com.vmware.vcenter package

Subpackages

Submodules

com.vmware.vcenter.authentication_client module

The com.vmware.vcenter.authentication_client module provides authentication classes specific to the com.vmware.vcenter module. The com.vmware.vcenter.authentication_client module is available starting in vSphere 7.0 U2.

class com.vmware.vcenter.authentication_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.authentication_client.Token(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Token interface provides operations for obtaining an access token.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class IssueSpec(grant_type=None, resource=None, audience=None, scope=None, requested_token_type=None, subject_token=None, subject_token_type=None, actor_token=None, actor_token_type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Token.IssueSpec class contains arguments required for token exchange.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • grant_type (str) – The value of urn:ietf:params:oauth:grant-type:token-exchange indicates that a token exchange is being performed. When clients pass a value of this class as a parameter, the attribute must be one of urn:ietf:params:oauth:grant-type:token-exchange. When methods return a value of this class as a return value, the attribute will be one of urn:ietf:params:oauth:grant-type:token-exchange.

  • resource (str or None) – Indicates the location of the target service or resource where the client intends to use the requested security token. If None, it is inferred from other arguments.

  • audience (str or None) – The logical name of the target service where the client intends to use the requested security token. This serves a purpose similar to the Token.IssueSpec.resource attribute, but with the client providing a logical name rather than a location. If None, it is inferred from other arguments.

  • scope (str or None) – A list of space-delimited, case-sensitive strings, that allow the client to specify the desired scope of the requested security token in the context of the service or resource where the token will be used. If None, it is inferred from other arguments.

  • requested_token_type (str or None) – An identifier for the type of the requested security token. If the requested type is unspecified, the issued token type is at the discretion of the server and may be dictated by knowledge of the requirements of the service or resource indicated by the Token.IssueSpec.resource or Token.IssueSpec.audience attribute. If None, it is inferred from other arguments.

  • subject_token (str or None) –

    A security token that represents the identity of the party on behalf of whom exchange is being made. Typically, the subject of this token will be the subject of the security token issued. Token is base64-encoded.

    The attribute is required when the value of the Token.IssueSpec.grant_type attribute is urn:ietf:params:oauth:grant-type:token-exchange. This attribute is currently required. In the future, the class may support grant-types other than urn:ietf:params:oauth:grant-type:token-exchange for which the value may be None.

  • subject_token_type (str or None) –

    An identifier, that indicates the type of the security token in the Token.IssueSpec.subject_token attribute.

    The attribute is required when the value of the Token.IssueSpec.grant_type attribute is urn:ietf:params:oauth:grant-type:token-exchange. This attribute is currently required. In the future, the class may support grant-types other than urn:ietf:params:oauth:grant-type:token-exchange for which the value may be None.

  • actor_token (str or None) – A security token that represents the identity of the acting party. Typically, this will be the party that is authorized to use the requested security token and act on behalf of the subject. None if not needed for the specific case of exchange.

  • actor_token_type (str or None) – An identifier, that indicates the type of the security token in the Token.IssueSpec.actor_token attribute. None if Token.IssueSpec.actor_token attribute is not present.

issue(spec)

Provides a token endpoint as defined in RFC 6749.

Supported grant types:

This method supercedes com.vmware.vcenter.tokenservice.TokenExchange#exchange. The REST rendering of the newer operation matches RFC8693’s definition for both input and output of the method.

Parameters

spec (Token.IssueSpec) – Token.IssueSpec class containing arguments that define the exchange process.

Return type

com.vmware.oauth2_client.TokenInfo

Returns

com.vmware.oauth2_client.TokenInfo class that contains a newly issued token.

Raise

com.vmware.oauth2.errors_client.InvalidRequest if Token.IssueSpec is missing a required attribute, includes an unsupported attribute value (other than Token.IssueSpec.grant_type).

Raise

com.vmware.oauth2.errors_client.InvalidGrant provided authorization grant (e.g., authorization code, resource owner credentials) or refresh token is invalid, expired, revoked, does not match the redirection URI used in the authorization request, or was issued to another client.

Raise

com.vmware.oauth2.errors_client.InvalidScope If the server is unwilling or unable to issue a token for all the target services indicated by the Token.IssueSpec.resource or Token.IssueSpec.audience attributes.

com.vmware.vcenter.certificate_management_client module

The com.vmware.vcenter.certificate_management_client module provides classes to manage certificates.

class com.vmware.vcenter.certificate_management_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.certificate_management_client.X509CertChain(cert_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The X509CertChain class contains x509 certificate chain. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

cert_chain (list of str) – Certificate chain in base64 format. This attribute was added in vSphere API 6.7.2.

com.vmware.vcenter.compute_client module

The com.vmware.vcenter.compute_client module provides classes for managing compute policies.

class com.vmware.vcenter.compute_client.Policies(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Policies class provides methods to manage compute policies. A compute policy defines the intended behavior for a collection of vSphere objects identified by a tag. A compute policy is an instance of a capability. It is created by providing a value for the creation type specified by the capability. See com.vmware.vcenter.compute.policies_client.Capabilities.Info.create_spec_type.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

RESOURCE_TYPE = 'com.vmware.vcenter.compute.Policy'

The resource type for the compute policy.

class Summary(policy=None, name=None, description=None, capability=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Policies.Summary class contains commonly used information about a compute policy.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • policy (str) – Identifier of the policy. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.compute.Policy. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.compute.Policy.

  • name (str) – Name of the policy.

  • description (str) – Description of the policy.

  • capability (str) – Identifier of the capability this policy is based on. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.compute.policies.Capability. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.compute.policies.Capability.

create(spec)

Creates a new compute policy.

Parameters

spec (vmware.vapi.struct.VapiStruct) – Specification for the new policy to be created. The new policy will be an instance of the capability that has the creation type (see com.vmware.vcenter.compute.policies_client.Capabilities.Info.create_spec_type) equal to the type of the specified value (see spec). The parameter must contain all the attributes defined in com.vmware.vcenter.compute.policies_client.CreateSpec.

Return type

str

Returns

The identifier of the newly created policy. Use this identifier to get or destroy the policy. The return value will be an identifier for the resource type: com.vmware.vcenter.compute.Policy.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a policy with the same name is already present on this vCenter server.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if a parameter passed in the spec is invalid.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if more than 100 policies are created.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires ComputePolicy.Manage.

delete(policy)

Deletes a specific compute policy.

Parameters

policy (str) – Identifier of the policy to be deleted. The parameter must be an identifier for the resource type: com.vmware.vcenter.compute.Policy.

Raise

com.vmware.vapi.std.errors_client.NotFound if a policy with this identifier does not exist.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires ComputePolicy.Manage.

get(policy)

Returns information about a specific compute policy.

Parameters

policy (str) – Identifier of the policy for which information should be retrieved. The parameter must be an identifier for the resource type: com.vmware.vcenter.compute.Policy.

Return type

vmware.vapi.struct.VapiStruct

Returns

Detailed information about the specified compute policy. The returned value can be converted to the information type of the capability that this policy is based on. See com.vmware.vcenter.compute.policies_client.Capabilities.Info.info_type. The return value will contain all the attributes defined in com.vmware.vcenter.compute.policies_client.Info.

Raise

com.vmware.vapi.std.errors_client.NotFound if a policy with this identifier does not exist.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

list()

Returns information about the compute policies available in this vCenter server.

Return type

list of Policies.Summary

Returns

The list of compute policies available on this vCenter server.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

class com.vmware.vcenter.compute_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.crypto_manager_client module

The com.vmware.vcenter.crypto_manager_client module provides classes for managing key providers and cryptographic keys.

class com.vmware.vcenter.crypto_manager_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.datastore_client module

class com.vmware.vcenter.datastore_client.DefaultPolicy(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The DefaultPolicy class provides methods related to storage policies associated with datastore object. The DefaultPolicy.get() method provides information about the default storage policy associated with the specific datastore. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

get(datastore)

Returns the identifier of the current default storage policy associated with the specified datastore. This method was added in vSphere API 6.7.

Parameters

datastore (str) – Identifier of the datastore for which the default policy is requested. The parameter must be an identifier for the resource type: Datastore.

Return type

str or None

Returns

Identifier of the default storage policy associated with the specified datastore. The return value will be an identifier for the resource type: com.vmware.vcenter.StoragePolicy. this field is None if there is no default storage policy associated with the datastore.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the specified datastore does not exist.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have the required priveleges.

class com.vmware.vcenter.datastore_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.deployment_client module

class com.vmware.vcenter.deployment_client.ApplianceSize(string)

Bases: vmware.vapi.bindings.enum.Enum

The ApplianceSize class defines the vCenter Server Appliance sizes. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ApplianceSize instance.

LARGE = ApplianceSize(string='LARGE')

Appliance size of ‘large’. This class attribute was added in vSphere API 7.0.0.0.

MEDIUM = ApplianceSize(string='MEDIUM')

Appliance size of ‘medium’. This class attribute was added in vSphere API 7.0.0.0.

SMALL = ApplianceSize(string='SMALL')

Appliance size of ‘small’. This class attribute was added in vSphere API 7.0.0.0.

TINY = ApplianceSize(string='TINY')

Appliance size of ‘tiny’. This class attribute was added in vSphere API 7.0.0.0.

XLARGE = ApplianceSize(string='XLARGE')

Appliance size of ‘extra large’. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.deployment_client.ApplianceState(string)

Bases: vmware.vapi.bindings.enum.Enum

The ApplianceState class defines the various states the vCenter Appliance can be in. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ApplianceState instance.

CONFIGURED = ApplianceState(string='CONFIGURED')

The appliance has been configured. This class attribute was added in vSphere API 6.7.

CONFIG_IN_PROGRESS = ApplianceState(string='CONFIG_IN_PROGRESS')

The appliance is in the process of being configured. This class attribute was added in vSphere API 6.7.

FAILED = ApplianceState(string='FAILED')

The appliance configuration has failed. This class attribute was added in vSphere API 6.7.

INITIALIZED = ApplianceState(string='INITIALIZED')

The appliance is initialized and ready to be configured. This class attribute was added in vSphere API 6.7.

NOT_INITIALIZED = ApplianceState(string='NOT_INITIALIZED')

The appliance is in the process of being initialized and not ready for configuration. This class attribute was added in vSphere API 6.7.

QUESTION_RAISED = ApplianceState(string='QUESTION_RAISED')

The deployment script has raised a question and is waiting for an answer to continue with the appliance configuration. This class attribute was added in vSphere API 6.7.

class com.vmware.vcenter.deployment_client.ApplianceType(string)

Bases: vmware.vapi.bindings.enum.Enum

The ApplianceType class defines the vCenter appliance types. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ApplianceType instance.

PSC_EXTERNAL = ApplianceType(string='PSC_EXTERNAL')

An external Platform Services Controller. This class attribute was added in vSphere API 6.7.

VCSA_EMBEDDED = ApplianceType(string='VCSA_EMBEDDED')

vCenter Server Appliance with an embedded Platform Services Controller. This class attribute was added in vSphere API 6.7.

VCSA_EXTERNAL = ApplianceType(string='VCSA_EXTERNAL')

vCenter Server Appliance with an external Platform Services Controller. This class attribute was added in vSphere API 6.7.

class com.vmware.vcenter.deployment_client.CheckInfo(status=None, result=None, source_info=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CheckInfo class describes the result of the appliance deployment check. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • status (CheckStatus) – Status of the check. This attribute was added in vSphere API 6.7.

  • result (Notifications or None) – Result of the check. This attribute was added in vSphere API 6.7. This attribute will be None if result is not available at the current step of the task.

  • source_info (SourceInfo or None) – Information collected from the source machine. This attribute was added in vSphere API 7.0.0.0. This attribute is used only for upgrade and migrate.

class com.vmware.vcenter.deployment_client.CheckStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The CheckStatus class defines the status of the checks. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the CheckStatus instance.

FAILED = CheckStatus(string='FAILED')

A fatal error was encountered when running the sanity checks. This class attribute was added in vSphere API 6.7.

SUCCESS = CheckStatus(string='SUCCESS')

All checks have completed successfully. This class attribute was added in vSphere API 6.7.

class com.vmware.vcenter.deployment_client.DataMigrationEstimate(estimated_export_time=None, estimated_import_time=None, required_free_disk_space_on_source=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DataMigrationEstimate {class contains estimated time and disk space required for the vCenter Server database migration. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • estimated_export_time (long) – The time estimated to export data from the source vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • estimated_import_time (long) – The time estimated to import data to the upgraded vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • required_free_disk_space_on_source (float) – The extra free space required on source vCenter Server. This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.deployment_client.DataMigrationInfo(core=None, core_events_tasks=None, all=None, core_events_tasks_with_deferred=None, all_with_deferred=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DataMigrationInfo {class contains the disk space requirements and time estimates for the different choices available to migrate the vCenter Server data. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • core (DataMigrationEstimate) – Migrate only core data and configuration from vCenter Server. Events, tasks, and stats will not be migrated. This attribute was added in vSphere API 7.0.0.0.

  • core_events_tasks (DataMigrationEstimate) – Migrate core, events, and tasks from vCenter Server. Stats will not be migrated. This attribute was added in vSphere API 7.0.0.0.

  • all (DataMigrationEstimate) – Migrate all data from vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • core_events_tasks_with_deferred (DataMigrationEstimate or None) – Migrate core, events, and tasks from vCenter Server. Events and tasks will be migrated after the upgrade. Stats will not be migrated. This attribute was added in vSphere API 7.0.0.0. This attribute will be available only if the source database is using an external database.

  • all_with_deferred (DataMigrationEstimate or None) – Migrate all data from vCenter Server. Events, tasks, and stats will be migrated after the upgrade. This attribute was added in vSphere API 7.0.0.0. This attribute will be available only if the source database is using an external database.

class com.vmware.vcenter.deployment_client.HistoryMigrationOption(string)

Bases: vmware.vapi.bindings.enum.Enum

The HistoryMigrationOption class defines the vCenter history migration option choices. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the HistoryMigrationOption instance.

ALL = HistoryMigrationOption(string='ALL')

All history data will be migrated along with the core data. This class attribute was added in vSphere API 6.7.

EVENTS_TASKS = HistoryMigrationOption(string='EVENTS_TASKS')

Only event data and task data will be migrated along with the core data. This class attribute was added in vSphere API 6.7.

class com.vmware.vcenter.deployment_client.HistoryMigrationSpec(data_set=None, defer_import=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The HistoryMigrationSpec class defines how vCenter history data will be migrated. vCenter History data includes

  • Statistics

  • Events

  • Tasks

. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • data_set (HistoryMigrationOption) – Defines what part of vCenter historical data will be migrated along with core data. This attribute was added in vSphere API 6.7.

  • defer_import (bool or None) – Defines how vCenter history will be migrated. If set to true, vCenter history will be migrated separately after successful upgrade(supported scenarios are upgrade from 6.0 or 6.5 to 6.7) or migration, otherwise it will be migrated along with core data during the upgrade or migration process. vCSA upgrade with deferred import is no longer supported for target version 7.0 and later. This attribute was added in vSphere API 6.7. If None, vCenter historical data won’t be deferred and will be migrated along with core data.

class com.vmware.vcenter.deployment_client.ImportHistory(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The ImportHistory class provides methods for managing the import of vCenter historical data, e.g. Tasks, Events and Statistics, when is is imported separately from the upgrade or migration process. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(name=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ImportHistory.CreateSpec class contains information to create and start vCenter historical data deferred import. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – Name of the vCenter history import task. This attribute was added in vSphere API 6.7.

  • description (str) – Description of the vCenter history import task. This attribute was added in vSphere API 6.7.

class Info(progress=None, result=None, description=None, service=None, operation=None, parent=None, target=None, status=None, cancelable=None, error=None, start_time=None, end_time=None, user=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ImportHistory.Info class contains attributes to describe the state of vCenter history import task. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • progress (com.vmware.cis.task_client.Progress) – The progress info of this task. This attribute was added in vSphere API 6.7. This attribute is optional and it is only relevant when the value of CommonInfo#status is one of com.vmware.cis.task_client.Status.RUNNING, com.vmware.cis.task_client.Status.FAILED, com.vmware.cis.task_client.Status.BLOCKED, or com.vmware.cis.task_client.Status.SUCCEEDED.

  • result (Notifications or None) – Result of the operation. If an operation reports partial results before it completes, this attribute could be set before the com.vmware.cis.task_client.CommonInfo.status has the value com.vmware.cis.task_client.Status.SUCCEEDED. The value could change as the operation progresses. This attribute was added in vSphere API 6.7. This attribute will be None if result is not available at the current step of the operation.

  • description (com.vmware.vapi.std_client.LocalizableMessage) – Description of the operation associated with the task.

  • service (str) – Identifier of the service containing the operation. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vapi.service. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vapi.service.

  • operation (str) – Identifier of the operation associated with the task. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vapi.operation. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vapi.operation.

  • parent (str or None) – Parent of the current task. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.cis.task. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.cis.task. This attribute will be None if the task has no parent.

  • target (com.vmware.vapi.std_client.DynamicID or None) – Identifier of the target created by the operation or an existing one the operation performed on. This attribute will be None if the operation has no target or multiple targets.

  • status (com.vmware.cis.task_client.Status) – Status of the operation associated with the task.

  • cancelable (bool) – Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses.

  • error (Exception or None) – Description of the error if the operation status is “FAILED”. If None the description of why the operation failed will be included in the result of the operation (see com.vmware.cis.task_client.Info.result).

  • start_time (datetime.datetime) – Time when the operation is started. This attribute is optional and it is only relevant when the value of status is one of com.vmware.cis.task_client.Status.RUNNING, com.vmware.cis.task_client.Status.BLOCKED, com.vmware.cis.task_client.Status.SUCCEEDED, or com.vmware.cis.task_client.Status.FAILED.

  • end_time (datetime.datetime) – Time when the operation is completed. This attribute is optional and it is only relevant when the value of status is one of com.vmware.cis.task_client.Status.SUCCEEDED or com.vmware.cis.task_client.Status.FAILED.

  • user (str or None) – Name of the user who performed the operation. This attribute will be None if the operation is performed by the system.

cancel()

Cancels the task for importing vCenter historical data. This method was added in vSphere API 6.7.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the caller is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if vCenter historical data import task cannot be canceled at this state. This can happen in the following cases:

  • If historical data import has not been started yet because a not running task cannot be canceled

  • If historical data import has already been completed because a completed task cannot be canceled

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if vCenter historical data import task is already canceled.

Raise

com.vmware.vapi.std.errors_client.Error Generic error.

get()

Get the current status of the vCenter historical data import. This method was added in vSphere API 6.7.

Return type

ImportHistory.Info

Returns

Info structure containing the status information about the historical data import status.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the caller is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Error Generic error

pause()

Pauses the task for importing vCenter historical data. This method was added in vSphere API 6.7.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the caller is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if vCenter historical data import task cannot be paused at this time. Pause can be accepted only in com.vmware.cis.task_client.Status.RUNNING state.

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if vCenter historical data import task is already paused

Raise

com.vmware.vapi.std.errors_client.Error Generic error

resume()

Resumes the task for importing vCenter historical data. This method was added in vSphere API 6.7.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the caller is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if vCenter historical data import task cannot be resumed at this state. Resume can be accepted only in com.vmware.cis.task_client.Status.BLOCKED state

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if vCenter historical data import task is already resumed.

Raise

com.vmware.vapi.std.errors_client.Error Generic error.

start(spec=None)

Creates and starts task for importing vCenter historical data. This method was added in vSphere API 6.7.

Parameters

spec (ImportHistory.CreateSpec or None) –

An optional ImportHistory.CreateSpec info that can be passed for creating a new historical data import task and starts it. If None, default value will be:

  • name : vcenter.deployment.history.import

  • description : vCenter Server history import

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the caller is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if vCenter historical data import task cannot be started at this time. This can happen in the following cases:

  • If historical data import has already been canceled because a canceled task cannot be re-started

  • If historical data import has already been completed because a completed task cannot be re-started

  • If historical data import has already been paused because a paused task can only be resumed or canceled

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if vCenter historical data import task has already being started.

Raise

com.vmware.vapi.std.errors_client.Error Generic error

class com.vmware.vcenter.deployment_client.Install(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Install class provides methods to configure the installation of the appliance. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class InstallSpec(vcsa_embedded=None, auto_answer=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Install.InstallSpec class contains information used to configure the appliance installation. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • vcsa_embedded (Install.VcsaEmbeddedSpec) – Spec used to configure an embedded vCenter Server. This field describes how the embedded vCenter Server appliance should be configured. This attribute was added in vSphere API 6.7.

  • auto_answer (bool or None) – Use the default option for any questions that may come up during appliance configuration. This attribute was added in vSphere API 6.7. If None, will default to false.

class VcsaEmbeddedSpec(standalone=None, replicated=None, ceip_enabled=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Install.VcsaEmbeddedSpec class contains information used to configure an embedded standalone or replicated vCenter Server. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • standalone (StandaloneSpec or None) – Spec used to configure a standalone embedded vCenter Server. This field describes how the standalone vCenter Server appliance should be configured. This attribute was added in vSphere API 6.7. If None, will default to None.

  • replicated (ReplicatedSpec or None) – Spec used to configure a replicated embedded vCenter Server. This field describes how the replicated vCenter Server appliance should be configured. This attribute was added in vSphere API 6.7. If None, will default to None.

  • ceip_enabled (bool) – Whether CEIP should be enabled or disabled. This attribute was added in vSphere API 6.7.

cancel()

Cancel the appliance installation that is in progress. This method was added in vSphere API 6.7.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in CONFIG_IN_PROGRESS state and if the operation is not INSTALL.

check(spec)

Run sanity checks using the InstallSpec parameters passed. This method was added in vSphere API 6.7.

Parameters

spec (Install.InstallSpec) – InstallSpec parameters to run sanity check with.

Return type

CheckInfo

Returns

CheckInfo containing the check results.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if external PSC credentials are not valid when configuring PSC to replicate with an external existing PSC.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if external PSC credentials are not valid when configuring a VCSA_EXTERNAL appliance.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in INITIALIZED state.

get()

Get the parameters used to configure the ongoing appliance installation. This method was added in vSphere API 6.7.

Return type

Install.InstallSpec

Returns

InstallSpec parameters being used to configure appliance install.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if appliance is not in INSTALL_PROGRESS state.

start(spec)

Start the appliance installation. This method was added in vSphere API 6.7.

Parameters

spec (Install.InstallSpec) – InstallSpec parameters to configure the appliance install.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the partner PSC credentials are not valid when configuring PSC to replicate with partner PSC.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if external PSC credentials are not valid when configuring a VCSA_EXTERNAL appliance.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in INITIALIZED state.

class com.vmware.vcenter.deployment_client.LocationSpec(hostname=None, https_port=None, ssl_thumbprint=None, ssl_verify=None, username=None, password=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LocationSpec class is used to pass the container ESXi or vCenter server of the VM to patch the size of this appliance. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (str) – The IP address or DNS resolvable name of the container. This attribute was added in vSphere API 6.7.

  • https_port (long or None) – The HTTPS port of the container. This attribute was added in vSphere API 6.7. If None, port 443 will be used.

  • ssl_thumbprint (str or None) – SHA1 thumbprint of the server SSL certificate will be used for verification. This attribute was added in vSphere API 6.7. This attribute is only relevant if sslVerify is None or has the value true.

  • ssl_verify (bool or None) – SSL verification should be enabled or disabled. If sslVerify is true and and sslThumbprint is None, the CA certificate will be used for verification. If sslVerify is true and sslThumbprint is set then the thumbprint will be used for verification. No verification will be performed if sslVerify value is set to false. This attribute was added in vSphere API 6.7. If None, ssl_verify true will be used.

  • username (str) – The administrator account on the host. This attribute was added in vSphere API 6.7.

  • password (str) – The administrator account password. This attribute was added in vSphere API 6.7.

class com.vmware.vcenter.deployment_client.Migrate(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Migrate class provides methods to configure the migration of this appliance from an existing vCenter for Windows. This class was added in vSphere API 7.0.0.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class MigrateSpec(source_vc_windows=None, existing_migration_assistant=None, history=None, vcsa_embedded=None, psc=None, active_directory=None, auto_answer=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Migrate.MigrateSpec class contains the fields to migrate an existing vCenter Server for Windows to an appliance. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • source_vc_windows (Migrate.SourceVcWindows) – Information specific to the Windows vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • existing_migration_assistant (Migrate.MigrationAssistantSpec) – Information specific to the Migration Assistant that is running on the Windows vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • history (HistoryMigrationSpec or None) –

    Determines how vCenter history will be migrated during the migration process. vCenter history consists of:

    • Statistics

    • Events

    • Tasks

    By default only core data will be migrated. Use this spec to define which part of vCenter history data will be migrated and when. This attribute was added in vSphere API 7.0.0.0. If None, only core database content will be migrated.

  • vcsa_embedded (Migrate.VcsaEmbeddedSpec or None) – Information specific to an embedded vCenter Server. This attribute was added in vSphere API 7.0.0.0. Only required if the vCenter Server that is going to be migrated is an embedded vCenter Server.

  • psc (Migrate.PscSpec or None) – Information specific to a Platform Services Controller. This attribute was added in vSphere API 7.0.0.0. Only required if the vCenter Server that is going to be migrated is a Platform Services Controller.

  • active_directory (com.vmware.vcenter.deployment.migrate_client.ActiveDirectorySpec or None) – Information specific to the Active Directory server to which the source windows vCenter Server is joined. This attribute was added in vSphere API 7.0.0.0. If None, existing appliance will not be joined to an Active Directory.

  • auto_answer (bool or None) – Use the default option for any questions that may come up during appliance configuration. This attribute was added in vSphere API 7.0.0.0. If None, will default to false.

class MigrationAssistantSpec(https_port=None, ssl_thumbprint=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Migrate.MigrationAssistantSpec class contains the information needed to connect to the Migration Assistant that is running on the source windows vCenter Server machine. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • https_port (long or None) – The HTTPS port being used by Migration Assistant. This attribute was added in vSphere API 7.0.0.0. If None, port 9123 will be used.

  • ssl_thumbprint (str) – SHA1 thumbprint of the Migration Assistant SSL certificate that will be used for verification. This attribute was added in vSphere API 7.0.0.0.

class PscSpec(ceip_enabled=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Migrate.PscSpec class contains information used to migrate a windows Platform Service Controller to Platform Service Controller appliance. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

ceip_enabled (bool) – Customer experience improvement program should be enabled or disabled for this Platform Services Controller migration. This attribute was added in vSphere API 7.0.0.0.

class SourceVcWindows(hostname=None, username=None, password=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Migrate.SourceVcWindows class contains information about the windows vCenter Server that is going to be migrated. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (str) – The IP address or DNS resolvable name of the source Windows machine. This attribute was added in vSphere API 7.0.0.0.

  • username (str) – The SSO account with administrative privilege to perform the migration operation. This attribute was added in vSphere API 7.0.0.0.

  • password (str) – The SSO administrator account password. This attribute was added in vSphere API 7.0.0.0.

class VcsaEmbeddedSpec(ceip_enabled=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Migrate.VcsaEmbeddedSpec class contains information used to migrate an embedded vCenter Server for Windows to embedded vCenter Server appliance. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

ceip_enabled (bool) – Customer experience improvement program should be enabled or disabled for this embedded vCenter Server migration. This attribute was added in vSphere API 7.0.0.0.

cancel()

Cancel the appliance migration that is in progress. This method was added in vSphere API 7.0.0.0.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in CONFIG_IN_PROGRESS state and if the operation is not INSTALL.

check(spec)

Run sanity checks using the MigrateSpec parameters passed. This method was added in vSphere API 7.0.0.0.

Parameters

spec (Migrate.MigrateSpec) – MigrateSpec parameters to run sanity check on.

Return type

CheckInfo

Returns

CheckInfo containing the check results.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if migration assistant credentials are not valid.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in INITIALIZED state.

get()

Get the MigrateSpec parameters used to configure the ongoing appliance migration. This method was added in vSphere API 7.0.0.0.

Return type

Migrate.MigrateSpec

Returns

MigrateSpec parameters being used to configure appliance migration.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if appliance is not in MIGRATE_PROGRESS state.

start(spec)

Start the appliance migration. This method was added in vSphere API 7.0.0.0.

Parameters

spec (Migrate.MigrateSpec) – MigrateSpec parameters to configure the appliance migration.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if migration assistant credentials are not valid.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in INITIALIZED state.

class com.vmware.vcenter.deployment_client.Notification(id=None, time=None, message=None, resolution=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Notification class contains attributes to describe any info/warning/error messages that Tasks can raise. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – The notification id. This attribute was added in vSphere API 6.7.

  • time (datetime.datetime or None) – The time the notification was raised/found. This attribute was added in vSphere API 6.7. Only set if the time information is available.

  • message (com.vmware.vapi.std_client.LocalizableMessage) – The notification message. This attribute was added in vSphere API 6.7.

  • resolution (com.vmware.vapi.std_client.LocalizableMessage or None) – The resolution message, if any. This attribute was added in vSphere API 6.7. Only set for warnings and errors.

class com.vmware.vcenter.deployment_client.Notifications(info=None, warnings=None, errors=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Notifications class contains info/warning/error messages that can be reported be the task. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • info (list of Notification or None) – Info notification messages reported. This attribute was added in vSphere API 6.7. Only set if an info was reported by the task.

  • warnings (list of Notification or None) – Warning notification messages reported. This attribute was added in vSphere API 6.7. Only set if an warning was reported by the task.

  • errors (list of Notification or None) – Error notification messages reported. This attribute was added in vSphere API 6.7. Only set if an error was reported by the task.

class com.vmware.vcenter.deployment_client.Operation(string)

Bases: vmware.vapi.bindings.enum.Enum

The Operation class defines the supported vCenter appliance deployment operations. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Operation instance.

INSTALL = Operation(string='INSTALL')

The appliance installation is in progress. This class attribute was added in vSphere API 6.7.

MIGRATE = Operation(string='MIGRATE')

The appliance migration is in progress. This class attribute was added in vSphere API 6.7.

RESTORE = Operation(string='RESTORE')

The appliance restoration is in progress. This class attribute was added in vSphere API 6.7.

ROLLBACK = Operation(string='ROLLBACK')

The appliance is being rolled back to an unconfigured state. This class attribute was added in vSphere API 6.7.

UPGRADE = Operation(string='UPGRADE')

The appliance upgrade is in progress. This class attribute was added in vSphere API 6.7.

class com.vmware.vcenter.deployment_client.Question(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Question class provides methods to get the question raised during deployment and to answer them. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class AnswerSpec(question_id=None, answer_val=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Question.AnswerSpec class contains attributes to describe the answer to a raised question. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • question_id (str) – Id of the question being answered. This attribute was added in vSphere API 6.7.

  • answer_val (str) – The answer value. This attribute was added in vSphere API 6.7.

class Info(questions=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Question.Info class contains attributes to describe questions raised during the deployment process. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

questions (list of Question.Question) – One or more questions raised during the deployment. This attribute was added in vSphere API 6.7.

class Question(id=None, question=None, type=None, default_answer=None, possible_answers=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Question.Question class contains attributes to describe a deployment question. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – Id of the question raised. This attribute was added in vSphere API 6.7.

  • question (com.vmware.vapi.std_client.LocalizableMessage) – Message describing the question. This attribute was added in vSphere API 6.7.

  • type (Question.QuestionType) – Type of the question raised. This attribute was added in vSphere API 6.7.

  • default_answer (str) – Default answer value. This attribute was added in vSphere API 6.7.

  • possible_answers (list of str) – Possible answers values. This attribute was added in vSphere API 6.7.

class QuestionType(string)

Bases: vmware.vapi.bindings.enum.Enum

The Question.QuestionType class defines the type of the question raised. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the QuestionType instance.

ABORT_RETRY_IGNORE = QuestionType(string='ABORT_RETRY_IGNORE')

Question with answer values Abort/Retry/Ignore. This class attribute was added in vSphere API 6.7.

OK_CANCEL = QuestionType(string='OK_CANCEL')

Question with answer values Ok/Cancel. This class attribute was added in vSphere API 6.7.

YES_NO = QuestionType(string='YES_NO')

Question with answer values Yes/No. This class attribute was added in vSphere API 6.7.

answer(spec)

Supply answer to the raised question. This method was added in vSphere API 6.7.

Parameters

spec (Question.AnswerSpec) – AnswerSpec with the answer to the raised question.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is NOT in QUESTION_RAISED state.

Raise

com.vmware.vapi.std.errors_client.InternalServerError if answer file could not be created.

get()

Get the question that was raised during the configuration. This method was added in vSphere API 6.7.

Return type

Question.Info

Returns

Info structure containing the question.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in QUESTION_RAISED state.

Raise

com.vmware.vapi.std.errors_client.InternalServerError if questions could not be retrieved although the appliance is in QUESTION_RAISED state.

class com.vmware.vcenter.deployment_client.RemotePscSpec(psc_hostname=None, https_port=None, sso_admin_password=None, ssl_thumbprint=None, ssl_verify=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The RemotePscSpec class contains information used to configure an external vCenter Server that registers with a remote PSC. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • psc_hostname (str) – The IP address or DNS resolvable name of the remote PSC to which this configuring vCenter Server will be registered to. This attribute was added in vSphere API 6.7.

  • https_port (long or None) – The HTTPS port of the external PSC appliance. This attribute was added in vSphere API 6.7. If None, port 443 will be used.

  • sso_admin_password (str) – The SSO administrator account password. This attribute was added in vSphere API 6.7.

  • ssl_thumbprint (str or None) – SHA1 thumbprint of the server SSL certificate will be used for verification when ssl_verify field is set to true. This attribute was added in vSphere API 6.7. This attribute is only relevant if sslVerify is None or has the value true.

  • ssl_verify (bool or None) – SSL verification should be enabled or disabled. If sslVerify is true and and sslThumbprint is None, the CA certificate will be used for verification. If sslVerify is true and sslThumbprint is set then the thumbprint will be used for verification. No verification will be performed if sslVerify value is set to false. This attribute was added in vSphere API 6.7. If None, sslVerify true will be used.

class com.vmware.vcenter.deployment_client.ReplicatedPscSpec(sso_site_name=None, partner_hostname=None, https_port=None, sso_admin_password=None, ssl_thumbprint=None, ssl_verify=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ReplicatedPscSpec class contains information used to check if the configuring PSC can be replicated to the remote PSC. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • sso_site_name (str or None) – The SSO sitename that will be used in PSC replication. This attribute was added in vSphere API 6.7. If None, default-first-site will be used.

  • partner_hostname (str) – The IP address or DNS resolvable name of the partner PSC appliance. This attribute was added in vSphere API 6.7.

  • https_port (long or None) – The HTTPS port of the external PSC appliance. This attribute was added in vSphere API 6.7. If None, port 443 will be used.

  • sso_admin_password (str) – The SSO administrator account password. This attribute was added in vSphere API 6.7.

  • ssl_thumbprint (str or None) – SHA1 thumbprint of the server SSL certificate will be used for verification. This attribute was added in vSphere API 6.7. This attribute is only relevant if sslVerify is None or has the value true.

  • ssl_verify (bool or None) – SSL verification should be enabled or disabled. This attribute was added in vSphere API 6.7. If None, ssl_verify true will be used.

class com.vmware.vcenter.deployment_client.ReplicatedSpec(partner_hostname=None, https_port=None, sso_admin_password=None, ssl_thumbprint=None, ssl_verify=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ReplicatedSpec class contains information used to check if the configuring vCenter Server can be replicated to the remote PSC. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • partner_hostname (str) – The IP address or DNS resolvable name of the partner PSC appliance. This attribute was added in vSphere API 6.7.

  • https_port (long or None) – The HTTPS port of the external PSC appliance. This attribute was added in vSphere API 6.7. If None, port 443 will be used.

  • sso_admin_password (str) – The SSO administrator account password. This attribute was added in vSphere API 6.7.

  • ssl_thumbprint (str or None) – SHA1 thumbprint of the server SSL certificate will be used for verification. This attribute was added in vSphere API 6.7. This attribute is only relevant if sslVerify is None or has the value true.

  • ssl_verify (bool or None) – SSL verification should be enabled or disabled. This attribute was added in vSphere API 6.7. If None, ssl_verify true will be used.

class com.vmware.vcenter.deployment_client.SourceInfo(hostname=None, version=None, deployment_type=None, deployment_size=None, sso_domain_name=None, active_directory_domain=None, dns_servers=None, data_migration_info=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SourceInfo {class contains information about the source vCenter Server system and the database migration options. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (str) – The IP address or DNS resolvable name of the source vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • version (str) – Source vCenter Server version. This attribute was added in vSphere API 7.0.0.0.

  • deployment_type (ApplianceType) – Deployment type of the source vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • deployment_size (ApplianceSize) – Deployment size of the source vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • sso_domain_name (str) – The SSO domain name of the source vCenter Server. This attribute was added in vSphere API 7.0.0.0.

  • active_directory_domain (str) – The domain name of the Active Directory server to which the source vCenter Server is joined. This attribute was added in vSphere API 7.0.0.0.

  • dns_servers (list of str) – IP addresses of the DNS servers of the Active Directory server. This attribute was added in vSphere API 7.0.0.0.

  • data_migration_info (DataMigrationInfo or None) – Contains all the available migrate options, estimated export and import time and the space required to migrate the data. This attribute was added in vSphere API 7.0.0.0. This attribute will be available if estimate data is available for the appliance.

class com.vmware.vcenter.deployment_client.StandalonePscSpec(sso_site_name=None, sso_admin_password=None, sso_domain_name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The StandalonePscSpec class contains information used to configure a standalone PSC appliance. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • sso_site_name (str or None) – The SSO site name used for this PSC. This attribute was added in vSphere API 6.7. If None, default-first-site will be used.

  • sso_admin_password (str) – The SSO administrator account password. This attribute was added in vSphere API 6.7.

  • sso_domain_name (str or None) – The SSO domain name to be used to configure this appliance. This attribute was added in vSphere API 6.7. If None, vsphere.local will be used.

class com.vmware.vcenter.deployment_client.StandaloneSpec(sso_admin_password=None, sso_domain_name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The StandaloneSpec class contains information used to configure a standalone embedded vCenter Server appliance. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • sso_admin_password (str) – The SSO administrator account password. This attribute was added in vSphere API 6.7.

  • sso_domain_name (str or None) – The SSO domain name to be used to configure this appliance. This attribute was added in vSphere API 6.7. If None, vsphere.local will be used.

class com.vmware.vcenter.deployment_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.deployment_client.Upgrade(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Upgrade class provides methods to configure the upgrade of this appliance from an existing vCenter appliance. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class PscSpec(ceip_enabled=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Upgrade.PscSpec class contains information used to upgrade a Platform Service Controller appliance. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

ceip_enabled (bool) – Customer experience improvement program should be enabled or disabled for this Platform Services Controller upgrade. This attribute was added in vSphere API 6.7.

class SourceApplianceSpec(hostname=None, https_port=None, ssl_thumbprint=None, ssl_verify=None, sso_admin_username=None, sso_admin_password=None, root_password=None, ssh_verify=None, ssh_thumbprint=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Upgrade.SourceApplianceSpec class contains information used to connect to the appliance used as the source for an upgrade. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (str) – The IP address or DNS resolvable name of the source appliance. This attribute was added in vSphere API 6.7.

  • https_port (long or None) – The HTTPS port of the source appliance. This attribute was added in vSphere API 6.7. If None, port 443 will be used.

  • ssl_thumbprint (str or None) – SHA1 thumbprint of the server SSL certificate will be used for verification. This attribute was added in vSphere API 6.7. This attribute is only relevant if sslVerify is None or has the value true.

  • ssl_verify (bool or None) – SSL verification should be enabled or disabled for the source appliance validations. By default it is enabled and will use SSL certificate for verification. If thumbprint is provided, will use thumbprint for the verification. This attribute was added in vSphere API 6.7. If None, ssl_verify true will be used.

  • sso_admin_username (str) – The SSO administrator account on the source appliance. This attribute was added in vSphere API 6.7.

  • sso_admin_password (str) – The SSO administrator account password. This attribute was added in vSphere API 6.7.

  • root_password (str) – The password of the root user on the source appliance. This attribute was added in vSphere API 6.7.

  • ssh_verify (bool or None) – Appliance SSH verification should be enabled or disabled. By default it is disabled and will not use any verification. If thumbprint is provided, thumbprint verification will be performed. This attribute was added in vSphere API 6.7. If None, ssh_verify true will be used.

  • ssh_thumbprint (str or None) – MD5 thumbprint of the server SSH key will be used for verification. This attribute was added in vSphere API 6.7. This attribute is only relevant if sshVerify is None or has the value true.

class UpgradeSpec(source_appliance=None, source_location=None, history=None, vcsa_embedded=None, psc=None, auto_answer=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Upgrade.UpgradeSpec class contains information used to configure the appliance upgrade. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • source_appliance (Upgrade.SourceApplianceSpec) – Source appliance spec. This attribute was added in vSphere API 6.7.

  • source_location (LocationSpec) – Source location spec. This attribute was added in vSphere API 6.7.

  • history (HistoryMigrationSpec or None) –

    Determines how vCenter history will be migrated during the upgrade process. vCenter history consists of:

    • Statistics

    • Events

    • Tasks

    By default only core data will be migrated. Use this spec to define which part of vCenter history data will be migrated and when. This attribute was added in vSphere API 6.7. If None, only core database content will be migrated.

  • vcsa_embedded (Upgrade.VcsaEmbeddedSpec or None) – Information that are specific to this embedded vCenter Server. This attribute was added in vSphere API 6.7. If None, ceip_enabled for embedded vcenter server upgrade will default to enabled.

  • psc (Upgrade.PscSpec or None) – Information that are specific to this Platform Services Controller. This attribute was added in vSphere API 6.7. If None, ceip_enabled for psc upgrade will default to enabled.

  • auto_answer (bool or None) – Use the default option for any questions that may come up during appliance configuration. This attribute was added in vSphere API 6.7. If None, will default to false.

class VcsaEmbeddedSpec(ceip_enabled=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Upgrade.VcsaEmbeddedSpec class contains information used to upgrade a Embedded vCenter Server appliance. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

ceip_enabled (bool) – Customer experience improvement program should be enabled or disabled for this embedded vCenter Server upgrade. This attribute was added in vSphere API 6.7.

cancel()

Cancel the appliance upgrade that is in progress. This method was added in vSphere API 6.7.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in CONFIG_IN_PROGRESS state and if the operation is not INSTALL.

check(spec)

Run sanity checks using the UpgradeSpec parameters passed. This method was added in vSphere API 6.7.

Parameters

spec (Upgrade.UpgradeSpec) – UpgradeSpec parameters to run sanity check on.

Return type

CheckInfo

Returns

CheckInfo containing the check results.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if source credentials are not valid.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if source container credentials are not valid.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in INITIALIZED state.

get()

Get the UpgradeSpec parameters used to configure the ongoing appliance upgrade. This method was added in vSphere API 6.7.

Return type

Upgrade.UpgradeSpec

Returns

UpgradeSpec parameters being used to configure appliance upgrade.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if appliance is not in UPGRADE_PROGRESS state.

start(spec)

Start the appliance installation. This method was added in vSphere API 6.7.

Parameters

spec (Upgrade.UpgradeSpec) – UpgradeSpec parameters to configure the appliance upgrade.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if source credentials are not valid.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if source container credentials are not valid.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in INITIALIZED state.

class com.vmware.vcenter.deployment_client.VerificationMode(string)

Bases: vmware.vapi.bindings.enum.Enum

The VerificationMode class defines the verification modes for SSL certificates or SSH connections. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the VerificationMode instance.

NONE = VerificationMode(string='NONE')

No verification will be performed. This class attribute was added in vSphere API 6.7.

THUMBPRINT = VerificationMode(string='THUMBPRINT')

Passed thumbprint will be used for verification. This class attribute was added in vSphere API 6.7.

com.vmware.vcenter.guest_client module

The com.vmware.vcenter.guest_client module provides classes for managing guest customization specifications in the vCenter Server.

class com.vmware.vcenter.guest_client.AdapterMapping(mac_address=None, adapter=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The AdapterMapping class specifies the association between a virtual network adapter and its IP settings. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • mac_address (str or None) –

    The MAC address of a network adapter being customized.

    In vSphere 7.0 series, the MAC addresses must be specified in the ascending order of pciSlotNumber, otherwise a MAC address mismatch error will be reported. For further details, see the https://kb.vmware.com/s/article/87648

    . This attribute was added in vSphere API 7.0.0.0. If None, the customization process maps the the settings from the list of AdapterMappings.IPSettings in the CustomizationSpec.interfaces to the virtual machine’s network adapters, in PCI slot order. The first virtual network adapter on the PCI bus is assigned interfaces[0].IPSettings, the second adapter is assigned interfaces[1].IPSettings, and so on.

  • adapter (IPSettings) – The IP settings for the associated virtual network adapter. This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.CloudConfiguration(type=None, cloudinit=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

Guest customization settings to customize a guest operating system with cloud configuration.

The CloudConfiguration class contains the type of cloud configuration and the settings of that cloud configuration.. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The CloudConfiguration.Type class specifies different types of the cloud configuration. This enumeration was added in vSphere API 7.0.3.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

CLOUDINIT = Type(string='CLOUDINIT')

cloud-init configuration. This class attribute was added in vSphere API 7.0.3.0.

class com.vmware.vcenter.guest_client.CloudinitConfiguration(metadata=None, userdata=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

Guest customization settings to customize a Linux guest operating system with raw cloud-init data.

The CloudinitConfiguration class contains settings that configure a Linux machine with raw cloud-init data. See https://cloudinit.readthedocs.io/en/latest about cloud-init.. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class com.vmware.vcenter.guest_client.ConfigurationSpec(windows_config=None, linux_config=None, cloud_config=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ConfigurationSpec class specifies the settings for customizing a guest operating system. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • windows_config (WindowsConfiguration or None) – Guest customization specification for a Windows guest operating system. This attribute was added in vSphere API 7.0.0.0. If None, ConfigurationSpec.linux_config or ConfigurationSpec.cloud_config must be set. Otherwise, an appropriate fault will be thrown.

  • linux_config (LinuxConfiguration or None) – Guest customization specification for a linux guest operating system. This attribute was added in vSphere API 7.0.0.0. If None, ConfigurationSpec.windows_config or ConfigurationSpec.cloud_config must be set. Otherwise, an appropriate fault will be thrown.

  • cloud_config (CloudConfiguration or None) – Guest customization specification with cloud configuration. This attribute was added in vSphere API 7.0.3.0. If None, ConfigurationSpec.windows_config or ConfigurationSpec.linux_config must be set. Otherwise, an appropriate fault will be thrown.

class com.vmware.vcenter.guest_client.CustomizationSpec(configuration_spec=None, global_dns_settings=None, interfaces=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CustomizationSpec class contains information required to customize a virtual machine when deploying it or migrating it to a new host. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • configuration_spec (ConfigurationSpec) – Settings to be applied to the guest during the customization. This attribute was added in vSphere API 7.0.0.0.

  • global_dns_settings (GlobalDNSSettings) – Global DNS settings constitute the DNS settings that are not specific to a particular virtual network adapter. This attribute was added in vSphere API 7.0.0.0.

  • interfaces (list of AdapterMapping) – IP settings that are specific to a particular virtual network adapter. The AdapterMapping class maps a network adapter’s MAC address to its IPSettings. May be empty if there are no network adapters, else should match number of network adapters configured for the VM. This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.CustomizationSpecs(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The CustomizationSpecs class provides methods to manage guest customization specifications in the vCenter Server. This class was added in vSphere API 6.7.1.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(spec=None, description=None, name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CustomizationSpecs.CreateSpec class contains specification information and specification object that can be passed to the CustomizationSpecs.create() method. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • spec (CustomizationSpec) – The specification object. This attribute was added in vSphere API 7.0.0.0.

  • description (str) – Description of the specification. This attribute was added in vSphere API 7.0.0.0.

  • name (str) – Name of the specification. This attribute was added in vSphere API 7.0.0.0.

class FilterSpec(names=None, os_type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CustomizationSpecs.FilterSpec class contains attributes used to filter the results when listing guest customization specifications (see CustomizationSpecs.list()). If multiple attributes are specified, only guest customization specifications matching all of the attributes match the filter. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • names (set of str or None) – Names that guest customization specifications must have to match the filter (see CustomizationSpecs.Summary.name). This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.guest.CustomizationSpec. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.guest.CustomizationSpec. If None or empty, guest customization specifications with any name match the filter.

  • os_type (CustomizationSpecs.OsType or None) – Guest operating system type that guest customization specifications must have to match the filter (see CustomizationSpecs.Summary.os_type). This attribute was added in vSphere API 6.7.1. If None, guest customization specifications with any guest operating system type match the filter.

class Format(string)

Bases: vmware.vapi.bindings.enum.Enum

The CustomizationSpecs.Format class specifies the formats the customization specification can be exported to. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Format instance.

JSON = Format(string='JSON')

JSON format. This class attribute was added in vSphere API 7.0.0.0.

XML = Format(string='XML')

XML format. This class attribute was added in vSphere API 7.0.0.0.

class Info(last_modified=None, spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CustomizationSpecs.Info class describes a guest customization specification and the timestamp when it was last modified. This is returned by the CustomizationSpecs.get() method. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • last_modified (datetime.datetime) – Time when the specification was last modified. This attribute was added in vSphere API 7.0.0.0.

  • spec (CustomizationSpecs.Spec) – The Spec object including specification and metadata information. This attribute was added in vSphere API 7.0.0.0.

class Metadata(description=None, name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CustomizationSpecs.Metadata class contains metadata i.e. name and description related to a customization specification. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • description (str) – Description of the specification. This attribute was added in vSphere API 7.0.0.0.

  • name (str) – Name of the specification. This attribute was added in vSphere API 7.0.0.0.

class OsType(string)

Bases: vmware.vapi.bindings.enum.Enum

The CustomizationSpecs.OsType class defines the types of guest operating systems for which guest customization is supported. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the OsType instance.

LINUX = OsType(string='LINUX')

A customization specification for a Linux guest operating system. This class attribute was added in vSphere API 6.7.1.

WINDOWS = OsType(string='WINDOWS')

A customization specification for a Windows guest operating system. This class attribute was added in vSphere API 6.7.1.

RESOURCE_TYPE = 'com.vmware.vcenter.guest.CustomizationSpec'

The resource type for a vCenter guest customization specification. This class attribute was added in vSphere API 6.7.1.

class Spec(fingerprint=None, spec=None, description=None, name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CustomizationSpecs.Spec class contains the specification information and specification object. This is passed to the CustomizationSpecs.set() method. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • fingerprint (str) – The fingerprint is a unique identifier for a given version of the configuration. Each change to the configuration will update this value. A client cannot change this value. If specified when updating a specification, the changes will only be applied if the current fingerprint matches the specified fingerprint. This field can be used to guard against updates that has happened between the specification content was read and until it is applied. This attribute was added in vSphere API 7.0.0.0.

  • spec (CustomizationSpec) – The specification object. This attribute was added in vSphere API 7.0.0.0.

  • description (str) – Description of the specification. This attribute was added in vSphere API 7.0.0.0.

  • name (str) – Name of the specification. This attribute was added in vSphere API 7.0.0.0.

class Summary(name=None, description=None, os_type=None, last_modified=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CustomizationSpecs.Summary class contains commonly used information about a guest customization specification. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – Name of the guest customization specification. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.guest.CustomizationSpec. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.guest.CustomizationSpec.

  • description (str) – Description of the guest customization specification. This attribute was added in vSphere API 6.7.1.

  • os_type (CustomizationSpecs.OsType) – Guest operating system type for which that this guest customization specification applies. This attribute was added in vSphere API 6.7.1.

  • last_modified (datetime.datetime) – Date and tme when this guest customization specification was last modified. This attribute was added in vSphere API 6.7.1.

create(spec)

Creates a customization specification. This method was added in vSphere API 7.0.0.0.

Parameters

spec (CustomizationSpecs.CreateSpec) – The information i.e. name, description and the settings i.e hostname, ip address etc for the new customization specification that needs to be created.

Return type

str

Returns

The name of the customization specification that is created. The return value will be an identifier for the resource type: com.vmware.vcenter.guest.CustomizationSpec.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a customization specification is already present with the same name.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the specified specification is not a valid one.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VirtualMachine.Provisioning.ModifyCustSpecs.

delete(name)

Deletes a customization specification with the specified identifier. This method was added in vSphere API 7.0.0.0.

Parameters

name (str) – The name of the customization specification that needs to be deleted. The parameter must be an identifier for the resource type: com.vmware.vcenter.guest.CustomizationSpec.

Raise

com.vmware.vapi.std.errors_client.NotFound if a customization specification is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VirtualMachine.Provisioning.ModifyCustSpecs.

export(name, format)

Returns the content of the customization specification in the specified format. Note that any passwords in the customization specification will be set to blank values during the export method. This method was added in vSphere API 7.0.0.0.

