com.vmware.nsx.migration

Interface Setup

All Superinterfaces:

com.vmware.vapi.bindings.Service, SetupTypes

All Known Implementing Classes:

SetupStub

public interface Setup
extends com.vmware.vapi.bindings.Service, SetupTypes

Field Summary

Fields inherited from interface com.vmware.nsx.migration.SetupTypes

_VAPI_SERVICE_ID, SETESGTOROUTERMAPPINGOPTION_MAPPING_OPTION_FILE_UPLOAD, SETESGTOROUTERMAPPINGOPTION_MAPPING_OPTION_NO_MAPPING, SETESGTOROUTERMAPPINGOPTION_MAPPING_OPTION_UI

Method Summary

Modifier and Type	Method and Description
void	addalbinfo(AviEndPoint aviEndPoint) Add ALB endpoint details for non cross VC migration modes.
void	addalbinfo(AviEndPoint aviEndPoint, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) Add ALB endpoint details for non cross VC migration modes.
void	addalbinfo(AviEndPoint aviEndPoint, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add ALB endpoint details for non cross VC migration modes.
void	addalbinfo(AviEndPoint aviEndPoint, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add ALB endpoint details for non cross VC migration modes.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec) Add NSX-V to NSX-T site mapping.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) Add NSX-V to NSX-T site mapping.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add NSX-V to NSX-T site mapping.
void	addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Add NSX-V to NSX-T site mapping.
MigrationSetupInfo	get() Get setup details of NSX-V to be migrated.
void	get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback) Get setup details of NSX-V to be migrated.
void	get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Get setup details of NSX-V to be migrated.
MigrationSetupInfo	get(com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Get setup details of NSX-V to be migrated.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) This API is to support the add Host workflow on NSX-T once the V2T migration process has started.
void	setesgtoroutermappingoption(java.lang.String mappingOption) Set the NSX-V ESG to NSX-T Router mapping option.
void	setesgtoroutermappingoption(java.lang.String mappingOption, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback) Set the NSX-V ESG to NSX-T Router mapping option.
void	setesgtoroutermappingoption(java.lang.String mappingOption, com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Set the NSX-V ESG to NSX-T Router mapping option.
void	setesgtoroutermappingoption(java.lang.String mappingOption, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Set the NSX-V ESG to NSX-T Router mapping option.
MigrationSetupInfo	update(MigrationSetupInfo migrationSetupInfo) Provide setup details of NSX-V to be migrated.
void	update(MigrationSetupInfo migrationSetupInfo, com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback) Provide setup details of NSX-V to be migrated.
void	update(MigrationSetupInfo migrationSetupInfo, com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Provide setup details of NSX-V to be migrated.
MigrationSetupInfo	update(MigrationSetupInfo migrationSetupInfo, com.vmware.vapi.bindings.client.InvocationConfig invocationConfig) Provide setup details of NSX-V to be migrated.

Method Detail

addalbinfo

void addalbinfo(AviEndPoint aviEndPoint)

Add ALB endpoint details for non cross VC migration modes.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Parameters:

aviEndPoint - (required)

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

addalbinfo

void addalbinfo(AviEndPoint aviEndPoint,
                com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Add ALB endpoint details for non cross VC migration modes.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Parameters:

aviEndPoint - (required)

invocationConfig - Configuration for the method invocation.

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

addalbinfo

void addalbinfo(AviEndPoint aviEndPoint,
                com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

Add ALB endpoint details for non cross VC migration modes.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

aviEndPoint - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

addalbinfo

void addalbinfo(AviEndPoint aviEndPoint,
                com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Add ALB endpoint details for non cross VC migration modes.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

aviEndPoint - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

addv2tsitemapping

void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec)

Add NSX-V to NSX-T site mapping.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Parameters:

v2tSiteMappingSpec - (required)

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

addv2tsitemapping

void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec,
                       com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Add NSX-V to NSX-T site mapping.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Parameters:

v2tSiteMappingSpec - (required)

invocationConfig - Configuration for the method invocation.

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

addv2tsitemapping

void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec,
                       com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

Add NSX-V to NSX-T site mapping.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

v2tSiteMappingSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

addv2tsitemapping

void addv2tsitemapping(V2tSiteMappingSpec v2tSiteMappingSpec,
                       com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                       com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Add NSX-V to NSX-T site mapping.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

v2tSiteMappingSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

get

MigrationSetupInfo get()

Get setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Returns:

com.vmware.nsx.model.MigrationSetupInfo

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

get

MigrationSetupInfo get(com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Get setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Parameters:

invocationConfig - Configuration for the method invocation.

Returns:

com.vmware.nsx.model.MigrationSetupInfo

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

get

void get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback)

Get setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

get

void get(com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback,
         com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Get setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

migratenewlyaddedhosttransportnode

void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec)

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Parameters:

newHostTransportNodeSpec - (required)

Throws:

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

migratenewlyaddedhosttransportnode

void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec,
                                        com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Parameters:

newHostTransportNodeSpec - (required)

invocationConfig - Configuration for the method invocation.

