com.vmware.nsx.migration

Class SetupStub

java.lang.Object

com.vmware.vapi.internal.bindings.Stub

com.vmware.nsx.migration.SetupStub

All Implemented Interfaces:

Setup, SetupTypes, com.vmware.vapi.bindings.Service

public class SetupStub
extends com.vmware.vapi.internal.bindings.Stub
implements Setup

Remote stub implementation of the Setup API service.

WARNING: Internal class, subject to change in future versions.

Field Summary

Fields inherited from class com.vmware.vapi.internal.bindings.Stub

apiProvider, converter, ifaceId, retryPolicy, securityContext

Fields inherited from interface com.vmware.nsx.migration.SetupTypes

_VAPI_SERVICE_ID, SETESGTOROUTERMAPPINGOPTION_MAPPING_OPTION_FILE_UPLOAD, SETESGTOROUTERMAPPINGOPTION_MAPPING_OPTION_NO_MAPPING, SETESGTOROUTERMAPPINGOPTION_MAPPING_OPTION_UI

Constructor Summary

Constructors

Constructor and Description
SetupStub(com.vmware.vapi.core.ApiProvider apiProvider, com.vmware.vapi.bindings.StubConfigurationBase config)
SetupStub(com.vmware.vapi.core.ApiProvider apiProvider, com.vmware.vapi.internal.bindings.TypeConverter typeConverter, com.vmware.vapi.bindings.StubConfigurationBase config)

Method Summary

Modifier and Type	Method and Description
void	addalbinfo(AviEndPoint aviEndPoint) Add ALB endpoint details for non cross VC migration modes.
void	addalbinfo(AviEndPoint aviEndPoint, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) Add ALB endpoint details for non cross VC migration modes.
void	addalbinfo(AviEndPoint aviEndPoint, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add ALB endpoint details for non cross VC migration modes.
void	addalbinfo(AviEndPoint aviEndPoint, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add ALB endpoint details for non cross VC migration modes.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec) Add NSX-V to NSX-T site mapping.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) Add NSX-V to NSX-T site mapping.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add NSX-V to NSX-T site mapping.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add NSX-V to NSX-T site mapping.
MigrationSetupInfo	get() Get setup details of NSX-V to be migrated.
void	get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback) Get setup details of NSX-V to be migrated.
void	get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Get setup details of NSX-V to be migrated.
MigrationSetupInfo	get(com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Get setup details of NSX-V to be migrated.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	setesgtoroutermappingoption(java.lang.String mappingOption) Set the NSX-V ESG to NSX-T Router mapping option.
void	setesgtoroutermappingoption(java.lang.String mappingOption, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) Set the NSX-V ESG to NSX-T Router mapping option.
void	setesgtoroutermappingoption(java.lang.String mappingOption, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Set the NSX-V ESG to NSX-T Router mapping option.
void	setesgtoroutermappingoption(java.lang.String mappingOption, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Set the NSX-V ESG to NSX-T Router mapping option.
MigrationSetupInfo	update(MigrationSetupInfo migrationSetupInfo) Provide setup details of NSX-V to be migrated.
void	update(MigrationSetupInfo migrationSetupInfo, com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback) Provide setup details of NSX-V to be migrated.
void	update(MigrationSetupInfo migrationSetupInfo, com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Provide setup details of NSX-V to be migrated.
MigrationSetupInfo	update(MigrationSetupInfo migrationSetupInfo, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Provide setup details of NSX-V to be migrated.

Methods inherited from class com.vmware.vapi.internal.bindings.Stub

invokeMethod, invokeMethodAsync, invokeStreamMethod, toString

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail

SetupStub

public SetupStub(com.vmware.vapi.core.ApiProvider apiProvider,
                 com.vmware.vapi.internal.bindings.TypeConverter typeConverter,
                 com.vmware.vapi.bindings.StubConfigurationBase config)

SetupStub

public SetupStub(com.vmware.vapi.core.ApiProvider apiProvider,
                 com.vmware.vapi.bindings.StubConfigurationBase config)

Method Detail

addalbinfo

public void addalbinfo(AviEndPoint aviEndPoint)

Description copied from interface: Setup

Add ALB endpoint details for non cross VC migration modes.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Specified by:

addalbinfo in interface Setup

Parameters:

aviEndPoint - (required)

addalbinfo

public void addalbinfo(AviEndPoint aviEndPoint,
                       com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Add ALB endpoint details for non cross VC migration modes.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Specified by:

addalbinfo in interface Setup

Parameters:

aviEndPoint - (required)

invocationConfig - Configuration for the method invocation.

addalbinfo

public void addalbinfo(AviEndPoint aviEndPoint,
                       com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