Parameters
  • name (str) – The name of the customization specification that has to be returned. The parameter must be an identifier for the resource type: com.vmware.vcenter.guest.CustomizationSpec.

  • format (CustomizationSpecs.Format) – The format in which the customization specification has to be returned.

Return type

str

Returns

The string representation of the customization specification in the specified format.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If value of format is not valid.

Raise

com.vmware.vapi.std.errors_client.NotFound if the customization specification is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VirtualMachine.Provisioning.ReadCustSpecs.

get(name)

Returns the guest customization specification from vCenter with the specified identifier. This method was added in vSphere API 7.0.0.0.

Parameters

name (str) – The name of the customization specification. The parameter must be an identifier for the resource type: com.vmware.vcenter.guest.CustomizationSpec.

Return type

CustomizationSpecs.Info

Returns

A customization spec with the specified identifier.

Raise

com.vmware.vapi.std.errors_client.NotFound if a customization specification is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VirtualMachine.Provisioning.ReadCustSpecs.

import_specification(customization_spec)

Converts a well formatted string to a CustomizationSpecs.CreateSpec. The resulting object can be passed to CustomizationSpecs.create() method. This method was added in vSphere API 7.0.0.0.

Parameters

customization_spec (str) – content to be converted to the spec.

Return type

CustomizationSpecs.CreateSpec

Returns

A proper specification of type CustomizationSpecs.CreateSpec

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the specified content cannot be properly converted into a proper valid CustomizationSpecs.CreateSpec object.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VirtualMachine.Provisioning.ModifyCustSpecs.

list(filter=None)

Returns information about at most 1000 visible (subject to permission checks) guest customization specifications in vCenter matching the CustomizationSpecs.FilterSpec. This method was added in vSphere API 6.7.1.

Parameters

filter (CustomizationSpecs.FilterSpec or None) – Specification of matching guest customization specifications for which information should be returned. If None, the behavior is equivalent to a CustomizationSpecs.FilterSpec with all attributes None which means all guest customization specifications match the filter.

Return type

list of CustomizationSpecs.Summary

Returns

Commonly used information about the guest customization specifications matching the CustomizationSpecs.FilterSpec.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the CustomizationSpecs.FilterSpec.os_type attribute contains a value that is not supported by the server.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if more than 1000 guest customization specifications match the CustomizationSpecs.FilterSpec.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VirtualMachine.Provisioning.ReadCustSpecs.

set(name, spec)

Sets an existing specification, possibly after retrieving (by using CustomizationSpecs.get()) and editing it. This method was added in vSphere API 7.0.0.0.

Parameters
  • name (str) – The name of the customization specification that needs to be set. The parameter must be an identifier for the resource type: com.vmware.vcenter.guest.CustomizationSpec.

  • spec (CustomizationSpecs.Spec) – The new specification that will overwrite the existing specification.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If, based on the item’s fingerprint value, the set process detects that the specification has changed since its retrieval, then the method throws InvalidArgument exception to warn the client that he might overwrite another client’s change.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If the settings in spec are not valid.

Raise

com.vmware.vapi.std.errors_client.NotFound if a customization specification is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VirtualMachine.Provisioning.ModifyCustSpecs.

class com.vmware.vcenter.guest_client.Domain(type=None, workgroup=None, domain=None, domain_username=None, domain_password=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Domain class specifies the information needed to join a workgroup or domain. This structure maps to the Identification key in the sysprep.xml answer file. These values are transferred into the sysprep.xml file that VirtualCenter stores on the target virtual disk. For more information about performing unattended installation, check https://technet.microsoft.com/en-us/library/cc771830(v=ws.10).aspx. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (Domain.Type) – The type of network to join after the customization. This attribute was added in vSphere API 7.0.0.0.

  • workgroup (str) – The workgroup that the virtual machine should join. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is Domain.Type.WORKGROUP.

  • domain (str) – The domain to which the virtual machine should be joined. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is Domain.Type.DOMAIN.

  • domain_username (str) – The domain user that has permission to join the domain after virtual machine is joined. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is Domain.Type.DOMAIN.

  • domain_password (str) – The domain user password that has permission to join the Domain.domain_username after customization. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is Domain.Type.DOMAIN.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The Domain.Type class defines the types of network the virtual machine should join to after the customization is completed. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

DOMAIN = Type(string='DOMAIN')

The virtual machine should be be joined to a domain. This class attribute was added in vSphere API 7.0.0.0.

WORKGROUP = Type(string='WORKGROUP')

The virtual machine should be be joined to a workgroup. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.GlobalDNSSettings(dns_suffix_list=None, dns_servers=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The GlobalDNSSettings class specifies a collection of global IP settings in the guest operating system. In Linux, DNS server settings are global. The settings can either be statically set or supplied by a DHCP server. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • dns_suffix_list (list of str or None) – List of name resolution suffixes for the virtual network adapter. This list applies to both Windows and Linux guest customization. For Linux, this setting is global, whereas in Windows, this setting is listed on a per-adapter basis. This attribute was added in vSphere API 7.0.0.0. If None, no DNS suffixes are set.

  • dns_servers (list of str or None) – List of DNS servers, for a virtual network adapter with a static IP address. If this list is empty, then the guest operating system is expected to use a DHCP server to get its DNS server settings. These settings configure the virtual machine to use the specified DNS servers. These DNS server settings are listed in the order of preference. This attribute was added in vSphere API 7.0.0.0. If None, no DNS servers are set.

class com.vmware.vcenter.guest_client.GuiUnattended(auto_logon=None, auto_logon_count=None, password=None, time_zone=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The GuiUnattended class maps to the GuiUnattended key in the sysprep.xml answer file. These values are plugged directly into the sysprep.xml file that VirtualCenter stores on the target virtual disk. For more detailed information about performing unattended installations, check https://technet.microsoft.com/en-us/library/cc771830(v=ws.10).aspx. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • auto_logon (bool) – Flag to determine whether or not the machine automatically logs on as Administrator. See the GuiUnattended.password property. If GuiUnattended.auto_logon flag is set, then GuiUnattended.password must not be None or the guest customization will fail. This attribute was added in vSphere API 7.0.0.0.

  • auto_logon_count (long) – If the GuiUnattended.auto_logon flag is set, then this property specifies the number of times the machine should automatically log on as Administrator. Generally it should be 1, but if the setup requires a number of reboots, you may want to increase it. This number may be determined by the list of commands. This attribute was added in vSphere API 7.0.0.0.

  • password (str or None) – The new administrator password for the machine. To specify that the password should be set to blank (that is, no password), leave it unset. This attribute was added in vSphere API 7.0.0.0. If None, blank password will be used.

  • time_zone (long) – The time zone index for the virtual machine. Numbers correspond to time zones at https://support.microsoft.com/en-us/help/973627/microsoft-time-zone-index-values. This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.HostnameGenerator(type=None, fixed_name=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The HostnameGenerator class specifies various mechanisms of generating the hostname for the guest inside the virtual machine while customization. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (HostnameGenerator.Type) – The type of the Name Generator. This attribute was added in vSphere API 7.0.0.0.

  • fixed_name (str) – The virtual machine name specified by the client. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is HostnameGenerator.Type.FIXED.

  • prefix (str) – Base prefix, to which a unique number is appended. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is HostnameGenerator.Type.PREFIX.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The HostnameGenerator.Type class specifies different types of Name Generators. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

FIXED = Type(string='FIXED')

Specifies that a fixed name should be used for the hostname for the virtual machine during the customization. This class attribute was added in vSphere API 7.0.0.0.

PREFIX = Type(string='PREFIX')

Specifies that a unique name should be generated by concatenating the base string with a number including the network name of the guest.

Virtual machine names are unique across the set of hosts and virtual machines known to the VirtualCenter instance. VirtualCenter tracks the network names of virtual machines as well as hosts. VMware Tools runs in a guest operating system and reports information to VirtualCenter.. This class attribute was added in vSphere API 7.0.0.0.

USER_INPUT_REQUIRED = Type(string='USER_INPUT_REQUIRED')

Indicates that the host name is not specified in advance. The user must provide a valid value when the actual customization spec is applied to a virtual machine. This class attribute was added in vSphere API 7.0.0.0.

VIRTUAL_MACHINE = Type(string='VIRTUAL_MACHINE')

Specifies that the VirtualCenter should generate a virtual machine name.

The name is generated from a base prefix comprising the virtual machine entity name. A number is appended, if necessary, to make it unique.

Virtual machine names are unique across the set of hosts and virtual machines known to the VirtualCenter instance. VirtualCenter tracks the network names of the virtual machines as well as hosts. VMware Tools runs in a guest operating system and reports information to VirtualCenter, including the network name of the guest.. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.IPSettings(ipv4=None, ipv6=None, windows=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The IPSettings class specifies the IP settings for a virtual network adapter. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • ipv4 (Ipv4 or None) – Specification to configure IPv4 address, subnet mask and gateway info for this virtual network adapter. This attribute was added in vSphere API 7.0.0.0. If None, no IPv4 addresses are set.

  • ipv6 (Ipv6 or None) – Specification to configure IPv6 address, subnet mask and gateway info for this virtual network adapter. This attribute was added in vSphere API 7.0.0.0. If None, no IPv6 addresses are set.

  • windows (WindowsNetworkAdapterSettings or None) – Windows settings to be configured for this specific virtual Network adapter. This is valid only for Windows guest operating systems. This attribute was added in vSphere API 7.0.0.0. If None, no specific Windows settings are set.

class com.vmware.vcenter.guest_client.Ipv4(type=None, ip_address=None, prefix=None, gateways=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Ipv4 class specifies the IPv4 settings that need to be applied to a virtual network adapter. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (Ipv4.Type) – The type of the IPv4 configuration. This attribute was added in vSphere API 7.0.0.0.

  • ip_address (str) – The static IPv4 address. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is Ipv4.Type.STATIC.

  • prefix (long) – The IPv4 CIDR prefix, for example, 24. See http://www.oav.net/mirrors/cidr.html for netmask-to-prefix conversion. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is Ipv4.Type.STATIC.

  • gateways (list of str or None) – Gateways for the IPv4 address. This attribute was added in vSphere API 7.0.0.0. If None, no gateways are set.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The Ipv4.Type class specifies different types of the IPv4 configuration. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

DHCP = Type(string='DHCP')

DHCP configuration. This class attribute was added in vSphere API 7.0.0.0.

STATIC = Type(string='STATIC')

Static configuration. This class attribute was added in vSphere API 7.0.0.0.

USER_INPUT_REQUIRED = Type(string='USER_INPUT_REQUIRED')

Indicates that the IPv4 settings are not specified in advance. The user must provide a valid value when the actual customization spec is applied to a virtual machine. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.Ipv6(type=None, ipv6=None, gateways=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Ipv6 class specifies the IPv6 settings that need to be applied to a virtual network adapter. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (Ipv6.Type) – The IPv6 configuration type. This attribute was added in vSphere API 7.0.0.0.

  • ipv6 (list of Ipv6Address) – IPv6 address. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of type is Ipv6.Type.STATIC.

  • gateways (list of str or None) – gateways for the IPv6 address. This attribute was added in vSphere API 7.0.0.0. If None, no gateways are set.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The Ipv6.Type class specifies different types of the IPv6 configuration. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

DHCP = Type(string='DHCP')

DHCP IPv6 configuration. This class attribute was added in vSphere API 7.0.0.0.

STATIC = Type(string='STATIC')

Static IPv6 configuration. This class attribute was added in vSphere API 7.0.0.0.

USER_INPUT_REQUIRED = Type(string='USER_INPUT_REQUIRED')

Indicates that the IPv6 settings are not specified in advance. The user must provide a valid value when the actual customization spec is applied to a virtual machine. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.Ipv6Address(ip_address=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Ipv6Address class specifies the the settings for a Static IPv6 configuration. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • ip_address (str) – Static IPv6 Address. This attribute was added in vSphere API 7.0.0.0.

  • prefix (long) – The CIDR prefix for the interface. This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.LinuxConfiguration(hostname=None, domain=None, time_zone=None, script_text=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

Guest customization Settings to customize a Linux guest operating system.

The LinuxConfiguration class contains settings that identify a Linux machine in the same way that the WindowsConfiguration class identifies a Windows machine.. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (HostnameGenerator) – The network host name of the Linux virtual machine. This attribute was added in vSphere API 7.0.0.0.

  • domain (str) – The fully qualified domain name. This attribute was added in vSphere API 7.0.0.0.

  • time_zone (str or None) –

    The case-sensitive time zone, such as Europe/Sofia. Valid time zone values are based on the tz (time zone) database used by Linux. The values are strings (str) in the form “Area/Location,” in which Area is a continent or ocean name, and Location is the city, island, or other regional designation.

    See the https://kb.vmware.com/kb/2145518 for a list of supported time zones for different versions in Linux.. This attribute was added in vSphere API 7.0.0.0. If None, time zone is not modified inside guest operating system.

  • script_text (str or None) –

    The script to run before and after Linux guest customization. The max size of the script is 65536 bytes. As long as the script (shell, perl, python…) has the right “#!” in the header, it is supported. The caller should not assume any environment variables when the script is run.

    The script is invoked by the customization engine using the command line: 1) with argument “precustomization” before customization, 2) with argument “postcustomization” after customization. The script should parse this argument and implement pre-customization or post-customization task code details in the corresponding block.

    A Linux shell script example:

    #!/bin/sh if [ x$1 == x"precustomization" ]; then echo "Do Precustomization tasks" #code for pre-customization actions... elif [ x$1 == x"postcustomization" ]; then echo "Do Postcustomization tasks" #code for post-customization actions... fi. This attribute was added in vSphere API 7.0.0.0.

    If None, no script will be executed.

class com.vmware.vcenter.guest_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.guest_client.UserData(computer_name=None, full_name=None, organization=None, product_key=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The UserData class specifies the personal data pertaining to the user of the Windows guest operating system. This class maps to the UserData key in the sysprep.xml answer file. These values are transferred directly into the sysprep.xml file that VirtualCenter stores on the target virtual disk. For more detailed information about performing unattended installation, check https://technet.microsoft.com/en-us/library/cc771830(v=ws.10).aspx. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • computer_name (HostnameGenerator) – The computer name of the (Windows) virtual machine. A computer name may contain letters (A-Z), numbers(0-9) and hyphens (-) but no spaces or periods (.). The name may not consist entirely of digits. A computer name is restricted to 15 characters in length. If the computer name is longer than 15 characters, it will be truncated to 15 characters. Check HostnameGenerator for various options. This attribute was added in vSphere API 7.0.0.0.

  • full_name (str) – Full name of the end user. Note that this is not the username but full name specified in “Firstname Lastname” format. This attribute was added in vSphere API 7.0.0.0.

  • organization (str) – Name of the organization that owns the computer. This attribute was added in vSphere API 7.0.0.0.

  • product_key (str) – The product Key to use for activating Windows guest operating system. This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.WindowsConfiguration(reboot=None, sysprep=None, sysprep_xml=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The WindowsConfiguration class specifies the settings for customizing a windows guest operating system. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • reboot (WindowsConfiguration.RebootOption or None) – A value specifying the action that should be taken after customization. This attribute was added in vSphere API 7.0.0.0. If None, the WindowsConfiguration.RebootOption.REBOOT option will be chosen.

  • sysprep (WindowsSysprep or None) – Customization settings like user details, administrator details, etc for the windows guest operating system. Exactly one of sysprep or sysprepXml must be specified. This attribute was added in vSphere API 7.0.0.0. If None, sysprep settings will not be applied to the windows guest operating system.

  • sysprep_xml (str or None) – All settings specified in a XML format. This is the content of a typical answer.xml file that is used by System administrators during the Windows image customization. Check https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/update-windows-settings-and-scripts-create-your-own-answer-file-sxs Exactly one of sysprep or sysprepXml must be specified. This attribute was added in vSphere API 7.0.0.0. If None, sysprep settings will not be applied to the windows guest operating system.

class RebootOption(string)

Bases: vmware.vapi.bindings.enum.Enum

The WindowsConfiguration.RebootOption class specifies what should be done to the guest after the customization. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the RebootOption instance.

NO_REBOOT = RebootOption(string='NO_REBOOT')

Take no action. Leave the guest OS running after customization. This option can be used to look at values for debugging purposes. This class attribute was added in vSphere API 7.0.0.0.

REBOOT = RebootOption(string='REBOOT')

Reboot the guest after customization. This class attribute was added in vSphere API 7.0.0.0.

SHUTDOWN = RebootOption(string='SHUTDOWN')

Shutdown the guest after customization. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.WindowsNetworkAdapterSettings(dns_servers=None, dns_domain=None, wins_servers=None, net_bios_mode=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The WindowsNetworkAdapterSettings class specifies Windows specific Network settings for a virtual network adapter. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • dns_servers (list of str or None) –

    A list of server IP addresses to use for DNS lookup in a Windows guest operating system.

    These servers should be specified in the order of preference. If this list is not empty, and if a DHCP IP address is used, then these settings override the DHCP settings.. This attribute was added in vSphere API 7.0.0.0. If None, no DNS servers are set.

  • dns_domain (str or None) – A DNS domain suffix such as vmware.com. This attribute was added in vSphere API 7.0.0.0. If None, no DNS domain is set.

  • wins_servers (list of str or None) – List of WINS Servers to set for the Windows guest operating system. A Maximum of two IP addresses can be specified in this list. The first IP address will be set as the primary WINS server. The second IP address will be set as the secondary WINS server. This attribute was added in vSphere API 7.0.0.0. If None, no WINS Servers are set.

  • net_bios_mode (WindowsNetworkAdapterSettings.NetBIOSMode or None) – NetBIOS setting for Windows. This attribute was added in vSphere API 7.0.0.0. If None, existing NetBIOS mode will be retained.

class NetBIOSMode(string)

Bases: vmware.vapi.bindings.enum.Enum

The WindowsNetworkAdapterSettings.NetBIOSMode class specifies different NetBIOS settings for Windows guest operating systems. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the NetBIOSMode instance.

DISABLE = NetBIOSMode(string='DISABLE')

Never use NetBIOS. This class attribute was added in vSphere API 7.0.0.0.

ENABLE = NetBIOSMode(string='ENABLE')

Always use NetBIOS. This class attribute was added in vSphere API 7.0.0.0.

USE_DHCP = NetBIOSMode(string='USE_DHCP')

DHCP server decides whether or not to use NetBIOS. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.guest_client.WindowsSysprep(gui_run_once_commands=None, user_data=None, domain=None, gui_unattended=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The WindowsSysprep class provides all the settings like user details, administrator details, etc that need to applied for a windows guest operating system during customization. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • gui_run_once_commands (list of str or None) – A list of commands to run at first user logon, after customizing the guest. These commands are directly mapped to the GuiRunOnce key in the sysprep.xml answer file. These commands are transferred into the sysprep.xml file that VirtualCenter stores on the target virtual disk. For more information about performing unattended installation, check https://technet.microsoft.com/en-us/library/cc771830(v=ws.10).aspx The commands listed here ar executed when a user logs on the first time after customization completes. The logon may be driven by GuiUnattended.auto_logon setting. These commands are directly mapped to the GuiRunOnce key in the. This attribute was added in vSphere API 7.0.0.0. If None, no commands are run.

  • user_data (UserData) – Personal data pertaining to the owner of the virtual machine. This attribute was added in vSphere API 7.0.0.0.

  • domain (Domain or None) – Information needed to join a workgroup or domain. This attribute was added in vSphere API 7.0.0.0. If None, the guest will not be joined to any workgroup or a domain.

  • gui_unattended (GuiUnattended) – Information related to unattended installation. This attribute was added in vSphere API 7.0.0.0.

com.vmware.vcenter.hvc_client module

The com.vmware.vcenter.hvc_client module provides classes to manage hybrid links between a local and remote Platform Service Controller. Usage beyond VMware Cloud on AWS is not supported.

Bases: vmware.vapi.bindings.stub.VapiInterface

The Links class provides methods to create, delete, get information, and list hybrid links between the local and foreign Platform Service Controller (PSC). Usage beyond VMware Cloud on AWS is not supported. Warning: This class is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CertificateInfo(ssl_thumbprint=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Links.CertificateInfo class contains information about the SSL certificate for a destination PSC endpoint. Warning: This class is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

ssl_thumbprint (str) – The SHA-256 thumbprint of the SSL certificate for the destination PSC endpoint. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

class CreateSpec(psc_hostname=None, port=None, domain_name=None, username=None, password=None, ssl_thumbprint=None, admin_groups=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Links.CreateSpec class is the specification used for the hybrid link creation. Warning: This class is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • psc_hostname (str) – The PSC hostname for the domain to be linked. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

  • port (str or None) – The HTTPS port of the PSC to be linked. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments. If None 443 will be used as default.

  • domain_name (str) – The domain to which the PSC belongs. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

  • username (str) – The administrator username of the PSC. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

  • password (str) – The administrator password of the PSC. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

  • ssl_thumbprint (str or None) – The ssl thumbprint of the server. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments. if None no thumbprint is passed.

  • admin_groups (set of str or None) – List of groups to be added to enable administrator access to. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments. if None administrator access will not be set.

class Credentials(user_name=None, password=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Links.Credentials class specifies user credentials to make a successful connection to remote endpoint. Warning: This class is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • user_name (str) – Name of the user to authenticate. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

  • password (str) – Password for the user. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

class Summary(link=None, display_name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Links.Summary class contains information about the hybrid link. Warning: This class is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • link (str) – Unique identifier for the link. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.hvc.Links. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.hvc.Links.

  • display_name (str) – The display name is set to the domain name which was set during create. Warning: This attribute is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

create(spec)

Creates a new hybrid link between the local and foreign PSC. Usage beyond VMware Cloud on AWS is not supported. Warning: This method is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Parameters

spec (Links.CreateSpec) – Specification for the new link to be created.

Return type

str

Returns

The identifier of the newly linked domain. The return value will be an identifier for the resource type: com.vmware.vcenter.hvc.Links.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists If the link already exists.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If the values of any of the attributes of the spec parameter are not valid.

Raise

com.vmware.vapi.std.errors_client.Unsupported If the PSC or the VC version is not supported.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user is not authorized.

Raise

com.vmware.vapi.std.errors_client.UnverifiedPeer If the SSL certificate of the foreign PSC cannot be validated by comparing with the thumbprint provided in Links.CreateSpec.ssl_thumbprint or if Links.CreateSpec.ssl_thumbprint is None. The value of the {\@link UnverifiedPeer#data) attribute will be a class that contains all the attributes defined in Links.CertificateInfo.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

delete(link)

Deletes an existing hybrid link. Usage beyond VMware Cloud on AWS is not supported. Warning: This method is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Parameters

link (str) – Identifier of the hybrid link. The parameter must be an identifier for the resource type: com.vmware.vcenter.hvc.Links.

Raise

com.vmware.vapi.std.errors_client.NotFound If the hybrid link associated with link does not exist.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user is not authorized.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

list()

Enumerates the list of registered hybrid links. Usage beyond VMware Cloud on AWS is not supported. Warning: This method is available as Technology Preview. These are early access APIs provided to test, automate and provide feedback on the feature. Since this can change based on feedback, VMware does not guarantee backwards compatibility and recommends against using them in production environments. Some Technology Preview APIs might only be applicable to specific environments.

Return type

list of Links.Summary

Returns

The list of hybrid link information.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

class com.vmware.vcenter.hvc_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.identity_client module

The com.vmware.vcenter.identity_client module provides classes to manage VcIdentity.

class com.vmware.vcenter.identity_client.Providers(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Providers interface provides methods to list, read and modify vCenter Server identity providers. This class was added in vSphere API 7.0.0.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class ActiveDirectoryOverLdap(user_name=None, password=None, users_base_dn=None, groups_base_dn=None, server_endpoints=None, cert_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.ActiveDirectoryOverLdap class contains the information about to how to use an Active Directory over LDAP connection to allow searching for users and groups if the identity provider is an On-Prem service. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • user_name (str) – User name to connect to the active directory server. This attribute was added in vSphere API 7.0.0.0.

  • password (str) – Password to connect to the active directory server. This attribute was added in vSphere API 7.0.0.0.

  • users_base_dn (str) – Base distinguished name for users. This attribute was added in vSphere API 7.0.0.0.

  • groups_base_dn (str) – Base distinguished name for groups. This attribute was added in vSphere API 7.0.0.0.

  • server_endpoints (list of str) – Active directory server endpoints. At least one active directory server endpoint must be set. This attribute was added in vSphere API 7.0.0.0.

  • cert_chain (com.vmware.vcenter.certificate_management_client.X509CertChain or None) – SSL certificate chain in base64 encoding. This attribute was added in vSphere API 7.0.0.0. This attribute can be None only, if all the active directory server endpoints use the LDAP (not LDAPS) protocol.

class ConfigType(string)

Bases: vmware.vapi.bindings.enum.Enum

The Providers.ConfigType class contains the possible types of vCenter Server identity providers. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ConfigType instance.

Oauth2 = ConfigType(string='Oauth2')

Config for OAuth2. This class attribute was added in vSphere API 7.0.0.0.

Oidc = ConfigType(string='Oidc')

Config for OIDC. This class attribute was added in vSphere API 7.0.0.0.

class CreateSpec(config_tag=None, oauth2=None, oidc=None, org_ids=None, is_default=None, name=None, domain_names=None, auth_query_params=None, idm_protocol=None, idm_endpoints=None, active_directory_over_ldap=None, upn_claim=None, groups_claim=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.CreateSpec class contains the information used to create an identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • config_tag (Providers.ConfigType) – The config type of the identity provider. This attribute was added in vSphere API 7.0.0.0.

  • oauth2 (Providers.Oauth2CreateSpec) – OAuth2 CreateSpec. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oauth2.

  • oidc (Providers.OidcCreateSpec) – OIDC CreateSpec. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oidc.

  • org_ids (set of str or None) – The set of orgIds as part of SDDC creation which provides the basis for tenancy. This attribute was added in vSphere API 7.0.0.0. If None, the set will be empty.

  • is_default (bool or None) – Specifies whether the provider is the default provider. Setting isDefault of current provider to True makes all other providers non-default. If no other providers created in this vCenter Server before, this parameter will be disregarded, and the provider will always be set to the default. This attribute was added in vSphere API 7.0.0.0. If None the provider will be the default provider if it is the first provider that is created, and will not be the default provider otherwise.

  • name (str or None) – The user friendly name for the provider. This name can be used for human-readable identification purposes, but it does not have to be unique, as the system will use internal UUIDs to differentiate providers. This attribute was added in vSphere API 7.0.0.0. If None, the name will be the empty string

  • domain_names (set of str or None) – Set of fully qualified domain names to trust when federating with this identity provider. Tokens from this identity provider will only be validated if the user belongs to one of these domains, and any domain-qualified groups in the tokens will be filtered to include only those groups that belong to one of these domains. This attribute was added in vSphere API 7.0.0.0. If None, domainNames will be the empty set and the domain validation behavior at login with this identity provider will be as follows: the user’s domain will be parsed from the User Principal Name (UPN) value that is found in the tokens returned by the identity provider. This domain will then be implicitly trusted and used to filter any groups that are also provided in the tokens.

  • auth_query_params ((dict of str and list of str) or None) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0. If None, the map will be empty.

  • idm_protocol (Providers.IdmProtocol or None) – Communication protocol to the identity management endpoints. This attribute was added in vSphere API 7.0.0.0. If None, no communication protocol will be configured for the identity provider.

  • idm_endpoints (list of str) – Identity management endpoints. When specified, at least one endpoint must be provided. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of idmProtocol is one of Providers.IdmProtocol.REST, Providers.IdmProtocol.SCIM, or Providers.IdmProtocol.SCIM2_0.

  • active_directory_over_ldap (Providers.ActiveDirectoryOverLdap) – Identity management configuration. If the protocol is LDAP, the configuration must be set, else InvalidArgument is thrown. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of idmProtocol is Providers.IdmProtocol.LDAP.

  • upn_claim (str or None) – Specifies which claim provides the user principal name (UPN) for the user. This attribute was added in vSphere API 7.0.0.0. If None, the claim named ‘acct’ will be used to provide backwards compatibility with CSP.

  • groups_claim (str or None) – Specifies which claim provides the group membership for the token subject. These groups will be used for mapping to local groups per the claim map. This attribute was added in vSphere API 7.0.0.0. If None, the default behavior will be CSP backwards compatiblility. The groups for the subject will be comprised of the groups in ‘group_names’ and ‘group_ids’ claims.

class IdmProtocol(string)

Bases: vmware.vapi.bindings.enum.Enum

The Providers.IdmProtocol class contains the possible types of communication protocols to the identity management endpoints. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the IdmProtocol instance.

LDAP = IdmProtocol(string='LDAP')

LDAP protocol based identity management endpoints. This class attribute was added in vSphere API 7.0.0.0.

REST = IdmProtocol(string='REST')

REST protocol based identity management endpoints. This class attribute was added in vSphere API 7.0.0.0.

SCIM = IdmProtocol(string='SCIM')

SCIM V1.1 protocol based identity management endpoints. This class attribute was added in vSphere API 7.0.0.0.

SCIM2_0 = IdmProtocol(string='SCIM2_0')

SCIM V2.0 protocol based identity management endpoints. This class attribute was added in vSphere API 7.0.0.0.

class Info(name=None, org_ids=None, config_tag=None, oauth2=None, oidc=None, is_default=None, domain_names=None, auth_query_params=None, idm_protocol=None, idm_endpoints=None, active_directory_over_ldap=None, upn_claim=None, groups_claim=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.Info class contains the information about an identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – The user friendly name for the provider. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • org_ids (set of str) – The set of orgIds as part of SDDC creation which provides the basis for tenancy. This attribute was added in vSphere API 7.0.0.0.

  • config_tag (Providers.ConfigType) – The config type of the identity provider. This attribute was added in vSphere API 7.0.0.0.

  • oauth2 (Providers.Oauth2Info) – OAuth2 Info. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oauth2.

  • oidc (Providers.OidcInfo) – OIDC Info. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oidc.

  • is_default (bool) – Specifies whether the provider is the default provider. This attribute was added in vSphere API 7.0.0.0.

  • domain_names (set of str) – Set of fully qualified domain names to trust when federating with this identity provider. Tokens from this identity provider will only be validated if the user belongs to one of these domains, and any domain-qualified groups in the tokens will be filtered to include only those groups that belong to one of these domains. If domainNames is an empty set, domain validation behavior at login with this identity provider will be as follows: the user’s domain will be parsed from the User Principal Name (UPN) value that is found in the tokens returned by the identity provider. This domain will then be implicitly trusted and used to filter any groups that are also provided in the tokens. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • auth_query_params (dict of str and list of str) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • idm_protocol (Providers.IdmProtocol or None) – Communication protocol to the identity management endpoints. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • idm_endpoints (list of str) – Identity management endpoints. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of idmProtocol is one of Providers.IdmProtocol.REST, Providers.IdmProtocol.SCIM, or Providers.IdmProtocol.SCIM2_0.

  • active_directory_over_ldap (Providers.ActiveDirectoryOverLdap) – Identity management configuration. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of idmProtocol is Providers.IdmProtocol.LDAP.

  • upn_claim (str) – Specifies which claim provides the user principal name (UPN) for the user. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • groups_claim (str) – Specifies which claim provides the group membership for the token subject. If empty, the default behavior for CSP is used. In this case, the groups for the subject will be comprised of the groups in ‘group_names’ and ‘group_ids’ claims. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

class Oauth2AuthenticationMethod(string)

Bases: vmware.vapi.bindings.enum.Enum

The Providers.Oauth2AuthenticationMethod class contains the possible types of OAuth2 authentication methods. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Oauth2AuthenticationMethod instance.

CLIENT_SECRET_BASIC = Oauth2AuthenticationMethod(string='CLIENT_SECRET_BASIC')

Clients that have received a client_secret value from the Authorization Server, authenticate with the Authorization Server in accordance with Section 3.2.1 of OAuth 2.0 [RFC6749] using the HTTP Basic authentication scheme. This class attribute was added in vSphere API 7.0.0.0.

CLIENT_SECRET_JWT = Oauth2AuthenticationMethod(string='CLIENT_SECRET_JWT')

Clients that have received a client_secret value from the Authorization Server, create a JWT using an HMAC SHA algorithm, such as HMAC SHA-256. The HMAC (Hash-based Message Authentication Code) is calculated using the octets of the UTF-8 representation of the client_secret as the shared key. This class attribute was added in vSphere API 7.0.0.0.

CLIENT_SECRET_POST = Oauth2AuthenticationMethod(string='CLIENT_SECRET_POST')

Clients that have received a client_secret value from the Authorization Server, authenticate with the Authorization Server in accordance with Section 3.2.1 of OAuth 2.0 [RFC6749] by including the Client Credentials in the request body. This class attribute was added in vSphere API 7.0.0.0.

PRIVATE_KEY_JWT = Oauth2AuthenticationMethod(string='PRIVATE_KEY_JWT')

Clients that have registered a public key sign a JWT using that key. The client authenticates in accordance with JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants [OAuth.JWT] and Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants [OAuth.Assertions]. This class attribute was added in vSphere API 7.0.0.0.

class Oauth2CreateSpec(auth_endpoint=None, token_endpoint=None, public_key_uri=None, client_id=None, client_secret=None, claim_map=None, issuer=None, authentication_method=None, auth_query_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.Oauth2CreateSpec class contains the information used to create an OAuth2 identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • auth_endpoint (str) – Authentication/authorization endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • token_endpoint (str) – Token endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • public_key_uri (str) – Endpoint to retrieve the provider public key for validation. This attribute was added in vSphere API 7.0.0.0.

  • client_id (str) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0.

  • client_secret (str) – The secret shared between the client and the provider. This attribute was added in vSphere API 7.0.0.0.

  • claim_map (dict of str and (dict of str and list of str)) – The map used to transform an OAuth2 claim to a corresponding claim that vCenter Server understands. Currently only the key “perms” is supported. The key “perms” is used for mapping the “perms” claim of incoming JWT. The value is another map with an external group as the key and a vCenter Server group as value. This attribute was added in vSphere API 7.0.0.0.

  • issuer (str) – The identity provider namespace. It is used to validate the issuer in the acquired OAuth2 token. This attribute was added in vSphere API 7.0.0.0.

  • authentication_method (Providers.Oauth2AuthenticationMethod) – Authentication method used by the provider. This attribute was added in vSphere API 7.0.0.0.

  • auth_query_params ((dict of str and list of str) or None) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0. If None, the map will be empty.

class Oauth2Info(auth_endpoint=None, token_endpoint=None, public_key_uri=None, client_id=None, client_secret=None, claim_map=None, issuer=None, authentication_method=None, auth_query_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.Oauth2Info class contains the information about an OAuth2 identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • auth_endpoint (str) – Authentication/authorization endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • token_endpoint (str) – Token endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • public_key_uri (str) – Endpoint to retrieve the provider public key for validation. This attribute was added in vSphere API 7.0.0.0.

  • client_id (str) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0.

  • client_secret (str) – The secret shared between the client and the provider. This attribute was added in vSphere API 7.0.0.0.

  • claim_map (dict of str and (dict of str and list of str)) – The map used to transform an OAuth2 claim to a corresponding claim that vCenter Server understands. Currently only the key “perms” is supported. The key “perms” is used for mapping the “perms” claim of incoming JWT. The value is another map with an external group as the key and a vCenter Server group as value. This attribute was added in vSphere API 7.0.0.0.

  • issuer (str) – The identity provider namespace. It is used to validate the issuer in the acquired OAuth2 token. This attribute was added in vSphere API 7.0.0.0.

  • authentication_method (Providers.Oauth2AuthenticationMethod) – Authentication method used by the provider. This attribute was added in vSphere API 7.0.0.0.

  • auth_query_params (dict of str and list of str) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0.

class Oauth2Summary(auth_endpoint=None, token_endpoint=None, client_id=None, authentication_header=None, auth_query_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.Oauth2Summary class contains commonly used information about an OAuth2 identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • auth_endpoint (str) – Authentication/authorization endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • token_endpoint (str) – Token endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • client_id (str) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0.

  • authentication_header (str) – The authentication data used as part of request header to acquire or refresh an OAuth2 token. The data format depends on the authentication method used. Example of basic authentication format: Authorization: Basic [base64Encode(clientId + “:” + secret)]. This attribute was added in vSphere API 7.0.0.0.

  • auth_query_params (dict of str and list of str) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0.

class Oauth2UpdateSpec(auth_endpoint=None, token_endpoint=None, public_key_uri=None, client_id=None, client_secret=None, claim_map=None, issuer=None, authentication_method=None, auth_query_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.Oauth2UpdateSpec class contains the information used to update the OAuth2 identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • auth_endpoint (str or None) – Authentication/authorization endpoint of the provider. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • token_endpoint (str or None) – Token endpoint of the provider. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • public_key_uri (str or None) – Endpoint to retrieve the provider public key for validation. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • client_id (str or None) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • client_secret (str or None) – Shared secret between identity provider and client. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • claim_map ((dict of str and (dict of str and list of str)) or None) – The map used to transform an OAuth2 claim to a corresponding claim that vCenter Server understands. Currently only the key “perms” is supported. The key “perms” is used for mapping the “perms” claim of incoming JWT. The value is another map with an external group as the key and a vCenter Server group as value. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • issuer (str or None) – The identity provider namespace. It is used to validate the issuer in the acquired OAuth2 token. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • authentication_method (Providers.Oauth2AuthenticationMethod or None) – Authentication method used by the provider. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • auth_query_params ((dict of str and list of str) or None) – key/value pairs that are to be appended to the authEndpoint request. How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details: If the value contains only one string, then the key is added with “k=v”. If the value is an empty list, then the key is added without a “=v”. If the value contains multiple strings, then the key is repeated in the query-string for each string in the value. If the map is empty, deletes all params. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

class OidcCreateSpec(discovery_endpoint=None, client_id=None, client_secret=None, claim_map=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.OidcCreateSpec class contains the information used to create an OIDC identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • discovery_endpoint (str) – Endpoint to retrieve the provider metadata. This attribute was added in vSphere API 7.0.0.0.

  • client_id (str) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0.

  • client_secret (str) – The secret shared between the client and the provider. This attribute was added in vSphere API 7.0.0.0.

  • claim_map (dict of str and (dict of str and list of str)) – The map used to transform an OAuth2 claim to a corresponding claim that vCenter Server understands. Currently only the key “perms” is supported. The key “perms” is used for mapping the “perms” claim of incoming JWT. The value is another map with an external group as the key and a vCenter Server group as value. This attribute was added in vSphere API 7.0.0.0.

class OidcInfo(discovery_endpoint=None, logout_endpoint=None, auth_endpoint=None, token_endpoint=None, public_key_uri=None, client_id=None, client_secret=None, claim_map=None, issuer=None, authentication_method=None, auth_query_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.OidcInfo class contains information about an OIDC identity provider. OIDC is a discovery protocol for OAuth2 configuration metadata, so Providers.OidcInfo contains additional discovered OAuth2 metadata. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • discovery_endpoint (str) – Endpoint to retrieve the provider metadata. This attribute was added in vSphere API 7.0.0.0.

  • logout_endpoint (str) – The endpoint to use for terminating the user’s session at the identity provider. This value is automatically derived from the metadata information provided by the OIDC discovery endpoint. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • auth_endpoint (str) – Authentication/authorization endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • token_endpoint (str) – Token endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • public_key_uri (str) – Endpoint to retrieve the provider public key for validation. This attribute was added in vSphere API 7.0.0.0.

  • client_id (str) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0.

  • client_secret (str) – The secret shared between the client and the provider. This attribute was added in vSphere API 7.0.0.0.

  • claim_map (dict of str and (dict of str and list of str)) – The map used to transform an OAuth2 claim to a corresponding claim that vCenter Server understands. Currently only the key “perms” is supported. The key “perms” is used for mapping the “perms” claim of incoming JWT. The value is another map with an external group as the key and a vCenter Server group as value. This attribute was added in vSphere API 7.0.0.0.

  • issuer (str) – The identity provider namespace. It is used to validate the issuer in the acquired OAuth2 token. This attribute was added in vSphere API 7.0.0.0.

  • authentication_method (Providers.Oauth2AuthenticationMethod) – Authentication method used by the provider. This attribute was added in vSphere API 7.0.0.0.

  • auth_query_params (dict of str and list of str) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0.

class OidcSummary(discovery_endpoint=None, logout_endpoint=None, auth_endpoint=None, token_endpoint=None, client_id=None, authentication_header=None, auth_query_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.OidcSummary class contains commonly used information about an OIDC identity provider. OIDC is a discovery protocol for OAuth2 configuration metadata, so Providers.OidcSummary contains discovered OAuth2 metadata. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • discovery_endpoint (str) – Endpoint to retrieve the provider metadata. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • logout_endpoint (str) – The endpoint to use for terminating the user’s session at the identity provider. This value is automatically derived from the metadata information provided by the OIDC discovery endpoint. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • auth_endpoint (str) – Authentication/authorization endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • token_endpoint (str) – Token endpoint of the provider. This attribute was added in vSphere API 7.0.0.0.

  • client_id (str) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0.

  • authentication_header (str) – The authentication data used as part of request header to acquire or refresh an OAuth2 token. The data format depends on the authentication method used. Example of basic authentication format: Authorization: Basic [base64Encode(clientId + “:” + secret)]. This attribute was added in vSphere API 7.0.0.0.

  • auth_query_params (dict of str and list of str) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0.

class OidcUpdateSpec(discovery_endpoint=None, client_id=None, client_secret=None, claim_map=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.OidcUpdateSpec class contains the information used to update the OIDC identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • discovery_endpoint (str or None) – Endpoint to retrieve the provider metadata. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • client_id (str or None) – Client identifier to connect to the provider. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • client_secret (str or None) – The secret shared between the client and the provider. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • claim_map ((dict of str and (dict of str and list of str)) or None) – The map used to transform an OAuth2 claim to a corresponding claim that vCenter Server understands. Currently only the key “perms” is supported. The key “perms” is used for mapping the “perms” claim of incoming JWT. The value is another map with an external group as the key and a vCenter Server group as value. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

class Summary(provider=None, name=None, config_tag=None, oauth2=None, oidc=None, is_default=None, domain_names=None, auth_query_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.Summary class contains commonly used information about an identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • provider (str) – The identifier of the provider. This attribute was added in vSphere API 7.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.identity.Providers. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.identity.Providers.

  • name (str) – The user friendly name for the provider. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • config_tag (Providers.ConfigType) – The config type of the identity provider. This attribute was added in vSphere API 7.0.0.0.

  • oauth2 (Providers.Oauth2Summary) – OAuth2 Summary. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oauth2.

  • oidc (Providers.OidcSummary) – OIDC Summary. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oidc.

  • is_default (bool) – Specifies whether the provider is the default provider. This attribute was added in vSphere API 7.0.0.0.

  • domain_names (set of str) – Set of fully qualified domain names to trust when federating with this identity provider. Tokens from this identity provider will only be validated if the user belongs to one of these domains, and any domain-qualified groups in the tokens will be filtered to include only those groups that belong to one of these domains. If domainNames is an empty set, domain validation behavior at login with this identity provider will be as follows: the user’s domain will be parsed from the User Principal Name (UPN) value that is found in the tokens returned by the identity provider. This domain will then be implicitly trusted and used to filter any groups that are also provided in the tokens. This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

  • auth_query_params (dict of str and list of str) –

    key/value pairs that are to be appended to the authEndpoint request.

    How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details:

    • If the value contains only one string, then the key is added with “k=v”.

    • If the value is an empty list, then the key is added without a “=v”.

    • If the value contains multiple strings, then the key is repeated in the query-string for each string in the value.

    . This attribute was added in vSphere API 7.0.0.0. This attribute is optional because it was added in a newer version than its parent node.

class UpdateSpec(config_tag=None, oauth2=None, oidc=None, org_ids=None, make_default=None, name=None, domain_names=None, auth_query_params=None, idm_protocol=None, idm_endpoints=None, active_directory_over_ldap=None, upn_claim=None, reset_upn_claim=None, groups_claim=None, reset_groups_claim=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Providers.UpdateSpec class contains the information used to update the identity provider. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • config_tag (Providers.ConfigType) – The config type of the identity provider. This attribute was added in vSphere API 7.0.0.0.

  • oauth2 (Providers.Oauth2UpdateSpec) – OAuth2 UpdateSpec. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oauth2.

  • oidc (Providers.OidcUpdateSpec) – OIDC UpdateSpec. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of configTag is Providers.ConfigType.Oidc.

  • org_ids (set of str or None) – The set orgIds as part of SDDC creation which provides the basis for tenancy. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • make_default (bool or None) – Specifies whether to make this the default provider. If makeDefault is set to true, this provider will be flagged as the default provider and any other providers that had previously been flagged as the default will be made non-default. If makeDefault is set to false, this provider’s default flag will not be modified. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • name (str or None) – The user friendly name for the provider. This name can be used for human-readable identification purposes, but it does not have to be unique, as the system will use internal UUIDs to differentiate providers. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • domain_names (set of str or None) – Set of fully qualified domain names to trust when federating with this identity provider. Tokens from this identity provider will only be validated if the user belongs to one of these domains, and any domain-qualified groups in the tokens will be filtered to include only those groups that belong to one of these domains. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged. If domainNames is an empty set, domain validation behavior at login with this identity provider will be as follows: the user’s domain will be parsed from the User Principal Name (UPN) value that is found in the tokens returned by the identity provider. This domain will then be implicitly trusted and used to filter any groups that are also provided in the tokens.

  • auth_query_params ((dict of str and list of str) or None) – key/value pairs that are to be appended to the authEndpoint request. How to append to authEndpoint request: If the map is not empty, a “?” is added to the endpoint URL, and combination of each k and each string in the v is added with an “&” delimiter. Details: If the value contains only one string, then the key is added with “k=v”. If the value is an empty list, then the key is added without a “=v”. If the value contains multiple strings, then the key is repeated in the query-string for each string in the value. If the map is empty, deletes all params. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • idm_protocol (Providers.IdmProtocol or None) – The protocol to communicate to the identity management endpoints. This attribute was added in vSphere API 7.0.0.0. If None, leave value unchanged.

  • idm_endpoints (list of str) – Identity management endpoints. When specified, at least one endpoint must be provided. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of idmProtocol is one of Providers.IdmProtocol.REST, Providers.IdmProtocol.SCIM, or Providers.IdmProtocol.SCIM2_0.

  • active_directory_over_ldap (Providers.ActiveDirectoryOverLdap) – Identity management configuration. If the protocol is LDAP, the configuration must be set, else InvalidArgument is thrown. This attribute was added in vSphere API 7.0.0.0. This attribute is optional and it is only relevant when the value of idmProtocol is Providers.IdmProtocol.LDAP.

  • upn_claim (str or None) – Specifies which claim provides the user principal name (UPN) for the subject of the token. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • reset_upn_claim (bool or None) – Flag indicating whether the user principal name (UPN) claim should be set back to its default value. If this field is set to true, the user principal name (UPN) claim will be set to ‘acct’, which is used for backwards compatibility with CSP. If this field is set to false, the existing user principal name (UPN) claim will be changed to the value specified in Providers.UpdateSpec.upn_claim, if any. This attribute was added in vSphere API 7.0.0.0. If None, the existing user principal name (UPN) claim will be changed to the value specified in Providers.UpdateSpec.upn_claim, if any.

  • groups_claim (str or None) – Specifies which claim provides the group membership for the token subject. This attribute was added in vSphere API 7.0.0.0. If None, leaves value unchanged.

  • reset_groups_claim (bool or None) – Flag indicating whether any existing groups claim value should be removed. If this field is set to true, the existing groups claim value is removed which defaults to backwards compatibility with CSP. In this case, the groups for the subject will be comprised of the groups in ‘group_names’ and ‘group_ids’ claims. If this field is set to false, the existing groups claim will be changed to the value specified in Providers.UpdateSpec.groups_claim, if any. This attribute was added in vSphere API 7.0.0.0. If None, the existing groups claim will be changed to the value specified in Providers.UpdateSpec.groups_claim, if any.

create(spec)

Create a vCenter Server identity provider. This method was added in vSphere API 7.0.0.0.

Parameters

spec (Providers.CreateSpec) – the CreateSpec contains the information used to create the provider

Return type

str

Returns

The identifier of the created identity provider. The return value will be an identifier for the resource type: com.vmware.vcenter.identity.Providers.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if authorization is not given to caller.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if invalid arguments are provided in createSpec.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if provider exists for provider ID in given spec.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VcIdentityProviders.Create and VcIdentityProviders.Manage.

delete(provider)

Delete a vCenter Server identity provider. This method was added in vSphere API 7.0.0.0.

Parameters

provider (str) – the identifier of the provider to delete The parameter must be an identifier for the resource type: com.vmware.vcenter.identity.Providers.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if authorization is not given to caller.

Raise

com.vmware.vapi.std.errors_client.NotFound if no provider found with the given provider identifier.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VcIdentityProviders.Manage.

get(provider)

Retrieve detailed information of the specified identity provider. This method was added in vSphere API 7.0.0.0.

Parameters

provider (str) – the identifier of the provider The parameter must be an identifier for the resource type: com.vmware.vcenter.identity.Providers.

Return type

Providers.Info

Returns

Detailed information of the specified identity provider.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if authorization is not given to caller.

Raise

com.vmware.vapi.std.errors_client.NotFound if no provider found with the given provider identifier.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VcIdentityProviders.Read and VcIdentityProviders.Manage.

list()

Retrieve all identity providers. This method was added in vSphere API 7.0.0.0.

Return type

list of Providers.Summary

Returns

Commonly used information about the identity providers.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if authorization is not given to caller.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VcIdentityProviders.Read and VcIdentityProviders.Manage.

update(provider, spec)

Update a vCenter Server identity provider. This method was added in vSphere API 7.0.0.0.

Parameters
  • provider (str) – the identifier of the provider to update The parameter must be an identifier for the resource type: com.vmware.vcenter.identity.Providers.

  • spec (Providers.UpdateSpec) – the UpdateSpec contains the information used to update the provider

Raise

com.vmware.vapi.std.errors_client.Unauthorized if authorization is not given to caller.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if invalid arguments are provided in updateSpec.

Raise

com.vmware.vapi.std.errors_client.NotFound if no provider found with the given provider identifier.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires VcIdentityProviders.Manage.

class com.vmware.vcenter.identity_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.inventory_client module

The com.vmware.vcenter.inventory_client component provides methods and classes for retrieving vCenter datastore and network information for a given list of identifiers.

class com.vmware.vcenter.inventory_client.Datastore(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Datastore class provides methods to retrieve information about datastores.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Datastore.Info class contains information about a datastore.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

type (str) – Type of the datastore. When clients pass a value of this class as a parameter, the attribute must be one of Datastore or StoragePod. When methods return a value of this class as a return value, the attribute will be one of Datastore or StoragePod.

find(datastores)

Returns datastore information for the specified datastores. The key in the return value dict is the datastore identifier and the value in the dict is the datastore information.

Parameters

datastores (list of str) – Identifiers of the datastores for which information will be returned. The parameter must contain identifiers for the resource type: Datastore.

Return type

dict of str and (Datastore.Info or None)

Returns

Datastore information for the specified datastores. The key in the return value dict is the datastore identifier and the value in the dict is the datastore information. The key in the return value dict will be an identifier for the resource type: Datastore.

Raise

com.vmware.vapi.std.errors_client.NotFound if no datastore can be found for one or more of the datastore identifiers in datastores

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource Datastore referenced by the parameter datastores requires System.Read.

class com.vmware.vcenter.inventory_client.Network(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Network class provides methods to retrieve information about vCenter Server networks.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Network.Info class contains information about a vCenter Server network.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

type (str) – Type of the vCenter Server network. When clients pass a value of this class as a parameter, the attribute must be one of Network, DistributedVirtualPortgroup, or OpaqueNetwork. When methods return a value of this class as a return value, the attribute will be one of Network, DistributedVirtualPortgroup, or OpaqueNetwork.

find(networks)

Returns network information for the specified vCenter Server networks. The key in the return value dict is the network identifier and the value in the dict is the network information.

Parameters

networks (list of str) – Identifiers of the vCenter Server networks for which information will be returned. The parameter must contain identifiers for the resource type: Network.

Return type

dict of str and (Network.Info or None)

Returns

Network information for the specified vCenter Server networks. The key in the return value dict is the network identifier and the value in the dict is the network information. The key in the return value dict will be an identifier for the resource type: Network.

Raise

com.vmware.vapi.std.errors_client.NotFound if no datastore can be found for one or more of the vCenter Server network identifiers in networks

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource Network referenced by the parameter networks requires System.Read.

class com.vmware.vcenter.inventory_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.iso_client module

The com.vmware.vcenter.iso_client module provides classes and classes that will let its client mount or unmount an ISO image on a virtual machine as a CD-ROM.

class com.vmware.vcenter.iso_client.Image(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

Provides an interface to mount and unmount an ISO image on a virtual machine.