Throws:

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

migratenewlyaddedhosttransportnode

void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec,
                                        com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

newHostTransportNodeSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

migratenewlyaddedhosttransportnode

void migratenewlyaddedhosttransportnode(NewHostTransportNodeSpec newHostTransportNodeSpec,
                                        com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                                        com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

This API is to support the add Host workflow on NSX-T once the V2T migration process has started. There are two high level cases. For each case, please refer to the detailed steps. Case - 1 : For migration mode - CONFIG_AND_EDGE_MIGRATION_WITH_BYOT, CONFIG_AND_EDGE_MIGRATION_WITH_BYOT_ON_FEDERATION 1. Verify that overall migration status is in SUCCESS state in migration co-ordinator. This means all migration stages are completed and we are at a point where we can move workloads using the pre-migrate, post-migrate API's. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once API is successful, make sure that newly added HOST can take worklods (Ex: Traffic checks, etc.,). For Case-1, this API should be invoked only when following conditions are met. - The overall migration status is in SUCCESS status. - All the migration stages are completed and we are at a point where we can move workloads. - The migration mode selected has to be among the ones designated for case-1 - The new host has been added to a cluster by following all the steps mentioned in product documentation. Case - 2 : For migration modes that perform HOST migration. 1. Verify that overall migration status is in PAUSED state in migration co-ordinator. 2. Follow steps mentioned in product documentation to add a new host to cluster. 3. Invoke the migration co-ordinator sync HOST groups API. This will result in migration co-ordinator updating its inventory and accouting for the newly added host transport node. At this point, the list host upgrade units API call to MC will also show the newly added host transport node. But do NOT resume the migration. Since this host transport node is added after the V2T migration has started, we need to perform migration steps on this host through this special API (Accept Host Transport Node) 4. Invoke this API (Accept Host Transport Node) to perform the V2T migration steps on newly added host transport node. Once the API is successful, we should be seeing that migration status has been marked as SUCCESS for the newly added host transport node. Very Importnant Note : Make sure that migration status is PAUSED in migration co-ordinator when performing steps 2 through 4. Also ensure that all the steps 2 through 4 pass without failures. For Case-2, this API should be invoked only when following conditions are met. - The overall migration status is in PAUSED status. - The migration mode selected has HOST component in it. - All the migration stages before HOST stage are completed. - The new host has been added to a cluster by following all the steps mentioned in product documentation.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

newHostTransportNodeSpec - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

setesgtoroutermappingoption

void setesgtoroutermappingoption(java.lang.String mappingOption)

Set the NSX-V ESG to NSX-T Router mapping option.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Parameters:

mappingOption - Mapping option (required)

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

setesgtoroutermappingoption

void setesgtoroutermappingoption(java.lang.String mappingOption,
                                 com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Set the NSX-V ESG to NSX-T Router mapping option.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Parameters:

mappingOption - Mapping option (required)

invocationConfig - Configuration for the method invocation.

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

setesgtoroutermappingoption

void setesgtoroutermappingoption(java.lang.String mappingOption,
                                 com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback)

Set the NSX-V ESG to NSX-T Router mapping option.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

mappingOption - Mapping option (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

setesgtoroutermappingoption

void setesgtoroutermappingoption(java.lang.String mappingOption,
                                 com.vmware.vapi.bindings.client.AsyncCallback<java.lang.Void> asyncCallback,
                                 com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Set the NSX-V ESG to NSX-T Router mapping option.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

mappingOption - Mapping option (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.

update

MigrationSetupInfo update(MigrationSetupInfo migrationSetupInfo)

Provide setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value.

Parameters:

migrationSetupInfo - (required)

Returns:

com.vmware.nsx.model.MigrationSetupInfo

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

update

MigrationSetupInfo update(MigrationSetupInfo migrationSetupInfo,
                          com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Provide setup details of NSX-V to be migrated.

Synchronous method overload. Result of the invocation will be reported as a method return value. Use invocationConfig to specify configuration for this particular invocation.

Parameters:

migrationSetupInfo - (required)

invocationConfig - Configuration for the method invocation.

Returns:

com.vmware.nsx.model.MigrationSetupInfo

Throws:

com.vmware.vapi.std.errors.Unauthenticated - Unauthorized

com.vmware.vapi.std.errors.InvalidRequest - Bad Request, Precondition Failed

com.vmware.vapi.std.errors.Unauthorized - Forbidden

com.vmware.vapi.std.errors.ServiceUnavailable - Service Unavailable

com.vmware.vapi.std.errors.InternalServerError - Internal Server Error

com.vmware.vapi.std.errors.NotFound - Not Found

update

void update(MigrationSetupInfo migrationSetupInfo,
            com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback)

Provide setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

migrationSetupInfo - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

update

void update(MigrationSetupInfo migrationSetupInfo,
            com.vmware.vapi.bindings.client.AsyncCallback<MigrationSetupInfo> asyncCallback,
            com.vmware.vapi.bindings.client.InvocationConfig invocationConfig)

Provide setup details of NSX-V to be migrated.

Asynchronous method overload. Result of the invocation will be reported via the specified asyncCallback. Use invocationConfig to specify configuration for this particular invocation.

Invocation Result:
com.vmware.nsx.model.MigrationSetupInfo

Operation Errors:
Unauthenticated - Unauthorized
InvalidRequest - Bad Request, Precondition Failed
Unauthorized - Forbidden
ServiceUnavailable - Service Unavailable
InternalServerError - Internal Server Error
NotFound - Not Found

Parameters:

migrationSetupInfo - (required)

asyncCallback - Receives the status (progress, result or error) of the operation invocation.

invocationConfig - Configuration for the method invocation.