Description copied from interface: Setup

Add ALB endpoint details for non cross VC migration modes.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

addalbinfo in interface Setup

Parameters:

aviEndPoint - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

addalbinfo

public void addalbinfo(AviEndPoint aviEndPoint,
                       com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                       com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Add ALB endpoint details for non cross VC migration modes.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

addalbinfo in interface Setup

Parameters:

aviEndPoint - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

addv2tsitemapping

public void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec)

Description copied from interface: Setup

Add NSX-V to NSX-T site mapping.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Specified by:

addv2tsitemapping in interface Setup

Parameters:

v2tSiteMappingSpec - (required)

addv2tsitemapping

public void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec,
                              com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Add NSX-V to NSX-T site mapping.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Specified by:

addv2tsitemapping in interface Setup

Parameters:

v2tSiteMappingSpec - (required)

invocationConfig - Configuration for the method invocation.

addv2tsitemapping

public void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec,
                              com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

Description copied from interface: Setup

Add NSX-V to NSX-T site mapping.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

addv2tsitemapping in interface Setup

Parameters:

v2tSiteMappingSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

addv2tsitemapping

public void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec,
                              com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                              com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Add NSX-V to NSX-T site mapping.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

addv2tsitemapping in interface Setup

Parameters:

v2tSiteMappingSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

get

public MigrationSetupInfo get()

Description copied from interface: Setup

Get setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Specified by:

get in interface Setup

Returns:

com.vmware.nsx.model.MigrationSetupInfo

get

public MigrationSetupInfo get(com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Get setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Specified by:

get in interface Setup

Parameters:

invocationConfig - Configuration for the method invocation.

Returns:

com.vmware.nsx.model.MigrationSetupInfo

get

public void get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback)

Description copied from interface: Setup

Get setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

get in interface Setup

Parameters:

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

get

public void get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback,
                com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Get setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

get in interface Setup

Parameters:

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

migratenewlyaddedhosttransportnode

public void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec)

Description copied from interface: Setup

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Specified by:

migratenewlyaddedhosttransportnode in interface Setup

Parameters:

newHostTransportNodeSpec - (required)

migratenewlyaddedhosttransportnode

public void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec,
                                               com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Specified by:

migratenewlyaddedhosttransportnode in interface Setup

Parameters:

newHostTransportNodeSpec - (required)

invocationConfig - Configuration for the method invocation.

migratenewlyaddedhosttransportnode

public void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec,
                                               com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

Description copied from interface: Setup

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

migratenewlyaddedhosttransportnode in interface Setup

Parameters:

newHostTransportNodeSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

migratenewlyaddedhosttransportnode

public void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec,
                                               com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                                               com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

migratenewlyaddedhosttransportnode in interface Setup

Parameters:

newHostTransportNodeSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

setesgtoroutermappingoption

public void setesgtoroutermappingoption(java.lang.String mappingOption)

Description copied from interface: Setup

Set the NSX-V ESG to NSX-T Router mapping option.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Specified by:

setesgtoroutermappingoption in interface Setup

Parameters:

mappingOption - Mapping option (required)

setesgtoroutermappingoption

public void setesgtoroutermappingoption(java.lang.String mappingOption,
                                        com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Set the NSX-V ESG to NSX-T Router mapping option.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Specified by:

setesgtoroutermappingoption in interface Setup

Parameters:

mappingOption - Mapping option (required)

invocationConfig - Configuration for the method invocation.

setesgtoroutermappingoption

public void setesgtoroutermappingoption(java.lang.String mappingOption,
                                        com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

Description copied from interface: Setup

Set the NSX-V ESG to NSX-T Router mapping option.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

setesgtoroutermappingoption in interface Setup

Parameters:

mappingOption - Mapping option (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

setesgtoroutermappingoption

public void setesgtoroutermappingoption(java.lang.String mappingOption,
                                        com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                                        com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Set the NSX-V ESG to NSX-T Router mapping option.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

setesgtoroutermappingoption in interface Setup

Parameters:

mappingOption - Mapping option (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

update

public MigrationSetupInfo update(MigrationSetupInfo migrationSetupInfo)

Description copied from interface: Setup

Provide setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Specified by:

update in interface Setup

Parameters:

migrationSetupInfo - (required)

Returns:

com.vmware.nsx.model.MigrationSetupInfo

update

public MigrationSetupInfo update(MigrationSetupInfo migrationSetupInfo,
                                 com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Provide setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Specified by:

update in interface Setup

Parameters:

migrationSetupInfo - (required)

invocationConfig - Configuration for the method invocation.

Returns:

com.vmware.nsx.model.MigrationSetupInfo

update

public void update(MigrationSetupInfo migrationSetupInfo,
                   com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback)

Description copied from interface: Setup

Provide setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

update in interface Setup

Parameters:

migrationSetupInfo - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

update

public void update(MigrationSetupInfo migrationSetupInfo,
                   com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback,
                   com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Description copied from interface: Setup

Provide setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Specified by:

update in interface Setup

Parameters:

migrationSetupInfo - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.