This is an API that will let its client mount or unmount an ISO image on a virtual machine as a CD-ROM.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

mount(library_item, vm)

Mounts an ISO image from a content library on a virtual machine.

Parameters
  • library_item (str) – The identifier of the library item having the ISO image to mount on the virtual machine. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

  • vm (str) – The identifier of the virtual machine where the specified ISO image will be mounted. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

str

Returns

The identifier of the newly created virtual CD-ROM backed by the specified ISO image. The return value will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Cdrom.

Raise

com.vmware.vapi.std.errors_client.NotFound If either vm or the library_item is not found.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If no .iso file is present on the library item.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState When the operation is not allowed on the virtual machine in its current state.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.Config.AddRemoveDevice.

  • The resource com.vmware.content.library.Item referenced by the parameter library_item requires ContentLibrary.DownloadSession.

unmount(vm, cdrom)

Unmounts a previously mounted CD-ROM using an ISO image as a backing.

Parameters
  • vm (str) – The identifier of the virtual machine from which to unmount the virtual CD-ROM. The parameter must be an identifier for the resource type: VirtualMachine.

  • cdrom (str) – The device identifier of the CD-ROM. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Cdrom.

Raise

com.vmware.vapi.std.errors_client.NotFound If the virtual machine identified by vm is not found or the cdrom does not identify a virtual CD-ROM in the virtual machine.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState When the operation is not allowed on the virtual machine in its current state.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.Config.AddRemoveDevice.

  • The resource com.vmware.vcenter.vm.hardware.Cdrom referenced by the parameter cdrom requires System.Read.

class com.vmware.vcenter.iso_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.lcm_client module

The com.vmware.vcenter.lcm_client module provides classes for managing the vCenter Server lifecycle. Copyright 2021 VMware, Inc. All rights reserved. – VMware Confidential

class com.vmware.vcenter.lcm_client.Notification(id=None, time=None, message=None, resolution=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Notification class describes a notification that can be reported by the appliance task, which can be of type info, warning or errors.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class com.vmware.vcenter.lcm_client.Notifications(info=None, warnings=None, errors=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Notifications class contains info/warning/error messages that can be reported be the appliance task.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • info (list of Notification or None) – Info notification messages reported. Only set if an info was reported by the appliance task.

  • warnings (list of Notification or None) – Warning notification messages reported. Only set if an warning was reported by the appliance task.

  • errors (list of Notification or None) – Error notification messages reported. Only set if an error was reported by the appliance task.

class com.vmware.vcenter.lcm_client.Reports(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Report class provides an method to download the report generated by the interop and precheck operations. To download a report, you must use the get method. A Report.Location class represents the location of the file which has Report.Token class which represents the token ID (\@name String) and the expiration time of the token Report.Token.expiry DateTime. Report.Location class also has the URI for the file which needs to be downloaded.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Location(uri=None, download_file_token=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Reports.Location class contains the URI location to download the report from, as well as a token required (as a header on the HTTP request) to get the bundle. The validity of the token is 5 minutes as best attempt. After the token expires, any attempt to call the URI with said token will fail.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • uri (str) – Report Download URI.

  • download_file_token (Reports.Token) – Information about the token required in the HTTP GET request to retrieve the report

class Token(token=None, expiry=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Reports.Token class contains information about the token required in the HTTP GET request to generate the report.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • token (str) – A one-time, short-lived token required in the HTTP header of the request to the url. This token needs to be passed in as a header with the name “session-id”.

  • expiry (datetime.datetime) – Expiry time of the token

get(report)

Returns the location Reports.Location information for downloading the report for the specified file name.

Retrieving a report involves two steps:

  • Step 1: Invoke the Reports.get() method to provision a token and a URI.

  • Step 2: Make an HTTP GET request by using the URI and the token returned in step 1 to retrieve the report.

The HTTP GET request will:

  • Return 401 (Not Authorized) if the download URI is recognized, but the token is invalid, 404 if the URL is not recognized otherwise return 200 (OK)

  • Provide the CSV contents as the output of the request. The API accepts the file name as input, reads the contents of that CSV file, and returns this text as the result of the API.

Parameters

report (str) – The parameter must be an identifier for the resource type: com.vmware.vcenter.lcm.report.

Return type

Reports.Location

Returns

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.NotFound If there is no file associated with report in the system.

Raise

com.vmware.vapi.std.errors_client.Error If there is some unknown internal error. The accompanying error message will give more details about the failure.

class com.vmware.vcenter.lcm_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.namespace_management_client module

The com.vmware.vcenter.namespace_management_client module provides classes for managing Namespaces.

class com.vmware.vcenter.namespace_management_client.CNSFileConfig(vsan_clusters=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CNSFileConfig class contains the specification required to set the configuration for Cloud Native Storage file volume support on Supervisor.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

vsan_clusters (list of str) –

CNSFileConfig.vsan_clusters is a list of clusters to be used for provisioning file volumes.

As a prerequisite these clusters must have vSAN and vSAN file services enabled, and must be in the same vCenter as the Supervisor.

Currently this list must have a single entry which is the cluster identifier of the current cluster. This cluster must be a vSAN cluster and must have vSAN File Service enabled.

If a cluster in the list is not a vSAN cluster or does not have vSAN File Service enabled, an InvalidArgument error will be thrown from Clusters.enable(), Clusters.update() and Clusters.set() APIs.

An empty list may be specified to disable file volume support on the Supervisor. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: ClusterComputeResource.

class com.vmware.vcenter.namespace_management_client.ClusterAvailableVersions(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The {\@name cluster-available-versions} class provides methods to retrieve available upgrade versions of WCP and detailed information about each upgrade.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Summary(version=None, name=None, description=None, release_date=None, release_notes=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterAvailableVersions.Summary class contains the information about each available upgrade version.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • version (str) – Version of the upgrade.

  • name (str) – Name of the upgrade.

  • description (str) – Description of the upgrade.

  • release_date (datetime.datetime) – Release date of the upgrade.

  • release_notes (str) – Release details of the upgrade.

list()

Get information about each available upgrade.

Return type

list of ClusterAvailableVersions.Summary

Returns

Information for each upgrade.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management_client.ClusterCompatibility(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The ClusterCompatibility class provides methods to get Namespace-related compatibility information for clusters in this vCenter.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class FilterSpec(compatible=None, network_provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterCompatibility.FilterSpec class contains attributes used to filter the results when listing clusters (see ClusterCompatibility.list()) and their compatibility information.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • compatible (bool or None) – Set this flag to true to only list vSphere clusters that are currently compatible with the Namespaces feature. If set to false, both compatible and incompatible vSphere clusters will be listed. If None, both compatible and incompatible vSphere clusters will be listed.

  • network_provider (Clusters.NetworkProvider or None) – The network provider whose networks will be considered. This attribute was added in vSphere API 7.0.1.0. If None, this will default to Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN.

class FilterSpecV2(compatible=None, network_provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterCompatibility.FilterSpecV2 class contains attributes used to filter the results when listing clusters (see ClusterCompatibility.list_v2()) and their compatibility information. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class Summary(cluster=None, compatible=None, incompatibility_reasons=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterCompatibility.Summary class contains the information about the compatibility of a vSphere cluster.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier of the vSphere cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • compatible (bool) – Compatibility of this vSphere cluster. If false, the list of incompatibility issues will be given in the incompatibilityReasons field.

  • incompatibility_reasons (list of com.vmware.vapi.std_client.LocalizableMessage) – Reasons for incompatibility.

class ZoneCompatibilityInfo(compatible=None, zone_summaries=None, incompatibility_reasons=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterCompatibility.ZoneCompatibilityInfo class contains the information about the compatibility between a list of vSphere Zones. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • compatible (bool) – Flag to indicate whether the vSphere Zones are compatible with each other. If false, the list of incompatibility issues will be given in the incompatibilityReasons field. This attribute was added in vSphere API 8.0.0.1.

  • zone_summaries (list of ClusterCompatibility.ZoneSummary) – Information about the compatibility of a list of vSphere Zones and the vSphere clusters associated with them. This attribute was added in vSphere API 8.0.0.1.

  • incompatibility_reasons (list of com.vmware.vapi.std_client.LocalizableMessage) – Reasons for incompatibility between the vSphere Zones. This attribute was added in vSphere API 8.0.0.1.

class ZoneFilterSpec(zones=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterCompatibility.ZoneFilterSpec class contains attributes used to filter the results when listing vSphere Zones (see ClusterCompatibility.list_v2()) and their compatibility information. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

zones (list of str or None) – A list of vSphere Zone identifiers which will be used to filter vSphere Zones that correspond to this specific set of identifiers. This attribute was added in vSphere API 8.0.0.1. If None or empty, results will not be filtered for specific vSphere Zone identifiers.

class ZoneSummary(zone=None, compatible=None, cluster_summaries=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterCompatibility.ZoneSummary class contains the information about the compatibility of a vSphere Zone and the vSphere clusters associated with it. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • zone (str) – Identifier of this vSphere Zone. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.consumption_domains.Zone. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.consumption_domains.Zone.

  • compatible (bool) – Flag to indicate whether the current Zone can be used to enable a Supervisor cluster. If false, the list of incompatibility issues will be given in the clusterSummaries field. This attribute was added in vSphere API 8.0.0.1.

  • cluster_summaries (list of ClusterCompatibility.Summary) – A list of information about the compatibility of vSphere clusters associated with this vSphere Zone. This attribute was added in vSphere API 8.0.0.1.

list(filter=None)

Returns Namespaces compatibility information for all vSphere clusters in the vCenter Server matching the ClusterCompatibility.FilterSpec. The result contains only visible (subject to permission checks) clusters.

Parameters

filter (ClusterCompatibility.FilterSpec or None) – Specification of matching clusters for which information should be returned. If None, the behavior is equivalent to a ClusterCompatibility.FilterSpec with all attributes None which means all NSX-T clusters the user is authorized to view will be returned.

Return type

list of ClusterCompatibility.Summary

Returns

Namespaces compatibility information for the clusters matching the the ClusterCompatibility.FilterSpec.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if filter contains any error.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege on the vSphere clusters.

list_v2(zone_filter=None, cluster_filter=None)

Returns Namespaces compatibility information for all vSphere clusters that match the and are associated with the vSphere Zones in the vCenter Server that match the . The result contains only visible (subject to permission checks) clusters. This method was added in vSphere API 8.0.0.1.

Parameters
  • zone_filter (ClusterCompatibility.ZoneFilterSpec or None) – Specification used to filter the results when listing vSphere Zones. If None, the behavior is equivalent to a with all attributes None which means all available vSphere Zones will be returned.

  • cluster_filter (ClusterCompatibility.FilterSpecV2 or None) – Specification of matching vSphere clusters for which information should be returned. If None, the behavior is equivalent to a with all attributes None which means all NSX-T clusters the user is authorized to view will be returned.

Return type

ClusterCompatibility.ZoneCompatibilityInfo

Returns

Namespaces compatibility information for vSphere Zones that match the and the vSphere clusters associated with them that match the .

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if zone_filter or cluster_filter contain any errors.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege on the vSphere clusters associated with the vSphere Zones.

class com.vmware.vcenter.namespace_management_client.ClusterSizeInfo(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The {\@name cluster-size-info} class provides methods to retrieve various sizes available for enabling Namespaces and information about each size.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(num_supported_pods=None, num_supported_services=None, default_service_cidr=None, default_pod_cidr=None, master_vm_info=None, worker_vm_info=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterSizeInfo.Info class contains the information about limits associated with a SizingHint.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • num_supported_pods (long) – The maximum number of supported pods.

  • num_supported_services (long) – The maximum number of supported services.

  • default_service_cidr (Ipv4Cidr) – Default CIDR range from which Kubernetes allocates service cluster IP addresses.

  • default_pod_cidr (Ipv4Cidr) – Default CIDR range from which Kubernetes allocates pod IP addresses.

  • master_vm_info (ClusterSizeInfo.VmInfo) – Information about Kubernetes API server virtual machine configuration.

  • worker_vm_info (ClusterSizeInfo.VmInfo or None) – Information about worker virtual machine configuration. If None, the configuration of the worker VM is not fixed.

class VmInfo(count=None, cores_per_socket=None, memory=None, capacity=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ClusterSizeInfo.VmInfo class contains the information about the configuration of the virtual machines which would be created for Namespaces.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • count (long) – Number of CPU cores.

  • cores_per_socket (long) – Number of CPU cores per socket.

  • memory (long) – Memory size, in mebibytes.

  • capacity (long) – Overall capacity of the disks in the virtual machine, in mebibytes.

get()

Get information about the default values associated with various sizes.

Return type

dict of SizingHint and ClusterSizeInfo.Info

Returns

Information for each size.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

class com.vmware.vcenter.namespace_management_client.Clusters(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Clusters class provides methods to enable and disable vSphere Namespaces on a vSphere cluster.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Condition(type=None, description=None, status=None, last_transition_time=None, reason=None, severity=None, messages=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.Condition class defines an observation of the configuration state of a Supervisor. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (str) – The type of the condition is a CamelCase, machine readable identifier, indicating the configuration stage. InfrastructureInitialized, ControlPlaneVMsDeployed and ControlPlaneVMsConfigured are examples of such identifiers. This attribute was added in vSphere API 8.0.0.1.

  • description (com.vmware.vapi.std_client.LocalizableMessage) – Description of the condition type in a human readable format. This attribute was added in vSphere API 8.0.0.1.

  • status (Clusters.Condition.Status) – The status of the condition. This attribute was added in vSphere API 8.0.0.1.

  • last_transition_time (datetime.datetime or None) – Last time the condition transitioned from one state to another. A transition happens when the value of status or severity field changes. This attribute was added in vSphere API 8.0.0.1. if None, there are no ongoing operations related to bringing the condition to the desired state.

  • reason (str) – A brief CamelCase message indicating details about the reason for the last transition. FailedWithSystemError, ManagementDNSServersMissing and WaitForNodeUpgrade are examples of such messages. This attribute was added in vSphere API 8.0.0.1.

  • severity (Clusters.Condition.Severity) – Provides an explicit classification of the reason identifier. Set when the value of status is FALSE. This attribute was added in vSphere API 8.0.0.1.

  • messages (list of Clusters.Message) – A list of human-readable messages that provide additional details about the last transition. This attribute was added in vSphere API 8.0.0.1.

class Severity(string)

Bases: vmware.vapi.bindings.enum.Enum

The Clusters.Condition.Severity class represents the severity of the message. This enumeration was added in vSphere API 8.0.0.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Severity instance.

ERROR = Severity(string='ERROR')

Error message. This class attribute was added in vSphere API 8.0.0.1.

INFO = Severity(string='INFO')

Informational message. This class attribute was added in vSphere API 8.0.0.1.

WARNING = Severity(string='WARNING')

Warning message. This class attribute was added in vSphere API 8.0.0.1.

class Status(string)

Bases: vmware.vapi.bindings.enum.Enum

Status of the condition, which can be one of TRUE, FALSE or UNKNOWN. This enumeration was added in vSphere API 8.0.0.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Status instance.

FALSE = Status(string='FALSE')

Indicates that the condition has not reached the desired state. This class attribute was added in vSphere API 8.0.0.1.

TRUE = Status(string='TRUE')

Indicates that the condition has reached the desired state. This class attribute was added in vSphere API 8.0.0.1.

UNKNOWN = Status(string='UNKNOWN')

Indicates that the status of the condition can not be determined. This class attribute was added in vSphere API 8.0.0.1.

class ConfigStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The Clusters.ConfigStatus class describes the status of reaching the desired state configuration for the cluster.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ConfigStatus instance.

CONFIGURING = ConfigStatus(string='CONFIGURING')

The Namespace configuration is being applied to the cluster.

ERROR = ConfigStatus(string='ERROR')

Failed to apply the Namespace configuration to the cluster, user intervention needed.

REMOVING = ConfigStatus(string='REMOVING')

The Namespace configuration is being removed from the cluster.

RUNNING = ConfigStatus(string='RUNNING')

The cluster is configured correctly with the Namespace configuration.

class EnableSpec(size_hint=None, service_cidr=None, network_provider=None, ncp_cluster_network_spec=None, workload_networks_spec=None, workload_ntp_servers=None, load_balancer_config_spec=None, master_management_network=None, master_dns=None, worker_dns=None, master_dns_search_domains=None, master_ntp_servers=None, master_storage_policy=None, ephemeral_storage_policy=None, cns_file_config=None, login_banner=None, master_dns_names=None, image_storage=None, default_image_registry=None, default_image_repository=None, default_kubernetes_service_content_library=None, cluster_proxy_config=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.EnableSpec class contains the specification required to enable vSphere Namespaces on a cluster.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • size_hint (SizingHint) – This affects the size and resources allocated to the Kubernetes API server. It also affects the suggested default serviceCidr and podCidrs.

  • service_cidr (Ipv4Cidr) – CIDR block from which Kubernetes allocates service cluster IP addresses. This range should not overlap with those in Clusters.NCPClusterNetworkEnableSpec.pod_cidrs, Clusters.NCPClusterNetworkEnableSpec.ingress_cidrs, Clusters.NCPClusterNetworkEnableSpec.egress_cidrs, or other services running in the datacenter.

  • network_provider (Clusters.NetworkProvider) – The provider of cluster networking for this vSphere Namespaces cluster.

  • ncp_cluster_network_spec (Clusters.NCPClusterNetworkEnableSpec) – Specification for the NSX Container Plugin cluster network. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN.

  • workload_networks_spec (Clusters.WorkloadNetworksEnableSpec) – Specification for the workload networks to be associated with the cluster. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.VSPHERE_NETWORK.

  • workload_ntp_servers (list of str or None) – List of NTP server DNS names or IP addresses to use for workloads such as Tanzu Kubernetes Grid VMs, specified in order of preference. This attribute was added in vSphere API 7.0.1.0. If None, NTP server for Kubernetes API servers will be used.

  • load_balancer_config_spec (LoadBalancers.ConfigSpec) – The load balancer configuration is derived from the user-provisioned load balancer that will be used to operate a load balancer that fronts vSphere Namespaces cluster servers, Tanzu Kubernetes Grid API servers, and other servers upon request. This configuration is required for network providers that do not have a default load balancer included. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.VSPHERE_NETWORK.

  • master_management_network (Clusters.NetworkSpec) – Specification for the management network on Kubernetes API server. Clusters.NetworkSpec.mode must be STATICRANGE as we require Kubernetes API server to have a stable address.

  • master_dns (list of str or None) – List of DNS server IP addresses to use on Kubernetes API server, specified in order of preference. If None, no default DNS servers are set.

  • worker_dns (list of str or None) – List of DNS server IP addresses to use on the worker nodes, specified in order of preference. If None, no default DNS servers are set.

  • master_dns_search_domains (list of str or None) – List of domains (for example “vmware.com”) to be searched when trying to lookup a host name on Kubernetes API server, specified in order of preference. If None, no default DNS search domains are set.

  • master_ntp_servers (list of str or None) – List of NTP server DNS names or IP addresses to use on Kubernetes API server, specified in order of preference. If None, VMware Tools based time synchronization is enabled.

  • master_storage_policy (str) – Identifier of storage policy associated with Kubernetes API server. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile.

  • ephemeral_storage_policy (str) – Identifier of storage policy associated with ephemeral disks of all the Kubernetes Pods in the cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile.

  • cns_file_config (CNSFileConfig or None) – Specification for configuring Cloud Native Storage file volume support on Supervisor. This feature provides support for provisioning ReadWriteMany persistent volumes on this cluster and/or external clusters. This attribute was added in vSphere API 7.0.3.0. If None, file volume support will not be enabled on this Supervisor.

  • login_banner (str or None) – Disclaimer to be displayed prior to login via the Kubectl plugin. If None, just skip it.

  • master_dns_names (list of str or None) – List of additional DNS names to associate with the Kubernetes API server. These DNS names are embedded in the TLS certificate presented by the API server. If None, no additional DNS names are embedded in the TLS certificate.

  • image_storage (Clusters.ImageStorageSpec) – Specification for storage to be used for container images.

  • default_image_registry (Clusters.ImageRegistry or None) – Default image registry to use when Kubernetes Pod container specification does not specify it as part of the container image name. If None, defaults to Docker Hub.

  • default_image_repository (str or None) – Default image repository to use when Kubernetes Pod container specification does not specify it as part of the container image name. If None, defaults to Docker Hub official repository in case of Docker Hub image registry, otherwise defaults to empty string.

  • default_kubernetes_service_content_library (str or None) – Identifier of the Content Library which holds the VM Images for vSphere Kubernetes Service. This Content Library should be subscribed to VMware’s hosted vSphere Kubernetes Service Repository. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. If None, the Content Library will be automatically generated and configured to the cluster.

  • cluster_proxy_config (ProxyConfiguration or None) – Proxy configuration that will be applied to the Supervisor. The proxy should be reachable from the management network and will be used for image pulling and container traffic exiting out of the Supervisor. This attribute was added in vSphere API 7.0.3.00100. If None the settings will be inherited from the vCenter settings if available.

class ImageRegistry(hostname=None, port=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.ImageRegistry class contains the specification required to configure container image registry endpoint.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (str) – IP address or the hostname of container image registry.

  • port (long or None) – Port number of the container image registry. If None, defaults to 443.

class ImageStorageSpec(storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.ImageStorageSpec class contains the specification required to configure storage used for container images.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

storage_policy (str) – Identifier of the storage policy. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile.

class Info(size_hint=None, stat_summary=None, config_status=None, conditions=None, messages=None, kubernetes_status=None, kubernetes_status_messages=None, api_server_management_endpoint=None, api_server_cluster_endpoint=None, api_servers=None, tls_management_endpoint_certificate=None, tls_endpoint_certificate=None, network_provider=None, ncp_cluster_network_info=None, workload_networks=None, workload_ntp_servers=None, load_balancers=None, service_cidr=None, master_management_network=None, master_dns=None, worker_dns=None, master_storage_policy=None, ephemeral_storage_policy=None, cns_file_config=None, login_banner=None, master_dns_names=None, image_storage=None, default_image_registry=None, default_image_repository=None, master_dns_search_domains=None, master_ntp_servers=None, default_kubernetes_service_content_library=None, cluster_proxy_config=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.Info class contains detailed information about the cluster statistics and status related to vSphere Namespaces.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • size_hint (SizingHint) – Current setting for SizingHint. This affects the size and resources allocated to the Kubernetes API server. This attribute was added in vSphere API 7.0.1.0. This attribute is optional because it was added in a newer version than its parent node.

  • stat_summary (Clusters.Stats) – Basic runtime statistics for the cluster.

  • config_status (Clusters.ConfigStatus) – Current setting for Clusters.ConfigStatus.

  • conditions (list of Clusters.Condition) – The conditions that need to be met for the cluster to reach the desired state. This attribute was added in vSphere API 8.0.0.1. This attribute is optional because it was added in a newer version than its parent node.

  • messages (list of Clusters.Message) – Current set of messages associated with the object.

  • kubernetes_status (Clusters.KubernetesStatus) – Current setting for Clusters.KubernetesStatus.

  • kubernetes_status_messages (list of Clusters.Message) – Current set of messages associated with the object.

  • api_server_management_endpoint (str) – Kubernetes API Server IP address on the management network. This is a floating IP and assigned to one of the control plane VMs on the management network. This endpoint is used by vSphere components.

  • api_server_cluster_endpoint (str) – Kubernetes API Server IP address via cluster network. This is the IP address of the Kubernetes LoadBalancer type service fronting the apiservers. This endpoint is the one configured in kubeconfig after login, and used for most human and application interaction with Kubernetes.

  • api_servers (set of str) – Identifier of the Kubernetes API servers. These are the IP addresses of the VM instances for the Kubernetes control plane on the management network.

  • tls_management_endpoint_certificate (str or None) – PEM-encoded x509 certificate used by TLS endpoint on Kubernetes API servers when accessed from the management network, e.g. from ESX servers or VCSA. set only when Clusters.Info.api_server_management_endpoint is used.

  • tls_endpoint_certificate (str or None) – PEM-encoded x509 certificate used by TLS endpoint on Kubernetes API servers when accessed via the load balancer, e.g. devops user on corporate network. set only when Clusters.Info.api_server_management_endpoint is used.

  • network_provider (Clusters.NetworkProvider) – The provider of cluster networking for this vSphere Namespaces cluster.

  • ncp_cluster_network_info (Clusters.NCPClusterNetworkInfo) – Specification for the NSX Container Plugin cluster network. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN.

  • workload_networks (Clusters.WorkloadNetworksInfo) – Information about workload networks associated with the cluster. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.VSPHERE_NETWORK.

  • workload_ntp_servers (list of str or None) – Information about NTP server DNS names or IP addresses to use for workloads such as Tanzu Kubernetes Grid VMs, specified in order of preference. This attribute was added in vSphere API 7.0.1.0. None when NTP server for Kubernetes API servers is used.

  • load_balancers (list of LoadBalancers.Info) – Information related to the Load balancer used for provisioning virtual servers in the namespace. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.VSPHERE_NETWORK.

  • service_cidr (Ipv4Cidr) – CIDR block from which Kubernetes allocates service cluster IP addresses.

  • master_management_network (Clusters.NetworkSpec) – Specification for the management network on Kubernetes API server. This attribute was added in vSphere API 7.0.1.0. This attribute is optional because it was added in a newer version than its parent node.

  • master_dns (list of str or None) – List of DNS server IP addresses to use on Kubernetes API server, specified in order of preference. If None, no default DNS servers are set.

  • worker_dns (list of str or None) – List of DNS server IP addresses to use for pods that execute on the worker nodes (which are native pods on ESXi hosts in the vSphere Namespaces Supervisor). If None, no default DNS servers are set.

  • master_storage_policy (str) – Identifier of storage policy associated with Kubernetes API server. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile. This attribute is optional because it was added in a newer version than its parent node.

  • ephemeral_storage_policy (str) – Identifier of storage policy associated with ephemeral disks of all the Kubernetes Pods in the cluster. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile. This attribute is optional because it was added in a newer version than its parent node.

  • cns_file_config (CNSFileConfig or None) – Specification for configuring Cloud Native Storage file volume support on Supervisor. This feature provides support for provisioning ReadWriteMany persistent volumes on this cluster and/or external clusters. This attribute was added in vSphere API 7.0.3.0. If None, it means the file volume support is not enabled on this Supervisor.

  • login_banner (str or None) – Disclaimer to be displayed prior to login via the Kubectl plugin. This attribute was added in vSphere API 7.0.1.0. If None, just skip it.

  • master_dns_names (list of str or None) – List of additional DNS names to associate with the Kubernetes API server. These DNS names are embedded in the TLS certificate presented by the API server. This attribute was added in vSphere API 7.0.1.0. If None, no additional DNS names are embedded in the TLS certificate.

  • image_storage (Clusters.ImageStorageSpec) – Specification for storage to be used for container images. This attribute was added in vSphere API 7.0.1.0. This attribute is optional because it was added in a newer version than its parent node.

  • default_image_registry (Clusters.ImageRegistry or None) – Default image registry to use when Kubernetes Pod container specification does not specify it as part of the container image name. This attribute was added in vSphere API 7.0.1.0. If None, defaults to Docker Hub.

  • default_image_repository (str or None) – Default image repository to use when Kubernetes Pod container specification does not specify it as part of the container image name. This attribute was added in vSphere API 7.0.1.0. If None, defaults to Docker Hub official repository in case of Docker Hub image registry, otherwise defaults to empty string.

  • master_dns_search_domains (list of str or None) – List of domains (for example “vmware.com”) to be searched when trying to lookup a host name on Kubernetes API server, specified in order of preference. If None, no default DNS search domains are set.

  • master_ntp_servers (list of str or None) – List of NTP server DNS names or IP addresses to use on Kubernetes API server, specified in order of preference. This attribute was added in vSphere API 7.0.1.0. If None, VMware Tools based time synchronization is enabled.

  • default_kubernetes_service_content_library (str or None) – Identifier of the Content Library which holds the VM Images for vSphere Kubernetes Service. This Content Library should be subscribed to VMware’s hosted vSphere Kubernetes Service Repository. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. If None, a default subscribed Content Library will be created. It will sync VMware-supplied images for Tanzu Kubernetes Grid over the internet.

  • cluster_proxy_config (ProxyConfiguration) – Proxy configuration that is applied to the Supervisor. The proxy should be reachable from the management network and is used for image pulling and container traffic exiting out of the Supervisor. Note that the proxy password will be removed from the URLs as per Section 3.2.1 of RFC3986 security recommendation. This attribute was added in vSphere API 7.0.3.00100. This attribute is optional because it was added in a newer version than its parent node.

class Ipv4Range(starting_address=None, address_count=None, subnet_mask=None, gateway=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.Ipv4Range contains specification to configure multiple interfaces in IPv4. The range of IPv4 addresses is derived by incrementing the startingAddress to the specified addressCount. To use the object for a single IPv4 address specification, set addressCount to 1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • starting_address (str) – The IPv4 address denoting the start of the range.

  • address_count (long) – The number of IP addresses in the range. Addresses are derived by incrementing Clusters.Ipv4Range.starting_address.

  • subnet_mask (str) – Subnet mask to be set.

  • gateway (str) – The IPv4 address of the gateway associated with the range indicated by Clusters.Ipv4Range.starting_address and Clusters.Ipv4Range.address_count.

class KubernetesStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The Clusters.KubernetesStatus class describes the cluster’s ability to deploy pods.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the KubernetesStatus instance.

ERROR = KubernetesStatus(string='ERROR')

The cluster may not be able to accept pods and has error messages.

READY = KubernetesStatus(string='READY')

The cluster is able to accept pods.

WARNING = KubernetesStatus(string='WARNING')

The cluster may be able to accept pods, but has warning messages.

class Message(severity=None, details=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.Message class contains the information about the object configuration.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class Severity(string)

Bases: vmware.vapi.bindings.enum.Enum

The Clusters.Message.Severity class represents the severity of the message.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Severity instance.

ERROR = Severity(string='ERROR')

Error message. This is accompanied by vCenter event and/or alarm.

INFO = Severity(string='INFO')

Informational message. This may be accompanied by vCenter event.

WARNING = Severity(string='WARNING')

Warning message. This may be accompanied by vCenter event.

class NCPClusterNetworkEnableSpec(pod_cidrs=None, ingress_cidrs=None, egress_cidrs=None, cluster_distributed_switch=None, nsx_edge_cluster=None, nsx_tier0_gateway=None, namespace_subnet_prefix=None, routed_mode=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.NCPClusterNetworkEnableSpec class encapsulates the NSX Container Plugin-specific cluster networking configuration parameters for the vSphere Namespaces Cluster Enable operation.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • pod_cidrs (list of Ipv4Cidr) – CIDR blocks from which Kubernetes allocates pod IP addresses. This range should not overlap with those in Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkEnableSpec.ingress_cidrs, Clusters.NCPClusterNetworkEnableSpec.egress_cidrs, or other services running in the datacenter. All Pod CIDR blocks must be of at least subnet size /23.

  • ingress_cidrs (list of Ipv4Cidr) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. These ranges should not overlap with those in Clusters.NCPClusterNetworkEnableSpec.pod_cidrs, Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkEnableSpec.egress_cidrs, or other services running in the datacenter.

  • egress_cidrs (list of Ipv4Cidr) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. These ranges should not overlap with those in Clusters.NCPClusterNetworkEnableSpec.pod_cidrs, Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkEnableSpec.ingress_cidrs, or other services running in the datacenter.

  • cluster_distributed_switch (str or None) – vSphere Distributed Switch used to connect this cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: vSphereDistributedSwitch. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: vSphereDistributedSwitch. This field is required when configuring a cluster that uses NSX-T. If None and using NSXe, the system will choose a suitable vSphere Distributed Switch.

  • nsx_edge_cluster (str or None) – NSX Edge Cluster to be used for Kubernetes Services of type LoadBalancer, Kubernetes Ingresses, and NSX SNAT. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXEdgeCluster. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXEdgeCluster. This field is required when configuring a cluster that uses NSX-T. If None and using NSXe, the system will choose a suitable NSX Edge Cluster.

  • nsx_tier0_gateway (str or None) – NSX Tier0 Gateway used for this cluster. This attribute was added in vSphere API 7.0.2.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXTier0Gateway. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXTier0Gateway. This field is required when configuring a cluster that uses NSX-T.

  • namespace_subnet_prefix (long or None) – Size of the subnet reserved for namespaces segments. This attribute was added in vSphere API 7.0.2.0. If None, defaults to 28.

  • routed_mode (bool or None) – Routed mode for this cluster. When set to True, the traffic in the cluster is not NATed. When this field is set to True, Clusters.NCPClusterNetworkEnableSpec.egress_cidrs is not allowed. This attribute was added in vSphere API 7.0.2.0. If None, defaults to False.

class NCPClusterNetworkInfo(pod_cidrs=None, ingress_cidrs=None, egress_cidrs=None, cluster_distributed_switch=None, nsx_edge_cluster=None, default_ingress_tls_certificate=None, nsx_tier0_gateway=None, namespace_subnet_prefix=None, routed_mode=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.NCPClusterNetworkInfo class contains the NSX Container Plugin-specific cluster networking configuration.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • pod_cidrs (list of Ipv4Cidr) – CIDR blocks from which Kubernetes allocates pod IP addresses.

  • ingress_cidrs (list of Ipv4Cidr) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer.

  • egress_cidrs (list of Ipv4Cidr) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs.

  • cluster_distributed_switch (str) – vSphere Distributed Switch used to connect this cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: vSphereDistributedSwitch. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: vSphereDistributedSwitch.

  • nsx_edge_cluster (str) – NSX Edge Cluster to be used for Kubernetes Services of type LoadBalancer, Kubernetes Ingresses, and NSX SNAT. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXEdgeCluster. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXEdgeCluster.

  • default_ingress_tls_certificate (str) – PEM-encoded x509 certificate used by NSX as a default fallback certificate for Kubernetes Ingress services.

  • nsx_tier0_gateway (str or None) – NSX Tier0 Gateway used for this cluster. This attribute was added in vSphere API 7.0.2.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXTier0Gateway. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXTier0Gateway. This is set when the cluster uses NSX-T.

  • namespace_subnet_prefix (long or None) – Size of the subnet reserved for namespaces segments. This attribute was added in vSphere API 7.0.2.0. If None, defaults to 28.

  • routed_mode (bool or None) – Routed mode for this cluster. This attribute was added in vSphere API 7.0.2.0. If None, defaults to False.

class NCPClusterNetworkSetSpec(pod_cidrs=None, ingress_cidrs=None, egress_cidrs=None, default_ingress_tls_certificate=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.NCPClusterNetworkSetSpec class encapsulates the NSX Container Plugin-specific cluster networking configuration parameters for the vSphere Namespaces Cluster Set operation.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • pod_cidrs (list of Ipv4Cidr) – CIDR blocks from which Kubernetes allocates pod IP addresses. This range should not overlap with those in Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkSetSpec.ingress_cidrs, Clusters.NCPClusterNetworkSetSpec.egress_cidrs, or other services running in the datacenter. A set operation only allows for addition of new CIDR blocks to the existing list. All Pod CIDR blocks must be of at least subnet size /23.

  • ingress_cidrs (list of Ipv4Cidr) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. These ranges should not overlap with those in Clusters.NCPClusterNetworkSetSpec.pod_cidrs, Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkSetSpec.egress_cidrs, or other services running in the datacenter. A set operation only allows for addition of new CIDR blocks to the existing list.

  • egress_cidrs (list of Ipv4Cidr) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. These ranges should not overlap with those in Clusters.NCPClusterNetworkSetSpec.pod_cidrs, Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkSetSpec.ingress_cidrs, or other services running in the datacenter. A set operation only allows for addition of new CIDR blocks to the existing list.

  • default_ingress_tls_certificate (str) – PEM-encoded x509 certificate used by NSX as a default fallback certificate for Kubernetes Ingress services.

class NCPClusterNetworkUpdateSpec(pod_cidrs=None, ingress_cidrs=None, egress_cidrs=None, default_ingress_tls_certificate=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.NCPClusterNetworkUpdateSpec class encapsulates the NSX Container Plugin-specific cluster networking configuration parameters for the vSphere Namespaces Cluster Update operation.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • pod_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which Kubernetes allocates pod IP addresses. This range should not overlap with those in Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkUpdateSpec.ingress_cidrs, Clusters.NCPClusterNetworkUpdateSpec.egress_cidrs, or other services running in the datacenter. An update operation only allows for addition of new CIDR blocks to the existing list. All Pod CIDR blocks must be of at least subnet size /23. If None, CIDRs from which Kubernetes allocates pod IP addresses will not be modified.

  • ingress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. These ranges should not overlap with those in Clusters.NCPClusterNetworkUpdateSpec.pod_cidrs, Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkUpdateSpec.egress_cidrs, or other services running in the datacenter. An update operation only allows for addition of new CIDR blocks to the existing list. If None, CIDRs from which Kubernetes allocates ingress IP addresses will not be modified.

  • egress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. These ranges should not overlap with those in Clusters.NCPClusterNetworkUpdateSpec.pod_cidrs, Clusters.EnableSpec.service_cidr, Clusters.NCPClusterNetworkUpdateSpec.ingress_cidrs, or other services running in the datacenter. An update operation only allows for addition of new CIDR blocks to the existing list. If None, CIDR from which Kubernetes allocates egress IP addresses will not be modified.

  • default_ingress_tls_certificate (str or None) – PEM-encoded x509 certificate used by NSX as a default fallback certificate for Kubernetes Ingress services. If None, the Kubernetes Ingress services certificate will not be modified.

class NetworkProvider(string)

Bases: vmware.vapi.bindings.enum.Enum

Identifies the network plugin that cluster networking functionalities for this vSphere Namespaces Cluster.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the NetworkProvider instance.

NSXT_CONTAINER_PLUGIN = NetworkProvider(string='NSXT_CONTAINER_PLUGIN')

NSX-T Container Plugin.

VSPHERE_NETWORK = NetworkProvider(string='VSPHERE_NETWORK')

vSphere Networking. This class attribute was added in vSphere API 7.0.1.0.

class NetworkSpec(floating_ip=None, network=None, mode=None, address_range=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.NetworkSpec contains information related to network configuration for one or more interfaces.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • floating_ip (str or None) – Optionally specify the Floating IP used by the cluster control plane in case of DHCP. If None, the existing effective management network floating IP will be used.

  • network (str) – Identifier for the network. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network.

  • mode (Clusters.NetworkSpec.Ipv4Mode) – The address assignment mode.

  • address_range (Clusters.Ipv4Range) – Settings for the interfaces on the network. This attribute is optional and it is only relevant when the value of mode is Clusters.NetworkSpec.Ipv4Mode.STATICRANGE.

class Ipv4Mode(string)

Bases: vmware.vapi.bindings.enum.Enum

The Clusters.NetworkSpec.Ipv4Mode class defines various IPv4 address assignment modes.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Ipv4Mode instance.

DHCP = Ipv4Mode(string='DHCP')

The address is automatically assigned by a DHCP server.

STATICRANGE = Ipv4Mode(string='STATICRANGE')

The address is static.

class SetSpec(size_hint=None, floating_ip=None, network_provider=None, ncp_cluster_network_spec=None, master_dns=None, worker_dns=None, master_dns_search_domains=None, master_ntp_servers=None, master_storage_policy=None, ephemeral_storage_policy=None, cns_file_config=None, login_banner=None, image_storage=None, default_image_registry=None, default_image_repository=None, default_kubernetes_service_content_library=None, workload_ntp_servers=None, cluster_proxy_config=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.SetSpec class contains the specification required to set a new configuration on the Cluster. This class is applied in entirety, replacing the current specification fully.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • size_hint (SizingHint) – This affects the size and resources allocated to the Kubernetes API server.

  • floating_ip (str or None) – Optionally, you can edit the floating IP address that is assigned to the Supervisor in case the DHCP server fails during the Supervisor enablement process. The field is only relevant when the DHCP mode of the Supervisor management network is set with Clusters.EnableSpec.master_management_network. Set this floating IP parameter to remediate a supervisor enablement failure in the case where it was detected that the DHCP server does not support DHCP client identifiers. This attribute was added in vSphere API 7.0.3.0. If None, the existing effective management network floating IP will not be modified.

  • network_provider (Clusters.NetworkProvider) – The provider of cluster networking for this vSphere Namespaces cluster.

  • ncp_cluster_network_spec (Clusters.NCPClusterNetworkSetSpec) – Specification for the NSX Container Plugin cluster network. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN.

  • master_dns (list of str or None) – List of DNS server IP addresses to use on Kubernetes API server, specified in order of preference. If None, DNS servers set on Kubernetes API server will be cleared.

  • worker_dns (list of str or None) – List of DNS server IP addresses to use on the worker nodes, specified in order of preference. If None, DNS servers set on worker nodes will be cleared.

  • master_dns_search_domains (list of str or None) – List of domains (for example “vmware.com”) to be searched when trying to lookup a host name on Kubernetes API server, specified in order of preference. If None, DNS search domains set on Kubernetes API server will be cleared.

  • master_ntp_servers (list of str or None) – List of NTP server DNS names or IP addresses to use on Kubernetes API server, specified in order of preference. If None, VMware Tools based time synchronization is enabled and any set NTP servers are cleared.

  • master_storage_policy (str) – Identifier of storage policy associated with Kubernetes API server. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile.

  • ephemeral_storage_policy (str) – Identifier of storage policy associated with ephemeral disks of all the Kubernetes Pods in the cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile.

  • cns_file_config (CNSFileConfig or None) – Specification for configuring Cloud Native Storage file volume support on Supervisor. This feature provides support for provisioning ReadWriteMany persistent volumes on this cluster and/or external clusters. This attribute was added in vSphere API 7.0.3.0. If None, file volume support will not be enabled on this Supervisor.

  • login_banner (str or None) – Disclaimer to be displayed prior to login via the Kubectl plugin. If None, disclaimer to be displayed prior to login via the Kubectl plugin will be cleared.

  • image_storage (Clusters.ImageStorageSpec) – Specification for storage to be used for container images.

  • default_image_registry (Clusters.ImageRegistry or None) – Default image registry to use when Kubernetes Pod container specification does not specify it as part of the container image name. If None, default image registry will be set to Docker Hub.

  • default_image_repository (str or None) – Default image repository to use when Kubernetes Pod container specification does not specify it as part of the container image name. If None, default image repository will be set to Docker Hub official repository in case of Docker Hub image registry, otherwise will be set to empty string.

  • default_kubernetes_service_content_library (str or None) – Identifier of the Content Library which holds the VM Images for vSphere Kubernetes Service. This Content Library should be subscribed to VMware’s hosted vSphere Kubernetes Service Repository. Modifying or clearing the Content Library identifier will not affect existing vSphere Kubernetes Service clusters. However, upgrades or scale-out of existing clusters may be affected if the new Content Library doesn’t have the necessary VM Images. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. If None, the Content Library identifier will be cleared.

  • workload_ntp_servers (list of str or None) – List of NTP server DNS names or IP addresses to use for workloads such as Tanzu Kubernetes Grid VMs, specified in order of preference. This attribute was added in vSphere API 7.0.1.0. If None, NTP for Kubernetes API servers will be used.

  • cluster_proxy_config (ProxyConfiguration or None) – Proxy configuration that will be applied to the Supervisor. The proxy should be reachable from the management network and will be used for image pulling and container traffic exiting out of the Supervisor. Modifying these settings will result in a restart of the container runtime. Workloads might fail to pull their images for a short period of time. There will be no effect on the currently running containers. This attribute was added in vSphere API 7.0.3.00100. If None the settings will be inherited from the vCenter settings if available.

class Stats(cpu_used=None, cpu_capacity=None, memory_used=None, memory_capacity=None, storage_used=None, storage_capacity=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.Stats class contains the basic runtime statistics about a vSphere Namespaces-enabled cluster.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cpu_used (long) – Overall CPU usage of the cluster, in MHz. This is the sum of CPU usage across all worker nodes in the cluster.

  • cpu_capacity (long) – Total CPU capacity in the cluster available for vSphere Namespaces, in MHz. This is the sum of CPU capacities from all worker nodes in the cluster.

  • memory_used (long) – Overall memory usage of the cluster, in mebibytes. This is the sum of memory usage across all worker nodes in the cluster.

  • memory_capacity (long) – Total memory capacity of the cluster available for vSphere Namespaces, in mebibytes. This is the sum of memory capacities from all worker nodesin the cluster.

  • storage_used (long) – Overall storage used by the cluster, in mebibytes. This is the sum of storage used across all worker nodes in the cluster.

  • storage_capacity (long) – Overall storage capacity of the cluster available for vSphere Namespaces, in mebibytes. This is the sum of total storage available from all worker nodes in the cluster.

class Summary(cluster=None, cluster_name=None, stats=None, config_status=None, kubernetes_status=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.Summary class contains the basic information about the cluster statistics and status related to vSphere Namespaces.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier for the cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • cluster_name (str) – Name of the cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource.name. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.name.

  • stats (Clusters.Stats) – Basic runtime statistics for the cluster.

  • config_status (Clusters.ConfigStatus) – Current setting for Clusters.ConfigStatus.

  • kubernetes_status (Clusters.KubernetesStatus) – Current setting for Clusters.KubernetesStatus.

class UpdateSpec(size_hint=None, floating_ip=None, network_provider=None, ncp_cluster_network_spec=None, master_dns=None, worker_dns=None, master_dns_search_domains=None, master_ntp_servers=None, master_storage_policy=None, ephemeral_storage_policy=None, cns_file_config=None, login_banner=None, image_storage=None, default_image_registry=None, default_image_repository=None, tls_endpoint_certificate=None, default_kubernetes_service_content_library=None, workload_ntp_servers=None, cluster_proxy_config=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.UpdateSpec class contains the specification required to update the configuration on the Cluster. This class is applied partially, and only the specified fields will replace or modify their existing counterparts.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • size_hint (SizingHint or None) – This affects the size and resources allocated to the Kubernetes API server. If None, size and resources allocated to Kubernetes API server will not be modified.

  • floating_ip (str or None) – Optionally, you can edit the floating IP address that is assigned to the Supervisor in case the DHCP server fails during the Supervisor enablement process. The field is only relevant when the DHCP mode of the Supervisor management network is set with Clusters.EnableSpec.master_management_network. Set this floating IP parameter to remediate a supervisor enablement failure in the case where it was detected that the DHCP server does not support DHCP client identifiers. This attribute was added in vSphere API 7.0.3.0. If None, the existing effective management network floating IP will not be modified.

  • network_provider (Clusters.NetworkProvider or None) – The provider of cluster networking for this vSphere Namespaces cluster. If None, the existing effective cluster network specification will not be modified.

  • ncp_cluster_network_spec (Clusters.NCPClusterNetworkUpdateSpec or None) – Updated specification for the cluster network configuration. If None, the existing effective cluster network specification will not be modified.

  • master_dns (list of str or None) – List of DNS server IP addresses to use on Kubernetes API server, specified in order of preference. If set, DNS servers set on Kubernetes API server will be replaced. Otherwise, they will not be modified.

  • worker_dns (list of str or None) – List of DNS server IP addresses to use on the worker nodes, specified in order of preference. If set, DNS servers set on worker nodes will be replaced. Otherwise, they will not be modified.

  • master_dns_search_domains (list of str or None) – List of domains (for example “vmware.com”) to be searched when trying to lookup a host name on Kubernetes API server, specified in order of preference. If set, DNS search domains on Kubernetes API server will be replaced. Otherwise, they will not be modified.

  • master_ntp_servers (list of str or None) – List of NTP server DNS names or IP addresses to use on Kubernetes API server, specified in order of preference. If set, NTP servers on Kubernetes API server will be replaced. Otherwise, they will not be modified.

  • master_storage_policy (str or None) – Identifier of storage policy associated with Kubernetes API server. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile. If None, storage policy associated with Kubernetes API server will not be modified.

  • ephemeral_storage_policy (str or None) – Identifier of storage policy associated with ephemeral disks of all the Kubernetes Pods in the cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile. If None, storage policy associated with ephemeral disks of all the Kubernetes Pods will not be modified.

  • cns_file_config (CNSFileConfig or None) – Specification for configuring Cloud Native Storage file volume support on Supervisor. This feature provides support for provisioning ReadWriteMany persistent volumes on this cluster and/or external clusters. This attribute was added in vSphere API 7.0.3.0. If None, configuration for file volumes will remain unchanged.

  • login_banner (str or None) – Disclaimer to be displayed prior to login via the Kubectl plugin. If None, disclaimer to be displayed prior to login via the Kubectl plugin will not be modified.

  • image_storage (Clusters.ImageStorageSpec or None) – Specification for storage to be used for container images. If None, configuration of storage used for container images is not modified.

  • default_image_registry (Clusters.ImageRegistry or None) – Default image registry to use when Kubernetes Pod container specification does not specify it as part of the container image name. If None, default image registry will not be modified.

  • default_image_repository (str or None) – Default image repository to use when Kubernetes Pod container specification does not specify it as part of the container image name. If None, default image repository will not be modified.

  • tls_endpoint_certificate (str or None) – Certificate issued for Kubernetes API Server. Certificate used must be created by signing the Certificate Signing Request obtained from the Namespace Certificate Management API. Because a Kubernetes CertificateSigningRequest is created on an existing Namespaces-enabled cluster, you must use the Clusters.UpdateSpec to specify this Clusters.UpdateSpec.tls_endpoint_certificate on an existing cluster rather than during initially enabling Namespaces on a cluster. If None, Kubernetes API Server certificate will not be modified.

  • default_kubernetes_service_content_library (str or None) – Identifier of the Content Library which holds the VM Images for vSphere Kubernetes Service. This Content Library should be subscribed to VMware’s hosted vSphere Kubernetes Service Repository. Modifying or clearing the Content Library identifier will not affect existing vSphere Kubernetes Service clusters. However, upgrades or scale-out of existing clusters may be affected if the new Content Library doesn’t have the necessary VM Images. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. If None, the Content Library will will not be modified.

  • workload_ntp_servers (list of str or None) – List of NTP server DNS names or IP addresses to use for workloads such as Tanzu Kubernetes Grid VMs, specified in order of preference. This attribute was added in vSphere API 7.0.1.0. If None, NTP servers for workloads will be unmodified.

  • cluster_proxy_config (ProxyConfiguration or None) – Proxy configuration that will be applied to the Supervisor. The proxy should be reachable from the management network and will be used for image pulling and container traffic exiting out of the Supervisor. Modifying these settings will result in a restart of the container runtime. Workloads might fail to pull their images for a short period of time. There will be no effect on the currently running containers. This attribute was added in vSphere API 7.0.3.00100. If None no change will be made to the cluster.

class WorkloadNetworksEnableSpec(supervisor_primary_workload_network=None, network_list=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.WorkloadNetworksEnableSpec contains the specification required to configure workload networks for a vSphere Namespaces Cluster during Enable operation. These workload networks will be used as backing network for Tanzu Kubernetes Cluster VMs and Kubernetes control plane VMs. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor_primary_workload_network (Networks.CreateSpec) – The of the vSphere Namespaces network that will be used by Kubernetes control plane VMs to expose Kubernetes API server to devops users and other workloads. It can also used as backing network for Tanzu Kubernetes Cluster VMs. This attribute was added in vSphere API 7.0.1.0.

  • network_list (list of Networks.CreateSpec or None) – classes for additional list of vSphere Namespaces networks to be associated with this cluster. This attribute was added in vSphere API 7.0.1.0. If None no additional networks will be associated with the cluster.

class WorkloadNetworksInfo(supervisor_primary_workload_network=None, network_list=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Clusters.WorkloadNetworksInfo contains information related to configuration of vSphere Namespaces Network objects. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor_primary_workload_network (Networks.Info) – vSphere Namespaces network used by Kubernetes control plane VMs to access load-balanced services on the various workload networks. This attribute was added in vSphere API 7.0.1.0.

  • network_list (list of Networks.Info or None) – List of vSphere Namespaces networks associated with this cluster. This attribute was added in vSphere API 7.0.1.0. If None no additional networks are associated with the cluster.

disable(cluster)

Disable vSphere Namespaces on the cluster. This operation tears down the Kubernetes instance and the worker nodes associated with vSphere Namespaces enabled cluster.

Parameters

cluster (str) – Identifier for the cluster for which vSphere Namespaces will be disabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the Supervisor cluster is being restored from a backup. When a Supervisor cluster is restored, there’s a window of time during which the restored Supervisor cluster’s state is being synchronized back to vCenter. During that time, Supervisor cluster’s disablement is not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor cluster could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

enable(cluster, spec)

Enable vSphere Namespaces on the cluster. This operation sets up Kubernetes instance for the cluster along with worker nodes.

