolumeStore=volume_store_label 
--opt Capacity=10GB
--name volume_name
```
vSphere Integrated Containers Engine currently only supports ext4 file systems for volumes.

After you create a volume by using docker volume create, you can mount that volume in a container by running either of the following commands:

docker -H virtual_container_host_address:2376 --tls 
create -v volume_name:/folder busybox

docker -H virtual_container_host_address:2376 --tls 
run -v volume_name:/folder busybox

In the examples above, Docker mounts the volume volume_name to /folder in the container.

NOTE: When using a vSphere Integrated Containers Engine VCH as your Docker endpoint, the storage driver is always the vSphere Integrated Containers Engine Backend Engine. If you specify the docker volume create --driver option an error stating that a bad driver has been selected will occur.

Creating Volumes from Images

Some images, for example, mongo or redis:alpine, contain volume bind information in their metadata. vSphere Integrated Containers Engine creates such volumes with the default parameters and treats them as anonymous volumes. vSphere Integrated Containers Engine treats all volume mount paths as unique, in the same way that Docker does. This should be kept in mind if you attempt to bind other volumes to the same location as anonymous or image volumes. A specified volume always takes priority over an anonymous volume.

If you require an image volume with a different volume capacity to the default, create a named volume with the required capacity. You can mount that named volume to the location that the image metadata specifies. You can find the location by running docker inspect image_name and consulting the Volumes section of the output. The resulting container has the required storage capacity and the endpoint.

Create a Container with a New Anonymous or Named Volume

If you intend to create named or anonymous volumes by using docker create -v when creating containers, a volume store named default must exist in the VCH.

NOTES:

vSphere Integrated Containers Engine does not support mounting folders as data volumes. A command such as docker create -v /folder_name:/folder_name busybox is not supported.
If you use docker create -v to create containers and mount new volumes on them, vSphere Integrated Containers Engine only supports the -r and -rw options.

Create a Container with a New Anonymous Volume

To create an anonymous volume, you include the path to the destination at which you want to mount the anonymous volume in the docker create -v command. Docker creates the anonymous volume in the default volume store, if it exists. The VCH mounts the anonymous volume on the container.

The docker create -v example below performs the following actions:

Creates a busybox container that uses an anonymous volume in the default volume store.
Mounts the volume to /volumes in the container.

docker -H virtual_container_host_address:2376 --tls 
create -v /volumes busybox

Create a Container with a Named Volume

To create a container with a new named volume, you specify a volume name in the docker create -v command. When you create containers that with named volumes, the VCH checks whether the volume exists in the volume store, and if it does not, creates it. The VCH mounts the existing or new volume on the container.

The docker create -v example below performs the following actions:

Creates a busybox container
Creates volume named volume_1 in the default volume store.
Mounts the volume to the /volumes folder in the container.

docker -H virtual_container_host_address:2376 --tls 
create -v volume_1:/volumes busybox

Mount an Existing Volume on a Container

Mounting existing volumes on containers is subject to the following limitations:

vSphere Integrated Containers Engine currently supports mounting a volume on only one container at a time.
Docker does not support unmounting a volume from a container, whether that container is running or not. When you mount a volume on a container by using docker create -v, that volume remains mounted on the container until you remove the container. When you have removed the container you can mount the volume onto a new container.
If you intend to create and mount a volume on one container, remove that container, and then mount the same volume on another container, use a named volume. It is possible to mount an anonymous volume on one container, remove that container, and then mount the anonymous volume on another container, but it is not recommended to do so.

The docker create -v example below performs the following operations:

Creates a container named container1 from the busybox image.
Mounts the named volume volume1 to the myData folder on that container, starts the container, and attaches to it.
After performing operations in volume1:/myData, stops and removes container1.
Creates a container named container2 from the Ubuntu image.
Mounts volume1 to the myData folder on container2.

docker -H virtual_container_host_address:2376 --tls 
create --name container1 -v volume1:/myData busybox
docker start container1
docker attach container1 

[Perform container operations and detach]

docker stop container1 
docker rm container1
docker create -it --name container2 -v volume1:/myData ubuntu
docker start container2 
docker attach container2 

[Perform container operations with the same volume that was 
previously mounted to container1]

Obtain Information About a Volume

To get information about a volume, run docker volume inspect and specify the name of the volume.

docker -H virtual_container_host_address:2376 --tls 
volume inspect volume_name

Delete a Named Volume from a Volume Store

To delete a volume, run docker volume rm and specify the name of the volume to delete.

docker -H virtual_container_host_address:2376 --tls 
volume rm volume_name

NOTE: vSphere Integrated Containers does not support running docker rm -v to remove volumes that are associated with a container.

Using Volumes