Parameters
  • cluster (str) – Identifier for the cluster on which vSphere Namespaces will be enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (Clusters.EnableSpec) – Specification for setting up the Kubernetes API server and the worker nodes.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the cluster already has vSphere Namespaces enabled.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if resources/objects could not be located.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if the specified cluster is not licensed or resource pool reservation for control plane VMs fails.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster is not supported for vSphere Namespaces, the cluster’s hosts do not have the required ESX version, or for any other incompatibilities.

get(cluster)

Returns information about a specific cluster.

Parameters

cluster (str) – Identifier for the cluster on which vSphere Namespaces are enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

Clusters.Info

Returns

Information about the desired state of the specified cluster.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster could not be located.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster does not have vSphere Namespaces enabled.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list()

Returns information about all clusters on which vSphere Namespaces are enabled on this vCenter.

Return type

list of Clusters.Summary

Returns

List of summary of all clusters with vSphere Namespaces enabled.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

rotate_password(cluster)

Request a new root password for all control plane nodes in the cluster. This operation generates a new root password and configures every control plane node in the cluster to accept it for authentication.

Parameters

cluster (str) – Identifier for the cluster for which the password is being generated. The parameter must be an identifier for the resource type: ClusterComputeResource.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the cluster is in the process of password rotation.

set(cluster, spec)

Set a new configuration on the cluster object. The specified configuration is applied in entirety and will replace the current configuration fully.

Parameters
  • cluster (str) – Identifier for the cluster on which vSphere Namespaces is enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (Clusters.SetSpec) – New specification for the Supervisor cluster.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if vSphere Namespaces is being disabled on this Supervisor cluster or if the Supervisor cluster is being restored from a backup. When a Supervisor cluster is restored, there’s a window of time during which the restored Supervisor cluster’s state is being synchronized back to vCenter. During that time, Supervisor cluster’s configuration modifications are not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor cluster could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the Supervisor cluster’s hosts are not configured with sufficient resources for the new Kubernetes API Server size.

update(cluster, spec)

Update configuration on the cluster object. The specified configuration is applied partially and None fields in spec will leave those parts of configuration as-is.

Parameters
  • cluster (str) – Identifier for the cluster on which vSphere Namespaces is enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (Clusters.UpdateSpec) – New specification for the Supervisor cluster.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if vSphere Namespaces is being disabled on this Supervisor cluster or if the Supervisor cluster is being restored from a backup. When a Supervisor cluster is restored, there’s a window of time during which the restored Supervisor cluster’s state is being synchronized back to vCenter. During that time, Supervisor cluster’s configuration modifications are not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor cluster could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the Supervisor cluster’s hosts are not configured with sufficient resources for the new Kubernetes API Server size.

class com.vmware.vcenter.namespace_management_client.DistributedSwitchCompatibility(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The DistributedSwitchCompatibility class provides methods to get Namespaces compatibility information of Distributed Switches in this vCenter.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class FilterSpec(compatible=None, network_provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DistributedSwitchCompatibility.FilterSpec class contains attributes used to filter the results when listing Distributed Switches (see DistributedSwitchCompatibility.list()) and their compatibility information.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • compatible (bool or None) – Compatibility criteria for matching the filter. If true, only Distributed Switches which are compatible with vSphere Namespaces match the filter. If false, only Distributed Switches which are incompatible with vSphere Namespaces match the filter. If None, both compatible and incompatible Distributed Switches match the filter.

  • network_provider (Clusters.NetworkProvider or None) – The network provider whose networks will be considered. If unset, this will default to NSXT_CONTAINER_PLUGIN. This attribute was added in vSphere API 7.0.1.0. This attribute is optional because it was added in a newer version than its parent node.

class Summary(distributed_switch=None, compatible=None, incompatibility_reasons=None, network_provider=None, compatible_networks=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DistributedSwitchCompatibility.Summary class contains information about the compatibility of a vSphere Distributed Switch with the Namespaces feature.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • distributed_switch (str) – Identifier of the switch. If DistributedSwitchCompatibility.Summary.network_provider is either None or is set to NSXT_CONTAINER_PLUGIN, the value of this field will refer to the UUID of a vim.DistributedVirtualSwitch. Otherwise, the value of the field will refer to the ID of a vim.DistributedVirtualSwitch. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: vSphereDistributedSwitch. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: vSphereDistributedSwitch.

  • compatible (bool) – Compatibility of this switch with vSphere Namespaces.

  • incompatibility_reasons (list of com.vmware.vapi.std_client.LocalizableMessage or None) – List of reasons for incompatibility. If None, this Distributed Switch is compatible.

  • network_provider (Clusters.NetworkProvider or None) – The network provider whose networks were considered. This attribute was added in vSphere API 7.0.1.0. If None, clients clients should assume the value to be NSXT_CONTAINER_PLUGIN.

  • compatible_networks (list of str or None) – List of compatible (PortGroup) Networks under the distributed switch. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: Network. This attribute is optional because it was added in a newer version than its parent node.

list(cluster, filter=None)

Returns Namespaces compatibility information of Distributed Switches in vCenter associated with the vCenter cluster, matching the DistributedSwitchCompatibility.FilterSpec.

Parameters
  • cluster (str) – Identifier of a vCenter Cluster. Only Distributed Switches associated with the vCenter Cluster will be considered by the filter. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • filter (DistributedSwitchCompatibility.FilterSpec or None) – Specification of matching Distributed Switches for which information should be returned. If None, the behavior is equivalent to a DistributedSwitchCompatibility.FilterSpec with all attributes None which means all Distributed Switches match the filter.

Return type

list of DistributedSwitchCompatibility.Summary

Returns

Namespaces compatibility information for Distributed Switches matching the the DistributedSwitchCompatibility.FilterSpec.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InternalServerError if the server reports an unknown internal error.

Raise

com.vmware.vapi.std.errors_client.NotFound if no cluster with the given cluster ID can be found

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management_client.EdgeClusterCompatibility(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The EdgeClusterCompatibility class provides methods to get Namespaces compatibility information of NSX Edge Clusters.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class FilterSpec(compatible=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The EdgeClusterCompatibility.FilterSpec class contains attributes used to filter the results when listing Edge Clusters (see EdgeClusterCompatibility.list()) and their compatibility information.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

compatible (bool or None) – Compatibility criteria for matching the filter. If true, only Edge Clusters which are compatible with vSphere Namespaces match the filter. If false, only Edge Clusters which are incompatible with vSphere Namespaces match the filter. If None, both compatible and incompatible Edge Clusters match the filter.

class Summary(edge_cluster=None, display_name=None, compatible=None, incompatibility_reasons=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The EdgeClusterCompatibility.Summary class contains information about an NSX-T Edge Cluster, including its compatibility with the vCenter Namespaces feature.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • edge_cluster (str) – Identifier of the Edge Cluster. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXEdgeCluster. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXEdgeCluster.

  • display_name (str) – Display name of the Edge Cluster.

  • compatible (bool) – Compatibility of this Edge Cluster with Namespaces feature.

  • incompatibility_reasons (list of com.vmware.vapi.std_client.LocalizableMessage or None) – List of reasons for incompatibility. If None, this Edge Cluster is compatible.

list(cluster, distributed_switch, filter=None)

Returns Namespaces compatibility information of NSX-T Edge Clusters matching the EdgeClusterCompatibility.FilterSpec.

Parameters
  • cluster (str) – Identifier of a vCenter Cluster. Only Edge Clusters that are associated with the particular vCenter Cluster will be considered by the filter. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • distributed_switch (str) – Identifier of a Distributed Switch. Only Edge Clusters that are associated with the particular Distributed Switch will be considered by the filter. The parameter must be an identifier for the resource type: vSphereDistributedSwitch.

  • filter (EdgeClusterCompatibility.FilterSpec or None) – Specification of matching Edge Clusters for which information should be returned. If None, the behavior is equivalent to a EdgeClusterCompatibility.FilterSpec with all attributes None which means all Edge Clusters match the filter.

Return type

list of EdgeClusterCompatibility.Summary

Returns

List of summaries of Edge Clusters associated with the given vCenter Cluster and Distributed Switch matching the EdgeClusterCompatibility.FilterSpec.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InternalServerError if the server reports an unknown internal error.

Raise

com.vmware.vapi.std.errors_client.NotFound if no cluster with the given cluster ID can be found

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management_client.HostsConfig(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The HostsConfig class provides methods to retrieve information about vSphere Namespaces support and licensing.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(namespaces_supported=None, namespaces_licensed=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The HostsConfig.Info class contains information about vSphere Namespaces support and licensing.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • namespaces_supported (bool) – True if vSphere Namespace feature is supported in this VC.

  • namespaces_licensed (bool) – True if vSphere Namespace feature is licensed on any hosts in this VC.

get()

Returns support and licensing information about hosts under a VC.

Return type

HostsConfig.Info

Returns

Information about vSphere Namespaces support and licensing.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management_client.IPRange(address=None, count=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The IPRange class is used to express a range of IP addresses. The formats supported by this structure will depend on the IP addressing scheme that is being used by vSphere Namespaces. Currently, vSphere Namespaces only supports IPv4. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – The starting address of the range. This attribute was added in vSphere API 7.0.1.0.

  • count (long) – The number of IP addresses in the range. This attribute was added in vSphere API 7.0.1.0.

class com.vmware.vcenter.namespace_management_client.Ipv4Cidr(address=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Ipv4Cidr class contains the specification for representing CIDR notation of IP range. For example, this can be used to represent 256 IP addresses using 10.10.10.0/24.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – The IPv4 address.

  • prefix (long) – The CIDR prefix.

class com.vmware.vcenter.namespace_management_client.LoadBalancers(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

LoadBalancers represent the user provisioned load balancers. The load balancers provided may be used to front the API servers in both, vSphere Namespaces Cluster and Tanzu Kubernetes Grid clusters. Note: The lifecycle of these load balancers is not managed by vSphere. This class was added in vSphere API 7.0.1.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class AviConfigCreateSpec(server=None, username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

LoadBalancers.AviConfigCreateSpec captures the configuration data required for integration with the Avi Software Load Balancer. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • server (LoadBalancers.Server) – Server is the address for the Avi Controller, used to configure Virtual Servers. This attribute was added in vSphere API 7.0.2.0.

  • username (str) – An administrator user name for accessing the Avi Controller. This attribute was added in vSphere API 7.0.2.0.

  • password (str) – The password for the administrator user. This attribute was added in vSphere API 7.0.2.0.

  • certificate_authority_chain (str) – CertificateAuthorityChain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.2.0.

class AviConfigSetSpec(server=None, username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

LoadBalancers.AviConfigSetSpec captures the configuration data required for integration with the Avi Software Load Balancer. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • server (LoadBalancers.Server) – Server is the address for the Avi Controller, used to configure Virtual Servers. Note: This field cannot be updated and should match existing value. This attribute was added in vSphere API 7.0.3.0.

  • username (str) – An administrator user name for accessing the Avi Controller. This attribute was added in vSphere API 7.0.3.0.

  • password (str) – The password for the administrator user. This attribute was added in vSphere API 7.0.3.0.

  • certificate_authority_chain (str) – CertificateAuthorityChain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.3.0.

class AviConfigUpdateSpec(username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

LoadBalancers.AviConfigUpdateSpec captures the configuration data required for integration with the Avi Software Load Balancer. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • username (str or None) – An administrator user name for accessing the Avi Controller. This attribute was added in vSphere API 7.0.3.0. If None, the existing username will not be modified.

  • password (str or None) – The password for the administrator user. This attribute was added in vSphere API 7.0.3.0. If None, the existing password will not be modified.

  • certificate_authority_chain (str or None) – CertificateAuthorityChain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.3.0. If None, the existing PEM-encoded CA chain will not be modified.

class AviInfo(server=None, username=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LoadBalancers.AviInfo contains information related to the Avi software load balancer in the namespace. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • server (LoadBalancers.Server) – Server is the address for the Avi Controller, used to configure Virtual Servers. This attribute was added in vSphere API 7.0.2.0.

  • username (str) – An administrator user name for accessing the Avi Controller. This attribute was added in vSphere API 7.0.2.0.

  • certificate_authority_chain (str) – PEM-encoded CA certificate chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.2.0.

class ConfigSpec(id=None, address_ranges=None, provider=None, ha_proxy_config_create_spec=None, avi_config_create_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LoadBalancers.ConfigSpec encapsulates load balancer configuration on vSphere Namespaces. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – An identifier that identifies a load balancer and can be used to query or configure load balancer properties via these resources. The identifier has DNS_LABEL restrictions as specified in ` <https://tools.ietf.org/html/rfc1123>`_. This must be an alphanumeric (a-z and 0-9) string, with a maximum length of 63 characters and with the ‘-‘ character allowed anywhere except the first or last character. This name is unique across all Namespaces in this vCenter server. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig.

  • address_ranges (list of IPRange) – List of address ranges that will be used to derive frontend IP addresses for L4 virtual servers. This field is ignored in case of AVI load balancer provider. In case of HA_PROXY load balancer provider, at least one range must be provided. This attribute was added in vSphere API 7.0.1.0.

  • provider (LoadBalancers.Provider) – The LoadBalancers.ConfigSpec.provider selects a provider from the list of available providers to be used with vSphere Namespaces. This attribute was added in vSphere API 7.0.1.0.

  • ha_proxy_config_create_spec (LoadBalancers.HAProxyConfigCreateSpec) – The LoadBalancers.HAProxyConfigCreateSpec is a conditional configuration made available upon selecting the HA_PROXY load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of provider is LoadBalancers.Provider.HA_PROXY.

  • avi_config_create_spec (LoadBalancers.AviConfigCreateSpec) – The LoadBalancers.AviConfigCreateSpec is a conditional configuration made available upon selecting the AVI load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.2.0. This attribute is optional and it is only relevant when the value of provider is LoadBalancers.Provider.AVI.

class HAProxyConfigCreateSpec(servers=None, username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

LoadBalancers.HAProxyConfigCreateSpec captures the configuration data required for Supervisor Service Type:LoadBalancer to have an external load balancer be created via HAProxy. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • servers (list of LoadBalancers.Server) – Servers is a list of the addresses for the data plane API servers used to configure Virtual Servers. This attribute was added in vSphere API 7.0.1.0.

  • username (str) – An administrator user name for accessing the HAProxy Data Plane API server. This attribute was added in vSphere API 7.0.1.0.

  • password (str) – The password for the administrator user. This attribute was added in vSphere API 7.0.1.0.

  • certificate_authority_chain (str) – CertificateAuthorityChain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.1.0.

class HAProxyConfigSetSpec(servers=None, username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

LoadBalancers.HAProxyConfigSetSpec captures the configuration data required for Supervisor Service Type:LoadBalancer to have an external load balancer be created via HA Proxy. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • servers (list of LoadBalancers.Server) – Servers is a list of the addresses for the data plane API servers used to configure HAProxy. Note: This field cannot be updated and should match existing list of servers. This attribute was added in vSphere API 7.0.3.0.

  • username (str) – An administrator user name for accessing the HAProxy Data Plane API server. This attribute was added in vSphere API 7.0.3.0.

  • password (str) – The password for the administrator user. This attribute was added in vSphere API 7.0.3.0.

  • certificate_authority_chain (str) – CertificateAuthorityChain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.3.0.

class HAProxyConfigUpdateSpec(username=None, password=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

LoadBalancers.HAProxyConfigUpdateSpec captures the configuration data required for Supervisor Service Type:LoadBalancer to have an external load balancer be created via HAProxy. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • username (str or None) – An administrator user name for accessing the HAProxy Data Plane API server. This attribute was added in vSphere API 7.0.3.0. If None, the existing username will not be modified.

  • password (str or None) – The password for the administrator user. This attribute was added in vSphere API 7.0.3.0. If None, the existing password will not be modified.

  • certificate_authority_chain (str or None) – CertificateAuthorityChain contains PEM-encoded CA chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.3.0. If None, the existing PEM-encoded CA chain will not be modified.

class HAProxyInfo(servers=None, username=None, certificate_authority_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LoadBalancers.HAProxyInfo contains information related to the HAProxy load balancer in the namespace. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • servers (list of LoadBalancers.Server) – A list of the addresses for the DataPlane API servers used to configure HAProxy. This attribute was added in vSphere API 7.0.1.0.

  • username (str) – An administrator user name for accessing the HAProxy Data Plane API server. This attribute was added in vSphere API 7.0.1.0.

  • certificate_authority_chain (str) – PEM-encoded CA certificate chain which is used to verify x509 certificates received from the server. This attribute was added in vSphere API 7.0.1.0.

class Info(id=None, address_ranges=None, provider=None, ha_proxy_info=None, avi_info=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LoadBalancers.Info contains information related to the load balancer for provisioning virtual servers in the namespace. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – An DNS compliant identifier for a load balancer, which can be used to query or configure the load balancer properties. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig.

  • address_ranges (list of IPRange) – IP address range from which virtual servers are assigned their IPs. This attribute was added in vSphere API 7.0.1.0.

  • provider (LoadBalancers.Provider) – Load balancer provider for the namespace. This attribute was added in vSphere API 7.0.1.0.

  • ha_proxy_info (LoadBalancers.HAProxyInfo) – The LoadBalancers.HAProxyInfo is a conditional configuration made available upon selecting the HA_PROXY load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of provider is LoadBalancers.Provider.HA_PROXY.

  • avi_info (LoadBalancers.AviInfo) – The LoadBalancers.AviInfo is a conditional configuration made available upon selecting the AVI load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.2.0. This attribute is optional and it is only relevant when the value of provider is LoadBalancers.Provider.AVI.

class Provider(string)

Bases: vmware.vapi.bindings.enum.Enum

The LoadBalancers.Provider enumerates the kinds of load balancers supported by vSphere Namespaces. This enumeration was added in vSphere API 7.0.1.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Provider instance.

AVI = Provider(string='AVI')

NSX Advanced Load Balancer. This class attribute was added in vSphere API 7.0.2.0.

HA_PROXY = Provider(string='HA_PROXY')

HAProxy load balancer. This class attribute was added in vSphere API 7.0.1.0.

class Server(host=None, port=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

A LoadBalancers.Server represents an endpoint used to configure load balancers. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • host (str) – Load balancer hostname or IPv4 address. This attribute was added in vSphere API 7.0.1.0.

  • port (long) – Load balancer port. This attribute was added in vSphere API 7.0.1.0.

class SetSpec(address_ranges=None, provider=None, ha_proxy_config_set_spec=None, avi_config_set_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LoadBalancers.SetSpec encapsulates configuration allowed for setting a new configuration for a load balancer. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address_ranges (list of IPRange) – List of address ranges that will be used to derive frontend IP addresses for L4 virtual servers. This field is ignored in case of AVI load balancer provider. In case of HA_PROXY load balancer provider, at least one range must be provided. A set operation only allows for addition of new IP ranges to the existing list of IP ranges. This attribute was added in vSphere API 7.0.3.0.

  • provider (LoadBalancers.Provider) – The LoadBalancers.SetSpec.provider selects a provider from the list of available providers to be used with vSphere Namespaces. This attribute was added in vSphere API 7.0.3.0.

  • ha_proxy_config_set_spec (LoadBalancers.HAProxyConfigSetSpec) – The LoadBalancers.HAProxyConfigSetSpec is a conditional configuration made available upon selecting the HA_PROXY load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.3.0. This attribute is optional and it is only relevant when the value of provider is LoadBalancers.Provider.HA_PROXY.

  • avi_config_set_spec (LoadBalancers.AviConfigSetSpec) – The LoadBalancers.AviConfigSetSpec is a conditional configuration made available upon selecting the AVI load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.3.0. This attribute is optional and it is only relevant when the value of provider is LoadBalancers.Provider.AVI.

class Summary(id=None, provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LoadBalancers.Summary contains contains basic information related to the load balancer for provisioning virtual servers in the namespace. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – An DNS compliant identifier for a load balancer, which can be used to query or configure the load balancer properties. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig.

  • provider (LoadBalancers.Provider) – Load balancer provider for the namespace. This attribute was added in vSphere API 7.0.1.0.

class UpdateSpec(address_ranges=None, provider=None, ha_proxy_config_update_spec=None, avi_config_update_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LoadBalancers.UpdateSpec encapsulates configuration allowed for when updating configuration for load balancers. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address_ranges (list of IPRange or None) – List of address ranges that will be used to derive frontend IP addresses for L4 virtual servers. This field is ignored in case of AVI load balancer provider. In case of HA_PROXY load balancer provider, at least one range must be provided. An update operation only allows for addition of new IP ranges to the existing list of IP ranges. This attribute was added in vSphere API 7.0.3.0. If None, the existing list of address ranges will not be modified.

  • provider (LoadBalancers.Provider or None) – The LoadBalancers.UpdateSpec.provider selects a provider from the list of available providers to be used with vSphere Namespaces. This attribute was added in vSphere API 7.0.3.0. If set, corresponding load balancer UpdateSpec will be used to update the configuration. Note: This field cannot be updated and can only be used a qualifer for the provider specific update spec.

  • ha_proxy_config_update_spec (LoadBalancers.HAProxyConfigUpdateSpec or None) – The LoadBalancers.HAProxyConfigUpdateSpec is a conditional configuration made available upon selecting the HA_PROXY load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.3.0. If None, the HAProxy load balancer configuration will not be modified.

  • avi_config_update_spec (LoadBalancers.AviConfigUpdateSpec or None) – The LoadBalancers.AviConfigUpdateSpec is a conditional configuration made available upon selecting the AVI load balancer provider. It is used to configure the load balancer at run time. This attribute was added in vSphere API 7.0.3.0. If None, the Avi load balancer configuration will not be modified.

get(cluster, id)

Returns information LoadBalancers.Info about the load balancer associated with the given cluster. This method was added in vSphere API 7.0.1.0.

Parameters
  • cluster (str) – Identifier of the cluster the load balancer is associated with. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • id (str) – Identifier of the load balancer LoadBalancers.ConfigSpec.id. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig.

Return type

LoadBalancers.Info

Returns

Information about load balancer associated with a cluster.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or id cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster does not have vSphere Namespaces enabled.

list(cluster)

Returns information about all load balancers associated with the given cluster. This method was added in vSphere API 7.0.1.0.

Parameters

cluster (str) – Identifier of the cluster the load balancers are associated with. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

list of LoadBalancers.Summary

Returns

List of summary of all load balancers associated with a clusters.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster does not have vSphere Namespaces enabled.

set(cluster, id, spec)

Applies the entire load balancer spec to an existing load balancer configuration. This method was added in vSphere API 7.0.3.0.

Parameters
  • cluster (str) – Identifier of the cluster the load balancer is associated with. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • id (str) – Identifier of the load balancer. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig.

  • spec (LoadBalancers.SetSpec) – Information about the load balancer object to be set.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated cluster is being disabled or if the load balancer config is already marked for delete.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or id cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster does not have vSphere Namespaces enabled.

update(cluster, id, spec)

Updates the load balancer configuration. The specified configuration is applied partially and None fields in spec will leave those parts of configuration as-is. This method was added in vSphere API 7.0.3.0.

Parameters
  • cluster (str) – Identifier of the cluster the load balancer is associated with. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • id (str) – Identifier of the load balancer. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.LoadBalancerConfig.

  • spec (LoadBalancers.UpdateSpec) – Information about the load balancer object to be updated.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated cluster is being disabled or if the load balancer config is already marked for delete.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or id cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster does not have vSphere Namespaces enabled.

class com.vmware.vcenter.namespace_management_client.NSXTier0Gateway(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The NSXTier0Gateway provides methods to get information of NSX Tier0 Gateways. This class was added in vSphere API 7.0.2.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Summary(tier0_gateway=None, display_name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NSXTier0Gateway.Summary class contains information about an NSX-T Tier0 Gateway. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • tier0_gateway (str) – Identifier of the Tier0 Gateway. This attribute was added in vSphere API 7.0.2.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXTier0Gateway. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXTier0Gateway.

  • display_name (str) – Display name of the Tier0 Gateway. This attribute was added in vSphere API 7.0.2.0.

list(distributed_switch)

Returns information of NSX-T Tier0 Gateways associated with a Distributed Switch. This method was added in vSphere API 7.0.2.0.

Parameters

distributed_switch (str) – Identifier of a Distributed Switch. Only CVDS type of distributed switches is supported. Only Tier0 Gateways that are associated with the particular Distributed Switch will be listed. The parameter must be an identifier for the resource type: vSphereDistributedSwitch.

Return type

list of NSXTier0Gateway.Summary

Returns

List of summaries of Tier0 Gateways associated with the given Distributed Switch.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InternalServerError if the server reports an unknown internal error.

Raise

com.vmware.vapi.std.errors_client.NotFound if no existing Tier0 Gateways associated with the given Distributed Switch can be found.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management_client.NamespaceResourceOptions(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The NamespaceResourceOptions class provides methods to get the objects used to create and modify resource quotas on a namespace.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(create_resource_quota_type=None, update_resource_quota_type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceResourceOptions.Info class contains the information about the objects used to set and update resource quota keys on a namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • create_resource_quota_type (str) – Identifier of the class used to set resource quotas on the namespace. See com.vmware.vcenter.namespaces.Instances#create and com.vmware.vcenter.namespaces.Instances#set. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vapi.structure. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vapi.structure.

  • update_resource_quota_type (str) – Identifier of the class used to update resource quotas on the namespace. See com.vmware.vcenter.namespaces.Instances#update. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vapi.structure. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vapi.structure.

get(cluster)

Get the information about the objects used to set and update resource quota keys for version of Kubernetes running on {#link cluster}.

Parameters

cluster (str) – Identifier for the cluster hosting the namespace on which the resource quota needs to be set. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

NamespaceResourceOptions.Info

Returns

Information about the structures representing the resource spec.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster could not be located.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster is not enabled for Namespaces.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespace_management_client.Networks(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Networks class provides lifecycle methods on vSphere Namespaces networks associated with a vSphere cluster. This class was added in vSphere API 7.0.1.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(network=None, network_provider=None, vsphere_network=None, nsx_network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.CreateSpec class contains the specification required to create a vSphere Namespaces network object. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • network (str) – Identifier of the network. This has DNS_LABEL restrictions as specified in ` <https://tools.ietf.org/html/rfc1123>`_. This must be an alphanumeric (a-z and 0-9) string and with maximum length of 63 characters and with the ‘-‘ character allowed anywhere except the first or last character. This name must be unique within a cluster. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network.

  • network_provider (Clusters.NetworkProvider) – The network provider that will manage the vSphere Namespaces network object. This attribute was added in vSphere API 7.0.1.0.

  • vsphere_network (Networks.VsphereDVPGNetworkCreateSpec) – The create spec for a DVPG-backed Namespaces network object, supported by Clusters.NetworkProvider.VSPHERE_NETWORK network provider. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.VSPHERE_NETWORK.

  • nsx_network (Networks.NsxNetworkCreateSpec) – The create spec for a NSXT-backed Namespaces network configuration, supported by Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN network provider. This attribute was added in vSphere API 7.0.2.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN.

class IPAssignmentMode(string)

Bases: vmware.vapi.bindings.enum.Enum

The Networks.IPAssignmentMode class defines various IP address assignment modes. This enumeration was added in vSphere API 7.0.3.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the IPAssignmentMode instance.

DHCP = IPAssignmentMode(string='DHCP')

The address is automatically assigned by a DHCP server. This class attribute was added in vSphere API 7.0.3.0.

STATICRANGE = IPAssignmentMode(string='STATICRANGE')

The address is assigned from a static range. This class attribute was added in vSphere API 7.0.3.0.

class Info(network=None, network_provider=None, vsphere_network=None, nsx_network=None, namespaces=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.Info class contains detailed information about a specific vSphere Namespaces network. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • network (str) – Identifier of the network. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network.

  • network_provider (Clusters.NetworkProvider) – The network provider that will manage the vSphere Namespaces network object. This attribute was added in vSphere API 7.0.1.0.

  • vsphere_network (Networks.VsphereDVPGNetworkInfo) – Updated configuration specification for a DVPG-backed Namespaces network object, supported by Clusters.NetworkProvider.VSPHERE_NETWORK network provider. This attribute was added in vSphere API 7.0.1.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.VSPHERE_NETWORK.

  • nsx_network (Networks.NsxNetworkInfo) – Configuration specification for a NSXT-backed Namespaces network configuration, supported by Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN network provider. This attribute was added in vSphere API 7.0.2.0. This attribute is optional and it is only relevant when the value of networkProvider is Clusters.NetworkProvider.NSXT_CONTAINER_PLUGIN.

  • namespaces (list of str or None) – A list of Supervisor Namespaces associated with this network. This attribute was added in vSphere API 7.0.2.0. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespaces.Instance. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespaces.Instance. This attribute is optional because it was added in a newer version than its parent node.

class LoadBalancerSize(string)

Bases: vmware.vapi.bindings.enum.Enum

The Networks.LoadBalancerSize enumerates the kinds of load balancer sizes supported by NSX. Small load balancer can host 10 to 20 virtual servers depending on NSX-T version. Medium load balancer can host 100 virtual servers. Large load balancer can host 1000 virtual servers. This enumeration was added in vSphere API 7.0.2.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the LoadBalancerSize instance.

LARGE = LoadBalancerSize(string='LARGE')

Load balancer size of ‘large’. This class attribute was added in vSphere API 7.0.2.0.

MEDIUM = LoadBalancerSize(string='MEDIUM')

Load balancer size of ‘medium’. This class attribute was added in vSphere API 7.0.2.0.

SMALL = LoadBalancerSize(string='SMALL')

Load balancer size of ‘small’. This class attribute was added in vSphere API 7.0.2.0.

class NsxNetworkCreateSpec(namespace_network_cidrs=None, ingress_cidrs=None, egress_cidrs=None, nsx_tier0_gateway=None, subnet_prefix_length=None, routed_mode=None, load_balancer_size=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.NsxNetworkCreateSpec class describes the configuration specification of a NSXT-backed Namespaces Network configuration. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • namespace_network_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which Kubernetes allocates IP addresss for all workloads that attach to the namespace, including PodVMs, TKGS and VM Service VMs. This range should not overlap with those in Networks.NsxNetworkCreateSpec.ingress_cidrs, Networks.NsxNetworkCreateSpec.egress_cidrs, or other services running in the datacenter. This attribute was added in vSphere API 7.0.2.0. This field is required when Networks.NsxNetworkCreateSpec.nsx_tier0_gateway or any of Networks.NsxNetworkCreateSpec.ingress_cidrs, Networks.NsxNetworkCreateSpec.egress_cidrs are specified. An update operation only allows for addition of new CIDR blocks to the existing list.

  • ingress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. These ranges should not overlap with those in Networks.NsxNetworkCreateSpec.namespace_network_cidrs, Networks.NsxNetworkCreateSpec.egress_cidrs, or other services running in the datacenter. This attribute was added in vSphere API 7.0.2.0. This field is required when Networks.NsxNetworkCreateSpec.nsx_tier0_gateway or any of Networks.NsxNetworkCreateSpec.namespace_network_cidrs, Networks.NsxNetworkCreateSpec.egress_cidrs is specified. An update operation only allows for addition of new CIDR blocks to the existing list.

  • egress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. These ranges should not overlap with those in Networks.NsxNetworkCreateSpec.namespace_network_cidrs, Networks.NsxNetworkCreateSpec.ingress_cidrs, or other services running in the datacenter. This attribute was added in vSphere API 7.0.2.0. This field is required when Networks.NsxNetworkCreateSpec.routed_mode is set to False and Networks.NsxNetworkCreateSpec.nsx_tier0_gateway or any of Networks.NsxNetworkCreateSpec.namespace_network_cidrs, Networks.NsxNetworkCreateSpec.ingress_cidrs is specified. When Networks.NsxNetworkCreateSpec.routed_mode is set to True, this field is not allowed. An update operation only allows for addition of new CIDR blocks to the existing list.

  • nsx_tier0_gateway (str or None) – NSX Tier0 Gateway used for the namespace. This field does not allow update once applied. This attribute was added in vSphere API 7.0.2.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXTier0Gateway. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXTier0Gateway. This field is required when configuring a cluster that uses NSX-T.

  • subnet_prefix_length (long or None) – Size of the subnet reserved for namespace segments. This attribute was added in vSphere API 7.0.2.0. If None, defaults to 28. This field does not allow update once applied.

  • routed_mode (bool or None) – Routed mode for thw namespace. When set to True, the traffic in the namespace is not NATed. This attribute was added in vSphere API 7.0.2.0. If None, defaults to False. When this field is set to True, Networks.NsxNetworkCreateSpec.egress_cidrs is not allowed. This field does not allow update once applied.

  • load_balancer_size (Networks.LoadBalancerSize or None) – The size of the NSX Load Balancer used by the namespace. This field does not allow update once applied. This attribute was added in vSphere API 7.0.2.0. If None, defaults to Networks.LoadBalancerSize.SMALL.

class NsxNetworkInfo(namespace_network_cidrs=None, ingress_cidrs=None, egress_cidrs=None, nsx_tier0_gateway=None, subnet_prefix_length=None, routed_mode=None, load_balancer_size=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.NsxNetworkInfo class describes the configuration specification of a NSXT-backed Namespaces Network configuration. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • namespace_network_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which Kubernetes allocates IP addresses for all workloads that attach to the namespace, including PodVMs, TKGS and VM Service VMs. This attribute was added in vSphere API 7.0.2.0. If None, cluster level settings specified in Clusters.NCPClusterNetworkInfo.pod_cidrs will be applied.

  • ingress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. This attribute was added in vSphere API 7.0.2.0. If None, cluster level settings specified in Clusters.NCPClusterNetworkInfo.ingress_cidrs will be applied.

  • egress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. This attribute was added in vSphere API 7.0.2.0. If None, cluster level settings specified in Clusters.NCPClusterNetworkInfo.egress_cidrs will be applied.

  • nsx_tier0_gateway (str or None) – NSX Tier0 Gateway used for this namespace. This attribute was added in vSphere API 7.0.2.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXTier0Gateway. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXTier0Gateway. If None, cluster level settings specified in Clusters.NCPClusterNetworkInfo.nsx_tier0_gateway will be applied.

  • subnet_prefix_length (long or None) – Size of the subnet reserved for namespace segments. This attribute was added in vSphere API 7.0.2.0. If None, cluster level settings specified in Clusters.NCPClusterNetworkInfo.namespace_subnet_prefix will be applied.

  • routed_mode (bool or None) – Routed mode for this namespace. When set to True, the traffic in the namespace is not NATed. This attribute was added in vSphere API 7.0.2.0. If None, cluster level settings specified in Clusters.NCPClusterNetworkInfo.routed_mode will be applied.

  • load_balancer_size (Networks.LoadBalancerSize or None) – The size of the NSX Load Balancer used by the namespace. This attribute was added in vSphere API 7.0.2.0. If None, then Networks.LoadBalancerSize.SMALL is used.

class NsxNetworkSetSpec(namespace_network_cidrs=None, ingress_cidrs=None, egress_cidrs=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.NsxNetworkSetSpec class contains new configuration to set on an existing NSXT-backed Namespaces Network configuration. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • namespace_network_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which Kubernetes allocates IP addresses for all workloads that attach to the namespace, including PodVMs, TKGS and VM Service VMs. Only appending additional Cidr is allowed. Modification to existing Cidr ranges will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. Appending invalid Cidr e.g. overlapping or broadcast or reserved Cidr will result in the operation failing with a com.vmware.vapi.std.errors_client.InvalidArgument exception. This attribute was added in vSphere API 7.0.2.0. If None, the current value will be retained.

  • ingress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. Only appending additional Cidr is allowed. Modification to existing Cidr ranges will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. Appending invalid Cidr e.g. overlapping or broadcast or reserved Cidr will result in the operation failing with a com.vmware.vapi.std.errors_client.InvalidArgument exception. This attribute was added in vSphere API 7.0.2.0. If None, the current value will be retained.

  • egress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. Only appending additional Cidr is allowed. Modification to existing Cidr ranges will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. Appending invalid Cidr e.g. overlapping or broadcast or reserved Cidr will result in the operation failing with a com.vmware.vapi.std.errors_client.InvalidArgument exception. This attribute was added in vSphere API 7.0.2.0. If None, the current value will be retained.

class NsxNetworkUpdateSpec(namespace_network_cidrs=None, ingress_cidrs=None, egress_cidrs=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.NsxNetworkUpdateSpec class contains new configuration to update on an existing a NSXT-backed Namespaces Network configuration. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • namespace_network_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which Kubernetes allocates IP addresses for all workloads that attach to the namespace, including PodVMs, TKGS and VM Service VMs. Only appending additional Cidr is allowed. Modification to existing Cidr ranges will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. Appending invalid Cidr e.g. overlapping or broadcast or reserved Cidr will result in the operation failing with a com.vmware.vapi.std.errors_client.InvalidArgument exception. This attribute was added in vSphere API 7.0.2.0. If None, the current value will be retained.

  • ingress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. Only appending additional Cidr is allowed. Modification to existing Cidr ranges will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. Appending invalid Cidr e.g. overlapping or broadcast or reserved Cidr will result in the operation failing with a com.vmware.vapi.std.errors_client.InvalidArgument exception. This attribute was added in vSphere API 7.0.2.0. If None, the current value will be retained.

  • egress_cidrs (list of Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. Only appending additional Cidr is allowed. Modification to existing Cidr ranges will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. Appending invalid Cidr e.g. overlapping or broadcast or reserved Cidr will result in the operation failing with a com.vmware.vapi.std.errors_client.InvalidArgument exception. This attribute was added in vSphere API 7.0.2.0. If None, the current value will be retained.

RESOURCE_TYPE = 'com.vmware.vcenter.namespace_management.Network'

The resource type for network. This class attribute was added in vSphere API 7.0.1.0.

class SetSpec(network_provider=None, vsphere_network=None, nsx_network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.SetSpec class contains the specification required to set a new configuration of a vSphere Namespaces network object. This class is applied in entirety, replacing the current specification fully. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class UpdateSpec(network_provider=None, vsphere_network=None, nsx_network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.UpdateSpec class contains the specification required to update the configuration of a vSphere Namespaces network object. This class is applied partially, and only the specified fields will replace or modify their existing counterparts. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class VsphereDVPGNetworkCreateSpec(portgroup=None, ip_assignment_mode=None, address_ranges=None, gateway=None, subnet_mask=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.VsphereDVPGNetworkCreateSpec class describes the configuration specification of a vSphere DVPG-backed Namespaces Network object. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • portgroup (str) – Identifier of the vSphere Distributed Portgroup backing the vSphere network object. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network.

  • ip_assignment_mode (Networks.IPAssignmentMode or None) – IP address assignment mode. If set to DHCP, then field Networks.VsphereDVPGNetworkCreateSpec.address_ranges must be set to an empty list and fields Networks.VsphereDVPGNetworkCreateSpec.gateway and Networks.VsphereDVPGNetworkCreateSpec.subnet_mask must be set to empty strings. This attribute was added in vSphere API 7.0.3.0. If None, defaults to STATICRANGE.

  • address_ranges (list of IPRange) – Usable IP pools on this network. This attribute was added in vSphere API 7.0.1.0.

  • gateway (str) – Gateway for the network. This attribute was added in vSphere API 7.0.1.0.

  • subnet_mask (str) – Subnet mask of the network. This attribute was added in vSphere API 7.0.1.0.

class VsphereDVPGNetworkInfo(portgroup=None, ip_assignment_mode=None, address_ranges=None, gateway=None, subnet_mask=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.VsphereDVPGNetworkInfo class describes the configuration specification of a vSphere DVPG-backed Namespaces Network object. This class was added in vSphere API 7.0.1.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • portgroup (str) – Identifier of the vSphere Distributed Portgroup backing the vSphere network object. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network.

  • ip_assignment_mode (Networks.IPAssignmentMode or None) – IP address assignment mode. This attribute was added in vSphere API 7.0.3.0. This attribute is optional because it was added in a newer version than its parent node.

  • address_ranges (list of IPRange) – Usable IP pools on this network. This attribute was added in vSphere API 7.0.1.0.

  • gateway (str) – Gateway for the network. This attribute was added in vSphere API 7.0.1.0.

  • subnet_mask (str) – Subnet mask of the network. This attribute was added in vSphere API 7.0.1.0.

class VsphereDVPGNetworkSetSpec(portgroup=None, address_ranges=None, gateway=None, subnet_mask=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.VsphereDVPGNetworkSetSpec class contains new configuration to set on an existing a vSphere DVPG-backed Namespaces Network object. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • portgroup (str) – Identifier of the vSphere Distributed Portgroup backing the vSphere network object. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, modification to existing portgroup will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. This attribute was added in vSphere API 7.0.3.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network.

  • address_ranges (list of IPRange) – Usable IP pools on this network. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, then replacement of or modification to any existing range in this list will result in operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. To add new address ranges to the list, existing address ranges have to be passed in without modifications. This attribute was added in vSphere API 7.0.3.0.

  • gateway (str) – Gateway for the network. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, then modification to existing gateway will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. This attribute was added in vSphere API 7.0.3.0.

  • subnet_mask (str) – Subnet mask of the network. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, then modification to existing subnet mask will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. This attribute was added in vSphere API 7.0.3.0.

class VsphereDVPGNetworkUpdateSpec(portgroup=None, address_ranges=None, gateway=None, subnet_mask=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Networks.VsphereDVPGNetworkUpdateSpec class contains new configuration to update on an existing a vSphere DVPG-backed Namespaces Network object. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • portgroup (str or None) – Identifier of the vSphere Distributed Portgroup backing the vSphere network object. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, then modification to existing portgroup will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. This attribute was added in vSphere API 7.0.3.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network. If None, the current value will be retained.

  • address_ranges (list of IPRange or None) – Usable IP pools on this network. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, then replacement of or modification to any existing range in this list will result in operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. To add new address ranges to the list, existing address ranges have to be passed in without modifications. This attribute was added in vSphere API 7.0.3.0. If None, the current value will be retained.

  • gateway (str or None) – Gateway for the network. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, then modification to existing gateway will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. This attribute was added in vSphere API 7.0.3.0. If None, the current value will be retained.

  • subnet_mask (str or None) – Subnet mask of the network. If the network object is associated with a Namespace or is Clusters.WorkloadNetworksEnableSpec.supervisor_primary_workload_network, then modification to existing subnet mask will result in the operation failing with a com.vmware.vapi.std.errors_client.ResourceInUse exception. This attribute was added in vSphere API 7.0.3.0. If None, the current value will be retained.

create(cluster, spec)

Create a vSphere Namespaces network object associated with the given cluster. This method was added in vSphere API 7.0.3.0.

Parameters
  • cluster (str) – Identifier for the cluster. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (Networks.CreateSpec) – Information about the network object to be created.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a network by the name as specified in the Networks.CreateSpec already exists.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated cluster is being disabled.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unsupported if spec contains NsxNetworkCreateSpec which is unsupported via create API.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

delete(cluster, network)

Delete the vSphere Namespaces object in the cluster. This method was added in vSphere API 7.0.3.0.

Parameters
  • cluster (str) – Identifier for the cluster. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • network (str) – Identifier for the vSphere Namespaces network. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or network could not be located.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if the network is associated with a Namespace.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

get(cluster, network)

Return information about a specific vSphere Namespaces network. This method was added in vSphere API 7.0.1.0.

Parameters
  • cluster (str) – Identifier for the cluster. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • network (str) – Identifier for the vSphere Namespaces network. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network.

Return type

Networks.Info

Returns

List of information about all vSphere Namespaces networks in the cluster.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or network could not be located.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list(cluster)

Return information about all vSphere Namespaces networks in the cluster. This method was added in vSphere API 7.0.1.0.

Parameters

cluster (str) – Identifier for the cluster. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

list of Networks.Info

Returns

Information about the specified vSphere Namespaces network..

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or network could not be located.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

set(cluster, network, spec)

Set a new configuration for the vSphere Namespaces network object associated with the given cluster. This method was added in vSphere API 7.0.3.0.

Parameters
  • cluster (str) – Identifier for the cluster. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • network (str) – Identifier for the vSphere Namespaces network. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network.

  • spec (Networks.SetSpec) – Information about the network object to be set.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated cluster is being disabled.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or the network cannot be located.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if the network is in use and the spec contains field values that are un-settable in such a case.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

update(cluster, network, spec)

Update the configuration of the vSphere Namespaces network object associated with the given cluster. This method was added in vSphere API 7.0.3.0.

Parameters
  • cluster (str) – Identifier for the cluster. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • network (str) – Identifier for the vSphere Namespaces network. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.Network.

  • spec (Networks.UpdateSpec) – Information about the network object to be updated.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated cluster is being disabled.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster or the network cannot be located.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if the network is in use and the spec contains field values that are un-updatable in such a case.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

class com.vmware.vcenter.namespace_management_client.ProxyConfiguration(proxy_settings_source=None, https_proxy_config=None, http_proxy_config=None, no_proxy_config=None, tls_root_ca_bundle=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ProxyConfiguration class defines proxy configuration to be used by the Supervisor. This class was added in vSphere API 7.0.3.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • proxy_settings_source (ProxySettingsSource) – The source of the proxy settings. If ProxySettingsSource.VC_INHERITED or ProxySettingsSource.NONE is specified, then the other configuration in ProxyConfiguration will be ignored. This attribute was added in vSphere API 7.0.3.00100.

  • https_proxy_config (str or None) –

    HTTPS proxy configuration. Examples:

    This will be used if ProxySettingsSource.CLUSTER_CONFIGURED is used for the source, otherwise this will be ignored. This attribute was added in vSphere API 7.0.3.00100. If None no HTTPS proxy will be used.

  • http_proxy_config (str or None) –

    HTTP proxy configuration. Examples:

    This will be used if ProxySettingsSource.CLUSTER_CONFIGURED is used for the source, otherwise this will be ignored. This attribute was added in vSphere API 7.0.3.00100. If None no HTTP proxy will be used.

  • no_proxy_config (list of str or None) – List of addresses that should be accessed directly. This will be used if ProxySettingsSource.CLUSTER_CONFIGURED is used for the source, otherwise this will be ignored. This attribute was added in vSphere API 7.0.3.00100. If None there won’t be any excluded addresses.

  • tls_root_ca_bundle (str or None) – Proxy TLS root CA bundle which will be used to verify the proxy’s certificates. Every certificate in the bundle is expected to be in PEM format. This will be used if ProxySettingsSource.CLUSTER_CONFIGURED is used for the source, otherwise this will be ignored. This attribute was added in vSphere API 7.0.3.00100. If None only the vCenter certificates applied in VECS (VMware Endpoint Certificate Store) will be used.

class com.vmware.vcenter.namespace_management_client.ProxySettingsSource(string)

Bases: vmware.vapi.bindings.enum.Enum

The settings can be inherited from the vCenter settings, so the cluster settings will be synced. The settings can be applied directly on the cluster level, or the cluster can be configured not to use a proxy. This enumeration was added in vSphere API 7.0.3.00100.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ProxySettingsSource instance.

CLUSTER_CONFIGURED = ProxySettingsSource(string='CLUSTER_CONFIGURED')

Proxy settings will be configured at the cluster level. This class attribute was added in vSphere API 7.0.3.00100.

NONE = ProxySettingsSource(string='NONE')

No proxy settings will be applied to the cluster. This class attribute was added in vSphere API 7.0.3.00100.

VC_INHERITED = ProxySettingsSource(string='VC_INHERITED')

Proxy settings will be inherited from the vCenter settings. vCenter and cluster settings will be kept in sync. This class attribute was added in vSphere API 7.0.3.00100.

class com.vmware.vcenter.namespace_management_client.SizingHint(string)

Bases: vmware.vapi.bindings.enum.Enum

The SizingHint class determines the configuration of Kubernetes API server and the worker nodes. It also determines the default values associated with the maximum number of pods and services. Use ClusterSizeInfo.get() to get information associated with a SizingHint.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the SizingHint instance.

LARGE = SizingHint(string='LARGE')

Cluster size of ‘large’.

MEDIUM = SizingHint(string='MEDIUM')

Cluster size of ‘medium’.

SMALL = SizingHint(string='SMALL')

Cluster size of ‘small’.

TINY = SizingHint(string='TINY')

Cluster size of ‘tiny’.

class com.vmware.vcenter.namespace_management_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.namespace_management_client.SupervisorServices(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The SupervisorServices class provides methods to manage a Supervisor Service object. Supervisor services can be extensions to the vSphere Supervisor and provide services to applications running in vSphere Supervisor. They are often provided by 3rd party vendors. This class was added in vSphere API 7.0.3.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CarvelAppsCheckResult(supervisor_service=None, version=None, display_name=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.CarvelAppsCheckResult class contains the information of a Supervisor Service version that is retrieved from the content in Carvel application package format as a result of the SupervisorServices.check_content() method. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor_service (str) – The identifier of the Supervisor Service. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

  • version (str) – The identifier of the Supervisor Service version. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor_services.Version. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor_services.Version.

  • display_name (str) – A human readable name of the Supervisor Service version. This attribute was added in vSphere API 8.0.0.1.

  • description (str or None) – A human readable description of the Supervisor Service version. This attribute was added in vSphere API 8.0.0.1. If None, no description is available for the Supervisor Service version.

class CarvelCreateSpec(version_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.CarvelCreateSpec class provides a specification required to create a Supervisor Service with a version from Carvel application package format (Package and PackageMetadata resources should be declared). This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

version_spec (com.vmware.vcenter.namespace_management.supervisor_services_client.Versions.CarvelCreateSpec) – Supervisor service version specification that provides the service definitions for one Supervisor Service version. This attribute was added in vSphere API 8.0.0.1.

class CheckResult(status=None, content_type=None, vsphere_apps_check_result=None, carvel_apps_check_result=None, warning_messages=None, error_messages=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.CheckResult class defines the result of the validation checks on the content of a Supervisor Service version. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class ContentCheckSpec(content=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.ContentCheckSpec class provides a specification required for validation checks on the content of a Supervisor Service version. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

content (str or None) – The content of a Supervisor Service version, which shall be base64 encoded. This attribute was added in vSphere API 7.0.3.0. If None, the content shall be provided separately. In the current release, this field is required, otherwise InvalidArgument will be thrown.

class CreateSpec(custom_spec=None, vsphere_spec=None, carvel_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.CreateSpec class provides a specification required to create a Supervisor Service. Exactly one of SupervisorServices.CreateSpec.custom_spec or SupervisorServices.CreateSpec.vsphere_spec must be set. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • custom_spec (SupervisorServices.CustomCreateSpec or None) –

    The specification required to create a Supervisor Service with a version from inline content that is based on a plain Kubernetes YAML format.

    . This attribute was added in vSphere API 7.0.3.0. If set, the service will be created from a version based on a plain Kubernetes YAML format.

  • vsphere_spec (SupervisorServices.VsphereCreateSpec or None) –

    The specification required to create a Supervisor Service with a version from inline content that is based on the vSphere application service format.

    . This attribute was added in vSphere API 7.0.3.0. If set, the service will be created from a version based on the vSphere application service format.

  • carvel_spec (SupervisorServices.CarvelCreateSpec or None) –

    The specification required to create a Supervisor Service with a version from inline content that is based on the Carvel application package format.

    . This attribute was added in vSphere API 8.0.0.1. If set, the service will be created from a version based on the Carvel application package format (Package and PackageMetadata resources should be declared).

class CustomCreateSpec(supervisor_service=None, display_name=None, description=None, version_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.CustomCreateSpec class provides a specification required to create a Supervisor Service with a version from a plain Kubernetes YAML format. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor_service (str) – The identifier of the Supervisor Service. This has DNS_LABEL restrictions as specified in ` <https://tools.ietf.org/html/rfc1123>`_. This must be an alphanumeric (a-z and 0-9) string and with maximum length of 63 characters and with the ‘-‘ character allowed anywhere except the first or last character. This identifier must be unique across all Namespaces in this vCenter server. Additionally, the ID ‘namespaces’ is reserved and must not be used. This attribute was added in vSphere API 7.0.3.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

  • display_name (str) – A human readable name of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0.

  • description (str or None) – A human readable description of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0. If None, the Supervisor Service description will be empty.

  • version_spec (com.vmware.vcenter.namespace_management.supervisor_services_client.Versions.CustomCreateSpec) – Supervisor service version specification that provides the service definition for one Supervisor Service version. This attribute was added in vSphere API 7.0.3.0.

class Info(display_name=None, state=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.Info class contains detailed information about a Supervisor Service. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • display_name (str) – The human readable name of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0.

  • state (SupervisorServices.State) – The current SupervisorServices.State of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0.

  • description (str or None) – A human readable description of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0. If None, no description is available for the Supervisor Service.

class State(string)

Bases: vmware.vapi.bindings.enum.Enum

The SupervisorServices.State class defines the state of a Supervisor Service. This enumeration was added in vSphere API 7.0.3.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the State instance.

ACTIVATED = State(string='ACTIVATED')

The is the default state of a Supervisor Service upon creation. In this state, at least one version of the Supervisor Service is activated. This class attribute was added in vSphere API 7.0.3.0.

DEACTIVATED = State(string='DEACTIVATED')

The is the deactivated state of a Supervisor Service. In this state, all existing versions of the Supervisor Service will be deactivated, and cannot be activated. In addition to that, no new versions can be added to the Supervisor Service. This class attribute was added in vSphere API 7.0.3.0.

class Summary(supervisor_service=None, display_name=None, state=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.Summary class contains the basic information about a Supervisor Service version. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor_service (str) – The identifier of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

  • display_name (str) – The human readable name of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0.

  • state (SupervisorServices.State) – The current SupervisorServices.State of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0.

class UpdateSpec(display_name=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.UpdateSpec class provides a specification required to update a Supervisor Service. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • display_name (str or None) – A human readable name of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0. If None, the display name of the service will not be modified.

  • description (str or None) – A human readable description of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0. If None, the description of the service will not be modified.

class ValidationStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The SupervisorServices.ValidationStatus class defines the type of status for validating content of a Supervisor Service version. This enumeration was added in vSphere API 7.0.3.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ValidationStatus instance.

INVALID = ValidationStatus(string='INVALID')

Indicates the content is invalid for a Supervisor Service version, in which case the reasons can be found in errorMessages. This class attribute was added in vSphere API 7.0.3.0.

VALID = ValidationStatus(string='VALID')

Indicates the content is valid for a Supervisor Service version. This class attribute was added in vSphere API 7.0.3.0.

VALID_WITH_WARNINGS = ValidationStatus(string='VALID_WITH_WARNINGS')

Indicates the content is valid for a Supervisor Service version, but the content may contain information that should be reviewed closely and could prevent the Supervisor Service version to be created successfully later, which is explained in warningMessages. For example, the content may specify a Supervisor Service version that already exists on this vCenter. This class attribute was added in vSphere API 7.0.3.0.

class VsphereAppsCheckResult(supervisor_service=None, version=None, display_name=None, description=None, eula=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.VsphereAppsCheckResult class contains the information of a Supervisor Service version that is retrieved from the content in vSphere application service format as a result of the SupervisorServices.check_content() method. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor_service (str) – The identifier of the Supervisor Service. This attribute was added in vSphere API 7.0.3.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

  • version (str) – The identifier of the Supervisor Service version. This attribute was added in vSphere API 7.0.3.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor_services.Version. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor_services.Version.

  • display_name (str) – A human readable name of the Supervisor Service version. This attribute was added in vSphere API 7.0.3.0.

  • description (str or None) – A human readable description of the Supervisor Service version. This attribute was added in vSphere API 7.0.3.0. If None, no description is available for the Supervisor Service version.

  • eula (str or None) – The End User License Agreement (EULA) of the Supervisor Service version. This attribute was added in vSphere API 7.0.3.0. If None, no EULA is available for the Supervisor Service version.

class VsphereCreateSpec(version_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupervisorServices.VsphereCreateSpec class provides a specification required to create a Supervisor Service with a version from vSphere application service format, which shall contain the service identifier, display name and description information. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

version_spec (com.vmware.vcenter.namespace_management.supervisor_services_client.Versions.VsphereCreateSpec) – Supervisor service version specification that provides the service definitions for one Supervisor Service version. This attribute was added in vSphere API 7.0.3.0.

activate(supervisor_service)

Activate a Supervisor Service. This method will change the SupervisorServices.State of the supervisor service to in ACTIVATED state, and activate all versions of the supervisor service. This method was added in vSphere API 7.0.3.0.

Parameters

supervisor_service (str) – Identifier for the Supervisor Service. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the Supervisor Service is already in ACTIVATED state.

Raise

com.vmware.vapi.std.errors_client.NotFound if Supervisor Service with the ID supervisor_service could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have the SupervisorServices.Manage privilege.

check_content(spec)

Perform validation checks on the content of a Supervisor Service version defined in the spec. The method returns the validation status and relevant Supervisor Service version information that are available in the content. A custom format will always return a VALID status. Only vSphere and Carvel packages can return multiple validation statuses. This method was added in vSphere API 7.0.3.0.

Parameters

spec (SupervisorServices.ContentCheckSpec) – Specification for the content to be checked.

Return type

SupervisorServices.CheckResult

Returns

A check result containing validation status and relevant Supervisor Service version information from the provided content, if the content is valid. In case of invalid content, it will return a list of error messages.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the provided spec is invalid. For example, the provided SupervisorServices.ContentCheckSpec.content is empty or not base64 encoded.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have the System.Read privilege.

create(spec)

Create a Supervisor Service. If version specs are provided in the spec, new Supervisor Service versions will be created as part of the operation. This method was added in vSphere API 7.0.3.0.

Parameters

spec (SupervisorServices.CreateSpec) – Specification for the Supervisor Service with version definition.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a Supervisor Service with the same identifier already exists.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors or if an invalid name is specified. For example, when the service is from a trusted provider, but no signature is provided or it is invalid.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the SupervisorServices.Manage privilege.

deactivate(supervisor_service)

Deactivate a Supervisor Service. This method will change the SupervisorServices.State of the supervisor service to DEACTIVATED state, and deactivate all versions of the supervisor service. Note that this method should be called before deleting the Supervisor Service. This method was added in vSphere API 7.0.3.0.

Parameters

supervisor_service (str) – Identifier for the Supervisor Service. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the Supervisor Service is already in DEACTIVATED state.

Raise

com.vmware.vapi.std.errors_client.NotFound if Supervisor Service with the ID supervisor_service could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have the SupervisorServices.Manage privilege.

delete(supervisor_service)

Delete a Supervisor Service. This method only deletes the Supervisor Service from vCenter if the Supervisor Service is in DEACTIVATED state, and all versions of the Supervisor Service are removed from vCenter. Note that the deactivate method should be called to deactivate the Supervisor Service before the Supervisor Service can be deleted. This method was added in vSphere API 7.0.3.0.

Parameters

supervisor_service (str) – Identifier for the Supervisor Service. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the Supervisor Service cannot be deleted in the current state, e.g. a version of the Supervisor Service is not in DEACTIVATED state.

Raise

com.vmware.vapi.std.errors_client.NotFound if Supervisor Service with the ID supervisor_service could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the SupervisorServices.Manage privilege.

get(supervisor_service)

Return the information for the specified Supervisor Service. This method was added in vSphere API 7.0.3.0.

Parameters

supervisor_service (str) – Identifier for the Supervisor Service. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

Return type

SupervisorServices.Info

Returns

Information for the specified Supervisor Service.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if Supervisor Service with the ID supervisor_service could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the System.Read privilege.

list()

Return the information about all Supervisor Services on this vCenter. This method was added in vSphere API 7.0.3.0.

Return type

list of SupervisorServices.Summary

Returns

The list of summary of all Supervisor Services.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the System.Read privilege.

update(supervisor_service, spec)

Update a Supervisor Service. This method was added in vSphere API 7.0.3.0.

Parameters
  • supervisor_service (str) – Identifier for the Supervisor Service. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.SupervisorService.

  • spec (SupervisorServices.UpdateSpec) – Specification for the Supervisor Service metadata to be updated.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors or if an invalid name is specified.

Raise

com.vmware.vapi.std.errors_client.NotFound if Supervisor Service with the ID supervisor_service could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the SupervisorServices.Manage privilege.

class com.vmware.vcenter.namespace_management_client.Supervisors(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Supervisors service manages the lifecycle of the Supervisor. This interface replaces the Clusters service. This class was added in vSphere API 8.0.0.1.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class EnableOnComputeClusterSpec(zone=None, name=None, control_plane=None, workloads=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Supervisors.EnableOnComputeClusterSpec class contains the specification required to enable a Supervisor on a vSphere cluster.

The ability to add multiple workload networks at enablement has been deprecated. Please use the Networks APIs to add additional workload networks after the cluster has been enabled.. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • zone (str or None) – Supervisors.EnableOnComputeClusterSpec.zone describes consumption fault domain zone available to the Supervisor and its workloads. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.consumption_domains.Zone. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.consumption_domains.Zone. Zone will be created and associated with the cluster. If None, the zone name will be generated based on the cluster managed object ID. The zone can be managed with the zone api {\@link #com.vmware.vcenter.consumption-domains.Zones}

  • name (str) – A Supervisors.EnableSpec.name is a user-friendly identifier for this Supervisor. This attribute was added in vSphere API 8.0.0.1.

  • control_plane (com.vmware.vcenter.namespace_management.supervisors_client.ControlPlane) – Supervisors.EnableSpec.control_plane specifies configuration for the Supervisor control plane. This attribute was added in vSphere API 8.0.0.1.

  • workloads (com.vmware.vcenter.namespace_management.supervisors_client.Workloads) – Supervisors.EnableSpec.workloads specifies configuration for compute, network, and storage for workloads. This attribute was added in vSphere API 8.0.0.1.

class EnableOnZonesSpec(zones=None, name=None, control_plane=None, workloads=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Supervisors.EnableOnZonesSpec class contains the specification required to enable the Supervisor on a set of vSphere Zones.

The ability to add multiple workload networks at enablement has been deprecated. Please use the Networks APIs to add additional workload networks after the cluster has been enabled.. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • zones (list of str) – Supervisors.EnableOnZonesSpec.zones describe consumption fault domain zones available to the Supervisor and its workloads. Only one or three zones are supported. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.consumption_domains.Zone. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.consumption_domains.Zone.

  • name (str) – A Supervisors.EnableSpec.name is a user-friendly identifier for this Supervisor. This attribute was added in vSphere API 8.0.0.1.

  • control_plane (com.vmware.vcenter.namespace_management.supervisors_client.ControlPlane) – Supervisors.EnableSpec.control_plane specifies configuration for the Supervisor control plane. This attribute was added in vSphere API 8.0.0.1.

  • workloads (com.vmware.vcenter.namespace_management.supervisors_client.Workloads) – Supervisors.EnableSpec.workloads specifies configuration for compute, network, and storage for workloads. This attribute was added in vSphere API 8.0.0.1.

class EnableSpec(name=None, control_plane=None, workloads=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Supervisors.EnableSpec class contains the specification required to enable a Supervisor.

The ability to add multiple workload networks at enablement has been deprecated. Please use the Networks APIs to add additional workload networks after the cluster has been enabled.. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
enable_on_compute_cluster(cluster, spec)

Enable the Supervisor on a single vSphere cluster. This operation sets up the Kubernetes instance for the cluster along with worker nodes. A {\@link #com.vmware.vcenter.consumption-domains.Zones} zone will automatically be created if the specified cluster is not already associated with a vSphere Zone.

To verify if the Supervisor is compatible with this vSphere cluster use: ClusterCompatibility.list().

A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster.

To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors_client.Topology.get() to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API.. This method was added in vSphere API 8.0.0.1.

Parameters
  • cluster (str) – Identifier for the cluster used to enable the Supervisor Cluster. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (Supervisors.EnableOnComputeClusterSpec) – Specification for configuring the Supervisor and Workloads.

Return type

str

Returns

ID of the Supervisor object being enabled. The return value will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the cluster already has the Supervisor enabled.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if resources/objects could not be located.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if the specified cluster is not licensed.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified cluster is not supported for the Supervisor, the cluster’s hosts do not have the required ESX version, or for any other incompatibilities.

enable_on_zones(spec)

Enable a Supervisor on a set of vSphere Zones. The cluster control plane and its workloads will be eligible for placement across the zones. Enabling on multiple zones enables fault tolerance for applications deployed on more than one zone in case of a zone failure.

To verify if the Supervisor is compatible with the provided Zones use: ClusterCompatibility.list().. This method was added in vSphere API 8.0.0.1.

Parameters

spec (Supervisors.EnableOnZonesSpec) – Specification for configuring the Supervisor and Workloads.

Return type

str

Returns

ID of the Supervisor object being enabled. The return value will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if one or more zones already host a another Supervisor.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the provided zones could not be located.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if the one or more zones are not licensed.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Manage privilege.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the zones are not supported for the Supervisor, the zones’ hosts do not have the required ESX version, or for any other incompatibilities.

class com.vmware.vcenter.namespace_management_client.SupportBundle(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The SupportBundle class provides methods to retrieve the cluster’s Namespaces-related support bundle download location.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Location(url=None, wcp_support_bundle_token=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupportBundle.Location class contains the URI location to download the per-cluster support bundle from, as well as a token required (as a header on the HTTP request) to get the bundle. The validity of the token is 5 minutes. After the token expires, any attempt to call the URI with said token will fail.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • url (str) – Support Bundle Download URL.

  • wcp_support_bundle_token (SupportBundle.Token) – Information about the token required in the HTTP GET request to generate the support bundle.

class Token(token=None, expiry=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SupportBundle.Token class contains information about the token required in the HTTP GET request to generate the support bundle.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • token (str) – A one-time, short-lived token required in the HTTP header of the request to the url. This token needs to be passed in as a header with the name “wcp-support-bundle-token”.

  • expiry (str) – Expiry time of the token

create(cluster)

Returns the location SupportBundle.Location information for downloading the Namespaces-related support bundle for the specified cluster.

Retrieving a support bundle involves two steps:

  • Step 1: Invoke method to provision a token and a URI.

  • Step 2: Make an HTTP GET request using URI and one time used token returned in step 1 to generate the support bundle and return it.

There can only be one valid token per cluster at any given time. If this method is invoked again for the same cluster identifier while a token still valid, the API will return the same SupportBundle.Location response.

The HTTP GET request will:

  • return 401 (Not Authorized) if the download URL is recognized, but the token is invalid.

  • otherwise return 200 (OK), mark the token used (invalidating it for any future use), open a application/tar download stream for the client, and start the bundle process. As part of its work, the API will orchestrate support bundling on the worker nodes of a cluster. If a failure occurs during the collection of support bundle from worker node, the API will not abort the request, but will log a warning and move on to processing other worker nodes’ bundles. The API will only abort its operation if the content of the stream has been corrupted. When the API has to abort its operation (and the response stream), it will not provide any indication of failures to the client. The client will need to verify validity of the resultant file based on the format specified in the response’s Content-Disposition header.

Parameters

cluster (str) – Identifier of cluster for which the Namespaces-related support bundle should be generated. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

SupportBundle.Location

Returns

the download location of the support bundle for the cluster.

Raise

com.vmware.vapi.std.errors_client.NotFound if the specified cluster is not registered on this vCenter server.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Global.Diagnostics privilege.

class com.vmware.vcenter.namespace_management_client.VirtualMachineClasses(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The VirtualMachineClasses class provides management methods for customizable virtual machine classes. A virtual machine class represents a policy and configuration resource which defines a set of attributes to be used in the configuration of a virtual machine instance. This class was added in vSphere API 7.0.2.00100.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class ConfigStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

ConfigStatus represents the config status of the VM class. This enumeration was added in vSphere API 7.0.2.00100.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ConfigStatus instance.

READY = ConfigStatus(string='READY')

Indicates that the instance of the VirtualMachineClasses is ready to be used. This class attribute was added in vSphere API 7.0.2.00100.

REMOVING = ConfigStatus(string='REMOVING')

Indicates that the instance of the VirtualMachineClasses is being deleted. At this state the VM class cannot be associated with new Namespace. This class attribute was added in vSphere API 7.0.2.00100.

class CreateSpec(id=None, cpu_count=None, cpu_reservation=None, memory_mb=None, memory_reservation=None, description=None, devices=None, instance_storage=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.CreateSpec class contains the specification required to create a VM class object. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – Identifier of the virtual machine class. This has DNS_LABEL restrictions as specified in ` <https://tools.ietf.org/html/rfc1123>`_. This must be an alphanumeric (a-z and 0-9) string and with maximum length of 63 characters and with the ‘-‘ character allowed anywhere except the first or last character. This name is unique in this vCenter server. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass.

  • cpu_count (long) – The number of CPUs configured for virtual machine of this class. This attribute was added in vSphere API 7.0.2.00100.

  • cpu_reservation (long or None) – The percentage of total available CPUs reserved for a virtual machine. We multiply this percentage by the minimum frequency amongst all the cluster nodes to get the CPU reservation that is specified to vSphere in MHz. This attribute was added in vSphere API 7.0.2.00100. If None, no CPU reservation is requested for the virtual machine.

  • memory_mb (long) – The amount of memory in MB configured for virtual machine of this class. This attribute was added in vSphere API 7.0.2.00100.

  • memory_reservation (long or None) – The percentage of available memory reserved for a virtual machine of this class. Memory reservation must be set to 100% for VM class with vGPU or Dynamic DirectPath I/O devices. This attribute was added in vSphere API 7.0.2.00100. If None, no memory reservation is requested for virtual machine.

  • description (str or None) – Description for the VM class. This attribute was added in vSphere API 7.0.2.00100. If None, no description is added to the VM class.

  • devices (VirtualMachineClasses.VirtualDevices or None) – Virtual devices that will be attached to the VMs created with this class. This attribute was added in vSphere API 7.0.3.0. If None, no Virtual device will be attached to the VMs created with this class.

  • instance_storage (VirtualMachineClasses.InstanceStorage or None) – Instance storage that will be attached to the VMs created with this class. This attribute was added in vSphere API 8.0.0.0. If None, instance storage specification will not be created.

class DynamicDirectPathIODevice(vendor_id=None, device_id=None, custom_label=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.DynamicDirectPathIODevice class contains the configuration corresponding to a Dynamic DirectPath I/O device. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • vendor_id (long) – The vendor ID of this device. This attribute was added in vSphere API 7.0.3.0.

  • device_id (long) – The device ID of this device. This attribute was added in vSphere API 7.0.3.0.

  • custom_label (str or None) – The custom label attached to this device. This attribute was added in vSphere API 7.0.3.0. If None, custom label is not used to identify the device.

class Info(id=None, cpu_count=None, cpu_reservation=None, memory_mb=None, memory_reservation=None, description=None, namespaces=None, vms=None, config_status=None, messages=None, devices=None, instance_storage=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.Info class contains detailed information about the virtual machine class. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – Identifier for the VM class. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass.

  • cpu_count (long) – The number of CPUs configured for virtual machine of this class. This attribute was added in vSphere API 7.0.2.00100.

  • cpu_reservation (long or None) – The percentage of total available CPUs reserved for a virtual machine. We multiply this percentage by the minimum frequency amongst all the cluster nodes to get the CPU reservation that is specified to vSphere in MHz. This attribute was added in vSphere API 7.0.2.00100. If None, no CPU reservation is requested for the virtual machine.

  • memory_mb (long) – The amount of memory in MB configured for virtual machine of this class. This attribute was added in vSphere API 7.0.2.00100.

  • memory_reservation (long or None) – The percentage of available memory reserved for a virtual machine of this class. This attribute was added in vSphere API 7.0.2.00100. If None, no memory reservation is requested for virtual machine.

  • description (str) – Description of the VM class. This attribute was added in vSphere API 7.0.2.00100.

  • namespaces (set of str) – Set of Namespaces associated with this VM class. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespaces.Instance. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespaces.Instance.

  • vms (set of str) – Set of virtual machines deployed for VM class. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: VirtualMachine. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: VirtualMachine.

  • config_status (VirtualMachineClasses.ConfigStatus) – Configstatus of VM class. This attribute was added in vSphere API 7.0.2.00100.

  • messages (list of VirtualMachineClasses.Message) – Current set of messages associated with the object. This attribute was added in vSphere API 7.0.2.00100.

  • devices (VirtualMachineClasses.VirtualDevices) – Virtual devices corresponding to the VM class. This attribute was added in vSphere API 7.0.3.0. This attribute is optional because it was added in a newer version than its parent node.

  • instance_storage (VirtualMachineClasses.InstanceStorage or None) – Instance storage associated with the VM class. This attribute was added in vSphere API 8.0.0.0. If None, no instance storage is present.

class InstanceStorage(policy=None, volumes=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.InstanceStorage class encapsulates information about storage policy and instance storage volumes. This class was added in vSphere API 8.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • policy (str) – Policy corresponding to the instance storage. To use VM class with instance storage, this policy should also be associated with Supervisor namespace. See com.vmware.vcenter.namespaces.Instances.StorageSpec. This attribute was added in vSphere API 8.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile.

  • volumes (list of VirtualMachineClasses.InstanceStorageVolume) – List of instance storage volumes. At least one volume is required when configuring a VM class with instance storage. This attribute was added in vSphere API 8.0.0.0.

class InstanceStorageVolume(size=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.InstanceStorageVolume class contains the specification required to configure instance storage for virtual machines. An admin can create VM classes with instance storage volumes and assign them to Supervisor namespaces for consumption. These VM classes can be used to create virtual machines that have instance storage volumes attached as disks. The generated instance volumes are placed on vSan direct datastores. This class was added in vSphere API 8.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

size (long) – The size of instance storage volume in mebibytes (MiB) available for the virtual machine of this class. This attribute was added in vSphere API 8.0.0.0.

class Message(severity=None, details=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.Message class contains the information about the object configuration. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class MessageSeverity(string)

Bases: vmware.vapi.bindings.enum.Enum

The VirtualMachineClasses.Message.MessageSeverity class represents the severity of the message. This enumeration was added in vSphere API 7.0.2.00100.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the MessageSeverity instance.

ERROR = MessageSeverity(string='ERROR')

Error message. This is accompanied by vCenter event and/or alarm. This class attribute was added in vSphere API 7.0.2.00100.

INFO = MessageSeverity(string='INFO')

Informational message. This may be accompanied by vCenter event. This class attribute was added in vSphere API 7.0.2.00100.

WARNING = MessageSeverity(string='WARNING')

Warning message. This may be accompanied by vCenter event. This class attribute was added in vSphere API 7.0.2.00100.

RESOURCE_TYPE = 'com.vmware.vcenter.namespace_management.VirtualMachineClass'

The resource type for VM class. This class attribute was added in vSphere API 7.0.2.00100.

class UpdateSpec(cpu_count=None, cpu_reservation=None, memory_mb=None, memory_reservation=None, description=None, devices=None, instance_storage=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.UpdateSpec class contains the specification required to update a VM class object. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cpu_count (long or None) – The number of CPUs configured for virtual machine of this class. This attribute was added in vSphere API 7.0.2.00100. If None the current value the will not be modified.

  • cpu_reservation (long or None) – The percentage of total available CPUs reserved for a virtual machine. We multiply this percentage by the minimum frequency amongst all the cluster nodes to get the CPU reservation that is specified to vSphere in MHz. This attribute was added in vSphere API 7.0.2.00100. If None, no CPU reservation is requested for the virtual machine.

  • memory_mb (long or None) – The amount of memory in MB configured for virtual machine of this class. This attribute was added in vSphere API 7.0.2.00100. If None the current value the will not be modified.

  • memory_reservation (long or None) – The percentage of available memory reserved for a virtual machine of this class. Memory reservation must be set to 100% for VM class with vGPU or Dynamic DirectPath I/O devices. This attribute was added in vSphere API 7.0.2.00100. If None, no memory reservation is requested for virtual machine.

  • description (str or None) – Description for the VM class. This attribute was added in vSphere API 7.0.2.00100. If None, description is not updated.

  • devices (VirtualMachineClasses.VirtualDevices or None) – Virtual devices corresponding to the VM class. This attribute was added in vSphere API 7.0.3.0. If None, virtual devices will not be updated.

  • instance_storage (VirtualMachineClasses.InstanceStorage or None) – Instance storage associated with the VM class. This attribute was added in vSphere API 8.0.0.0. If None, instance storage specification will not be updated.

class VGPUDevice(profile_name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.VGPUDevice class contains the configuration corresponding to a vGPU device. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

profile_name (str) – Profile name corresponding to the device. This attribute was added in vSphere API 7.0.3.0.

class VirtualDevices(vgpu_devices=None, dynamic_direct_path_io_devices=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VirtualMachineClasses.VirtualDevices class contains information about the virtual devices associated with a VM class. This class was added in vSphere API 7.0.3.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • vgpu_devices (list of VirtualMachineClasses.VGPUDevice or None) – List of vGPU devices. This attribute was added in vSphere API 7.0.3.0. If None, no vGPU devices are present.

  • dynamic_direct_path_io_devices (list of VirtualMachineClasses.DynamicDirectPathIODevice or None) – List of Dynamic DirectPath I/O devices. This attribute was added in vSphere API 7.0.3.0. If None, no Dynamic DirectPath I/O devices are present.

create(spec)

Create a VM class object. This method was added in vSphere API 7.0.2.00100.

Parameters

spec (VirtualMachineClasses.CreateSpec) – Information about the VM class object to be created.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a VM class by the name as specified in the spec already exists in the vCenter inventory.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the input {\@param.spec.instanceStorage.policy} refers to an invalid storage policy or if the input spec includes settings that are out of acceptable bounds or a combination of settings that are not internally consistent with the input spec.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have VirtualMachineClasses.Manage privilege.

delete(vm_class)

Delete the VM class object. This method was added in vSphere API 7.0.2.00100.

Parameters

vm_class (str) – Identifier for the VM class. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse - TBD

Raise

com.vmware.vapi.std.errors_client.NotFound VM class could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have VirtualMachineClasses.Manage privilege.

get(vm_class)

Return information about a VM class. This method was added in vSphere API 7.0.2.00100.

Parameters

vm_class (str) – Identifier for the VM class. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass.

Return type

VirtualMachineClasses.Info

Returns

Information about the specified VM class.

Raise

com.vmware.vapi.std.errors_client.NotFound if VM class can not be found in the vCenter inventory.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list()

Return information about all VirtualMachine classes. This method was added in vSphere API 7.0.2.00100.

Return type

list of VirtualMachineClasses.Info

Returns

List of information about all VirtualMachine classes

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

update(vm_class, spec)

Update the configuration of the VM class object. This method was added in vSphere API 7.0.2.00100.

Parameters
  • vm_class (str) – Identifier for the VM class. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass.

  • spec (VirtualMachineClasses.UpdateSpec) – Information about the VM class object to be updated.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a VM class by the name as specified in the spec already exists in the vCenter inventory.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the input {\@param.spec.instanceStorage.policy} refers to an invalid storage policy or if the input spec includes settings that are out of acceptable bounds or a combination of settings that are not internally consistent with the input spec.

Raise

com.vmware.vapi.std.errors_client.NotFound if or the vm_class cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have VirtualMachineClasses.Manage privilege.

class com.vmware.vcenter.namespace_management_client.WorkloadsStorageConfig(cloud_native_file_volume=None, ephemeral_storage_policy=None, image_storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

WorkloadsStorageConfig class describes how vSphere and Kubernetes will persist images and volumes to disk. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cloud_native_file_volume (CNSFileConfig or None) – WorkloadsStorageConfig.cloud_native_file_volume specifies the Cloud Native Storage file volume support on the Supervisor. This feature provides ReadWriteMany container volumes support. This attribute was added in vSphere API 8.0.0.1. If None, file volume support will not be enabled on the Supervisor.

  • ephemeral_storage_policy (str or None) – WorkloadsStorageConfig.ephemeral_storage_policy identifies the storage policy associated with ephemeral disks of all the Kubernetes PodVMs in the cluster. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile. If None during cluster enablement, the ephemeral storage policy will be defaulted to the configured com.vmware.vcenter.namespace_management.supervisors_client.ControlPlane.storage_policy.

  • image_storage_policy (str or None) – The WorkloadsStorageConfig.image_storage_policy class contains the specification required to configure storage used for PodVM container images. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile. If None, the image storage policy will be set to the specified WorkloadsStorageConfig.ephemeral_storage_policy if provided. This field will inherit any defaults for ephemeral storage policy set by the system.

com.vmware.vcenter.namespaces_client module

The com.vmware.vcenter.namespaces_client module provides classes for managing namespaces related methods.

class com.vmware.vcenter.namespaces_client.Access(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Access class provides methods to manage access control of subjects on namespaces.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(role=None, identity_provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Access.CreateSpec class contains the specification required to create access control on the namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • role (Access.Role) – Role to be assigned.

  • identity_provider (str or None) – UUID of an external identity provider for the user, if any. Use this field if the user is coming from an external identity provider configured via the com.vmware.vcenter.namespace_management.supervisors.identity.Providers service. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. If unset, vCenter Single Sign-On will be used as the identity provider.

class Info(role=None, identity_provider=None, inherited=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Access.Info class contains the information about the access control of the subject on given domain on the namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • role (Access.Role) – Role of the subject on the namespace.

  • identity_provider (str or None) – UUID of an external identity provider for the user, if any. Use this field if the user is coming from an external identity provider configured via the com.vmware.vcenter.namespace_management.supervisors.identity.Providers service. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. If unset, vCenter Single Sign-On will be used as the identity provider.

  • inherited (bool) – Flag to indicate if the Access.Info.role is direct or inherited. The value is set to true if the Access.Info.role is inherited from group membership. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

class Role(string)

Bases: vmware.vapi.bindings.enum.Enum

The Access.Role class lists the default roles which can be associated with a subject on a domain on the namespace.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Role instance.

EDIT = Role(string='EDIT')

This role allows modification of the namespace.

OWNER = Role(string='OWNER')

This role allows modification and deletion of the namespace. This class attribute was added in vSphere API 7.0.2.00100.

VIEW = Role(string='VIEW')

This is a read-only role on the namespace.

class SetSpec(role=None, identity_provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Access.SetSpec class contains the specification required to set new access control on the namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • role (Access.Role) – Role to be assigned.

  • identity_provider (str or None) – UUID of an external identity provider for the user, if any. Use this field if the user is coming from an external identity provider configured via the com.vmware.vcenter.namespace_management.supervisors.identity.Providers service. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. If unset, vCenter Single Sign-On will be used as the identity provider.

class SubjectType(string)

Bases: vmware.vapi.bindings.enum.Enum

The Access.SubjectType class lists the types of subjects who can be associated with a Access.Role on the namespace.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the SubjectType instance.

GROUP = SubjectType(string='GROUP')

Group of users.

USER = SubjectType(string='USER')

Single user.

create(namespace, domain, subject, type, spec)

Set up access control for the subject on given domain on the namespace.

Parameters
  • namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • domain (str) – The domain of the subject.

  • subject (str) – The principal for this operation.

  • type (Access.SubjectType) – The type of subject (USER or GROUP).

  • spec (Access.CreateSpec) – Information about the access control to be created.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the specified principal on given domain is already associated with a role on the namespace.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the namespace is marked for deletion or the associated cluster is being disabled.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace cannot be located.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors or if an invalid type is specified.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

delete(namespace, domain, subject, type)

Remove access control of the subject on given domain from the namespace.

Parameters
  • namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • domain (str) – The domain of the subject.

  • subject (str) – The principal for this operation.

  • type (Access.SubjectType) – The type of subject (USER or GROUP).

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the namespace is marked for deletion or the associated cluster is being disabled.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified principal on given domain is not associated with the namespace.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

get(namespace, domain, subject, type)

Get the information about the access control of the subject on given domain on the namespace.

Parameters
  • namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • domain (str) – The domain of the subject.

  • subject (str) – The principal for this operation.

  • type (Access.SubjectType) – The type of subject (USER or GROUP).

Return type

Access.Info

Returns

Information about the subject including the type and the role on the namespace.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified principal on given domain is not associated with the namespace.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

set(namespace, domain, subject, type, spec)

Set new access control on the namespace for the subject on given domain.

Parameters
  • namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • domain (str) – The domain of the subject.

  • subject (str) – The principal for this operation.

  • type (Access.SubjectType) – The type of subject (USER or GROUP).

  • spec (Access.SetSpec) – Information about the new access control to be assigned.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the namespace is marked for deletion or the associated cluster is being disabled.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace cannot be located.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the specified principal on given domain is not associated with the namespace.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors or if an invalid type is specified.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

class com.vmware.vcenter.namespaces_client.Instances(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Instances class provides methods to create and delete a namespace object. In this version, an Instance is an abstraction around a Kubernetes namespace.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Access(subject_type=None, subject=None, domain=None, role=None, identity_provider=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.Access class contains the access control information for a subject on a namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • subject_type (Access.SubjectType) – Type of the subject.

  • subject (str) – Name of the subject.

  • domain (str) – Domain of the subject.

  • role (Access.Role) – Role of the subject on the namespace instance.

  • identity_provider (str or None) – UUID of an external identity provider for the user, if any. Use this field if the user is coming from an external identity provider configured via the com.vmware.vcenter.namespace_management.supervisors.identity.Providers service. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.identity.Provider. If unset, vCenter Single Sign-On will be used as the identity provider.

class ConfigStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The Instances.ConfigStatus class describes the status of reaching the desired state configuration for the namespace.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ConfigStatus instance.

CONFIGURING = ConfigStatus(string='CONFIGURING')

The configuration is being applied to the namespace.

ERROR = ConfigStatus(string='ERROR')

Failed to apply the configuration to the namespace, user intervention needed.

REMOVING = ConfigStatus(string='REMOVING')

The configuration is being removed and namespace is being deleted.

RUNNING = ConfigStatus(string='RUNNING')

The namespace is configured correctly.

class CreateSpec(cluster=None, namespace=None, description=None, resource_spec=None, access_list=None, storage_specs=None, networks=None, vm_service_spec=None, creator=None, namespace_network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.CreateSpec class contains the specification required to set up a namespace on a single vSphere cluster.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier of the cluster on which the namespace is being created. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • namespace (str) – Identifier of the namespace. This has DNS_LABEL restrictions as specified in ` <https://tools.ietf.org/html/rfc1123>`_. This must be an alphanumeric (a-z and 0-9) string and with maximum length of 63 characters and with the ‘-‘ character allowed anywhere except the first or last character. This name is unique across all Namespaces in this vCenter server. In this version, this maps to the name of a Kubernetes namespace. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • description (str or None) – Description for the namespace. If None, no description is added to the namespace.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Resource quota on the namespace. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions.Info#createResourceQuotaType and use com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for retrieving the type for the value for this field. For an example of this, see ResourceQuotaOptionsV1. If None, no resource limits will be set on the namespace.

  • access_list (list of Instances.Access or None) – Access controls associated with the namespace. If None, only users with Administrator role can access the namespace.

  • storage_specs (list of Instances.StorageSpec or None) – Storage associated with the namespace. If None, storage policies will not be associated with the namespace which will prevent users from being able to provision pods with persistent storage on the namespace. Users will be able to provision pods which use local storage.

  • networks (list of str or None) – vSphere Namespaces network objects to be associated with the namespace. The values of this list need to reference names of pre-existing com.vmware.vcenter.namespace_management.Networks.Info classs. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. The field must be left None if the cluster hosting the namespace uses NSXT_CONTAINER_PLUGIN as the network provider, since the network(s) for this namespace will be managed by NSX-T Container Plugin. If field is None when the cluster hosting the namespace uses VSPHERE_NETWORK as its network provider, the namespace will automatically be associated with the cluster’s Supervisor Primary Workload Network. The field currently accepts at most only 1 vSphere Namespaces network object reference.

  • vm_service_spec (Instances.VMServiceSpec or None) – VM Service specification associated with the namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • creator (Instances.Principal or None) – Creator of the namespace. Namespace self-service uses this field to populate the user who created this namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • namespace_network (Instances.NetworkCreateSpec or None) – This field that accepts parameters to define a vSphere Namespace Network object that will automatically be associated with this Namespace. Networks created in this operation will be given an autogenerated ID and cannot be referenced by other Namespaces. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

class CreateSpecV2(supervisor=None, namespace=None, description=None, resource_spec=None, access_list=None, storage_specs=None, networks=None, vm_service_spec=None, creator=None, namespace_network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.CreateSpecV2 class contains the specification required to set up a namespace on a Supervisor cluster. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor (str) – Identifier for the sSupervisor hosting the namespace. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • namespace (str) – Identifier of the namespace. This has DNS_LABEL restrictions as specified in ` <https://tools.ietf.org/html/rfc1123>`_. This must be an alphanumeric (a-z and 0-9) string and with maximum length of 63 characters and with the ‘-‘ character allowed anywhere except the first or last character. This name is unique across all Namespaces in this vCenter server. In this version, this maps to the name of a Kubernetes namespace. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • description (str or None) – Description for the namespace. If None, no description is added to the namespace.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Resource quota on the namespace. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions.Info#createResourceQuotaType and use com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for retrieving the type for the value for this field. For an example of this, see ResourceQuotaOptionsV1. If None, no resource limits will be set on the namespace.

  • access_list (list of Instances.Access or None) – Access controls associated with the namespace. If None, only users with Administrator role can access the namespace.

  • storage_specs (list of Instances.StorageSpec or None) – Storage associated with the namespace. If None, storage policies will not be associated with the namespace which will prevent users from being able to provision pods with persistent storage on the namespace. Users will be able to provision pods which use local storage.

  • networks (list of str or None) – vSphere Namespaces network objects to be associated with the namespace. The values of this list need to reference names of pre-existing com.vmware.vcenter.namespace_management.Networks.Info classs. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. The field must be left None if the cluster hosting the namespace uses NSXT_CONTAINER_PLUGIN as the network provider, since the network(s) for this namespace will be managed by NSX-T Container Plugin. If field is None when the cluster hosting the namespace uses VSPHERE_NETWORK as its network provider, the namespace will automatically be associated with the cluster’s Supervisor Primary Workload Network. The field currently accepts at most only 1 vSphere Namespaces network object reference.

  • vm_service_spec (Instances.VMServiceSpec or None) – VM Service specification associated with the namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • creator (Instances.Principal or None) – Creator of the namespace. Namespace self-service uses this field to populate the user who created this namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • namespace_network (Instances.NetworkCreateSpec or None) – This field that accepts parameters to define a vSphere Namespace Network object that will automatically be associated with this Namespace. Networks created in this operation will be given an autogenerated ID and cannot be referenced by other Namespaces. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

class Info(cluster=None, config_status=None, messages=None, stats=None, description=None, resource_spec=None, access_list=None, storage_specs=None, networks=None, vm_service_spec=None, creator=None, self_service_namespace=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.Info class contains the detailed information about the namespace on a single vSphere cluster.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier for the vSphere cluster hosting the namespace. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • config_status (Instances.ConfigStatus) – Current setting for Instances.ConfigStatus.

  • messages (list of Instances.Message) – Current set of messages associated with the object.

  • stats (Instances.Stats) – Basic runtime statistics for the namespace.

  • description (str) – Description of the namespace.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Quotas on the namespace resources. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for the type of the value for this field. If None, no resource constraints are associated with the namespace.

  • access_list (list of Instances.Access) – Access controls associated with the namespace.

  • storage_specs (list of Instances.StorageSpec) – Storage associated with the namespace.

  • networks (list of str or None) – vSphere Networks associated with the namespace. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. This field is None if the cluster hosting this namespace uses NSXT_CONTAINER_PLUGIN as its network provider.

  • vm_service_spec (Instances.VMServiceSpec) – VM Service specification associated with the namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • creator (Instances.Principal or None) – Creator of the namespace. Namespace self-service uses this field to populate the user who created this namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • self_service_namespace (bool or None) – Flag to indicate the self service namespace. This attribute was added in vSphere API 7.0.2.00100. If None, the namespace is not marked as self service namespace.

class InfoV2(supervisor=None, config_status=None, messages=None, stats=None, description=None, resource_spec=None, access_list=None, storage_specs=None, networks=None, vm_service_spec=None, creator=None, self_service_namespace=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.InfoV2 class contains the detailed information about the namespace on a Supervisor. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor (str) – Identifier for the Supervisor hosting the namespace. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • config_status (Instances.ConfigStatus) – Current setting for Instances.ConfigStatus.

  • messages (list of Instances.Message) – Current set of messages associated with the object.

  • stats (Instances.Stats) – Basic runtime statistics for the namespace.

  • description (str) – Description of the namespace.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Quotas on the namespace resources. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for the type of the value for this field. If None, no resource constraints are associated with the namespace.

  • access_list (list of Instances.Access) – Access controls associated with the namespace.

  • storage_specs (list of Instances.StorageSpec) – Storage associated with the namespace.

  • networks (list of str or None) – vSphere Networks associated with the namespace. This attribute was added in vSphere API 7.0.1.0. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. This field is None if the cluster hosting this namespace uses NSXT_CONTAINER_PLUGIN as its network provider.

  • vm_service_spec (Instances.VMServiceSpec) – VM Service specification associated with the namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • creator (Instances.Principal or None) – Creator of the namespace. Namespace self-service uses this field to populate the user who created this namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

  • self_service_namespace (bool or None) – Flag to indicate the self service namespace. This attribute was added in vSphere API 7.0.2.00100. If None, the namespace is not marked as self service namespace.

class Ipv4Cidr(address=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The specification for representing CIDR notation of IP range. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – The IPv4 address. This attribute was added in vSphere API 7.0.2.00100.

  • prefix (long) – The CIDR prefix. This attribute was added in vSphere API 7.0.2.00100.

class LoadBalancerSize(string)

Bases: vmware.vapi.bindings.enum.Enum

The Instances.LoadBalancerSize enumerates the kinds of load balancer sizes supported by NSX. Small load balancer can host 10 to 20 virtual servers depending on NSX-T version. Medium load balancer can host 100 virtual servers. Large load balancer can host 1000 virtual servers. This enumeration was added in vSphere API 7.0.2.00100.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the LoadBalancerSize instance.

LARGE = LoadBalancerSize(string='LARGE')

Load balancer size of ‘large’. This class attribute was added in vSphere API 7.0.2.00100.

MEDIUM = LoadBalancerSize(string='MEDIUM')

Load balancer size of ‘medium’. This class attribute was added in vSphere API 7.0.2.00100.

SMALL = LoadBalancerSize(string='SMALL')

Load balancer size of ‘small’. This class attribute was added in vSphere API 7.0.2.00100.

class Message(severity=None, details=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.Message class contains the information about the object configuration.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class MessageSeverity(string)

Bases: vmware.vapi.bindings.enum.Enum

The Instances.Message.MessageSeverity class represents the severity of the message.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the MessageSeverity instance.

ERROR = MessageSeverity(string='ERROR')

Error message. This is accompanied by vCenter event and/or alarm.

INFO = MessageSeverity(string='INFO')

Informational message. This may be accompanied by vCenter event.

WARNING = MessageSeverity(string='WARNING')

Warning message. This may be accompanied by vCenter event.

class NetworkCreateSpec(network_provider=None, network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.NetworkCreateSpec class contains the specification required to create a vSphere Namespaces network object. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class NetworkProvider(string)

Bases: vmware.vapi.bindings.enum.Enum

Identifies the network plugin that networking functionalities for this vSphere Namespace. This enumeration was added in vSphere API 7.0.2.00100.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the NetworkProvider instance.

NSXT_CONTAINER_PLUGIN = NetworkProvider(string='NSXT_CONTAINER_PLUGIN')

NSX-T Container Plugin. This class attribute was added in vSphere API 7.0.2.00100.

VSPHERE_NETWORK = NetworkProvider(string='VSPHERE_NETWORK')

vSphere Networking. This class attribute was added in vSphere API 7.0.2.00100.

class NsxNetworkCreateSpec(namespace_network_cidrs=None, ingress_cidrs=None, egress_cidrs=None, nsx_tier0_gateway=None, subnet_prefix_length=None, routed_mode=None, load_balancer_size=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.NsxNetworkCreateSpec class describes the configuration specification of a NSXT-backed Namespaces Network configuration. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • namespace_network_cidrs (list of Instances.Ipv4Cidr or None) – CIDR blocks from which Kubernetes allocates IP addresss for all workloads that attach to the namespace, including PodVMs, TKGS and VM Service VMs. This range should not overlap with those in Instances.NsxNetworkCreateSpec.ingress_cidrs, Instances.NsxNetworkCreateSpec.egress_cidrs, or other services running in the datacenter. This attribute was added in vSphere API 7.0.2.00100. This field is required when Instances.NsxNetworkCreateSpec.nsx_tier0_gateway or any of Instances.NsxNetworkCreateSpec.ingress_cidrs, Instances.NsxNetworkCreateSpec.egress_cidrs are specified. An update operation only allows for addition of new CIDR blocks to the existing list.

  • ingress_cidrs (list of Instances.Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. These ranges should not overlap with those in Instances.NsxNetworkCreateSpec.namespace_network_cidrs, Instances.NsxNetworkCreateSpec.egress_cidrs, or other services running in the datacenter. This attribute was added in vSphere API 7.0.2.00100. This field is required when Instances.NsxNetworkCreateSpec.nsx_tier0_gateway or any of Instances.NsxNetworkCreateSpec.namespace_network_cidrs, Instances.NsxNetworkCreateSpec.egress_cidrs are specified. An update operation only allows for addition of new CIDR blocks to the existing list.

  • egress_cidrs (list of Instances.Ipv4Cidr or None) – CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. These ranges should not overlap with those in Instances.NsxNetworkCreateSpec.namespace_network_cidrs, Instances.NsxNetworkCreateSpec.ingress_cidrs, or other services running in the datacenter. This attribute was added in vSphere API 7.0.2.00100. This field is required when Instances.NsxNetworkCreateSpec.routed_mode is set to False and Instances.NsxNetworkCreateSpec.nsx_tier0_gateway or any of Instances.NsxNetworkCreateSpec.namespace_network_cidrs, Instances.NsxNetworkCreateSpec.ingress_cidrs is specified. When Instances.NsxNetworkCreateSpec.routed_mode is set to True, this field is not allowed. An update operation only allows for addition of new CIDR blocks to the existing list.

  • nsx_tier0_gateway (str or None) – NSX Tier0 Gateway used for this namespace. This field does not allow update once applied. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: NSXTier0Gateway. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: NSXTier0Gateway. If None, cluster level settings specified in com.vmware.vcenter.namespace_management.Clusters.NCPClusterNetworkInfo#nsxTier0Gateway will be applied.

  • subnet_prefix_length (long or None) – Size of the subnet reserved for namespace segments. This attribute was added in vSphere API 7.0.2.00100. If None, cluster level settings specified in com.vmware.vcenter.namespace_management.Clusters.NCPClusterNetworkInfo#namespaceSubnetPrefix will be applied.

  • routed_mode (bool or None) – Routed mode for this namespace. When set to True, the traffic in the namespace is not NATed. This attribute was added in vSphere API 7.0.2.00100. If None, defaults to False. When this field is set to True, Instances.NsxNetworkCreateSpec.egress_cidrs is not allowed. This field does not allow update once applied.

  • load_balancer_size (Instances.LoadBalancerSize or None) – The size of the NSX Load Balancer used by the namespace. This field does not allow update once applied. This attribute was added in vSphere API 7.0.2.00100. If None, defaults to Instances.LoadBalancerSize.SMALL.

class Principal(subject=None, domain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.Principal class contains the information about the creator of namespace. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • subject (str) – Name of the subject. This attribute was added in vSphere API 7.0.2.00100.

  • domain (str) – Domain of the subject. This attribute was added in vSphere API 7.0.2.00100.

RESOURCE_TYPE = 'com.vmware.vcenter.namespaces.Instance'

The resource type for namespace.

class SetSpec(description=None, resource_spec=None, access_list=None, storage_specs=None, vm_service_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.SetSpec class contains the specification required to set a new configuration on the namespace. This class is applied in entirety, replacing the current specification fully.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • description (str or None) – Description for the namespace. If None, the description of the namespace will be cleared.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Resource quota for the namespace. This will replace the existing resource constraints on the namespace in entirety. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions.Info#createResourceQuotaType and use com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for retrieving the type for the value for this field. For an example of this, see ResourceQuotaOptionsV1. If None, the resource constraints on the namespace will be cleared.

  • access_list (list of Instances.Access or None) – Access control associated with the namespace. If None, the existing access controls on the namespace will be removed and users will not be able to access this namespace to create new pods. Existing pods from users will continue to run.

  • storage_specs (list of Instances.StorageSpec or None) – Storage associated with the namespace. If None, the existing storage policies will be disassociated with the namespace and existing limits will be cleared. Pods which are already using persistent storage from the earlier version of storage policies will be able to access them till the datastores are attached to the worker nodes.

  • vm_service_spec (Instances.VMServiceSpec or None) – VM Service specification associated with the namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

class Stats(cpu_used=None, memory_used=None, storage_used=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.Stats class contains the basic runtime statistics about the namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cpu_used (long) – Overall CPU usage of the namespace, in MHz. This is the sum of CPU usage across all pods in the Kubernetes namespace.

  • memory_used (long) – Overall memory usage of the namespace (in mebibytes). This is the sum of memory usage across all pods.

  • storage_used (long) – Overall storage used by the namespace (in mebibytes). This is the sum of storage used by pods across all datastores in the cluster associated with storage policies configured for the namespace.

class StorageSpec(policy=None, limit=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.StorageSpec class contains the specification required to configure storage associated with a namespace. Information in this class will result in storage quotas on the Kubernetes namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • policy (str) – ID of the storage policy. A Kubernetes storage class is created for this storage policy if it does not exist already. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: SpsStorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: SpsStorageProfile.

  • limit (long or None) – The maximum amount of storage (in mebibytes) which can be utilized by the namespace for this specification. If None, no limits are placed.

class Summary(cluster=None, namespace=None, description=None, config_status=None, stats=None, self_service_namespace=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.Summary class contains the basic information about the namespace on a single vSphere cluster.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier for the vSphere cluster hosting the namespace. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • namespace (str) – Identifier of the namespace. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • description (str) – Description of the namespace.

  • config_status (Instances.ConfigStatus) – Current setting for Instances.ConfigStatus.

  • stats (Instances.Stats) – Basic runtime statistics for the namespace.

  • self_service_namespace (bool or None) – Flag to indicate the self service namespace. This attribute was added in vSphere API 7.0.2.00100. If None, the namespace is not marked as self service namespace.

class SummaryV2(supervisor=None, namespace=None, description=None, config_status=None, stats=None, self_service_namespace=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.SummaryV2 class contains the basic information about the namespace on a Supervisor. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor (str) – Identifier for the Supervisor hosting the namespace. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • namespace (str) – Identifier of the namespace. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • description (str) – Description of the namespace.

  • config_status (Instances.ConfigStatus) – Current setting for Instances.ConfigStatus.

  • stats (Instances.Stats) – Basic runtime statistics for the namespace.

  • self_service_namespace (bool or None) – Flag to indicate the self service namespace. This attribute was added in vSphere API 7.0.2.00100. If None, the namespace is not marked as self service namespace.

class UpdateSpec(description=None, resource_spec=None, access_list=None, storage_specs=None, vm_service_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.UpdateSpec class contains the specification required to update the configuration on the namespace. This class is applied partially, and only the specified fields will replace or modify their existing counterparts.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • description (str or None) – Description for the namespace. If None, the description of the namespace will not be modified.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Resource quota updates on the namespace. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions.Info#updateResourceQuotaType and use com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for retrieving the type for the value for this field. For an example of this, see ResourceQuotaOptionsV1Update. If None, the resource constraints on the namespace will not be modified.

  • access_list (list of Instances.Access or None) – Access control associated with the namespace. If None, access controls on the namespace will not be modified. Existing pods from users will continue to run.

  • storage_specs (list of Instances.StorageSpec or None) – Storage associated with the namespace. If None, storage policies and their limit will not be modified. Pods which are already using persistent storage from the earlier version of storage policies will be able to access them till the datastores are attached to the worker nodes.

  • vm_service_spec (Instances.VMServiceSpec or None) – VM Service specification associated with the namespace. This attribute was added in vSphere API 7.0.2.00100. This attribute is optional because it was added in a newer version than its parent node.

class VMServiceSpec(content_libraries=None, vm_classes=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Instances.VMServiceSpec class contains the specification required to configure the VM Service specification associated with a namespace.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • content_libraries (set of str or None) – Set of content libraries for use by the VM Service. The content libraries specified should exist in vSphere inventory. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.content.Library. This attribute is optional because it was added in a newer version than its parent node.

  • vm_classes (set of str or None) –

    Set of VirtualMachineClasses for use by the VM Service. The class names specified here should exist in vSphere inventory. If this field is empty in an updated specification, all VirtualMachineClasses that are currently associated with the namespace will be disassociated from it.

    NOTE: Any change in virtual machine classes associated with the namespace will not impact existing VMs.. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.VirtualMachineClass. This attribute is optional because it was added in a newer version than its parent node.

create(spec)

Create a namespace object on a single vSphere cluster.

Parameters

spec (Instances.CreateSpec) – The specification for setting up the namespace.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a namespace with the same name exists in vCenter server.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors or if an invalid name is specified.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated Supervisor cluster is being disabled or if the associated Supervisor cluster is being restored from a backup. When a Supervisor cluster is restored, there’s a window of time during which the restored Supervisor cluster’s state is being synchronized back to vCenter. During that time, namespace creation is not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if Instances.CreateSpec.cluster is not registered on this vCenter server.

Raise

com.vmware.vapi.std.errors_client.Unsupported if:attr:Instances.CreateSpec.cluster is not enabled for Namespaces, or if the networks field is set when the Instances.CreateSpec.cluster hosting the namespace uses NSXT_CONTAINER_PLUGIN as its network provider, or if the Supervisor cluster does not support customizable VM classes.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

create_v2(spec)

Create a namespace object on a Supervisor. This method was added in vSphere API 8.0.0.1.

Parameters

spec (Instances.CreateSpecV2) – The specification for setting up the namespace.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a namespace with the same name exists in vCenter server.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains any errors or if an invalid name is specified.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated Supervisor is being disabled or if the associated Supervisor is being restored from a backup. When a Supervisor is restored, there’s a window of time during which the restored Supervisor’s state is being synchronized back to vCenter. During that time, namespace creation is not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor is not registered on this vCenter server.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the Supervisor is not enabled for Namespaces, or if the networks field is set when the Supervisor hosting the namespace uses NSXT_CONTAINER_PLUGIN as its network provider, or if the Supervisor does not support customizable VM classes.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

delete(namespace)

Delete the namespace object in the cluster.

Parameters

namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the associated Supervisor cluster is being restored from a backup. When a Supervisor cluster is restored, there’s a window of time during which the restored Supervisor cluster’s state is being synchronized back to vCenter. During that time, namespace deletion is not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if the specified namespace could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

get(namespace)

Returns information about a specific namespace on a single vSphere cluster.

Parameters

namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

Return type

Instances.Info

Returns

Information about the desired state of the specified namespace.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace could not be located.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

get_v2(namespace)

Returns information about a specific namespace on a Supervisor. This method was added in vSphere API 8.0.0.1.

Parameters

namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

Return type

Instances.InfoV2

Returns

Information about the desired state of the specified namespace on a Supervisor.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace could not be located.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list()

Returns the information about all namespaces in this vCenter Server. The information is tied to a single vSphere cluster.

Return type

list of Instances.Summary

Returns

Information about all namespaces in this vCenter server.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list_v2()

Returns the information about all namespaces in this vCenter Server. The information is tied to a Supervisor. This method was added in vSphere API 8.0.0.1.

Return type

list of Instances.SummaryV2

Returns

Information about all namespaces in this vCenter server.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

set(namespace, spec)

Set a new configuration on the namespace object. The specified configuration is applied in entirety and will replace the current configuration fully.

Parameters
  • namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • spec (Instances.SetSpec) – New specification for the namespace.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the namespace is marked for deletion or if the associated Supervisor cluster is being disabled or if the associated Supervisor cluster is being restored from a backup. When a Supervisor cluster is restored, there’s a window of time during which the restored Supervisor cluster’s state is being synchronized back to vCenter. During that time, namespace configuration modifications are not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace with the name namespace could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

Raise

com.vmware.vapi.std.errors_client.Unsupported if customizable VM classes are not suported for this Supervisor cluster.

update(namespace, spec)

Update the namespace object. The specified configuration is applied partially and None fields in spec will leave those parts of configuration as-is.

Parameters
  • namespace (str) – Identifier for the namespace. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.Instance.

  • spec (Instances.UpdateSpec) – Specification for updating the namespace.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the namespace is marked for deletion or if the associated Supervisor cluster is being disabled or if the associated Supervisor cluster is being restored from a backup. When a Supervisor cluster is restored, there’s a window of time during which the restored Supervisor cluster’s state is being synchronized back to vCenter. During that time, namespace configuration modifications are not allowed.

Raise

com.vmware.vapi.std.errors_client.NotFound if namespace with the name namespace could not be located.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.Configure privilege or the namespace identifier begins with “vmware-system” prefix.

Raise

com.vmware.vapi.std.errors_client.Unsupported if customizable VM classes are not suported for this Supervisor cluster.

class com.vmware.vcenter.namespaces_client.NamespaceSelfService(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The NamespaceSelfService class provides methods to activate and deactivate a namespace template that empowers users as self-service namespace users. If the service is activated on a cluster, users can create Supervisor Namespaces through kubectl create namespace command without the need of extra assistance. This class was added in vSphere API 7.0.2.00100.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class ActivateTemplateSpec(template=None, permissions=None, resource_spec=None, storage_specs=None, networks=None, vm_service_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceSelfService.ActivateTemplateSpec class contains the specification required to create or update namespace template. The create or update template operations are combined with service activation in a single operation. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • template (str) – Identifier of the namespace template that is being activated. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

  • permissions (list of NamespaceTemplates.Subject) – Namespace Self Service permission to subjects. This attribute was added in vSphere API 7.0.2.00100.

  • resource_spec (vmware.vapi.struct.VapiStruct) – Resource quotas that the template defines. Resource quota on the namespace. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions.Info#createResourceQuotaType and use com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for retrieving the type for the value for this field. For an example of this, see ResourceQuotaOptionsV1. This attribute was added in vSphere API 7.0.2.00100.

  • storage_specs (list of Instances.StorageSpec) – Storage associated with the self service namespace. This attribute was added in vSphere API 7.0.2.00100.

  • networks (list of str or None) – vSphere Namespaces network objects to be associated with the namespace. The values of this list need to reference names of pre-existing com.vmware.vcenter.namespace_management.Networks.Info classs. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: ClusterComputeResource. The field must be left None if the cluster hosting the namespace uses NSXT_CONTAINER_PLUGIN as the network provider, since the network(s) for this namespace will be managed by NSX-T Container Plugin. If field is None when the cluster hosting the namespace uses VSPHERE_NETWORK as its network provider, the namespace will automatically be associated with the cluster’s Supervisor Primary Workload Network. The field currently accepts at most only 1 vSphere Namespaces network object reference.

  • vm_service_spec (Instances.VMServiceSpec or None) – VM Service specification to be associated with the namespace template. Namespaces created using this template will have access to the virtual machine classes and Content Libraries specified in the NamespaceSelfService.ActivateTemplateSpec.vm_service_spec by default. This attribute was added in vSphere API 7.0.3.2. If None, the namespaces created using this template will not have access to any virtual machine classes and Content Libraries by default.

class Capability(string)

Bases: vmware.vapi.bindings.enum.Enum

The NamespaceSelfService.Capability class describes the self-service namespace capability of the cluster on which vSphere Namespaces enabled. This enumeration was added in vSphere API 7.0.2.00100.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Capability instance.

NOTSUPPORTED = Capability(string='NOTSUPPORTED')

The value that indicates the cluster doesn’t support the self-service namespace capability. The expected transition UNKNOWN –> NOTSUPPORTED. This class attribute was added in vSphere API 7.0.2.00100.

SUPPORTED = Capability(string='SUPPORTED')

The value that indicates the cluster supports self-service namespace capability. The expected transition UNKNOWN –> SUPPORTED. This class attribute was added in vSphere API 7.0.2.00100.

UNKNOWN = Capability(string='UNKNOWN')

The initial value that represents the in-progress activity of determining the cluster’s self-service namespace capability. This class attribute was added in vSphere API 7.0.2.00100.

class Info(cluster=None, capability=None, status=None, messages=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceSelfService.Info class contains detailed information about the namespace self service. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier for the cluster to which namespace service is associated. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • capability (NamespaceSelfService.Capability) – The self-service namespace capability of the cluster with vSphere Namespaces enabled. This attribute was added in vSphere API 7.0.2.00100.

  • status (NamespaceSelfService.Status) – The current status of the namespace-self-service. This attribute was added in vSphere API 7.0.2.00100.

  • messages (list of Instances.Message) – Current set of messages associated with the object. This attribute was added in vSphere API 7.0.2.00100.

class Status(string)

Bases: vmware.vapi.bindings.enum.Enum

The page describes the status of the namespace self-service on the cluster on which vSphere Namespaces enabled. This enumeration was added in vSphere API 7.0.2.00100.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Status instance.

CONFIGURING = Status(string='CONFIGURING')

The configuration is being applied to the service. This class attribute was added in vSphere API 7.0.2.00100.

DEACTIVATED = Status(string='DEACTIVATED')

The namespace self service is deactivated. This status also represents the initial status of the service before activation. The expected transitions after the service is activated: 1. CONFIGURING –> RUNNING –> REMOVING –> DEACTIVATED 2. CONFIGURING –> REMOVING –> DEACTIVATED. This class attribute was added in vSphere API 7.0.2.00100.

ERROR = Status(string='ERROR')

Failed to apply the configuration to the namespace self-service or unable to deactivate the namespace self-service, user intervention needed. The expected transitions: 1. CONFIGURING –> ERROR 2. CONFIGURING –> RUNNING –> ERROR 3. CONFIGURING –> RUNNING –> REMOVING –> ERROR 4. CONFIGURING –> REMOVING –> ERROR The NamespaceSelfService.Info.messages field captures the relevant error messages explaining this ERROR status. This class attribute was added in vSphere API 7.0.2.00100.

REMOVING = Status(string='REMOVING')

The configuration is being removed and service is being deleted. The expected transitions: 1. CONFIGURING –> RUNNING –> REMOVING 2. CONFIGURING –> REMOVING. This class attribute was added in vSphere API 7.0.2.00100.

RUNNING = Status(string='RUNNING')

The namespace self service is configured correctly. The expected transitions: 1. CONFIGURING –> RUNNING 2. RUNNING –> CONFIGURING. This transition occurs in the below scenarios: a. When different Dev Users/Groups are empowered with self-service namespace access. b. To reconcile the state of the cluster after the cluster upgrade. This class attribute was added in vSphere API 7.0.2.00100.

class Summary(cluster=None, capability=None, status=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceSelfService.Summary class contains basic information about the namespace service. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier for the cluster to which namespace service is associated. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • capability (NamespaceSelfService.Capability) – The self-service namespace capability of the cluster with vSphere Namespaces enabled. This attribute was added in vSphere API 7.0.2.00100.

  • status (NamespaceSelfService.Status) – The current status of the namespace-self-service. This attribute was added in vSphere API 7.0.2.00100.

activate(cluster)

Activate Namespace Self Service on the cluster on which vSphere Namespaces enabled. This operation empowers Dev Users/Groups as self-service namespace users to create Supervisor Namespaces through kubectl create namespace command. activate requires the availability of one or more templates in the system. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters

cluster (str) – Identifier for the cluster on which vSphere Namespaces will be enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the cluster already has Namespace Self Service activated.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster with vSphere Namespaces enabled could not be located or no namespace templates exists.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if the specified cluster is not licensed.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.SelfServiceManage privilege.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the service is marked for deactivation or the associated cluster is being disabled or no namespace template exists in the system.

activate_with_template(cluster, spec)

Activate Namespace Self Service on the cluster after configuring namespace template. This is another variant of activate except configures template before activation. The template configuration includes either creating a new template or updating the existing template, depending on the template’s existence. Here is supported the flow of actions using the activateWithTemplate call: 1. Activate with the new template using activateWithTemplate call. 2. Deactivate using deactivate call. 3. Active with updating the existing template using activateWithTemplate. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters
  • cluster (str) – Identifier for the cluster on which vSphere Namespaces will be enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (NamespaceSelfService.ActivateTemplateSpec) – Specification for activating namespace self service on the cluster by granting users/groups to create Supervisor Namespaces.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the cluster already has Namespace Self Service activated.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster with vSphere Namespaces enabled could not be located.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if the specified cluster is not licensed.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.SelfServiceManage privilege.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the service is marked for deactivation or the associated cluster is being disabled.

deactivate(cluster)

Deactivate Namespace Self Service on the cluster on which vSphere Namespaces enabled. This operation reverses Dev Users/Group’s self-service namespace capability on the cluster. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters

cluster (str) – Identifier for the cluster for which vSphere Namespaces will be disabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster with vSphere Namespaced enabled is not found.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.SelfServiceManage privilege.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the service is not activated.

get(cluster)

Returns information about Namespace Self Service of a specific cluster. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters

cluster (str) – Identifier for the cluster on which vSphere Namespaces are enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

NamespaceSelfService.Info

Returns

Information about the namespace self service associated with the specified cluster.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster with vSphere Namespaced enabled could not be located.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list()

Returns basic information about Namespace Self Service on all clusters on which vSphere Namespaces are enabled on this vCenter. This method was added in vSphere API 7.0.2.00100.

Return type

list of NamespaceSelfService.Summary

Returns

List of summary of Namespace Self Service associated with all clusters with vSphere Namespaces enabled.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

class com.vmware.vcenter.namespaces_client.NamespaceTemplates(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The NamespaceTemplates class provides methods to create and update namespace templates on a cluster. The namespace templates are used if the NamespaceSelfService is enabled on a Supervisor. This class was added in vSphere API 7.0.2.00100.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(template=None, resource_spec=None, storage_specs=None, networks=None, permissions=None, vm_service_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceTemplates.CreateSpec class contains the specification required to create namespace template. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • template (str) – Identifier of the namespace template. This has DNS_LABEL restrictions as specified in ` <https://tools.ietf.org/html/rfc1123>`_. This name is unique across all namespaces templates in this vCenter server. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • resource_spec (vmware.vapi.struct.VapiStruct) – Resource quotas that this template defines. Resource quota on the namespace. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions.Info#createResourceQuotaType and use com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for retrieving the type for the value for this field. For an example of this, see ResourceQuotaOptionsV1. This attribute was added in vSphere API 7.0.2.00100.

  • storage_specs (list of Instances.StorageSpec) – Storage that this template defines and will be associated with a namespace after namespace realization. This field should not be empty and at least one policy should be supplied. The {link create} throws {term InvalidArgument} exception if this field is set empty. This attribute was added in vSphere API 7.0.2.00100.

  • networks (list of str or None) – vSphere Networks that this template captures and are associated with the namespace after namespace realization. vSphere Namespaces network objects to be associated with the namespace. The values of this list need to reference names of pre-existing com.vmware.vcenter.namespace_management.Networks.Info classs. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. The field must be left None if the cluster hosting the namespace uses NSXT_CONTAINER_PLUGIN as the network provider, since the network(s) for this namespace will be managed by NSX-T Container Plugin. If field is None when the cluster hosting the namespace uses VSPHERE_NETWORK as its network provider, the namespace will automatically be associated with the cluster’s Supervisor Primary Workload Network. The field currently accepts at most only 1 vSphere Namespaces network object reference.

  • permissions (list of NamespaceTemplates.Subject or None) – Permissions associated with namespace template. This attribute was added in vSphere API 7.0.2.00100. If None, only users with the Administrator role can use this template; for example, this template is applied to the namespace created by self-service-users with the Administrator role.

  • vm_service_spec (Instances.VMServiceSpec or None) – VM Service specification to be associated with the namespace template. Namespaces created using this template will have access to the virtual machine classes and Content Libraries specified in the NamespaceTemplates.CreateSpec.vm_service_spec by default. This attribute was added in vSphere API 7.0.3.2. If None, the namespaces created using this template will not have access to any virtual machine classes and Content Libraries by default.

class Info(cluster=None, template=None, resource_spec=None, storage_specs=None, networks=None, permissions=None, vm_service_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceTemplates.Info class contains the detailed information about the namespace template. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier for the vSphere cluster associated with namespace template. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • template (str) – Name of the namespace template. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Resource quotas that this template defines. Quotas on the namespace resources. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for the type of the value for this field. This attribute was added in vSphere API 7.0.2.00100. If None, no resource constraints are defined in the namespace template.

  • storage_specs (list of Instances.StorageSpec) – Storage that this template defines and will be associated with a namespace after namespace realization. This attribute was added in vSphere API 7.0.2.00100.

  • networks (list of str or None) – vSphere Networks that this template captures and are associated with the namespace after namespace realization. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. This field is None if the cluster hosting this namespace uses NSXT_CONTAINER_PLUGIN as its network provider.

  • permissions (list of NamespaceTemplates.Subject or None) – Permissions associated with namespace template. This attribute was added in vSphere API 7.0.2.00100. If None, only users with the Administrator role can use this template; for example, this template is applied to the namespace created by self-service-users with the Administrator role.

  • vm_service_spec (Instances.VMServiceSpec or None) – Current set of virtual machine classes and Content Libraries associated with the template. This attribute was added in vSphere API 7.0.3.2. This attribute is optional because it was added in a newer version than its parent node.

class InfoV2(supervisor=None, template=None, resource_spec=None, storage_specs=None, networks=None, permissions=None, vm_service_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceTemplates.InfoV2 class contains the detailed information about the namespace template on a Supervisor. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor (str) – Identifier for the Supervisor associated with namespace template. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • template (str) – Name of the namespace template. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Resource quotas that this template defines. Quotas on the namespace resources. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for the type of the value for this field. This attribute was added in vSphere API 7.0.2.00100. If None, no resource constraints are defined in the namespace template.

  • storage_specs (list of Instances.StorageSpec) – Storage that this template defines and will be associated with a namespace after namespace realization. This attribute was added in vSphere API 7.0.2.00100.

  • networks (list of str or None) – vSphere Networks that this template captures and are associated with the namespace after namespace realization. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. This field is None if the cluster hosting this namespace uses NSXT_CONTAINER_PLUGIN as its network provider.

  • permissions (list of NamespaceTemplates.Subject or None) – Permissions associated with namespace template. This attribute was added in vSphere API 7.0.2.00100. If None, only users with the Administrator role can use this template; for example, this template is applied to the namespace created by self-service-users with the Administrator role.

  • vm_service_spec (Instances.VMServiceSpec or None) – Current set of virtual machine classes and Content Libraries associated with the template. This attribute was added in vSphere API 7.0.3.2. This attribute is optional because it was added in a newer version than its parent node.

RESOURCE_TYPE = 'com.vmware.vcenter.namespaces.NamespaceTemplate'

The resource type for namespace template. This class attribute was added in vSphere API 7.0.2.00100.

class Subject(subject_type=None, subject=None, domain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceTemplates.Subject class contains the user or group information granted for namespace self service. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • subject_type (Access.SubjectType) – Type of the subject. This attribute was added in vSphere API 7.0.2.00100.

  • subject (str) – Name of the subject. This attribute was added in vSphere API 7.0.2.00100.

  • domain (str) – Domain of the subject. This attribute was added in vSphere API 7.0.2.00100.

class Summary(cluster=None, template=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceTemplates.Summary class contains the basic information about the namespace template. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifier for the vSphere cluster associated with namespace template. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • template (str) – Name of the namespace template. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

class SummaryV2(supervisor=None, template=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceTemplates.SummaryV2 class contains the basic information about the namespace template on a Supervisor. This class was added in vSphere API 8.0.0.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supervisor (str) – Identifier for the Supervisor associated with namespace template. This attribute was added in vSphere API 8.0.0.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • template (str) – Name of the namespace template. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

class UpdateSpec(resource_spec=None, storage_specs=None, networks=None, permissions=None, vm_service_spec=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NamespaceTemplates.UpdateSpec class contains the specification required to update a namespace namespace template. This class was added in vSphere API 7.0.2.00100.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • resource_spec (vmware.vapi.struct.VapiStruct or None) – Resource quota on the namespace. Refer to com.vmware.vcenter.namespace_management.NamespaceResourceOptions.Info#createResourceQuotaType and use com.vmware.vcenter.namespace_management.NamespaceResourceOptions#get for retrieving the type for the value for this field. For an example of this, see ResourceQuotaOptionsV1. This attribute was added in vSphere API 7.0.2.00100. If None, no resource limits will be set on the namespace.

  • storage_specs (list of Instances.StorageSpec or None) – Storage that this template defines and will be associated with a namespace after namespace realization. This attribute was added in vSphere API 7.0.2.00100. If None then no update will be made.

  • networks (list of str or None) – vSphere Namespaces network objects to be associated with the namespace. The values of this list need to reference names of pre-existing com.vmware.vcenter.namespace_management.Networks.Info classs. This attribute was added in vSphere API 7.0.2.00100. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.namespace_management.Network. The field must be left None if the cluster hosting the namespace uses NSXT_CONTAINER_PLUGIN as the network provider, since the network(s) for this namespace will be managed by NSX-T Container Plugin. If field is None when the cluster hosting the namespace uses VSPHERE_NETWORK as its network provider, the namespace will automatically be associated with the cluster’s Supervisor Primary Workload Network. The field currently accepts at most only 1 vSphere Namespaces network object reference.

  • permissions (list of NamespaceTemplates.Subject or None) – Permissions associated with namespace template. This attribute was added in vSphere API 7.0.2.00100. If None, only users with the Administrator role can use this template; for example, this template is applied to the namespace created by self-service-users with the Administrator role.

  • vm_service_spec (Instances.VMServiceSpec or None) – VM Service specification to be associated with the namespace template. The virtual machine classes and Content Library associations of the template will be updated according to the NamespaceTemplates.UpdateSpec.vm_service_spec. This attribute was added in vSphere API 7.0.3.2. If None, the virtual machine classes and Content Library associations of the template will not be modified.

create(cluster, spec)

Creates a namespace template on a cluster on which vSphere Namespaces are enabled in this vCenter Server. This release supports creating a single namespace template, and the call fails if there is a request to make another one. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters
  • cluster (str) – Identifier for the cluster on which vSphere Namespaces are enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (NamespaceTemplates.CreateSpec) – Specification for setting up the namespace template.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors, or if {link CreateSpec#storageSpecs} is empty, or if {link CreateSpec#resourceSpec} is not set with {term memory_limit}, {term cpu_limit}, {term storage_request_limit}, or if {link CreateSpec#networks} is not set with networks if the {term cluster} hosting the namespaces uses VSPHERE_NETWORK as its network provider, or if {link CreateSpec#networks} is not empty if the {term cluster} hosting the namespaces uses NSXT_CONTAINER_PLUGIN as its network provider.

Raise

com.vmware.vapi.std.errors_client.Unsupported if a request arrives to create a second template.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.SelfServiceManage privilege.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the namespace template with given name already exists.

create_v2(supervisor, spec)

Creates a namespace template on a Supervisor. This release supports creating a single namespace template, and the call fails if there is a request to make another one. This method was added in vSphere API 8.0.0.1.

Parameters
  • supervisor (str) – Identifier for the Supervisor. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • spec (NamespaceTemplates.CreateSpec) – Specification for setting up the namespace template.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors, or if {link CreateSpec#storageSpecs} is empty, or if {link CreateSpec#resourceSpec} is not set with {term memory_limit}, {term cpu_limit}, {term storage_request_limit}, or if {link CreateSpec#networks} is not set with networks if the Supervisor hosting the namespaces uses VSPHERE_NETWORK as its network provider, or if {link CreateSpec#networks} is not empty if the Supervisor hosting the namespaces uses NSXT_CONTAINER_PLUGIN as its network provider.

Raise

com.vmware.vapi.std.errors_client.Unsupported if a request arrives to create a second template.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.SelfServiceManage privilege.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the namespace template with given name already exists.

get(cluster, template)

Get the information about a namespace template on given cluster. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters
  • cluster (str) – Identifier for the cluster on which vSphere Namespaces are enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • template (str) – Name of the namespace template. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

Return type

NamespaceTemplates.Info

Returns

Information about the namespace template.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster doesn’t exist or if template doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

get_v2(supervisor, template)

Get the information about a namespace template on a Supervisor. This method was added in vSphere API 8.0.0.1.

Parameters
  • supervisor (str) – Identifier for the Supervisor. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • template (str) – Name of the namespace template. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

Return type

NamespaceTemplates.InfoV2

Returns

Information about the namespace template.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor doesn’t exist or if template doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list(cluster)

Returns information about all the namespace templates associated with a cluster on which vSphere Namespaces are enabled in this vCenter Server. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters

cluster (str) – Identifier for the cluster on which vSphere Namespaces are enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

list of NamespaceTemplates.Summary

Returns

List of summary of all namespace templates associated with cluster with vSphere Namespaces enabled.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

list_v2(supervisor)

Returns information about all the namespace templates associated with a Supervisor. This method was added in vSphere API 8.0.0.1.

Parameters

supervisor (str) – Identifier for the Supervisor. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

Return type

list of NamespaceTemplates.SummaryV2

Returns

List of summary of all namespace templates associated with the Supervisor.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have System.Read privilege.

update(cluster, template, spec)

Updates a namespace template associated with cluster on which vSphere Namespaces are enabled in this vCenter Server. The specified configuration is applied partially and None fields in spec will leave those parts of configuration as-is. A Supervisor can be running on one or multiple vSphere Zones, and each vSphere Zone is associated with one or more vSphere Clusters. If a Supervisor running on the specified vSphere Cluster is running on additional vSphere Clusters, this operation will apply to Supervisor components running on the other vSphere Clusters in addition to the specified vSphere Cluster. To call this API on a Supervisor with multiple vSphere Clusters, use com.vmware.vcenter.namespace_management.supervisors.Topology#get to get the vSphere Clusters associated with the given Supervisor. Any cluster from the list returned can be used as the input of this API. This method was added in vSphere API 7.0.2.00100.

Parameters
  • cluster (str) – Identifier for cluster on which vSphere Namespaces are enabled. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • template (str) – Name of the namespace template. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

  • spec (NamespaceTemplates.UpdateSpec) – Specification for updating the namespace template.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster doesn’t exist or if template doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.SelfServiceManage privilege.

update_v2(supervisor, template, spec)

Updates a namespace template associated with a Supervisor. The specified configuration is applied partially and None fields in spec will leave those parts of configuration as-is. This method was added in vSphere API 8.0.0.1.

Parameters
  • supervisor (str) – Identifier for the Supervisor. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespace_management.supervisor.Supervisor.

  • template (str) – Name of the namespace template. The parameter must be an identifier for the resource type: com.vmware.vcenter.namespaces.NamespaceTemplate.

  • spec (NamespaceTemplates.UpdateSpec) – Specification for updating the namespace template.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the Supervisor doesn’t exist or if template doesn’t exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contain any errors.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user does not have Namespaces.SelfServiceManage privilege.

class com.vmware.vcenter.namespaces_client.ResourceQuotaOptionsV1(memory_limit=None, memory_limit_default=None, memory_request_default=None, cpu_limit=None, cpu_limit_default=None, cpu_request_default=None, storage_request_limit=None, pod_count=None, service_count=None, deployment_count=None, daemon_set_count=None, replica_set_count=None, replication_controller_count=None, stateful_set_count=None, config_map_count=None, secret_count=None, persistent_volume_claim_count=None, job_count=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ResourceQuotaOptionsV1 class represents the resource quota limits which can be applied on the namespace. Refer to ` <https://kubernetes.io/docs/concepts/policy/resource-quotas>`_ for information related to the properties of this object and what they map to.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • memory_limit (long or None) – This is equivalent to ‘limits.memory’ option which is the maximum memory limit (in mebibytes) across all pods which exist in a non-terminal state in the namespace. This value translates to the memory limit on the ResourcePool in vCenter Server created for the namespace. If None, no memory limits are set on the ResourcePool for the namespace.

  • memory_limit_default (long or None) – This represents the default memory limit (in mebibytes) for containers in the pod. This translates to default memory limit in a LimitRange object. Refer ` for information about LimitRange. <https://kubernetes.io/docs/tasks/administer-cluster/manage-resources/memory-default-namespace/>`_ If None, no default memory limits are set on containers in the pod.

  • memory_request_default (long or None) – This represents the default memory request (in mebibytes) for containers in the pod. This translates to default memory request in a LimitRange object. Refer ` for information about LimitRange. <https://kubernetes.io/docs/tasks/administer-cluster/manage-resources/memory-default-namespace/>`_ If None, no default memory requests are set on containers in the pod.

  • cpu_limit (long or None) – This is equivalent to ‘limits.cpu’ option which is the maximum CPU limit (in MHz) across all pods which exist in a non-terminal state in the namespace. If specified, this limit should be at least 10 MHz. This value translates to the CPU limit on the ResourcePool in vCenter Server created for the namespace. If None, no CPU limits are set on the ResourcePool for the namespace.

  • cpu_limit_default (long or None) – This represents the default cpu limit (in MHz) for containers in the pod. If None, no default CPU limits are set on containers in the pod. Refer ` for information about LimitRange. If specified, this limit should be at least 10 MHz. <https://kubernetes.io/docs/tasks/administer-cluster/manage-resources/memory-default-namespace/>`_

  • cpu_request_default (long or None) – This represents the default CPU request (in MHz) for containers in the pod. If None, no default CPU requests are set on containers in the pod. Refer ` for information about LimitRange. If specified, this field should be at least 10 MHz. <https://kubernetes.io/docs/tasks/administer-cluster/manage-resources/cpu-default-namespace/>`_

  • storage_request_limit (long or None) – This represents ‘requests.storage’ option which is the maximum storage request (in mebibytes) across all persistent volume claims from pods which exist in a non-terminal state in the namespace. If None, no storage request limits are set on the namespace.

  • pod_count (long or None) – This represents ‘pods’ option which is the maximum number of pods which exist in a non-terminal state in the namespace. If None, no pod limits are set on the namespace.

  • service_count (long or None) – This represents ‘count/services’ option which is the maximum number of services in the namespace. If None, no service limits are set on the namespace.

  • deployment_count (long or None) – This represents ‘count/deployments.apps’ option which is the maximum number of deployments in the namespace. If None, no deployment limits are set on the namespace.

  • daemon_set_count (long or None) – This represents ‘count/daemonsets.apps’ option which is the maximum number of DaemonSets in the namespace. If None, no daemonset limits are set on the namespace.

  • replica_set_count (long or None) – This represents ‘count/replicasets.apps’ option which is the maximum number of ReplicaSets in the namespace. If None, no replicaset limits are set on the namespace.

  • replication_controller_count (long or None) – This represents ‘count/replicationcontrollers’ option which is the maximum number of ReplicationControllers in the namespace. If None, no replicationcontroller limits are set on the namespace.

  • stateful_set_count (long or None) – This represents ‘count/statefulsets.apps’ option which is the maximum number of StatefulSets in the namespace. If None, no statefulset limits are set on the namespace.

  • config_map_count (long or None) – This represents ‘count/configmaps’ option which is the maximum number of ConfigMaps in the namespace. If None, no configmap limits are set on the namespace.

  • secret_count (long or None) – This represents ‘count/secrets’ option which is the maximum number of secrets in the namespace. If None, no secret limits are set on the namespace.

  • persistent_volume_claim_count (long or None) – This represents ‘count/persistentvolumeclaims’ option which is the maximum number of PersistentVolumeClaims in the namespace. If None, no persistentvolumeclaim limits are set on the namespace.

  • job_count (long or None) – This represents ‘count/jobs.batch’ option which is the maximum number jobs in the namespace. If None, no job limits are set on the namespace.

class com.vmware.vcenter.namespaces_client.ResourceQuotaOptionsV1Update(memory_limit=None, memory_limit_unset=None, memory_limit_default=None, memory_limit_default_unset=None, memory_request_default=None, memory_request_default_unset=None, cpu_limit=None, cpu_limit_unset=None, cpu_limit_default=None, cpu_limit_default_unset=None, cpu_request_default=None, cpu_request_default_unset=None, storage_request_limit=None, storage_request_limit_unset=None, pod_count=None, pod_count_unset=None, service_count=None, service_count_unset=None, deployment_count=None, deployment_count_unset=None, daemon_set_count=None, daemon_set_count_unset=None, replica_set_count=None, replica_set_count_unset=None, replication_controller_count=None, replication_controller_count_unset=None, stateful_set_count=None, stateful_set_count_unset=None, config_map_count=None, config_map_count_unset=None, secret_count=None, secret_count_unset=None, persistent_volume_claim_count=None, persistent_volume_claim_count_unset=None, job_count=None, job_count_unset=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ResourceQuotaOptionsV1Update class represents the changes to resource quota limits which are set on the namespace. Refer to ` <> Kubernetes Resource Quota <https://kubernetes.io/docs/concepts/policy/resource-quotas>`_ for information related to the properties of this object and what they map to.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • memory_limit (long or None) – This represents the new value for ‘limits.memory’ option which is equivalent to the maximum memory limit (in mebibytes) across all pods in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.memory_limit_unset is set to true. If None, the existing memory limit on the ResourcePool will be unchanged if ResourceQuotaOptionsV1Update.memory_limit_unset is None or set to false.

  • memory_limit_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.memory_limit. If this field is set to true, the existing memory limit on the ResourcePool is removed. If this field is set to false, the existing memory limit will be changed to the value specified in ResourceQuotaOptionsV1Update.memory_limit, if any. If None, the existing memory limit will be changed to the value specified in ResourceQuotaOptionsV1Update.memory_limit, if any.

  • memory_limit_default (long or None) – This represents the new value for the default memory limit (in mebibytes) for containers in the pod. This field is ignored if ResourceQuotaOptionsV1Update.memory_limit_default_unset is set to true. If None, the existing memory limit will be unchanged if ResourceQuotaOptionsV1Update.memory_limit_default_unset is None or set to false.

  • memory_limit_default_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.memory_limit_default. If this field is set to true, the existing default memory limit on containers in the pod is removed. If this field is set to false, the existing default memory limit will be changed to the value specified in ResourceQuotaOptionsV1Update.memory_limit_default, if any. If None, the existing default memory limit will be changed to the value specified in ResourceQuotaOptionsV1Update.memory_limit_default, if any.

  • memory_request_default (long or None) – This represents the new value for the default memory request (in mebibytes) for containers in the pod. This field is ignored if ResourceQuotaOptionsV1Update.memory_request_default_unset is set to true. If None, the existing memory request will be unchanged if ResourceQuotaOptionsV1Update.memory_request_default_unset is None or set to false.

  • memory_request_default_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.memory_request_default. If this field is set to true, the existing default memory request on containers in the pod will be removed. If this field is set to false, the existing default memory request will be changed to the value specified in ResourceQuotaOptionsV1Update.memory_request_default, if any. If None, the existing default memory request will be changed to the value specified in ResourceQuotaOptionsV1Update.memory_request_default, if any.

  • cpu_limit (long or None) – This represents the new value for ‘limits.cpu’ option which is equivalent to the maximum CPU limit (in MHz) across all pods in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.cpu_limit_unset is set to true. If specified, this limit should be at least 10 MHz. If None, the existing CPU limit on the ResourcePool will be unchanged if ResourceQuotaOptionsV1Update.cpu_limit_unset is None or set to false.

  • cpu_limit_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.cpu_limit. If this field is set to true, the existing CPU limit on the ResourcePool is removed. If this field is set to false, the existing CPU limit will be changed to the value specified in ResourceQuotaOptionsV1Update.cpu_limit, if any. If None, the existing CPU limit will be changed to the value specified in ResourceQuotaOptionsV1Update.memory_limit, if any.

  • cpu_limit_default (long or None) – This represents the new value for the default CPU limit (in Mhz) for containers in the pod. This field is ignored if ResourceQuotaOptionsV1Update.cpu_limit_default_unset is set to true. If specified, this limit should be at least 10 MHz. If None, the existing default CPU limit will be unchanged if ResourceQuotaOptionsV1Update.cpu_limit_default_unset is None or set to false.

  • cpu_limit_default_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.cpu_limit_default. If this field is set to true, the existing default CPU limit on containers in the pod is removed. If this field is set to false, the existing default CPU limit will be changed to the value specified in ResourceQuotaOptionsV1Update.cpu_limit_default, if any. If None, the existing default CPU limit will be changed to the value specified in ResourceQuotaOptionsV1Update.cpu_limit_default, if any.

  • cpu_request_default (long or None) – This represents the new value for the default CPU request (in Mhz) for containers in the pod. This field is ignored if ResourceQuotaOptionsV1Update.cpu_request_default_unset is set to true. If specified, this field should be at least 10 MHz. If None, the existing default CPU request will be unchanged if ResourceQuotaOptionsV1Update.cpu_request_default_unset is None or set to false.

  • cpu_request_default_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.cpu_request_default. If this field is set to true, the existing default CPU request on containers in the pod is removed. If this field is set to false, the existing default CPU request will be changed to the value specified in ResourceQuotaOptionsV1Update.cpu_request_default, if any. If None, the existing default CPU request will be changed to the value specified in ResourceQuotaOptionsV1Update.cpu_request_default, if any.

  • storage_request_limit (long or None) – This represents the new value for ‘requests.storage’ which is the limit on storage requests (in mebibytes) across all persistent volume claims from pods in the namespace. This field is ignored if if ResourceQuotaOptionsV1Update.storage_request_limit_unset is set to true. If None, the existing storage request limit will be unchanged if ResourceQuotaOptionsV1Update.storage_request_limit_unset is None or set to false. the namespace.

  • storage_request_limit_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.storage_request_limit. If this field is set to true, the existing storage request limit will be reset. If this field is set to false, the existing storage request limit will be changed to the value specified in ResourceQuotaOptionsV1Update.storage_request_limit, if any. If None, the existing storage request limit will be changed to the value specified in ResourceQuotaOptionsV1Update.storage_request_limit, if any.

  • pod_count (long or None) – This represents the new value for ‘podCount’ option which is the maximum number of pods in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.pod_count_unset is set to true. If None, the existing ‘podCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.pod_count_unset is None or set to false.

  • pod_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.pod_count. If this field is set to true, the existing ‘podCount’ limit on the namespace will be reset. If this field is set to false, the existing CPU limit will be changed to the value specified in ResourceQuotaOptionsV1Update.pod_count, if any. If None, the existing ‘podCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.pod_count, if any.

  • service_count (long or None) – This represents the new value for ‘serviceCount’ option which is the maximum number of services in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.service_count_unset is set to true. If None, the existing ‘serviceCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.service_count_unset is None or set to false.

  • service_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.service_count. If this field is set to true, the existing ‘serviceCount’ limit on the namespace will be reset. If this field is set to false, the existing service count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.service_count, if any. If None, the existing ‘serviceCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.service_count, if any.

  • deployment_count (long or None) – This represents the new value for ‘deploymentCount’ option which is the maximum number of deployments in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.deployment_count_unset is set to true. If None, the existing ‘deploymentCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.deployment_count_unset is None or set to false.

  • deployment_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.deployment_count. If this field is set to true, the existing ‘deploymentCount’ limit on the namespace will be reset. If this field is set to false, the existing deployment count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.deployment_count, if any. If None, the existing ‘deploymentCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.deployment_count, if any.

  • daemon_set_count (long or None) – This represents the new value for ‘daemonSetCount’ option which is the maximum number of DaemonSets in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.daemon_set_count_unset is set to true. If None, the existing ‘daemonSetCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.daemon_set_count_unset is None or set to false.

  • daemon_set_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.daemon_set_count. If this field is set to true, the existing ‘daemonSetCount’ limit on the namespace will be reset. If this field is set to false, the existing daemonset count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.daemon_set_count, if any. If None, the existing ‘daemonSetCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.daemon_set_count, if any.

  • replica_set_count (long or None) – This represents the new value for ‘replicaSetCount’ option which is the maximum number of ReplicaSets in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.replica_set_count_unset is set to true. If None, the existing ‘replicaSetCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.replica_set_count_unset is None or set to false.

  • replica_set_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.replica_set_count. If this field is set to true, the existing ‘replicaSetCount’ limit on the namespace will be reset. If this field is set to false, the existing replicaset count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.replica_set_count, if any. If None, the existing ‘replicaSetCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.replica_set_count, if any.

  • replication_controller_count (long or None) – This represents the new value for ‘replicationControllerCount’ option which is the maximum number of ReplicationControllers in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.replication_controller_count_unset is set to true. If None, the existing ‘replicationControllerCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.replication_controller_count_unset is None or set to false.

  • replication_controller_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.replication_controller_count. If this field is set to true, the existing ‘replicationControllerCount’ limit on the namespace will be reset. If this field is set to false, the existing replicationcontroller count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.replication_controller_count, if any. If None, the existing ‘replicationControllerCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.replication_controller_count, if any.

  • stateful_set_count (long or None) – This represents the new value for ‘statefulSetCount’ option which is the maximum number of StatefulSets in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.stateful_set_count_unset is set to true. If None, the existing ‘statefulSetCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.stateful_set_count_unset is None or set to false.

  • stateful_set_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.stateful_set_count. If this field is set to true, the existing ‘statefulSetCount’ limit on the namespace will be reset. If this field is set to false, the existing statefulset count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.stateful_set_count, if any. If None, the existing ‘statefulSetCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.stateful_set_count, if any.

  • config_map_count (long or None) – This represents the new value for ‘configMapCount’ option which is the maximum number of ConfigMaps in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.config_map_count_unset is set to true. If None, the existing ‘configMapCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.config_map_count_unset is None or set to false.

  • config_map_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.config_map_count. If this field is set to true, the existing ‘configMapCount’ limit on the namespace will be reset. If this field is set to false, the existing configmap count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.config_map_count, if any. If None, the existing ‘configMapCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.config_map_count, if any.

  • secret_count (long or None) – This represents the new value for ‘secretCount’ option which is the maximum number of secrets in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.secret_count_unset is set to true. If None, the existing ‘secretCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.secret_count_unset is None or set to false.

  • secret_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.secret_count. If this field is set to true, the existing ‘secretCount’ limit on the namespace will be reset. If this field is set to false, the existing secret count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.secret_count, if any. If None, the existing ‘secretCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.secret_count, if any.

  • persistent_volume_claim_count (long or None) – This represents the new value for ‘persistentVolumeClaimCount’ option which is the maximum number of PersistentVolumeClaims in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.persistent_volume_claim_count_unset is set to true. If None, the existing ‘persistentVolumeClaimCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.persistent_volume_claim_count_unset is None or set to false.

  • persistent_volume_claim_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.persistent_volume_claim_count. If this field is set to true, the existing ‘persistentVolumeClaimCount’ limit on the namespace will be reset. If this field is set to false, the existing replicationcontroller count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.persistent_volume_claim_count, if any. If None, the existing ‘persistentVolumeClaimCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.persistent_volume_claim_count, if any.

  • job_count (long or None) – This represents the new value for ‘jobCount’ option which is the maximum number of jobs in the namespace. This field is ignored if ResourceQuotaOptionsV1Update.job_count_unset is set to true. If None, the existing ‘jobCount’ limit will be unchanged if ResourceQuotaOptionsV1Update.job_count_unset is None or set to false.

  • job_count_unset (bool or None) – This represents the intent of the change to ResourceQuotaOptionsV1Update.job_count. If this field is set to true, the existing ‘jobCount’ limit on the namespace will be reset. If this field is set to false, the existing secret count limit will be changed to the value specified in ResourceQuotaOptionsV1Update.job_count, if any. If None, the existing ‘jobCount’ limit will be changed to the value specified in ResourceQuotaOptionsV1Update.job_count, if any.

class com.vmware.vcenter.namespaces_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.ovf_client module

The com.vmware.vcenter.ovf_client module provides services to capture and deploy Open Virtualization Format (OVF) packages to and from the content library.

It provides the ability to deploy OVF packages from the content library with support for advanced network topologies, network services, creating virtual appliances and virtual machines in hosts, resource pools or clusters. It also provides the ability to export virtual appliances and virtual machines from hosts, resource pools or clusters as OVF packages to the content library.

class com.vmware.vcenter.ovf_client.CertificateParams(issuer=None, subject=None, is_valid=None, is_self_signed=None, x509=None, warnings=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CertificateParams class contains information about the public key certificate used to sign the OVF package. This class will only be returned if the OVF package is signed.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • issuer (str) – Certificate issuer. For example: /C=US/ST=California/L=Palo Alto/O=VMware, Inc. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • subject (str) – Certificate subject. For example: /C=US/ST=Massachusetts/L=Hopkinton/O=EMC Corporation/OU=EMC Avamar/CN=EMC Corporation. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • is_valid (bool) – Is the certificate chain validated. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • is_self_signed (bool) – Is the certificate self-signed. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • x509 (str) – The X509 representation of the certificate. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • warnings (list of WarningInfo) – The list of warnings raised for the OVF certificate used in this OVF package deployment. Any warning that is not ignored by the client will cause the OVF package deployment to fail. This attribute was added in vSphere API 7.0.2.0. This attribute is set only if the certificate has warnings when retrieving information about an OVF package by LibraryItem.filter(). When the attribute is set, the WarningInfo.ignored attribute can be updated before the OVF parameter is passed to LibraryItem.deploy() to deploy the OVF package.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.DeploymentOption(key=None, label=None, description=None, default_choice=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DeploymentOption class contains the information about a deployment option as defined in the OVF specification.

This corresponds to the ovf:Configuration element of the ovf:DeploymentOptionSection in the specification. The ovf:DeploymentOptionSection specifies a discrete set of intended resource allocation configurations. This class represents one item from that set.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • key (str) – The key of the deployment option, corresponding to the ovf:id attribute in the OVF descriptor. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • label (str) – A localizable label for the deployment option. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • description (str) – A localizable description for the deployment option. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • default_choice (bool) – A bool flag indicates whether this deployment option is the default choice. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package. If None or false, it is not the default.

class com.vmware.vcenter.ovf_client.DeploymentOptionParams(deployment_options=None, selected_key=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DeploymentOptionParams class describes the possible deployment options as well as the choice provided by the user.

This information based on the ovf:DeploymentOptionSection.

See LibraryItem.deploy() and LibraryItem.filter().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • deployment_options (list of DeploymentOption) – list of deployment options. This attribute corresponds to the ovf:Configuration elements of the ovf:DeploymentOptionSection in the specification. It is a discrete set of intended resource allocation configurations from which one can be selected. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • selected_key (str) – The selected deployment option. Identifies the DeploymentOption in the list in the deploymentOptions attribute with a matching value in the DeploymentOption.key attribute. This attribute is optional in the input parameters when deploying an OVF package. If None the server will use the default deployment configuration, usually it’s the first one in DeploymentOptionParams.deployment_options list. This attribute is optional in the result when retrieving information about an OVF package. The value will be set only if it is specified with the optional ovf:default attribute.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.DiskProvisioningType(string)

Bases: vmware.vapi.bindings.enum.Enum

The DiskProvisioningType class defines the virtual disk provisioning types that can be set for a disk on the target platform.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the DiskProvisioningType instance.

eagerZeroedThick = DiskProvisioningType(string='eagerZeroedThick')

An eager zeroed thick provisioned virtual disk has all space allocated and wiped clean of any previous contents on the physical media at creation time.

Disks specified as eager zeroed thick may take longer time to create than disks specified with the other disk provisioning types.

thick = DiskProvisioningType(string='thick')

A thick provisioned virtual disk has all space allocated at creation time and the space is zeroed on demand as the space is used.

thin = DiskProvisioningType(string='thin')

A thin provisioned virtual disk has space allocated and zeroed on demand as the space is used.

class com.vmware.vcenter.ovf_client.ExportFlag(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The ExportFlag class provides methods for retrieving information about the export flags supported by the server. Export flags can be specified in a LibraryItem.CreateSpec to customize an OVF export.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(option=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ExportFlag.Info class describes an export flag supported by the server.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
list()

Returns information about the supported export flags by the server.

The supported flags are:

PRESERVE_MAC

Include MAC addresses for network adapters.

EXTRA_CONFIG

Include extra configuration in OVF export.

Future server versions might support additional flags.

Return type

list of ExportFlag.Info

Returns

A list of supported export flags.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

class com.vmware.vcenter.ovf_client.ExtraConfig(key=None, value=None, virtual_system_id=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ExtraConfig class contains the information about a vmw:ExtraConfig element which can be used to specify configuration settings that are transferred directly to the .vmx file. The behavior of the vmw:ExtraConfig element is similar to the extraConfig property of the VirtualMachineConfigSpec object in the VMware vSphere API. Thus, the same restrictions apply, such as you cannot set values that could otherwise be set with other properties in the VirtualMachineConfigSpec object. See the VMware vSphere API reference for details on this.

vmw:ExtraConfig elements may occur as direct child elements of a VirtualHardwareSection, or as child elements of individual virtual hardware items.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • key (str) – The key of the ExtraConfig element. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • value (str) – The value of the ExtraConfig element. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • virtual_system_id (str) – The identifier of the virtual system containing the vmw:ExtraConfig element. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.ExtraConfigParams(extra_configs=None, exclude_keys=None, include_keys=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ExtraConfigParams class contains the parameters with information about the vmw:ExtraConfig elements in an OVF package.

vmw:ExtraConfig elements can be used to specify configuration settings that are transferred directly to the .vmx file.

The behavior of the vmw:ExtraConfig element is similar to the extraConfig property of the VirtualMachineConfigSpec object in the VMware vSphere API. Thus, the same restrictions apply, such as you cannot set values that could otherwise be set with other properties in the VirtualMachineConfigSpec object. See the VMware vSphere API reference for details on this.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • extra_configs (list of ExtraConfig) – list of vmw:ExtraConfig elements in the OVF package. This attribute is optional in the input parameters when deploying an OVF package. If None there are no extra configuration elements to use for this OVF package deployment. This attribute will always be present in the result when retrieving information about an OVF package. It will be an empty list if there are no extra configuration elements in the OVF package.

  • exclude_keys (list of str) –

    Specifies which extra configuration items in the list in the extraConfigs field should be ignored during deployment.

    If set, the given keys for extra configurations will be ignored during deployment. The key is defined in the ExtraConfig.key attribute. This attribute is optional in the input parameters when deploying an OVF package. It is an error to set both this and ExtraConfigParams.include_keys. This attribute is optional in the result when retrieving information about an OVF package. It is an error to set both this and ExtraConfigParams.include_keys.

  • include_keys (list of str) –

    Specifies which extra configuration items in the list in the extraConfigs field should be included during deployment.

    If set, all but the given keys for extra configurations will be ignored during deployment. The key is defined in the ExtraConfig.key attribute. This attribute is optional in the input parameters when deploying an OVF package. It is an error to set both this and ExtraConfigParams.exclude_keys. This attribute is optional in the result when retrieving information about an OVF package. It is an error to set both this and ExtraConfigParams.exclude_keys.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.ImportFlag(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The ImportFlag class provides methods for retrieving information about the import flags supported by the deployment platform. Import flags can be specified in a LibraryItem.ResourcePoolDeploymentSpec to customize an OVF deployment.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(option=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ImportFlag.Info class describes an import flag supported by the deployment platform.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
list(rp)

Returns information about the import flags supported by the deployment platform.

The supported flags are:

LAX

Lax mode parsing of the OVF descriptor.

Future server versions might support additional flags.

Parameters

rp (str) – The identifier of resource pool target for retrieving the import flag(s). The parameter must be an identifier for the resource type: ResourcePool.

Return type

list of ImportFlag.Info

Returns

A list of supported import flags.

Raise

com.vmware.vapi.std.errors_client.NotFound If the resource pool associated with rp does not exist.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource ResourcePool referenced by the parameter rp requires System.Read.

class com.vmware.vcenter.ovf_client.IpAllocationParams(supported_allocation_scheme=None, supported_ip_allocation_policy=None, ip_allocation_policy=None, supported_ip_protocol=None, ip_protocol=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The IpAllocationParams class specifies how IP addresses are allocated to OVF properties. In particular, it informs the deployment platform whether the guest supports IPv4, IPv6, or both. It also specifies whether the IP addresses can be obtained through DHCP or through the properties provided in the OVF environment.

Ovf Property elements are exposed to the guest software through the OVF environment. Each Property element exposed in the OVF environment shall be constructed from the value of the ovf:key attribute. A Property element contains a key/value pair, it may optionally specify type qualifiers using the ovf:qualifiers attribute with multiple qualifiers separated by commas.

The settings in IpAllocationParams class are global to a deployment. Thus, if a virtual machine is part of a virtual appliance, then its settings are ignored and the settings for the virtual appliance is used.

This information is based on the vmw:IpAssignmentSection in OVF package.

See LibraryItem.deploy() and LibraryItem.filter().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • supported_allocation_scheme (list of IpAllocationParams.IpAllocationScheme) – Specifies the IP allocation schemes supported by the guest software. This attribute defines the valid values for the IP allocation policy. This setting is often configured by the virtual appliance template author or OVF package author to reflect what the guest software supports, and the IP allocation policy is configured at deployment time. See IpAllocationParams.ip_allocation_policy. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • supported_ip_allocation_policy (list of IpAllocationParams.IpAllocationPolicy) – Specifies the IP allocation policies supported. The set of valid options for the policy is based on the capabilities of the virtual appliance software, as specified by the IpAllocationParams.supported_allocation_scheme attribute. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • ip_allocation_policy (IpAllocationParams.IpAllocationPolicy) – Specifies how IP allocation is done through an IP Pool. This is typically specified by the deployer. This attribute is optional in the input parameters when deploying an OVF package. If None there is no IP allocation policy. This attribute will always be present in the result when retrieving information about an OVF package.

  • supported_ip_protocol (list of IpAllocationParams.IpProtocol) – Specifies the IP protocols supported by the guest. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • ip_protocol (IpAllocationParams.IpProtocol) – Specifies the chosen IP protocol for this deployment. This must be one of the IP protocols supported by the guest software. See IpAllocationParams.supported_ip_protocol. This attribute is optional in the input parameters when deploying an OVF package. If None there is no IP protocol chosen. This attribute will always be present in the result when retrieving information about an OVF package.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class IpAllocationPolicy(string)

Bases: vmware.vapi.bindings.enum.Enum

The IpAllocationParams.IpAllocationPolicy class defines the possible IP allocation policy for a deployment.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the IpAllocationPolicy instance.

DHCP = IpAllocationPolicy(string='DHCP')

Specifies that DHCP will be used to allocate IP addresses.

STATIC_IPPOOL = IpAllocationPolicy(string='STATIC_IPPOOL')

Specifies that IP addresses are allocated from the range managed by an IP pool. The IP addresses are allocated at first power-on, and remain allocated at power-off. This ensures that a virtual appliance gets a consistent IP for its life-time.

STATIC_MANUAL = IpAllocationPolicy(string='STATIC_MANUAL')

Specifies that IP addresses are configured manually upon deployment, and will be kept until reconfigured or the virtual appliance destroyed. This ensures that a property gets a consistent IP for its lifetime.

TRANSIENT_IPPOOL = IpAllocationPolicy(string='TRANSIENT_IPPOOL')

Specifies that IP addresses are allocated from an IP pool. The IP addresses are allocated when needed, typically at power-on, and deallocated during power-off. There is no guarantee that a property will receive same IP address when restarted.

class IpAllocationScheme(string)

Bases: vmware.vapi.bindings.enum.Enum

The IpAllocationParams.IpAllocationScheme class defines the possible IP allocation schemes that can be supported by the guest software.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the IpAllocationScheme instance.

DHCP = IpAllocationScheme(string='DHCP')

It supports DHCP to acquire IP configuration.

OVF_ENVIRONMENT = IpAllocationScheme(string='OVF_ENVIRONMENT')

It supports setting the IP configuration through the properties provided in the OVF environment.

class IpProtocol(string)

Bases: vmware.vapi.bindings.enum.Enum

The IpAllocationParams.IpProtocol class defines the IP protocols supported by the guest software.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the IpProtocol instance.

IPV4 = IpProtocol(string='IPV4')

It supports the IPv4 protocol.

IPV6 = IpProtocol(string='IPV6')

It supports the IPv6 protocol.

class com.vmware.vcenter.ovf_client.LibraryItem(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The LibraryItem class provides methods to deploy virtual machines and virtual appliances from library items containing Open Virtualization Format (OVF) packages in content library, as well as methods to create library items in content library from virtual machines and virtual appliances.

To deploy a virtual machine or a virtual appliance from a library item:

  1. Create a LibraryItem.DeploymentTarget to specify the target deployment type and target deployment designation.

  2. Create a LibraryItem.ResourcePoolDeploymentSpec to specify the parameters for the target deployment.

  3. Use the deploy method with the created target and parameter specifications, along with the identifier of the specified source content library item. See LibraryItem.deploy().

To create a library item in content library from a virtual machine or virtual appliance:

  1. Create a LibraryItem.DeployableIdentity to specify the source virtual machine or virtual appliance to be used as the OVF template source.

  2. Create a LibraryItem.CreateTarget to specify the target library and library item.

  3. Create a LibraryItem.CreateSpec to specify the settings for the OVF package to be created.

  4. Use the create method with the created target and parameter specifications, along with the specified source entity. See LibraryItem.create().

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateResult(succeeded=None, ovf_library_item_id=None, error=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.CreateResult class defines the result of the create method. See LibraryItem.create().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • succeeded (bool) – Whether the create method completed successfully.

  • ovf_library_item_id (str or None) – Identifier of the created or updated library item. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Item. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Item. If None, the create method failed and LibraryItem.CreateResult.error will describe the error(s) that caused the failure.

  • error (LibraryItem.ResultInfo or None) – Errors, warnings, and informational messages produced by the create method. If None, no errors, warnings, or informational messages were reported by the create method.

class CreateSpec(name=None, description=None, flags=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.CreateSpec class defines the information used to create or update a library item containing an OVF package.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str or None) – Name to use in the OVF descriptor stored in the library item. If None, the server will use source’s current name.

  • description (str or None) – Description to use in the OVF descriptor stored in the library item. If None, the server will use source’s current annotation.

  • flags (list of str or None) – Flags to use for OVF package creation. The supported flags can be obtained using ExportFlag.list(). If None, no flags will be used.

class CreateTarget(library_id=None, library_item_id=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.CreateTarget class specifies the target library item when capturing a virtual machine or virtual appliance as an OVF package in a library item in a content library. The target can be an existing library item, which will be updated, creating a new version, or it can be a newly created library item in a specified library. See LibraryItem.create().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • library_id (str or None) –

    Identifier of the library in which a new library item should be created. This attribute is not used if the libraryItemId attribute is specified. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. This attribute is currently required.

    In the future, if None, the libraryItemId attribute must be specified.

  • library_item_id (str or None) – Identifier of the library item that should be should be updated. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Item. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Item. If None, a new library item will be created. The libraryId attribute must be specified if this attribute is set.

DEPLOYABLE = ['VirtualMachine', 'VirtualApp']

The types of resources that can be created by deploying an OVF package and can be captured to create a library item using the LibraryItem class.

class DeployableIdentity(type=None, id=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.DeployableIdentity class describes the resource created by a deployment, or the source resource from which library item can be created, by specifying its resource type and resource identifier.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (str) – Type of the deployable resource. When clients pass a value of this class as a parameter, the attribute must be one of VirtualMachine or VirtualApp. When methods return a value of this class as a return value, the attribute will be one of VirtualMachine or VirtualApp.

  • id (str) – Identifier of the deployable resource. When clients pass a value of this class as a parameter, the attribute must be an identifier for one of these resource types: null or null. When methods return a value of this class as a return value, the attribute will be an identifier for one of these resource types: null or null.

class DeploymentResult(succeeded=None, resource_id=None, error=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.DeploymentResult class defines the result of the deploy method. See LibraryItem.deploy().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • succeeded (bool) – Whether the deploy method completed successfully.

  • resource_id (LibraryItem.DeployableIdentity or None) – Identifier of the deployed resource entity. If None, the deploy method failed and LibraryItem.DeploymentResult.error will describe the error(s) that caused the failure.

  • error (LibraryItem.ResultInfo or None) – Errors, warnings, and informational messages produced by the deploy method. If None, no errors, warnings, or informational messages were reported by the deploy method.

class DeploymentTarget(resource_pool_id=None, host_id=None, folder_id=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.DeploymentTarget class describes the location (target) where a virtual machine or virtual appliance should be deployed. It is used in the deploy and filter methods. See LibraryItem.deploy() and LibraryItem.filter().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • resource_pool_id (str) – Identifier of the resource pool to which the virtual machine or virtual appliance should be attached. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ResourcePool. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ResourcePool.

  • host_id (str or None) – Identifier of the target host on which the virtual machine or virtual appliance will run. The target host must be a member of the cluster that contains the resource pool identified by LibraryItem.DeploymentTarget.resource_pool_id. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem. If None, the server will automatically select a target host from the resource pool if LibraryItem.DeploymentTarget.resource_pool_id is a stand-alone host or a cluster with Distributed Resource Scheduling (DRS) enabled.

  • folder_id (str or None) – Identifier of the vCenter folder that should contain the virtual machine or virtual appliance. The folder must be virtual machine folder. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Folder. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Folder. If None, the server will choose the deployment folder.

class OvfSummary(name=None, annotation=None, eulas=None, networks=None, storage_groups=None, additional_params=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.OvfSummary class defines the result of the filter method. See LibraryItem.filter(). The attributes in the class describe parameterizable information in the OVF descriptor, with respect to a deployment target, for the deploy method. See LibraryItem.deploy().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str or None) – Default name for the virtual machine or virtual appliance. If None, the OVF descriptor did not specify a name.

  • annotation (str or None) – Default annotation for the virtual machine or virtual appliance. If None, the OVF descriptor did not specify an annotation.

  • eulas (list of str) – End User License Agreements specified in the OVF descriptor. All end user license agreements must be accepted in order for the deploy method to succeed. See LibraryItem.ResourcePoolDeploymentSpec.accept_all_eula.

  • networks (list of str or None) – Section identifiers for sections of type ovf:NetworkSection in the OVF descriptor. These identifiers can be used as keys in LibraryItem.ResourcePoolDeploymentSpec.network_mappings. If None, the OVF descriptor did not specify any networks.

  • storage_groups (list of str or None) – Section identifiers for sections of type vmw:StorageGroupSection in the OVF descriptor. These identifiers can be used as keys in LibraryItem.ResourcePoolDeploymentSpec.storage_mappings. If None, the OVF descriptor did not specify any storage groups.

  • additional_params (list of vmware.vapi.struct.VapiStruct or None) – Additional OVF parameters which can be specified for the deployment target. These OVF parameters can be inspected, optionally modified, and used as values in LibraryItem.ResourcePoolDeploymentSpec.additional_parameters for the deploy method. When clients pass a value of this class as a parameter, the attribute must contain all the attributes defined in OvfParams. When methods return a value of this class as a return value, the attribute will contain all the attributes defined in OvfParams. If None, the OVF descriptor does not require addtional parameters or does not have additional parameters suitable for the deployment target.

class ResourcePoolDeploymentSpec(name=None, annotation=None, accept_all_eula=None, network_mappings=None, storage_mappings=None, storage_provisioning=None, storage_profile_id=None, locale=None, flags=None, additional_parameters=None, default_datastore_id=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.ResourcePoolDeploymentSpec class defines the deployment parameters that can be specified for the deploy method where the deployment target is a resource pool. See LibraryItem.deploy().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str or None) – Name assigned to the deployed target virtual machine or virtual appliance. If None, the server will use the name from the OVF package.

  • annotation (str or None) – Annotation assigned to the deployed target virtual machine or virtual appliance. If None, the server will use the annotation from the OVF package.

  • accept_all_eula (bool) – Whether to accept all End User License Agreements. See LibraryItem.OvfSummary.eulas.

  • network_mappings ((dict of str and str) or None) – Specification of the target network to use for sections of type ovf:NetworkSection in the OVF descriptor. The key in the dict is the section identifier of the ovf:NetworkSection section in the OVF descriptor and the value is the target network to be used for deployment. When clients pass a value of this class as a parameter, the value in the attribute dict must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the value in the attribute dict will be an identifier for the resource type: Network. If None, the server will choose a network mapping.

  • storage_mappings ((dict of str and LibraryItem.StorageGroupMapping) or None) – Specification of the target storage to use for sections of type vmw:StorageGroupSection in the OVF descriptor. The key in the dict is the section identifier of the ovf:StorageGroupSection section in the OVF descriptor and the value is the target storage specification to be used for deployment. See LibraryItem.StorageGroupMapping. If None, the server will choose a storage mapping.

  • storage_provisioning (DiskProvisioningType or None) – Default storage provisioning type to use for all sections of type vmw:StorageSection in the OVF descriptor. If None, the server will choose the provisioning type.

  • storage_profile_id (str or None) – Default storage profile to use for all sections of type vmw:StorageSection in the OVF descriptor. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: StorageProfile. If None, the server will choose the default profile.

  • locale (str or None) – The locale to use for parsing the OVF descriptor. If None, the server locale will be used.

  • flags (list of str or None) – Flags to be use for deployment. The supported flag values can be obtained using ImportFlag.list(). If None, no flags will be used.

  • additional_parameters (list of vmware.vapi.struct.VapiStruct or None) –

    Additional OVF parameters that may be needed for the deployment. Additional OVF parameters may be required by the OVF descriptor of the OVF package in the library item. Examples of OVF parameters that can be specified through this attribute include, but are not limited to:

    When clients pass a value of this class as a parameter, the attribute must contain all the attributes defined in OvfParams. When methods return a value of this class as a return value, the attribute will contain all the attributes defined in OvfParams. If None, the server will choose default settings for all parameters necessary for the deploy method. See LibraryItem.deploy().

  • default_datastore_id (str or None) – Default datastore to use for all sections of type vmw:StorageSection in the OVF descriptor. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore. If None, the server will choose the default datastore.

class ResultInfo(errors=None, warnings=None, information=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.ResultInfo class defines the information returned along with the result of a create or deploy method to describe errors, warnings, and informational messages produced by the server.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • errors (list of OvfError) – Errors reported by the create or deploy method. These errors would have prevented the create or deploy method from completing successfully.

  • warnings (list of OvfWarning) – Warnings reported by the create or deploy method. These warnings would not have prevented the create or deploy method from completing successfully, but there might be issues that warrant attention.

  • information (list of OvfInfo) – Information messages reported by the create or deploy method. For example, a non-required parameter was ignored.

class StorageGroupMapping(type=None, datastore_id=None, storage_profile_id=None, provisioning=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.StorageGroupMapping class defines the storage deployment target and storage provisioning type for a section of type vmw:StorageGroupSection in the OVF descriptor.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (LibraryItem.StorageGroupMapping.Type) – Type of storage deployment target to use for the vmw:StorageGroupSection section. The specified value must be LibraryItem.StorageGroupMapping.Type.DATASTORE or LibraryItem.StorageGroupMapping.Type.STORAGE_PROFILE.

  • datastore_id (str) – Target datastore to be used for the storage group. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore. This attribute is optional and it is only relevant when the value of type is LibraryItem.StorageGroupMapping.Type.DATASTORE.

  • storage_profile_id (str) – Target storage profile to be used for the storage group. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: StorageProfile. This attribute is optional and it is only relevant when the value of type is LibraryItem.StorageGroupMapping.Type.STORAGE_PROFILE.

  • provisioning (DiskProvisioningType or None) – Target provisioning type to use for the storage group. If None, LibraryItem.ResourcePoolDeploymentSpec.storage_provisioning will be used.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The LibraryItem.StorageGroupMapping.Type class defines the supported types of storage targets for sections of type vmw:StorageGroupSection in the OVF descriptor.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

DATASTORE = Type(string='DATASTORE')

Storage deployment target is a datastore.

STORAGE_PROFILE = Type(string='STORAGE_PROFILE')

Storage deployment target is a storage profile.

create(source, target, create_spec, client_token=None)

Creates a library item in content library from a virtual machine or virtual appliance.

This method creates a library item in content library whose content is an OVF package derived from a source virtual machine or virtual appliance, using the supplied create specification. The OVF package may be stored as in a newly created library item or in an in an existing library item. For an existing library item whose content is updated by this method, the original content is overwritten. Meta data such as name and description is not updated for the exisitng library item.

Parameters
  • client_token (str or None) – Client-generated token used to retry a request if the client fails to get a response from the server. If the original request succeeded, the result of that request will be returned, otherwise the operation will be retried. If None, the server will create a token.

  • source (LibraryItem.DeployableIdentity) – Identifier of the virtual machine or virtual appliance to use as the source.

  • target (LibraryItem.CreateTarget) – Specification of the target content library and library item.

  • create_spec (LibraryItem.CreateSpec) – Information used to create the OVF package from the source virtual machine or virtual appliance.

Return type

LibraryItem.CreateResult

Returns

Information about the success or failure of the method, along with the details of the result or failure.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if create_spec contains invalid arguments.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if source describes an unexpected resource type.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine or virtual appliance specified by source does not exist.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library or library item specified by target does not exist.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the operation cannot be performed because of the specified virtual machine or virtual appliance’s current state. For example, if the virtual machine configuration information is not available, or if the virtual appliance is running.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if there was an error accessing a file from the source virtual machine or virtual appliance.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the specified virtual machine or virtual appliance is busy.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource null or null referenced by the attribute LibraryItem.DeployableIdentity.id requires VApp.Export.

  • The resource com.vmware.content.Library referenced by the attribute LibraryItem.CreateTarget.library_id requires ContentLibrary.AddLibraryItem.

  • The resource com.vmware.content.library.Item referenced by the attribute LibraryItem.CreateTarget.library_item_id requires System.Read.

deploy(ovf_library_item_id, target, deployment_spec, client_token=None)

Deploys an OVF package stored in content library to a newly created virtual machine or virtual appliance.

This method deploys an OVF package which is stored in the library item specified by ovf_library_item_id. It uses the deployment specification in deployment_spec to deploy the OVF package to the location specified by target.

Parameters
  • client_token (str or None) – Client-generated token used to retry a request if the client fails to get a response from the server. If the original request succeeded, the result of that request will be returned, otherwise the operation will be retried. If None, the server will create a token.

  • ovf_library_item_id (str) – Identifier of the content library item containing the OVF package to be deployed. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

  • target (LibraryItem.DeploymentTarget) – Specification of the deployment target.

  • deployment_spec (LibraryItem.ResourcePoolDeploymentSpec) – Specification of how the OVF package should be deployed to the target.

Return type

LibraryItem.DeploymentResult

Returns

Information about the success or failure of the method, along with the details of the result or failure.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if target contains invalid arguments.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if deployment_spec contains invalid arguments or has attributes that are inconsistent with target.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item specified by ovf_library_item_id does not exist.

Raise

com.vmware.vapi.std.errors_client.NotFound if any resource specified by a attribute of the LibraryItem.DeploymentTarget class, specified by target, does not exist.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if there was an error accessing the OVF package stored in the library item specified by ovf_library_item_id.

Raise
com.vmware.vapi.std.errors_client.Unauthorized

if you do not have all of the privileges described as follows :

  • Method execution requires VirtualMachine.Config.AddNewDisk if the OVF descriptor has a disk drive (type 17) section.

  • Method execution requires VirtualMachine.Config.AdvancedConfig if the OVF descriptor has an ExtraConfig section.

  • Method execution requires Extension.Register for specified resource group if the OVF descriptor has a vServiceDependency section.

  • Method execution requires Network.Assign for target network if specified.

  • Method execution requires Datastore.AllocateSpace for target datastore if specified.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource com.vmware.content.library.Item referenced by the parameter ovf_library_item_id requires System.Read.

  • The resource HostSystem referenced by the attribute LibraryItem.DeploymentTarget.host_id requires System.Read.

  • The resource Network referenced by the dict value of attribute LibraryItem.ResourcePoolDeploymentSpec.network_mappings requires System.Read.

  • The resource StorageProfile referenced by the attribute LibraryItem.ResourcePoolDeploymentSpec.storage_profile_id requires System.Read.

  • The resource Datastore referenced by the attribute LibraryItem.ResourcePoolDeploymentSpec.default_datastore_id requires System.Read.

  • The resource ResourcePool referenced by the attribute LibraryItem.DeploymentTarget.resource_pool_id requires VApp.Import.

  • The resource Folder referenced by the attribute LibraryItem.DeploymentTarget.folder_id requires VApp.Import.

filter(ovf_library_item_id, target)

Queries an OVF package stored in content library to retrieve information to use when deploying the package. See LibraryItem.deploy().

This method retrieves information from the descriptor of the OVF package stored in the library item specified by ovf_library_item_id. The information returned by the method can be used to populate the deployment specification (see LibraryItem.ResourcePoolDeploymentSpec when deploying the OVF package to the deployment target specified by target.

Parameters
  • ovf_library_item_id (str) – Identifier of the content library item containing the OVF package to query. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

  • target (LibraryItem.DeploymentTarget) – Specification of the deployment target.

Return type

LibraryItem.OvfSummary

Returns

Information that can be used to populate the deployment specification (see LibraryItem.ResourcePoolDeploymentSpec) when deploying the OVF package to the deployment target specified by target.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if target contains invalid arguments.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item specified by ovf_library_item_id does not exist.

Raise

com.vmware.vapi.std.errors_client.NotFound if any resource specified by a attribute of the LibraryItem.DeploymentTarget class, specified by target, does not exist.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if there was an error accessing the OVF package at the specified ovf_library_item_id.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource com.vmware.content.library.Item referenced by the parameter ovf_library_item_id requires System.Read.

  • The resource ResourcePool referenced by the attribute LibraryItem.DeploymentTarget.resource_pool_id requires System.Read.

  • The resource HostSystem referenced by the attribute LibraryItem.DeploymentTarget.host_id requires System.Read.

  • The resource Folder referenced by the attribute LibraryItem.DeploymentTarget.folder_id requires System.Read.

class com.vmware.vcenter.ovf_client.OvfError(category=None, issues=None, name=None, value=None, message=None, error=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The OvfError class describes an error related to accessing, validating, deploying, or exporting an OVF package.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class com.vmware.vcenter.ovf_client.OvfInfo(messages=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The OvfInfo class contains informational messages related to accessing, validating, deploying, or exporting an OVF package.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

messages (list of com.vmware.vapi.std_client.LocalizableMessage) – A list of localizable messages (see com.vmware.vapi.std_client.LocalizableMessage).

class com.vmware.vcenter.ovf_client.OvfMessage(category=None, issues=None, name=None, value=None, message=None, error=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The OvfMessage class describes a base OVF handling error message related to accessing, validating, deploying, or exporting an OVF package.

These messages fall into different categories defined in OvfMessage.Category:

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class Category(string)

Bases: vmware.vapi.bindings.enum.Enum

The OvfMessage.Category class defines the categories of messages (see OvfMessage).

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Category instance.

INPUT = Category(string='INPUT')

The user provided input parameters are invalid.

SERVER = Category(string='SERVER')

Server error.

VALIDATION = Category(string='VALIDATION')

The OVF descriptor is invalid, for example, syntax errors or schema errors.

class com.vmware.vcenter.ovf_client.OvfParams(type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The OvfParams class defines the common attributes for all OVF deployment parameters. OVF parameters serve several purposes:

  • Describe information about a given OVF package.

  • Describe default deployment configuration.

  • Describe possible deployment values based on the deployment environment.

  • Provide deployment-specific configuration.

Each OVF parameters class specifies a particular configurable aspect of OVF deployment. An aspect has both a query-model and a deploy-model. The query-model is used when the OVF package is queried, and the deploy-model is used when deploying an OVF package.

Most OVF parameter classes provide both informational and deployment parameters. However, some are purely informational (for example, download size) and some are purely deployment parameters (for example, the flag to indicate whether registration as a vCenter extension is accepted).

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.OvfWarning(category=None, issues=None, name=None, value=None, message=None, error=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The OvfWarning class describes a warning related to accessing, validating, deploying, or exporting an OVF package.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class com.vmware.vcenter.ovf_client.ParseIssue(category=None, file=None, line_number=None, column_number=None, message=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ParseIssue class contains the information about the issue found when parsing an OVF package during deployment or exporting an OVF package including:

  • Parsing and validation error on OVF descriptor (which is an XML document), manifest and certificate files.

  • OVF descriptor generating and device error.

  • Unexpected server error.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • category (ParseIssue.Category) – The category of the parse issue.

  • file (str) – The name of the file in which the parse issue was found.

  • line_number (long) – The line number of the line in the file (see ParseIssue.file) where the parse issue was found (or -1 if not applicable).

  • column_number (long) – The position in the line (see ParseIssue.line_number) (or -1 if not applicable).

  • message (com.vmware.vapi.std_client.LocalizableMessage) – A localizable message describing the parse issue.

class Category(string)

Bases: vmware.vapi.bindings.enum.Enum

The ParseIssue.Category class defines the categories of issues that can be found when parsing files inside an OVF package (see ParseIssue) including OVF descriptor (which is an XML document), manifest and certificate files, or exporting an OVF package.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Category instance.

ATTRIBUTE_ILLEGAL = Category(string='ATTRIBUTE_ILLEGAL')

Illegal attribute error. It indicates that an illegal attribute is set for an element in the OVF descriptor. For example, empty disks do not use format, parentRef, and populatedSize attributes, if these attributes are present in an empty disk element then will get this pasrse issue.

ATTRIBUTE_REQUIRED = Category(string='ATTRIBUTE_REQUIRED')

Required attribute error. It indicates that a required attribute is missing from an element in the OVF descriptor.

ELEMENT_ILLEGAL = Category(string='ELEMENT_ILLEGAL')

Illegal element error. It indicates that an element is present in a location which is not allowed, or found multiple elements but only one is allowed at the location in the OVF descriptor.

ELEMENT_REQUIRED = Category(string='ELEMENT_REQUIRED')

Required element error. It indicates that a required element is missing from the OVF descriptor.

ELEMENT_UNKNOWN = Category(string='ELEMENT_UNKNOWN')

Unknown element error. It indicates that an element is unsupported when parsing an OVF descriptor.

EXPORT_ERROR = Category(string='EXPORT_ERROR')

Issue during OVF export, for example, malformed deviceId, controller not found, or file backing for a device not found.

GENERATE_ERROR = Category(string='GENERATE_ERROR')

OVF descriptor (which is an XML document) generating error, for example, well-formedness errors as well as unexpected processing conditions.

INTERNAL_ERROR = Category(string='INTERNAL_ERROR')

Server encountered an unexpected error which prevented it from fulfilling the request.

PARSE_ERROR = Category(string='PARSE_ERROR')

OVF package parsing error, including:

  • OVF descriptor parsing errors, for example, syntax errors or schema errors.

  • Manifest file parsing and verification errors.

  • Certificate file parsing and verification errors.

SECTION_RESTRICTION = Category(string='SECTION_RESTRICTION')

Section restriction error. It indicates that a section appears in place in the OVF descriptor where it is not allowed, a section appears fewer times than is required, or a section appears more times than is allowed.

SECTION_UNKNOWN = Category(string='SECTION_UNKNOWN')

Section unknown error. It indicates that a section is unsupported when parsing an OVF descriptor.

VALIDATION_ERROR = Category(string='VALIDATION_ERROR')

An issue with the manifest and signing.

VALUE_ILLEGAL = Category(string='VALUE_ILLEGAL')

Illegal value error. For example, the value is malformed, not a number, or outside of the given range, and so on.

class com.vmware.vcenter.ovf_client.Property(class_id=None, id=None, instance_id=None, category=None, ui_optional=None, label=None, description=None, type=None, value=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Property class contains the information about a property in an OVF package.

A property is uniquely identified by its [classid.]id[.instanceid] fully-qualified name (see Property.class_id, Property.id, and Property.instance_id). If multiple properties in an OVF package have the same fully-qualified name, then the property is excluded and cannot be set. We do warn about this during import.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • class_id (str) – The classId of this OVF property. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • id (str) – The identifier of this OVF property. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • instance_id (str) – The instanceId of this OVF property. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • category (str) – If this is set to a non-empty string, this property starts a new category. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package. If None, the property is in the same category as the previous item, otherwise, it starts a new category.

  • ui_optional (bool) –

    Whether a category is UI optional. This is only used if this property starts a new category (see Property.category).

    The value is stored in an optional attribute vmw:uioptional to the ovf:Category element. The default value is false. If this value is true, the properties within this category are optional. The UI renders this as a group with a check box, and the group is grayed out until the check box is selected. When the check box is selected, the input values are read and used in deployment. If properties within the same category specify conflicting values the default is used. Only implemented in vSphere Web Client 5.1 and later as of Nov 2012. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package.

  • label (str) – The display name of this OVF property. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • description (str) – A description of this OVF property. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package.

  • type (str) – The type of this OVF property. Refer to the configuration of a virtual appliance/virtual machine for the valid values. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • value (str) – The OVF property value. This contains the default value from ovf:defaultValue if ovf:value is not present when read. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.PropertyParams(properties=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The PropertyParams class contains a list of OVF properties that can be configured when the OVF package is deployed.

This is based on the ovf:ProductSection.

See LibraryItem.deploy() and LibraryItem.filter().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • properties (list of Property) – list of OVF properties. This attribute is optional in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.ScaleOutGroup(id=None, description=None, instance_count=None, minimum_instance_count=None, maximum_instance_count=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ScaleOutGroup class contains information about a scale-out group.

It allows a virtual system collection to contain a set of children that are homogeneous with respect to a prototypical virtual system or virtual system collection. It shall cause the deployment function to replicate the prototype a number of times, thus allowing the number of instantiated virtual systems to be configured dynamically at deployment time.

This is based on the ovf2:ScaleOutSection.

See LibraryItem.deploy() and LibraryItem.filter().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (str) – The identifier of the scale-out group. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • description (str) – The description of the scale-out group. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • instance_count (long) – The scaling factor to use. It defines the number of replicas of the prototypical virtual system or virtual system collection. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • minimum_instance_count (long) – The minimum scaling factor. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package. This will be 1 if there is no explicit limit.

  • maximum_instance_count (long) – The maximum scaling factor. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package. This will be None if there is no explicit limit.

class com.vmware.vcenter.ovf_client.ScaleOutParams(groups=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ScaleOutParams class contains information about the scale-out groups described in the OVF package.

When deploying an OVF package, a deployment specific instance count can be specified (see ScaleOutGroup.instance_count.

This is based on the ovf2:ScaleOutSection.

See LibraryItem.deploy() and LibraryItem.filter().

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • groups (list of ScaleOutGroup) – The list of scale-out groups. This attribute is optional in the input parameters when deploying an OVF package. If None there are no scale-out groups. This attribute will always be present in the result when retrieving information about an OVF package.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.SizeParams(approximate_download_size=None, approximate_flat_deployment_size=None, approximate_sparse_deployment_size=None, variable_disk_size=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SizeParams class contains estimates of the download and deployment sizes.

This information is based on the file references and the ovf:DiskSection in the OVF descriptor.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • approximate_download_size (long) –

    A best guess as to the total amount of data that must be transferred to download the OVF package.

    This may be inaccurate due to disk compression etc.

    This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package. It will be None if there is insufficient information to provide a proper estimate.

  • approximate_flat_deployment_size (long) – A best guess as to the total amount of space required to deploy the OVF package if using flat disks. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package. It will be None if there is insufficient information to provide a proper estimate.

  • approximate_sparse_deployment_size (long) – A best guess as to the total amount of space required to deploy the OVF package using sparse disks. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package. It will be None if there is insufficient information to provide a proper estimate.

  • variable_disk_size (bool) –

    Whether the OVF uses variable disk sizes.

    For empty disks, rather than specifying a fixed virtual disk capacity, the capacity may be given using a reference to a ovf:Property element in a ovf:ProductSection element in OVF package. This attribute is not used in the input parameters when deploying an OVF package. This attribute is optional in the result when retrieving information about an OVF package. If None or false, the OVF does not use variable disk sizes.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.ovf_client.UnknownSection(tag=None, info=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The UnknownSection class contains information about an unknown section in an OVF package.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • tag (str) – A namespace-qualified tag in the form {ns}tag.

  • info (str) – The description of the Info element.

class com.vmware.vcenter.ovf_client.UnknownSectionParams(unknown_sections=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The UnknownSectionParams class contains a list of unknown, non-required sections.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • unknown_sections (list of UnknownSection) – list of unknown, non-required sections. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.VcenterExtensionParams(required=None, registration_accepted=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The VcenterExtensionParams class specifies that the OVF package should be registered as a vCenter extension. The virtual machine or virtual appliance will gain unrestricted access to the vCenter Server APIs. It must be connected to a network with connectivity to the vCenter server.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • required (bool) – Whether registration as a vCenter extension is required. This attribute is not used in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • registration_accepted (bool) –

    Whether registration as a vCenter extension is accepted.

    If registration as a vCenter extension is required (see VcenterExtensionParams.required), this must be set to true during deployment. Defaults to false when returned from server. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

  • type (str) – Unique identifier describing the type of the OVF parameters. The value is the name of the OVF parameters class. This attribute must be provided in the input parameters when deploying an OVF package. This attribute will always be present in the result when retrieving information about an OVF package.

class com.vmware.vcenter.ovf_client.WarningInfo(type=None, message=None, ignored=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The WarningInfo class provides information about the warnings which are raised during the OVF package deployment. This class was added in vSphere API 7.0.2.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (WarningType) – The warning type raised during the OVF package deployment. This attribute was added in vSphere API 7.0.2.0.

  • message (com.vmware.vapi.std_client.LocalizableMessage) – The message specifying more details about the warning. This attribute was added in vSphere API 7.0.2.0.

  • ignored (bool) –

    Indicates if this warning will be ignored when deploying the OVF package.

    The value is set to be false when it is returned from LibraryItem.filter(), it should be updated to be true when calling LibraryItem.deploy() if the warning can be ignored, otherwise the OVF package deployment will fail.. This attribute was added in vSphere API 7.0.2.0.

class com.vmware.vcenter.ovf_client.WarningType(string)

Bases: vmware.vapi.bindings.enum.Enum

The WarningType class defines the warnings which can be raised during the OVF package deployment. This enumeration was added in vSphere API 7.0.2.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the WarningType instance.

EXPIRED_CERTIFICATE = WarningType(string='EXPIRED_CERTIFICATE')

The certificate used for signing the OVF package content is expired. This class attribute was added in vSphere API 7.0.2.0.

NOT_YET_VALID_CERTIFICATE = WarningType(string='NOT_YET_VALID_CERTIFICATE')

The certificate used for signing the OVF package content is not yet valid. This class attribute was added in vSphere API 7.0.2.0.

SELF_SIGNED_CERTIFICATE = WarningType(string='SELF_SIGNED_CERTIFICATE')

The certificate used for signing the OVF package content is self-signed. This class attribute was added in vSphere API 7.0.2.0.

UNTRUSTED_CERTIFICATE = WarningType(string='UNTRUSTED_CERTIFICATE')

The certificate used for signing the OVF package content is not trusted. This class attribute was added in vSphere API 7.0.2.0.

com.vmware.vcenter.services_client module

class com.vmware.vcenter.services_client.Service(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Service class provides methods to manage a single/set of vCenter Server services. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Health(string)

Bases: vmware.vapi.bindings.enum.Enum

The Service.Health class defines the possible values for health of a service. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Health instance.

DEGRADED = Health(string='DEGRADED')

Service is in degraded state, it is not functional. This class attribute was added in vSphere API 6.7.

HEALTHY = Health(string='HEALTHY')

Service is in a healthy state and is fully functional. This class attribute was added in vSphere API 6.7.

HEALTHY_WITH_WARNINGS = Health(string='HEALTHY_WITH_WARNINGS')

Service is healthy with warnings. This class attribute was added in vSphere API 6.7.

class Info(name_key=None, description_key=None, startup_type=None, state=None, health=None, health_messages=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Service.Info class contains information about a service. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name_key (str) – Service name key. Can be used to lookup resource bundle. This attribute was added in vSphere API 6.7.

  • description_key (str) – Service description key. Can be used to lookup resource bundle. This attribute was added in vSphere API 6.7.

  • startup_type (Service.StartupType) – Startup Type. This attribute was added in vSphere API 6.7.

  • state (Service.State) – Running State. This attribute was added in vSphere API 6.7.

  • health (Service.Health) – Health of service. This attribute was added in vSphere API 6.7. This attribute is optional and it is only relevant when the value of state is Service.State.STARTED.

  • health_messages (list of com.vmware.vapi.std_client.LocalizableMessage) – Localizable messages associated with the health of the service. This attribute was added in vSphere API 6.7. This attribute is optional and it is only relevant when the value of state is Service.State.STARTED.

class StartupType(string)

Bases: vmware.vapi.bindings.enum.Enum

The Service.StartupType class defines valid Startup Type for vCenter Server services. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the StartupType instance.

AUTOMATIC = StartupType(string='AUTOMATIC')

Service Startup type is Automatic, thus during starting all services or issuing explicit start on the service will start it. This class attribute was added in vSphere API 6.7.

DISABLED = StartupType(string='DISABLED')

Service Startup type is Disabled, thus it will not start unless the startup type changes to manual or automatic. This class attribute was added in vSphere API 6.7.

MANUAL = StartupType(string='MANUAL')

Service Startup type is Manual, thus issuing an explicit start on the service will start it. This class attribute was added in vSphere API 6.7.

class State(string)

Bases: vmware.vapi.bindings.enum.Enum

The Service.State class defines valid Run State for services. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the State instance.

STARTED = State(string='STARTED')

Service Run State is Started, it is fully functional. This class attribute was added in vSphere API 6.7.

STARTING = State(string='STARTING')

Service Run State is Starting, it is still not functional. This class attribute was added in vSphere API 6.7.

STOPPED = State(string='STOPPED')

Service Run State is Stopped. This class attribute was added in vSphere API 6.7.

STOPPING = State(string='STOPPING')

Service Run State is Stopping, it is not functional. This class attribute was added in vSphere API 6.7.

class UpdateSpec(startup_type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Service.UpdateSpec class describes the changes to be made to the configuration of the service. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

startup_type (Service.StartupType or None) – Startup Type. This attribute was added in vSphere API 6.7. If unspecified, leaves value unchanged.

get(service)

Returns the state of a service. This method was added in vSphere API 6.7.

Parameters

service (str) – identifier of the service whose state is being queried. The parameter must be an identifier for the resource type: com.vmware.vcenter.services.Service.

Return type

Service.Info

Returns

Service Info structure.

Raise

com.vmware.vapi.std.errors_client.NotFound if the service associated with service does not exist.

Raise

com.vmware.vapi.std.errors_client.Error if any other error occurs during the execution of the operation.

list_details()

Lists details of vCenter services. This method was added in vSphere API 6.7.

Return type

dict of str and Service.Info

Returns

Map of service identifiers to service Info structures. The key in the return value dict will be an identifier for the resource type: com.vmware.vcenter.services.Service.

Raise

com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

restart(service)

Restarts a service. This method was added in vSphere API 6.7.

Parameters

service (str) – identifier of the service to restart The parameter must be an identifier for the resource type: com.vmware.vcenter.services.Service.

Raise

com.vmware.vapi.std.errors_client.NotFound if the service associated with service does not exist.

Raise

com.vmware.vapi.std.errors_client.TimedOut if any timeout occurs during the execution of the restart operation.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the operation is denied in the current state of the service. If a stop or start operation is in progress, issuing a restart operation will lead to this error.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if a restart operation is issued on a service which has startup type Service.StartupType.DISABLED

Raise

com.vmware.vapi.std.errors_client.Error if any other error occurs during the execution of the operation.

start(service)

Starts a service. This method was added in vSphere API 6.7.

Parameters

service (str) – identifier of the service to start The parameter must be an identifier for the resource type: com.vmware.vcenter.services.Service.

Raise

com.vmware.vapi.std.errors_client.NotFound if the service associated with service does not exist.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the operation is denied in the current state of the service. If a stop or restart operation is in progress, the start operation will not be allowed.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if start operation is issued on a service which has startup type Service.StartupType.DISABLED.

Raise

com.vmware.vapi.std.errors_client.TimedOut if any timeout occurs during the execution of the start operation. Timeout occurs when the service takes longer than StartTimeout to start.

Raise

com.vmware.vapi.std.errors_client.Error if any other error occurs during the execution of the operation.

stop(service)

Stops a service. This method was added in vSphere API 6.7.

Parameters

service (str) – identifier of the service to stop The parameter must be an identifier for the resource type: com.vmware.vcenter.services.Service.

Raise

com.vmware.vapi.std.errors_client.NotFound if the service associated with service does not exist.

Raise

com.vmware.vapi.std.errors_client.Error if any other error occurs during the execution of the operation.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the operation is denied in the current state of the service. If a stop operation is in progress, issuing another stop operation will lead to this error.

update(service, spec)

Updates the properties of a service. This method was added in vSphere API 6.7.

Parameters
  • service (str) – identifier of the service whose properties are being updated. The parameter must be an identifier for the resource type: com.vmware.vcenter.services.Service.

  • spec (Service.UpdateSpec) – Service Update specification.

Raise

com.vmware.vapi.std.errors_client.NotFound if the service associated with service does not exist.

Raise

com.vmware.vapi.std.errors_client.Error if any other error occurs during the execution of the operation.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the operation is denied in the current state of the service. If a start, stop or restart operation is in progress, update operation will fail with this error.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if a request to set the Service.UpdateSpec.startup_type attribute of spec to Service.StartupType.DISABLED comes in for a service that is not in Service.State.STOPPED state.

class com.vmware.vcenter.services_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.storage_client module

class com.vmware.vcenter.storage_client.Policies(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Policies class provides methods for managing the storage policies. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CompatibilityInfo(compatible_datastores=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Policies.CompatibilityInfo class contains info about a list of datastores compatible with a specific storage policy. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

compatible_datastores (list of Policies.CompatibleDatastoreInfo) – Info about a list of datastores compatible with a specific storage policy. This attribute was added in vSphere API 6.7.

class CompatibleDatastoreInfo(datastore=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Policies.CompatibleDatastoreInfo class contains compatible datastore’s information. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

datastore (str) – Identifier of the datastore. This attribute was added in vSphere API 6.7. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore.

class FilterSpec(policies=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Policies.FilterSpec class contains attributes used to filter the results when listing the storage policies (see Policies.list()). This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

policies (set of str or None) – Identifiers of storage policies that can match the filter. This attribute was added in vSphere API 6.7. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.StoragePolicy. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.StoragePolicy. If None or empty, storage policies with any identifiers match the filter.

RESOURCE_TYPE = 'com.vmware.vcenter.StoragePolicy'

Resource type for vAPI metadata policy. This class attribute was added in vSphere API 6.7.

class Summary(policy=None, name=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Policies.Summary class contains commonly used information about a storage policy. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • policy (str) – Identifier of the storage policy. This attribute was added in vSphere API 6.7. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.StoragePolicy. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.StoragePolicy.

  • name (str) – Name of the storage policy. This attribute was added in vSphere API 6.7.

  • description (str) – Description of the storage policy. This attribute was added in vSphere API 6.7.

check_compatibility(policy, datastores)

Returns datastore compatibility summary about a specific storage policy. This method was added in vSphere API 6.7.

Parameters
  • policy (str) – The storage policy identifier The parameter must be an identifier for the resource type: com.vmware.vcenter.StoragePolicy.

  • datastores (set of str) – Datastores used to check compatibility against a storage policy. The number of datastores is limited to 1024. The parameter must contain identifiers for the resource type: Datastore.

Return type

Policies.CompatibilityInfo

Returns

datastore compatibility summary about a specific storage policy.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the storage policy specified does not exist.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if input more than 1024 datastores.

list(filter=None)

Returns information about at most 1024 visible (subject to permission checks) storage solicies availabe in vCenter. These storage policies can be used for provisioning virtual machines or disks. This method was added in vSphere API 6.7.

Parameters

filter (Policies.FilterSpec or None) – Specification of matching storage policies for which information should be returned. If None, the behavior is equivalent to a Policies.FilterSpec with all attributes None which means all storage policies match the filter

Return type

list of Policies.Summary

Returns

Commonly used Information about the storage policies.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the Policies.FilterSpec contains a value that is not supported by the server.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if more than 1024 storage policies exist.

class com.vmware.vcenter.storage_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.system_config_client module

class com.vmware.vcenter.system_config_client.DeploymentType(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The DeploymentType class provides methods to get/set the type of the appliance. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DeploymentType.Info class contains the fields used to get the appliance type. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

type (com.vmware.vcenter.deployment_client.ApplianceType) – The type of the appliance. This attribute was added in vSphere API 6.7.

class ReconfigureSpec(type=None, remote_psc=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DeploymentType.ReconfigureSpec class contains the fields used to get and set the appliance type. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
get()

Get the type of the vCenter appliance. This method was added in vSphere API 6.7.

Return type

DeploymentType.Info

Returns

The type of the vCenter appliance.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if appliance is not in CONFIGURED state.

reconfigure(spec)

Reconfigure the type of the vCenter appliance. This method was added in vSphere API 6.7.

Parameters

spec (DeploymentType.ReconfigureSpec) – ReconfigureSpec to set the appliance type.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the appliance is in CONFIGURED state and if not changing the type from VCSA_EMBEDDED to VCSA_EXTERNAL.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if external PSC credentials are not valid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is not in INITIALIZED or CONFIGURED state.

class com.vmware.vcenter.system_config_client.PscRegistration(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The PscRegistration class provides methods to get and set the PSC_EXTERNAL appliance a VCSA_EXTERNAL appliance is registered with. This class was added in vSphere API 6.7.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(address=None, https_port=None, sso_domain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The PscRegistration.Info class has fields to specify information about the PSC node. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – The IP address or DNS resolvable name of the PSC this appliance is registered with. This attribute was added in vSphere API 6.7.

  • https_port (long) – The HTTPs port used by the external PSC. This attribute was added in vSphere API 6.7.

  • sso_domain (str) – The Single Sign-On domain name of the external PSC. This attribute was added in vSphere API 6.7.

get()

Get information of the PSC that this appliance is registered with. This method was added in vSphere API 6.7.

Return type

PscRegistration.Info

Returns

Info structure containing information about the external PSC node this appliance is registered with.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is in NOT_INITIALIZED state.

repoint(spec)

Repoint this vCenter Server appliance to a different external PSC. This method was added in vSphere API 6.7.

Parameters

spec (com.vmware.vcenter.deployment_client.RemotePscSpec) – RemotePscSpec structure containing information about the external PSC node to repoint this vCenter Server appliance to.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the caller is not authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the passed external PSC credentials is invalid.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the passed external PSC is not a replicating with the current PSC this appliance is registered with.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if passed arguments are invalid.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the current appliance is not of the type VCSA_EXTERNAL.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the appliance is NOT in CONFIGURED state.

class com.vmware.vcenter.system_config_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.tagging_client module

The com.vmware.vcenter.tagging_client module provides classes for managing tags.

class com.vmware.vcenter.tagging_client.Associations(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Associations class provides methods to list tag associations. This class was added in vSphere API 7.0.0.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class IterationSpec(marker=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Associations.IterationSpec class contains attributes used to break results into pages when listing tags associated to objects see Associations.list()). This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

marker (str or None) – Marker is an opaque token that allows the caller to request the next page of tag associations. This attribute was added in vSphere API 7.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.tagging.associations.Marker. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.tagging.associations.Marker. If None or empty, first page of tag associations will be returned.

class LastIterationStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The last status for the iterator. A field of this type is returned as part of the result and indicates to the caller of the API whether it can continue to make requests for more data.

The last status only reports on the state of the iteration at the time data was last returned. As a result, it not does guarantee if the next call will succeed in getting more data or not.

Failures to retrieve results will be returned as Error responses. These last statuses are only returned when the iterator is operating as expected.. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the LastIterationStatus instance.

END_OF_DATA = LastIterationStatus(string='END_OF_DATA')

Iterator has finished iterating through its inventory. There are currently no more entities to return and the caller can terminate iteration. If the iterator returned some data, the marker may be set to allow the iterator to continue from where it left off when additional data does become available. This value is used to indicate that all available data has been returned by the iterator. This class attribute was added in vSphere API 7.0.0.0.

READY = LastIterationStatus(string='READY')

Iterator has more data pending and is ready to provide it. The caller can request the next page of data at any time.

The number of results returned may be less than the usual size. In other words, the iterator may not fill the page. The iterator has returned at least 1 result.. This class attribute was added in vSphere API 7.0.0.0.

class ListResult(associations=None, marker=None, status=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Associations.ListResult class contains the list of tag associations in a page, as well as related metadata fields. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • associations (list of Associations.Summary) – List of tag associations. This attribute was added in vSphere API 7.0.0.0.

  • marker (str or None) – Marker is an opaque data structure that allows the caller to request the next page of tag associations. This attribute was added in vSphere API 7.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.tagging.associations.Marker. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.tagging.associations.Marker. If None or empty, there are no more tag associations to request.

  • status (Associations.LastIterationStatus) – The last status for the iterator that indicates whether any more results can be expected if the caller continues to make requests for more data using the iterator. This attribute was added in vSphere API 7.0.0.0.

class Summary(tag=None, object=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Associations.Summary describes a tag association. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • tag (str) – The identifier of a tag. This attribute was added in vSphere API 7.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.cis.tagging.Tag. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.cis.tagging.Tag.

  • object (com.vmware.vapi.std_client.DynamicID) – The identifier of an associated object. This attribute was added in vSphere API 7.0.0.0.

list(iterate=None)

Returns tag associations that match the specified iteration spec. This method was added in vSphere API 7.0.0.0.

Parameters

iterate (Associations.IterationSpec or None) – The specification of a page to be retrieved. If None, the first page will be retrieved.

Return type

Associations.ListResult

Returns

A page of the tag associations matching the iteration spec.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if Associations.IterationSpec.marker is not a marker returned from an earlier invocation of this {\@term operation).

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

class com.vmware.vcenter.tagging_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.tokenservice_client module

The com.vmware.vcenter.tokenservice_client module provides Token classes.

exception com.vmware.vcenter.tokenservice_client.Error(messages=None, data=None)

Bases: vmware.vapi.bindings.error.VapiError

The Error exception describes theattributes common to all standard exceptions.

This exception serves two purposes:

  1. It is the exception that clients in many programming languages can catch to handle all standard exceptions. Typically those clients will display one or more of the localizable messages from Error.messages to a human.

  2. It is the exception that methods can report when they need to report some exception, but the exception doesn’t fit into any other standard exception, and in fact the only reasonable way for a client to react to the exception is to display the message(s) to a human.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • messages (list of com.vmware.vapi.std_client.LocalizableMessage) –

    Stack of one or more localizable messages for human exception consumers.

    The message at the top of the stack (first in the list) describes the exception from the perspective of the method the client invoked. Each subsequent message in the stack describes the “cause” of the prior message.

  • data (vmware.vapi.struct.VapiStruct or None) –

    Data to facilitate clients responding to the method reporting a standard exception to indicating that it was unable to complete successfully.

    Methods may provide data that clients can use when responding to exceptions. Since the data that clients need may be specific to the context of the method reporting the exception, different methods that report the same exception may provide different data in the exception. The documentation for each each method will describe what, if any, data it provides for each exception it reports. The ArgumentLocations, FileLocations, and TransientIndication classes are intended as possible values for this attribute. com.vmware.vapi.std_client.DynamicID may also be useful as a value for this attribute (although that is not its primary purpose). Some classes may provide their own specific classes for use as the value of this attribute when reporting exceptions from their methods. Some methods will not set this attribute when reporting exceptions.

exception com.vmware.vcenter.tokenservice_client.InvalidGrant(messages=None, data=None)

Bases: com.vmware.vcenter.tokenservice_client.Error

The InvalidGrant exception indicates that provided authorization grant (e.g., authorization code, resource owner credentials) or refresh token is invalid, expired, revoked, does not match the redirection URI used in the authorization request, or was issued to another client.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • messages (list of com.vmware.vapi.std_client.LocalizableMessage) –

    Stack of one or more localizable messages for human exception consumers.

    The message at the top of the stack (first in the list) describes the exception from the perspective of the method the client invoked. Each subsequent message in the stack describes the “cause” of the prior message.

  • data (vmware.vapi.struct.VapiStruct or None) –

    Data to facilitate clients responding to the method reporting a standard exception to indicating that it was unable to complete successfully.

    Methods may provide data that clients can use when responding to exceptions. Since the data that clients need may be specific to the context of the method reporting the exception, different methods that report the same exception may provide different data in the exception. The documentation for each each method will describe what, if any, data it provides for each exception it reports. The ArgumentLocations, FileLocations, and TransientIndication classes are intended as possible values for this attribute. com.vmware.vapi.std_client.DynamicID may also be useful as a value for this attribute (although that is not its primary purpose). Some classes may provide their own specific classes for use as the value of this attribute when reporting exceptions from their methods. Some methods will not set this attribute when reporting exceptions.

exception com.vmware.vcenter.tokenservice_client.InvalidRequest(messages=None, data=None)

Bases: com.vmware.vcenter.tokenservice_client.Error

The InvalidRequest exception indicates that TokenExchange.ExchangeSpec is missing a required parameter, includes an unsupported parameter value (other than TokenExchange.ExchangeSpec.grant_type)

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • messages (list of com.vmware.vapi.std_client.LocalizableMessage) –

    Stack of one or more localizable messages for human exception consumers.

    The message at the top of the stack (first in the list) describes the exception from the perspective of the method the client invoked. Each subsequent message in the stack describes the “cause” of the prior message.

  • data (vmware.vapi.struct.VapiStruct or None) –

    Data to facilitate clients responding to the method reporting a standard exception to indicating that it was unable to complete successfully.

    Methods may provide data that clients can use when responding to exceptions. Since the data that clients need may be specific to the context of the method reporting the exception, different methods that report the same exception may provide different data in the exception. The documentation for each each method will describe what, if any, data it provides for each exception it reports. The ArgumentLocations, FileLocations, and TransientIndication classes are intended as possible values for this attribute. com.vmware.vapi.std_client.DynamicID may also be useful as a value for this attribute (although that is not its primary purpose). Some classes may provide their own specific classes for use as the value of this attribute when reporting exceptions from their methods. Some methods will not set this attribute when reporting exceptions.

exception com.vmware.vcenter.tokenservice_client.InvalidScope(messages=None, data=None)

Bases: com.vmware.vcenter.tokenservice_client.Error

The InvalidScope exception indicates requested scope is invalid, unknown, malformed, or exceeds the scope granted by the resource owner.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • messages (list of com.vmware.vapi.std_client.LocalizableMessage) –

    Stack of one or more localizable messages for human exception consumers.

    The message at the top of the stack (first in the list) describes the exception from the perspective of the method the client invoked. Each subsequent message in the stack describes the “cause” of the prior message.

  • data (vmware.vapi.struct.VapiStruct or None) –

    Data to facilitate clients responding to the method reporting a standard exception to indicating that it was unable to complete successfully.

    Methods may provide data that clients can use when responding to exceptions. Since the data that clients need may be specific to the context of the method reporting the exception, different methods that report the same exception may provide different data in the exception. The documentation for each each method will describe what, if any, data it provides for each exception it reports. The ArgumentLocations, FileLocations, and TransientIndication classes are intended as possible values for this attribute. com.vmware.vapi.std_client.DynamicID may also be useful as a value for this attribute (although that is not its primary purpose). Some classes may provide their own specific classes for use as the value of this attribute when reporting exceptions from their methods. Some methods will not set this attribute when reporting exceptions.

class com.vmware.vcenter.tokenservice_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.tokenservice_client.TokenExchange(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The TokenExchange interface provides possibility to exchange between different tokens types. Implementation of “OAuth 2.0 Token Exchange” standard (https://tools.ietf.org/html/draft-ietf-oauth-token-exchange-12).

This interface has been deprecated in the vSphere 7.0 U2 release. Use com.vmware.vcenter.authentication.Token instead.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

ACCESS_TOKEN_TYPE = 'urn:ietf:params:oauth:token-type:access_token'

Class attribute indicates OAuth 2.0 access token type.

BEARER_TOKEN_METHOD_TYPE = 'Bearer'

Class attribute indicates that the security token is a bearer token.

class ExchangeSpec(grant_type=None, resource=None, audience=None, scope=None, requested_token_type=None, subject_token=None, subject_token_type=None, actor_token=None, actor_token_type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The TokenExchange.ExchangeSpec class contains arguments required for token exchange.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • grant_type (str) – The value of TokenExchange.TOKEN_EXCHANGE_GRANT indicates that a token exchange is being performed.

  • resource (str or None) – Indicates the location of the target service or resource where the client intends to use the requested security token. if can be inferred from other arguments or not needed for specific case of exchange.

  • audience (str or None) – The logical name of the target service where the client intends to use the requested security token. This serves a purpose similar to the TokenExchange.ExchangeSpec.resource parameter, but with the client providing a logical name rather than a location. if can be inferred from other arguments or not needed for specific case of exchange.

  • scope (str or None) – A list of space-delimited, case-sensitive strings, that allow the client to specify the desired scope of the requested security token in the context of the service or resource where the token will be used. if can be inferred from other arguments or not needed for specific case of exchange.

  • requested_token_type (str or None) – An identifier for the type of the requested security token. If the requested type is unspecified, the issued token type is at the discretion of the server and may be dictated by knowledge of the requirements of the service or resource indicated by the TokenExchange.ExchangeSpec.resource or TokenExchange.ExchangeSpec.audience parameter. if can be inferred from other arguments or not needed for specific case of exchange.

  • subject_token (str) – A security token that represents the identity of the party on behalf of whom exchange is being made. Typically, the subject of this token will be the subject of the security token issued. Token is base64-encoded.

  • subject_token_type (str) – An identifier, that indicates the type of the security token in the TokenExchange.ExchangeSpec.subject_token parameter.

  • actor_token (str or None) – A security token that represents the identity of the acting party. Typically, this will be the party that is authorized to use the requested security token and act on behalf of the subject. if not needed for specific case of exchange.

  • actor_token_type (str or None) – An identifier, that indicates the type of the security token in the TokenExchange.ExchangeSpec.actor_token parameter. if TokenExchange.ExchangeSpec.actor_token parameter is not present.

ID_TOKEN_TYPE = 'urn:ietf:params:oauth:token-type:id_token'

Class attribute indicates OIDC ID token type.

class Info(access_token=None, issued_token_type=None, token_type=None, expires_in=None, scope=None, refresh_token=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The TokenExchange.Info class contains data that represents successful token exchange response.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • access_token (str) – The security token issued by the server in response to the token exchange request. Token is base64-encoded.

  • issued_token_type (str) – An identifier, that indicates the type of the security token in the TokenExchange.Info.access_token parameter.

  • token_type (str) – A case-insensitive value specifying the method of using the access token issued.

  • expires_in (long or None) – The validity lifetime, in seconds, of the token issued by the server. if not applicable for issued token.

  • scope (str or None) – Scope of the issued security token. if the scope of the issued security token is identical to the scope requested by the client.

  • refresh_token (str or None) – A refresh token can be issued in cases where the client of the token exchange needs the ability to access a resource even when the original credential is no longer valid. if not needed for specific case of exchange.

N_A_TOKEN_METHOD_TYPE = 'N_A'

Class attribute indicates TokenExchange.Info.token_type identifier is not applicable in that context.

REFRESH_TOKEN_TYPE = 'urn:ietf:params:oauth:token-type:refresh_token'

Class attribute indicates OAuth 2.0 refresh token type.

SAML1_TOKEN_TYPE = 'urn:ietf:params:oauth:token-type:saml1'

Class attribute indicates base64-encoded SAML 1.1 token type.

SAML2_TOKEN_TYPE = 'urn:ietf:params:oauth:token-type:saml2'

Class attribute indicates base64-encoded SAML 2.0 token type.

TOKEN_EXCHANGE_GRANT = 'urn:ietf:params:oauth:grant-type:token-exchange'

Class attribute indicates that token exchange grant type.

exchange(spec)

Exchanges incoming token based on the spec and current client authorization data.

This method has been deprecated in the vSphere 7.0 U2 release. Use com.vmware.vcenter.authentication.Token#issue instead.

Parameters

spec (TokenExchange.ExchangeSpec) – TokenExchange.ExchangeSpec class contains arguments that define exchange process.

Return type

TokenExchange.Info

Returns

TokenExchange.Info class that contains new token.

Raise

InvalidGrant provided authorization grant (e.g., authorization code, resource owner credentials) or refresh token is invalid, expired, revoked, does not match the redirection URI used in the authorization request, or was issued to another client.

Raise

InvalidScope If the server is unwilling or unable to issue a token for all the target services indicated by the TokenExchange.ExchangeSpec.resource or TokenExchange.ExchangeSpec.audience parameters.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if authorization is not given to a caller.

com.vmware.vcenter.topology_client module

The com.vmware.vcenter.topology_client module provides classes to retrieve all vCenter and Platform Services Controller nodes and replication status in the topology.

class com.vmware.vcenter.topology_client.Nodes(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Nodes interface provides methods to retrieve vCenter and Platform Services Controller nodes information in the topology. This class was added in vSphere API 6.7.2.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class ApplianceType(string)

Bases: vmware.vapi.bindings.enum.Enum

The Nodes.ApplianceType class defines values for valid appliance types for the vCenter and Platform Services Controller node. See Nodes.Info. This enumeration was added in vSphere API 6.7.2.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ApplianceType instance.

PSC_EXTERNAL = ApplianceType(string='PSC_EXTERNAL')

An external Platform Services Controller. This class attribute was added in vSphere API 6.7.2.

VCSA_EMBEDDED = ApplianceType(string='VCSA_EMBEDDED')

vCenter Server Appliance with an embedded Platform Services Controller. This class attribute was added in vSphere API 6.7.2.

VCSA_EXTERNAL = ApplianceType(string='VCSA_EXTERNAL')

vCenter Server Appliance with an external Platform Services Controller. This class attribute was added in vSphere API 6.7.2.

class FilterSpec(types=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Nodes.FilterSpec class contains attribute used to filter the results when listing vCenter and Platform Services Controller nodes (see Nodes.list()). This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

types (set of Nodes.ApplianceType or None) – Types of the appliance that a vCenter and Platform Services Controller node must be to match the filter (see Nodes.ApplianceType. This attribute was added in vSphere API 6.7.2. If None or empty, node of any ApplianceType match the filter.

class Info(domain=None, type=None, replication_partners=None, client_affinity=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Nodes.Info class contains vCenter or Platform Services Controller node details. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • domain (str) – Domain name of the node. This attribute was added in vSphere API 6.7.2.

  • type (Nodes.ApplianceType) – Appliance type of the node. This attribute was added in vSphere API 6.7.2.

  • replication_partners (list of str) – List of replication partners’ node identifiers. Identifiers can be either IP address or DNS resolvable name of the partner node. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.VCenter.name. This attribute is optional and it is only relevant when the value of type is one of Nodes.ApplianceType.VCSA_EMBEDDED or Nodes.ApplianceType.PSC_EXTERNAL.

  • client_affinity (str) – Identifier of the affinitized Platform Services Controller node. Identifier can be either IP address or DNS resolvable name of the affinitized node. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.VCenter.name. This attribute is optional and it is only relevant when the value of type is Nodes.ApplianceType.VCSA_EXTERNAL.

class Summary(node=None, type=None, replication_partners=None, client_affinity=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Nodes.Summary class contains commonly used information of vCenter or Platform Services Controller node. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • node (str) – Identifier for the vCenter or Platform Services Controller node. Identifier can be either IP address or DNS resolvable name of the node. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.VCenter.name.

  • type (Nodes.ApplianceType) – Appliance type of the node. This attribute was added in vSphere API 6.7.2.

  • replication_partners (list of str) – List of replication partners’ node identifiers. Identifiers can be either IP address or DNS resolvable name of the partner node. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.VCenter.name. This attribute is optional and it is only relevant when the value of type is one of Nodes.ApplianceType.VCSA_EMBEDDED or Nodes.ApplianceType.PSC_EXTERNAL.

  • client_affinity (str) – Identifier of the affinitized Platform Services Controller node. Identifier can be either IP address or DNS resolvable name of the affinitized node. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.VCenter.name. This attribute is optional and it is only relevant when the value of type is Nodes.ApplianceType.VCSA_EXTERNAL.

get(node)

Retrieve details for a given identifier of the vCenter or Platform Services Controller node. This method was added in vSphere API 6.7.2.

Parameters

node (str) – Identifier of the vCenter or Platform Services Controller node. Identifier can be either IP address or DNS resolvable name of the node. The parameter must be an identifier for the resource type: com.vmware.vcenter.VCenter.name.

Return type

Nodes.Info

Returns

vCenter or Platform Services Controller node details with replication partners and client affinity information as applicable. See Nodes.Info.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.NotFound if a node doesn’t exist for given node identifier.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

list(filter=None)

Returns information about all vCenter and Platform Services Controller nodes matching the Nodes.FilterSpec. This method was added in vSphere API 6.7.2.

Parameters

filter (Nodes.FilterSpec or None) – Specification of matching vCenter and Platform Services Controller nodes for which information should be returned. If None, the behavior is equivalent to a Nodes.FilterSpec with all attributes None which means all nodes match the filter.

Return type

list of Nodes.Summary

Returns

commonly used information for all vCenter and Platform Services Controller nodes matching the Nodes.FilterSpec.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the Nodes.FilterSpec.types attribute contains a value that is not supported.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

class com.vmware.vcenter.topology_client.ReplicationStatus(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The ReplicationStatus interface provides methods to retrieve replication status information of vCenter and Platform Services Controller nodes of type VCSA_EMBEDDED/PSC_EXTERNAL (see Nodes.Info.type). This class was added in vSphere API 6.7.2.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class FilterSpec(nodes=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ReplicationStatus.FilterSpec class contains attribute used to filter the results when listing replication status for the vCenter and Platform Services Controller nodes (see ReplicationStatus.list()) of type VCSA_EMBEDDED/PSC_EXTERNAL (see Nodes.Info.type). This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

nodes (set of str or None) – Identifier that a vCenter and Platform Services Controller node must have to match the filter. (see ReplicationStatus.Summary.node). This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.VCenter.name. If None or empty, all vCenter and Platform Services Controller nodes of type VCSA_EMBEDDED/PSC_EXTERNAL match the filter.

class Summary(node=None, replication_partner=None, partner_available=None, status_available=None, replicating=None, change_lag=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ReplicationStatus.Summary class contains replication information of partner vCenter or Platform Services Controller node of type VCSA_EMBEDDED/PSC_EXTERNAL (see Nodes.Info.type). This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • node (str) – Identifier for the vCenter or Platform Services Controller node. Identifier can be either IP address or DNS resolvable name of the node. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.VCenter.name.

  • replication_partner (str) – Identifier for the vCenter or Platform Services Controller replication partner. Identifier can be either IP address or DNS resolvable name of the replication partner. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.VCenter.name. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.VCenter.name.

  • partner_available (bool) – Indicates if the VMware Directory Service on partner is reachable or not. This attribute was added in vSphere API 6.7.2.

  • status_available (bool) – Indicates if the replication status for the node with respect to replication partner can be retrieved or not. This attribute was added in vSphere API 6.7.2.

  • replicating (bool or None) – Indicates if node is processing replication changes from the replication partner. This attribute was added in vSphere API 6.7.2. This attribute will be None if the partner host or replication status is not available, i.e, if ReplicationStatus.Summary.partner_available or ReplicationStatus.Summary.status_available is false.

  • change_lag (long or None) – Number of replication changes node is behind the replication partner. This attribute was added in vSphere API 6.7.2. This attribute will be None if the partner host or replication status is not available, i.e, if ReplicationStatus.Summary.partner_available or ReplicationStatus.Summary.status_available is false.

list(filter=None)

Returns the replication information of vCenter and Platform Services Controller nodes of type VCSA_EMBEDDED/PSC_EXTERNAL (see Nodes.Info.type) matching the ReplicationStatus.FilterSpec. This method was added in vSphere API 6.7.2.

Parameters

filter (ReplicationStatus.FilterSpec or None) – Specification of matching vCenter and Platform Services Controller nodes for which information should be returned. If None, the behavior is equivalent to a ReplicationStatus.FilterSpec with all attributes None which means all vCenter and Platform Services Controller nodes of type VCSA_EMBEDDED/PSC_EXTERNAL match the filter.

Return type

list of ReplicationStatus.Summary

Returns

Commonly used replication information about vCenter and Platform Services Controller nodes matching the ReplicationStatus.FilterSpec.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the ReplicationStatus.FilterSpec.nodes attribute contains a invalid value.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

class com.vmware.vcenter.topology_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.trusted_infrastructure_client module

The com.vmware.vcenter.trusted_infrastructure_client module provides classes that enable a Trusted Infrastructure. They are responsible for ensuring that infrastructure nodes are running trusted software and for releasing encryption keys only to trusted infrastructure nodes.

class com.vmware.vcenter.trusted_infrastructure_client.NetworkAddress(hostname=None, port=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The NetworkAddress class contains an IP address or DNS resolvable name and a port on which a connection can be established. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (str) – The IP address or DNS resolvable name of the service. This attribute was added in vSphere API 7.0.0.0.

  • port (long or None) – The port of the service. This attribute was added in vSphere API 7.0.0.0. If None, port 443 will be used.

class com.vmware.vcenter.trusted_infrastructure_client.Principal(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Principal class contains information about the certificates which sign the tokens used by vCenter for authentication. This class was added in vSphere API 7.0.0.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(certificates=None, issuer=None, principal=None, name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Principal.Info class contains the information about the principal and certificates used by this vCenter to retrieve tokens. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • certificates (list of X509CertChain) – The certificates used by the STS to sign tokens for this vCenter. This attribute was added in vSphere API 7.0.0.0.

  • issuer (str) – The service which created and signed the security token. This attribute was added in vSphere API 7.0.0.0.

  • principal (StsPrincipal) – The principal used by this vCenter instance to retrieve tokens. Currently this is the vCenter solution user. This attribute was added in vSphere API 7.0.0.0.

  • name (str) – The user-friednly name of the vCenter. This attribute was added in vSphere API 7.0.0.0.

get()

Returns information about the STS used by this vCenter instance. This method was added in vSphere API 7.0.0.0.

Return type

Principal.Info

Returns

\@{link Info} a summary containing the certificates used to sign tokens and the solution user used to retrieve them.

Raise

com.vmware.vapi.std.errors_client.Error if there is a generic error.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires TrustedAdmin.ReadStsInfo.

class com.vmware.vcenter.trusted_infrastructure_client.StsPrincipal(id=None, type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The StsPrincipal class contains a IDM principal. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • id (StsPrincipalId) – The principal’s ID. This attribute was added in vSphere API 7.0.0.0.

  • type (StsPrincipalType) – The type of the principal (user or group). This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.trusted_infrastructure_client.StsPrincipalId(name=None, domain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The StsPrincipalId class contains an IDM principal ID. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – The principal’s username. This attribute was added in vSphere API 7.0.0.0.

  • domain (str) – The principal’s domain. This attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.trusted_infrastructure_client.StsPrincipalType(string)

Bases: vmware.vapi.bindings.enum.Enum

The StsPrincipalType enum can be either users or groups. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the StsPrincipalType instance.

STS_GROUP = StsPrincipalType(string='STS_GROUP')

The principal is a group. This class attribute was added in vSphere API 7.0.0.0.

STS_USER = StsPrincipalType(string='STS_USER')

The principal is a user. This class attribute was added in vSphere API 7.0.0.0.

class com.vmware.vcenter.trusted_infrastructure_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.trusted_infrastructure_client.TrustAuthorityClusters(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The TrustAuthorityClusters class manages all the Trust Authority Components on each Trust Authority Host in the cluster. The TrustAuthorityClusters class transforms a ClusterComputeResource into Trust Authority Cluster and vice versa. This class was added in vSphere API 7.0.0.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class FilterSpec(cluster=None, state=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The TrustAuthorityClusters.FilterSpec class contains the data necessary for identifying a TrustAuthorityClusters. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (set of str or None) – Identifies the cluster. This attribute was added in vSphere API 7.0.0.0. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: ClusterComputeResource. cluster If {\@term.unset} return all Trust Authority Clusters.

  • state (set of TrustAuthorityClusters.State or None) – The state of the TrustAuthorityClusters. This attribute was added in vSphere API 7.0.0.0. state If {\@term.unset} return all Trust Authority Clusters.

class Info(cluster=None, state=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The TrustAuthorityClusters.Info class contains the data necessary for retrieving the TrustAuthorityClusters info. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifies the cluster. This attribute was added in vSphere API 7.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • state (TrustAuthorityClusters.State) – The state of the cluster. This attribute was added in vSphere API 7.0.0.0.

class State(string)

Bases: vmware.vapi.bindings.enum.Enum

The TrustAuthorityClusters.State class defines the states of the TrustAuthorityClusters. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the State instance.

DISABLE = State(string='DISABLE')

The TrustAuthorityClusters is disabled. This class attribute was added in vSphere API 7.0.0.0.

ENABLE = State(string='ENABLE')

The TrustAuthorityClusters is enabled. This class attribute was added in vSphere API 7.0.0.0.

class Summary(cluster=None, state=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The TrustAuthorityClusters.Summary class contains information about TrustAuthorityClusters id and state. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • cluster (str) – Identifies the cluster. This attribute was added in vSphere API 7.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource.

  • state (TrustAuthorityClusters.State) – The state of the TrustAuthorityClusters. This attribute was added in vSphere API 7.0.0.0.

class UpdateSpec(state=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The TrustAuthorityClusters.UpdateSpec class contains the data necessary for update of a TrustAuthorityClusters. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

state (TrustAuthorityClusters.State or None) – The state of the TrustAuthorityClusters. This attribute was added in vSphere API 7.0.0.0. state If {\@term.unset} no operation is performed.

get(cluster)

Get the result of the last Update operation which matches the cluster id. This method was added in vSphere API 7.0.0.0.

Parameters

cluster (str) – Cluster id. The parameter must be an identifier for the resource type: ClusterComputeResource.

Return type

TrustAuthorityClusters.Info

Returns

The TrustAuthorityClusters.Info instance which contains information about the state of the cluster.

Raise

com.vmware.vapi.std.errors_client.Error if there is a generic error.

Raise

com.vmware.vapi.std.errors_client.NotFound if cluster doesn’t match to any ClusterComputeResource.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires TrustedAdmin.ReadTrustedHosts.

  • The resource ClusterComputeResource referenced by the parameter cluster requires System.View.

list(spec=None)

Returns a list of clusters for this vCenter instance which matches the TrustAuthorityClusters.FilterSpec. This method was added in vSphere API 7.0.0.0.

Parameters

spec (TrustAuthorityClusters.FilterSpec or None) – Return only clusters matching the specified filters. If {\@term.unset} return all clusters.

Return type

list of TrustAuthorityClusters.Summary

Returns

List of TrustAuthorityClusters.Summary for a TrustAuthorityClusters.

Raise

com.vmware.vapi.std.errors_client.Error if there is a generic error.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires TrustedAdmin.ReadTrustedHosts.

  • The resource ClusterComputeResource referenced by the attribute TrustAuthorityClusters.FilterSpec.cluster requires System.View.

update_task(cluster, spec)

Updates the state of a cluster. This method was added in vSphere API 7.0.0.0.

Parameters
  • cluster (str) – Cluster id. The parameter must be an identifier for the resource type: ClusterComputeResource.

  • spec (TrustAuthorityClusters.UpdateSpec) – The specification for update of a cluster.

Raise

com.vmware.vapi.std.errors_client.Error if there is a generic error.

Raise

com.vmware.vapi.std.errors_client.NotFound if spec doesn’t match to any cluster compute resource.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

class com.vmware.vcenter.trusted_infrastructure_client.X509CertChain(cert_chain=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The X509CertChain class contains x509 certificate chain. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

cert_chain (list of str) – Certificate chain in base64 format. This attribute was added in vSphere API 7.0.0.0.

com.vmware.vcenter.vcha_client module

The com.vmware.vcenter.vcha_client module provides classes for deploying and monitoring a vCenter High Availability (VCHA) Cluster.

class com.vmware.vcenter.vcha_client.CertificateInfo(ssl_thumbprint=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CertificateInfo Class contains information about the SSL certificate for a management vCenter server. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

ssl_thumbprint (str) – The SHA-256 thumbprint of the SSL certificate for a management vCenter server. This attribute was added in vSphere API 6.7.1.

class com.vmware.vcenter.vcha_client.Cluster(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Cluster class provides methods to deploy and undeploy a vCenter High Availability (VCHA) cluster, failover from the active VCHA node to the passive VCHA node, and retrieve the status of the VCHA cluster. This class was added in vSphere API 6.7.1.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class ActiveSpec(ha_network_type=None, ha_network=None, ha_ip=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.ActiveSpec class contains the deploy specification for the Active Node of the VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • ha_network_type (NetworkType or None) – The type of the Network object used by the HA network. If the Cluster.ActiveSpec.ha_network attribute is set, then the Cluster.ActiveSpec.ha_network_type field must be set. If the Cluster.ActiveSpec.ha_network attribute is None, then the Cluster.ActiveSpec.ha_network_type attribute is ignored. This attribute was added in vSphere API 6.7.1. If None and the Cluster.ActiveSpec.ha_network attribute is unset, then the second NIC is assumed to be already configured. If None and the Cluster.ActiveSpec.ha_network attribute is set, then an error is reported.

  • ha_network (str or None) – The identifier of the Network object used for the HA network. If the Cluster.ActiveSpec.ha_network attribute is set, then the Cluster.ActiveSpec.ha_network_type attribute must be set. If the Cluster.ActiveSpec.ha_network attribute is None, then the Cluster.ActiveSpec.ha_network_type attribute is ignored. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter. If None and the Cluster.ActiveSpec.ha_network_type attribute is unset, then the second NIC is assumed to be already configured. If None and the Cluster.ActiveSpec.ha_network attribute is set, then an error is reported.

  • ha_ip (IpSpec) – IP specification for the HA network. This attribute was added in vSphere API 6.7.1.

class ClusterMode(string)

Bases: vmware.vapi.bindings.enum.Enum

The Cluster.ClusterMode class defines the possible modes for a VCHA Cluster. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ClusterMode instance.

DISABLED = ClusterMode(string='DISABLED')

VCHA Cluster is disabled. State replication between the Active and Passive node is disabled and automatic failover is not allowed. This class attribute was added in vSphere API 6.7.1.

ENABLED = ClusterMode(string='ENABLED')

VCHA Cluster is enabled. State replication between the Active and Passive node is enabled and automatic failover is allowed. This class attribute was added in vSphere API 6.7.1.

MAINTENANCE = ClusterMode(string='MAINTENANCE')

VCHA Cluster is in maintenance mode. State replication between the Active and Passive node is enabled but automatic failover is not allowed. This class attribute was added in vSphere API 6.7.1.

class ClusterState(string)

Bases: vmware.vapi.bindings.enum.Enum

The Cluster.ClusterState class defines the possible for a VCHA Cluster. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ClusterState instance.

DEGRADED = ClusterState(string='DEGRADED')

A VCHA Cluster is said to be in a degraded state for either or all of the following reasons:

  • There is a node loss.

  • State replication between the Active and Passive node fails.

. This class attribute was added in vSphere API 6.7.1.

HEALTHY = ClusterState(string='HEALTHY')

All three nodes in a VCHA Cluster are healthy and connected. State replication between Active and Passive node is working and both nodes are in sync. This class attribute was added in vSphere API 6.7.1.

ISOLATED = ClusterState(string='ISOLATED')

All three nodes are isolated from each other. This class attribute was added in vSphere API 6.7.1.

class ConfigState(string)

Bases: vmware.vapi.bindings.enum.Enum

The Cluster.ConfigState class defines the VCHA configuration state. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ConfigState instance.

CONFIGURED = ConfigState(string='CONFIGURED')

VCHA cluster is configured. This class attribute was added in vSphere API 6.7.1.

INVALID = ConfigState(string='INVALID')

VCHA cluster is in an invalid/dirty state. This class attribute was added in vSphere API 6.7.1.

NOTCONFIGURED = ConfigState(string='NOTCONFIGURED')

VCHA cluster is not configured. This class attribute was added in vSphere API 6.7.1.

PREPARED = ConfigState(string='PREPARED')

vCenter server appliance has been prepared for VCHA cluster configuration. This class attribute was added in vSphere API 6.7.1.

class DeploySpec(vc_spec=None, deployment=None, active=None, passive=None, witness=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.DeploySpec class contains the deploy specification for the three nodes of a VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • vc_spec (CredentialsSpec or None) – Contains the active node’s management vCenter server credentials. This attribute was added in vSphere API 6.7.1. If None, then the active vCenter Server instance is assumed to be either self-managed or else in enhanced linked mode and managed by a linked vCenter Server instance.

  • deployment (Cluster.Type) – Contains the deployment type. This attribute was added in vSphere API 6.7.1.

  • active (Cluster.ActiveSpec) – Contains the active node’s network configuration. This attribute was added in vSphere API 6.7.1.

  • passive (Cluster.PassiveSpec) – Contains the passive node’s placement configuration. This attribute was added in vSphere API 6.7.1.

  • witness (Cluster.WitnessSpec) – Contains the witness node’s placement configuration. This attribute was added in vSphere API 6.7.1.

class ErrorCondition(error=None, recommendation=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.ErrorCondition class contains an error condition and a recommendation to handle the error condition. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class Info(config_state=None, node1=None, node2=None, witness=None, mode=None, health_state=None, health_exception=None, health_warnings=None, manual_failover_allowed=None, auto_failover_allowed=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.Info class contains the configuration and health information of the three nodes in a VCHA Cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • config_state (Cluster.ConfigState or None) – Configuration state of the VCHA cluster. The active node’s management vCenter server credentials are not required to populate this attribute. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable.

  • node1 (Cluster.NodeInfo or None) – Node configuration information for the VCHA cluster. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable.

  • node2 (Cluster.NodeInfo or None) – Node configuration information for the VCHA cluster. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable or the node is not cloned yet.

  • witness (Cluster.WitnessInfo or None) – Node configuration information for the VCHA cluster. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable or the node is not cloned yet.

  • mode (Cluster.ClusterMode or None) – Operational mode of the VCHA Cluster. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable or the node is not cloned yet.

  • health_state (Cluster.ClusterState or None) – Last known state of the VCHA Cluster. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable or the node is not cloned yet.

  • health_exception (list of com.vmware.vapi.std_client.LocalizableMessage or None) – Health warning messages if the health information is unavailable. This attribute was added in vSphere API 6.7.1. If None, then the cluster is in a healthy state.

  • health_warnings (list of Cluster.ErrorCondition or None) – A collection of messages describing the reason for a non-healthy Cluster. This attribute was added in vSphere API 6.7.1. If None, then the cluster is in a healthy state.

  • manual_failover_allowed (bool or None) – Specifies if manual failover is allowed. This attribute was added in vSphere API 6.7.1. If None, then the cluster state healthy and manual failover allowance in accordance with the cluster mode.

  • auto_failover_allowed (bool or None) – Specifies if automatic failover is allowed. This attribute was added in vSphere API 6.7.1. If None, then the cluster state healthy and automatic failover allowance in accordance with the cluster mode.

class IpFamily(string)

Bases: vmware.vapi.bindings.enum.Enum

The Cluster.IpFamily class defines the IP address family. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the IpFamily instance.

IPV4 = IpFamily(string='IPV4')

IPV4 address family. This class attribute was added in vSphere API 6.7.1.

IPV6 = IpFamily(string='IPV6')

IPV6 address family. This class attribute was added in vSphere API 6.7.1.

class IpInfo(ip_family=None, ipv4=None, ipv6=None, gateway_ip=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.IpInfo class contains attributes related to an ip. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • ip_family (Cluster.IpFamily) – Family of the ip. This attribute was added in vSphere API 6.7.1.

  • ipv4 (Cluster.Ipv4Info) – If the type of the ip family is IPV4, then this will point to IPv4 address specification. This attribute was added in vSphere API 6.7.1. This attribute is optional and it is only relevant when the value of ipFamily is Cluster.IpFamily.IPV4.

  • ipv6 (Cluster.Ipv6Info) – If the type of the ip family is IPV6, then this will point to IPv6 address specification. This attribute was added in vSphere API 6.7.1. This attribute is optional and it is only relevant when the value of ipFamily is Cluster.IpFamily.IPV6.

  • gateway_ip (str or None) – Gateway IP address. This attribute was added in vSphere API 6.7.1. If None, no gateway is specified.

class Ipv4Info(address=None, subnet_mask=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.Ipv4Info class contains attributes to describe IPV4 information of the configured network interface. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – IP address of the configured network interface. This attribute was added in vSphere API 6.7.1.

  • subnet_mask (str) – The subnet mask of the interface. This attribute was added in vSphere API 6.7.1.

  • prefix (long or None) – The CIDR prefix of the interface. This attribute was added in vSphere API 6.7.1. If None , then the subnet mask is invalid.

class Ipv6Info(address=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.Ipv6Info class contains attributes to describe IPV6 information of the configured network interface. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – IP address of the configured network interface. This attribute was added in vSphere API 6.7.1.

  • prefix (long) – The CIDR prefix of the interface. This attribute was added in vSphere API 6.7.1.

class NodeInfo(failover_ip=None, ha_ip=None, runtime=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.NodeInfo class defines the configuration information for the active and passive nodes in the cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • failover_ip (Cluster.IpInfo or None) – Failover IP address that this node will assume after the failover to serve client requests. Each failover node can have a different failover IP address. The active node’s management vCenter server credentials are not required to populate Cluster.NodeInfo.failover_ip. This attribute was added in vSphere API 6.7.1. If None, then it will assume the public IP address of the Active vCenter Server.

  • ha_ip (Cluster.IpInfo) – VCHA Cluster network configuration of the node. All cluster communication (state replication, heartbeat, cluster messages) happens over this network. The active node’s management vCenter server credentials are not required to populate this Cluster.NodeInfo.ha_ip. This attribute was added in vSphere API 6.7.1.

  • runtime (Cluster.NodeRuntimeInfo or None) – Runtime information for the node in the VCHA Cluster. The active node’s management vCenter server credentials are required to populate some attributes of Cluster.NodeInfo.runtime. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable or the specified Active vCenter server management credentials are invalid or the node is not cloned yet.

class NodeRole(string)

Bases: vmware.vapi.bindings.enum.Enum

The Cluster.NodeRole class defines the role node can be in a VCHA Cluster. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the NodeRole instance.

ACTIVE = NodeRole(string='ACTIVE')

Node is having a role of Active. In this role, node runs a vCenter Server that serves client requests. This class attribute was added in vSphere API 6.7.1.

PASSIVE = NodeRole(string='PASSIVE')

Node is having a role of Passive. In this role node, runs as a standby for the Active vCenter Server and receives state updates. This node takes over the role of Active vCenter Server upon failover. This class attribute was added in vSphere API 6.7.1.

WITNESS = NodeRole(string='WITNESS')

Node is having a role of Witness. In this role, node acts as a quorum node for avoiding the classic split-brain problem. This class attribute was added in vSphere API 6.7.1.

class NodeRuntimeInfo(state=None, role=None, placement=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.NodeRuntimeInfo class describes a node’s runtime information in a VCHA Cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • state (Cluster.NodeState or None) – Last known state of the node. The active node’s management vCenter server credentials are not required to populate Cluster.NodeRuntimeInfo.state. This attribute was added in vSphere API 6.7.1. If None, then information is unavailable or the passive and witness nodes are not cloned yet.

  • role (Cluster.NodeRole or None) – Last known role of the node. The active node’s management vCenter server credentials are not required to populate Cluster.NodeRuntimeInfo.role. This attribute was added in vSphere API 6.7.1. If None, then information is unavailable or the passive and witness nodes are not cloned yet.

  • placement (PlacementInfo or None) – Placement information of the node. The active node’s management vCenter server credentials are required to populate most attributes of Cluster.NodeRuntimeInfo.placement. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable or the specified Active vCenter server management credentials are invalid or the node is not cloned yet or the VCHA cluster was deployed in a manual fashion.

class NodeState(string)

Bases: vmware.vapi.bindings.enum.Enum

The Cluster.NodeState class defines possible state a node can be in a VCHA Cluster. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the NodeState instance.

DOWN = NodeState(string='DOWN')

Node is down and has left the VCHA Cluster. This class attribute was added in vSphere API 6.7.1.

UP = NodeState(string='UP')

Node is up and has joined the VCHA Cluster. This class attribute was added in vSphere API 6.7.1.

class NodeVmInfo(vm=None, bios_uuid=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.NodeVmInfo class contains information to describe the Virtual Machine of a node of a VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • vm (str) – The identifier of the virtual machine of the VCHA node. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: VirtualMachine:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: VirtualMachine:VCenter.

  • bios_uuid (str) – BIOS UUID for the node. This attribute was added in vSphere API 6.7.1.

class PassiveSpec(placement=None, ha_ip=None, failover_ip=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.PassiveSpec class contains the deploy specification for the Passive Node of the VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • placement (PlacementSpec or None) – Contains the placement configuration of the node. This attribute was added in vSphere API 6.7.1. If None, then the it is assumed that the clone will be done manually by the customer. In this case, the placement configuration for the witness node should also be omitted. Only the network configuration will be setup. Once the passive and witness nodes are cloned from the active node, the VCHA high availability is turned on.

  • ha_ip (IpSpec) – IP specification for the HA network. This attribute was added in vSphere API 6.7.1.

  • failover_ip (IpSpec or None) – IP specification for the management network. This attribute was added in vSphere API 6.7.1. If None, then it will assume the public IP address of the Active vCenter Server.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The Cluster.Type class defines the possible deployment types for a VCHA Cluster. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

AUTO = Type(string='AUTO')

Passive and witness nodes are cloned automatically. This class attribute was added in vSphere API 6.7.1.

MANUAL = Type(string='MANUAL')

Passive and witness nodes are not cloned automatically. After deployment, the customer should clone the passive and witness virtual machines. This class attribute was added in vSphere API 6.7.1.

class UndeploySpec(vc_spec=None, force_delete=None, vms=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.UndeploySpec class contains the undeploy specification for a VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • vc_spec (CredentialsSpec or None) – Contains the active node’s management vCenter server credentials. This attribute was added in vSphere API 6.7.1. If None, then the active vCenter Server instance is assumed to be either self-managed or else in enhanced linked mode and managed by a linked vCenter Server instance.

  • force_delete (bool or None) –

    Flag controlling in what circumstances the virtual machines will be deleted. For this flag to take effect, the VCHA cluster should have been successfully configured using automatic deployment.

    • If true, the Cluster.UndeploySpec.vms attribute will be ignored, the VCHA cluster specific information is removed, and the passive and witness virtual machines will be deleted.

    • If false, the Cluster.UndeploySpec.vms attribute contains the information identifying the passive and witness virtual machines.

    • If the Cluster.UndeploySpec.vms attribute is set, then it will be validated prior to deleting the passive and witness virtual machines and VCHA cluster specific information is removed.

    • If the Cluster.UndeploySpec.vms attribute is None, then the passive and witness virtual machines will not be deleted. The customer should delete them in order to cleanup completely. VCHA cluster specific information is removed.

    . This attribute was added in vSphere API 6.7.1. If None, the Cluster.UndeploySpec.vms attribute contains the information identifying the passive and witness virtual machines.

    • If the Cluster.UndeploySpec.vms attribute is set, then it will be validated prior to deleting the passive and witness virtual machines. VCHA cluster specific information is removed.

    • If the Cluster.UndeploySpec.vms attribute is None, then the passive and witness virtual machines will not be deleted. The customer should delete them in order to cleanup completely. VCHA cluster specific information is removed.

  • vms (Cluster.VmInfo or None) –

    Contains virtual machine information for the passive and witness virtual machines. For this flag to take effect, the VCHA cluster should have been successfully configured using automatic deployment.

    If set, the Cluster.UndeploySpec.force_delete attribute controls whether this information is validated.

    • If the Cluster.UndeploySpec.force_delete attribute is true, then this information is ignored, VCHA cluster specific information is removed and the passive and witness virtual machines will be deleted.

    • If the Cluster.UndeploySpec.force_delete attribute is None or false, then this information is validated prior to deleting the passive and witness virtual machines. VCHA cluster specific information is removed.

    . This attribute was added in vSphere API 6.7.1. If None, the Cluster.UndeploySpec.force_delete attribute controls the deletion of the passive and witness virtual machines.

    • If the Cluster.UndeploySpec.force_delete attribute is true, then the passive and witness virtual machines will be deleted. VCHA cluster specific information is removed.

    • If the Cluster.UndeploySpec.force_delete attribute is None or false, then the passive and witness virtual machines will not be deleted. The customer should delete them in order to cleanup completely. VCHA cluster specific information is removed.

class VmInfo(passive=None, witness=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.VmInfo class contains information to describe the Virtual Machines of passive and witness nodes of a VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • passive (Cluster.NodeVmInfo) – The virtual machine information of the passive node. This attribute was added in vSphere API 6.7.1.

  • witness (Cluster.NodeVmInfo) – The virtual machine information of the witness node. This attribute was added in vSphere API 6.7.1.

class WitnessInfo(ha_ip=None, runtime=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.WitnessInfo class defines the configuration and runtime information for the witness node in the cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • ha_ip (Cluster.IpInfo) – VCHA Cluster network configuration of the node. All cluster communication (state replication, heartbeat, cluster messages) happens over this network. The active node’s management vCenter server credentials are not required to populate Cluster.WitnessInfo.ha_ip. This attribute was added in vSphere API 6.7.1.

  • runtime (Cluster.NodeRuntimeInfo or None) – Runtime information for the node in the VCHA Cluster. The active node’s management vCenter server credentials are required to populate some attributes of Cluster.WitnessInfo.runtime. This attribute was added in vSphere API 6.7.1. If None, then the information is unavailable or the node is not cloned yet.

class WitnessSpec(placement=None, ha_ip=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Cluster.WitnessSpec class contains the deploy specification for the Witness Node of the VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • placement (PlacementSpec or None) – Contains the placement configuration of the node. This attribute was added in vSphere API 6.7.1. If None, then it is assumed that the clone will be done manually by the customer. In this case, the placement configuration for the witness node should also be omitted. Only the network configuration will be setup. Once the passive and witness nodes are cloned from the active node, the VCHA high availability is turned on.

  • ha_ip (IpSpec) – IP specification for the HA network. This attribute was added in vSphere API 6.7.1.

deploy_task(spec)

Prepares, clones, and configures a VCHA cluster. This method was added in vSphere API 6.7.1.

Parameters

spec (Cluster.DeploySpec) – Contains the deploy specification for all three nodes of a VCHA cluster.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If the credentials provided for authenticating with the active node’s management vCenter server are invalid.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user has insufficient privilege to perform the operation. Operation execution requires the Global.VCServer privilege.

Raise

com.vmware.vapi.std.errors_client.UnverifiedPeer If the SSL certificate of the management vCenter server cannot be validated. The value of the data attribute of com.vmware.vapi.std.errors_client.Error will be a class that contains all the attributes defined in CertificateInfo.

Raise

com.vmware.vapi.std.errors_client.Error If any other error occurs.

failover_task(planned)

Initiates failover from the active vCenter node to the passive node.

For forced failover, Active node immediately initiates a failover. This may result into a data loss after failover.

For planned failover, Active node flushes all the state to the Passive node, waits for the flush to complete before causing a failover. After the failover, Passive node starts without any data loss.

A failover is allowed only in the following cases:

  1. Cluster’s mode is enabled and all cluster members are present.

  2. Cluster’s mode is maintenance and all cluster members are present.

. This method was added in vSphere API 6.7.1.

Parameters

planned (bool) – If false, a failover is initiated immediately and may result in data loss. If true, a failover is initated after the Active node flushes its state to Passive and there is no data loss.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user has insufficient privilege to perform the operation. Operation execution requires the Global.VCServer privilege.

Raise

com.vmware.vapi.std.errors_client.Error If any other error occurs.

get(vc_spec=None, partial=None)

Retrieves the status of a VCHA cluster. This method was added in vSphere API 6.7.1.

Parameters
  • vc_spec (CredentialsSpec or None) – Contains active node’s management vCenter server credentials. If None, then the active vCenter Server instance is assumed to be either self-managed or else in enhanced linked mode and managed by a linked vCenter Server instance.

  • partial (bool or None) –

    If true, then return only the information that does not require connecting to the Active vCenter Server.

    If false or unset, then return all the information.

    If None, then return all the information.

Return type

Cluster.Info

Returns

Info structure containing the VCHA configuration and health information.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If the credentials provided for authenticating with the active node’s management vCenter server are invalid.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user has insufficient privilege to perform the operation.

  • If partial is false or unset, then the operation execution requires the Global.VCServer privilege.

  • If partial is true, then the operation execution requires the System.Read privilege.

Raise

com.vmware.vapi.std.errors_client.UnverifiedPeer If the SSL certificate of the management vCenter server cannot be validated. The value of the data attribute of com.vmware.vapi.std.errors_client.Error will be a class that contains all the attributes defined in CertificateInfo.

Raise

com.vmware.vapi.std.errors_client.Error If any other error occurs.

undeploy_task(spec)

Destroys the VCHA cluster and removes all VCHA specific information from the VCVA appliance. Optionally, the passive and witness node virtual machines will be deleted only if VCHA was deployed using automatic deployment. The active node in the cluster continues to run as a standalone VCVA appliance after the destroy operation has been performed.

If the VCHA cluster is in a transition state and not configured, then the VCHA cluster specific information is removed.. This method was added in vSphere API 6.7.1.

Parameters

spec (Cluster.UndeploySpec) – Contains the undeploy specification for a VCHA cluster.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If the credentials provided for authenticating with the active node’s management vCenter server are invalid.

Raise

com.vmware.vapi.std.errors_client.NotFound If the passive virtual machine is not managed by the specified vCenter server.

Raise

com.vmware.vapi.std.errors_client.NotFound If the witness virtual machine is not managed by the specified vCenter server.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user has insufficient privilege to perform the operation. Operation execution requires the Global.VCServer privilege.

Raise

com.vmware.vapi.std.errors_client.UnverifiedPeer If the SSL certificate of the management vCenter server cannot be validated. The value of the data attribute of com.vmware.vapi.std.errors_client.Error will be a class that contains all the attributes defined in CertificateInfo.

Raise

com.vmware.vapi.std.errors_client.Error If any other error occurs.

class com.vmware.vcenter.vcha_client.ConnectionSpec(hostname=None, port=None, ssl_thumbprint=None, username=None, password=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ConnectionSpec class contains information required to connect to a vCenter server. The connection to the vCenter server always uses the HTTPS protocol. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • hostname (str) – IP Address or DNS of the vCenter. This attribute was added in vSphere API 6.7.1.

  • port (long or None) – Port number. This attribute was added in vSphere API 6.7.1. If None, port 443 will be used.

  • ssl_thumbprint (str or None) – SHA1 hash of the server SSL certificate. This attribute was added in vSphere API 6.7.1. If None, empty ssl thumbprint is assumed.

  • username (str or None) – Username to access the server. This attribute was added in vSphere API 6.7.1. This attribute is currently required. If None, an error is returned. In the future, if this attribute is None, the system will attempt to identify the user. If a user cannot be identified, then the requested operation will fail.

  • password (str or None) – Password for the specified user. This attribute was added in vSphere API 6.7.1. This attribute is currently required. If None, an empty password is assumed. In the future, if this attribute is None, the system will attempt to authenticate the user. If a user cannot be identified, then the requested operation will fail.

class com.vmware.vcenter.vcha_client.CredentialsSpec(active_location=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The CredentialsSpec class contains information to connect to the vCenter server managing the VCHA nodes. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

active_location (ConnectionSpec) – Connection information for the management vCenter Server of the Active Node in a VCHA Cluster. This attribute was added in vSphere API 6.7.1.

class com.vmware.vcenter.vcha_client.DiskInfo(datastore=None, datastore_name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DiskInfo class contains information to describe the storage configuration of a vCenter virtual machine. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • datastore (str) – The identifier of the datastore to put all the virtual disks on. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore:VCenter.

  • datastore_name (str) – The name of the datastore. This attribute was added in vSphere API 6.7.1.

class com.vmware.vcenter.vcha_client.DiskSpec(datastore=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DiskSpec class contains information to describe the storage configuration of a vCenter virtual machine. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

datastore (str or None) – The identifier of the datastore to put all the virtual disks on. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore:VCenter. This field needs to be set. If None, then see vim.vm.RelocateSpec.datastore.

class com.vmware.vcenter.vcha_client.IpFamily(string)

Bases: vmware.vapi.bindings.enum.Enum

The IpFamily class defines the Ip address family. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the IpFamily instance.

IPV4 = IpFamily(string='IPV4')

IPV4 address family. This class attribute was added in vSphere API 6.7.1.

IPV6 = IpFamily(string='IPV6')

IPv6 address family. This class attribute was added in vSphere API 6.7.1.

class com.vmware.vcenter.vcha_client.IpSpec(ip_family=None, ipv4=None, ipv6=None, default_gateway=None, dns_servers=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The IpSpec class contains IP information used to configure a network interface. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • ip_family (IpFamily) – Family of the IP address to configure the interface. This attribute was added in vSphere API 6.7.1.

  • ipv4 (Ipv4Spec) – If the family of the ip is IPV4, then this will point to IPv4 address specification. This attribute was added in vSphere API 6.7.1. This attribute is optional and it is only relevant when the value of ipFamily is IpFamily.IPV4.

  • ipv6 (Ipv6Spec) – If the family of the ip is IPV6, then this will point to IPv6 address specification. This attribute was added in vSphere API 6.7.1. This attribute is optional and it is only relevant when the value of ipFamily is IpFamily.IPV6.

  • default_gateway (str or None) – The IP address of the Gateway for this interface. This attribute was added in vSphere API 6.7.1. If None, gateway will not be used for the network interface.

  • dns_servers (list of str or None) – The list of IP addresses of the DNS servers for this interface. This list is a comma separated list. This attribute was added in vSphere API 6.7.1. If None, DNS servers will not be used for the network interface.

class com.vmware.vcenter.vcha_client.Ipv4Spec(address=None, subnet_mask=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Ipv4Spec class contains IPV4 information used to configure a network interface. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – IPV4 address to be used to configure the interface. This attribute was added in vSphere API 6.7.1.

  • subnet_mask (str or None) – The subnet mask for the interface. This attribute was added in vSphere API 6.7.1. If None and the prefix attribute is None, then an error will be reported. If None and the prefix attribute is set, then the prefix attribute will be used to create a subnet mask whose first prefix bits are 1 and the remaining bits 0. If both the subnetMask attribute and the prefix attribute are set and they do not represent the same value, then an error will be reported.

  • prefix (long or None) – The CIDR prefix for the interface. This attribute was added in vSphere API 6.7.1. If None and the subnetMask attribute is None, this an error will be reported. If None and the subnetMask attribute is set, then the subnetMask attribute will be used. If both the subnetMask attribute and the prefix attribute are set and they do not represent the same value, then an error will be reported.

class com.vmware.vcenter.vcha_client.Ipv6Spec(address=None, prefix=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Ipv6Spec class contains IPV6 information used to configure a network interface. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • address (str) – IPv6 address to be used to configure the interface. This attribute was added in vSphere API 6.7.1.

  • prefix (long) – The CIDR prefix for the interface. This attribute was added in vSphere API 6.7.1.

class com.vmware.vcenter.vcha_client.NetworkType(string)

Bases: vmware.vapi.bindings.enum.Enum

The NetworkType class defines the type of a vCenter Server network. This enumeration was added in vSphere API 6.7.1.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the NetworkType instance.

DISTRIBUTED_PORTGROUP = NetworkType(string='DISTRIBUTED_PORTGROUP')

Distributed virtual switch. This class attribute was added in vSphere API 6.7.1.

STANDARD_PORTGROUP = NetworkType(string='STANDARD_PORTGROUP')

vSphere standard portgroup network. This class attribute was added in vSphere API 6.7.1.

class com.vmware.vcenter.vcha_client.Operations(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Operations class provides methods to figure out the currently active operations and currently disabled operations in a vCenter High Availability (VCHA) cluster. This class was added in vSphere API 6.7.1.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

CLUSTER_DEPLOY_OP = 'com.vmware.vcenter.vcha.cluster.deploy'

Identifier of the cluster deploy operation. This class attribute was added in vSphere API 6.7.1.

CLUSTER_FAILOVER_OP = 'com.vmware.vcenter.vcha.cluster.failover'

Identifier of the cluster failover operation. This class attribute was added in vSphere API 6.7.1.

CLUSTER_GET_OP = 'com.vmware.vcenter.vcha.cluster.get'

Identifier of the cluster get operation. This class attribute was added in vSphere API 6.7.1.

CLUSTER_UNDEPLOY_OP = 'com.vmware.vcenter.vcha.cluster.undeploy'

Identifier of the cluster undeploy operation. This class attribute was added in vSphere API 6.7.1.

class Info(disabled=None, active=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Operations.Info class contains information about which the VCHA operations cannot be invoked in the current state of the system and the list of currently active VCHA operations. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
MODE_GET_OP = 'com.vmware.vcenter.vcha.cluster.mode.get'

Identifier of the get mode operation. This class attribute was added in vSphere API 6.7.1.

MODE_SET_OP = 'com.vmware.vcenter.vcha.cluster.mode.set'

Identifier of the set mode operation. This class attribute was added in vSphere API 6.7.1.

PASSIVE_REDEPLOY_OP = 'com.vmware.vcenter.vcha.cluster.passive.redeploy'

Identifier of the passive redeploy operation. This class attribute was added in vSphere API 6.7.1.

WITNESS_REDEPLOY_OP = 'com.vmware.vcenter.vcha.cluster.witness.redeploy'

Identifier of the witness redeploy operation. This class attribute was added in vSphere API 6.7.1.

get()

Retrieves the current active and disabled operations of a VCHA cluster. This method was added in vSphere API 6.7.1.

Return type

Operations.Info

Returns

Info structure containing the current running and disabled operations of a VCHA cluster.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user has insufficient privilege to perform the operation. Operation execution requires the System.Read privilege.

Raise

com.vmware.vapi.std.errors_client.Error If any other error occurs.

class com.vmware.vcenter.vcha_client.PlacementInfo(management_vcenter_name=None, management_vcenter_server_guid=None, vm_name=None, datacenter=None, datacenter_name=None, host=None, host_name=None, cluster=None, cluster_name=None, ha_network=None, ha_network_name=None, ha_network_type=None, management_network=None, management_network_name=None, management_network_type=None, storage=None, bios_uuid=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The PlacementInfo class contains information to describe the inventory placement of a single node of a VCHA cluster. The active node’s management vCenter server credentials are required to populate all attributes except biosUuid. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • management_vcenter_name (str) – The hostname of the vCenter server that is managing the VCHA node. This attribute was added in vSphere API 6.7.1.

  • management_vcenter_server_guid (str) – The unique identifier of the vCenter server that is managing the VCHA node. This attribute was added in vSphere API 7.0.0.1. This attribute is optional because it was added in a newer version than its parent node.

  • vm_name (str) – The virtual machine name of the VCHA node. This attribute was added in vSphere API 6.7.1.

  • datacenter (str) – The identifier of the datacenter of the VCHA node. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datacenter:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datacenter:VCenter.

  • datacenter_name (str) – The name of the datacenter of the VCHA node. This attribute was added in vSphere API 6.7.1.

  • host (str) – The identifier of the host of the VCHA node. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem:VCenter.

  • host_name (str) – The name of the host of the VCHA node. This attribute was added in vSphere API 6.7.1.

  • cluster (str or None) – The identifier of the cluster of which host is member. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource:VCenter. If None, host is a standalone host.

  • cluster_name (str or None) – The name of the cluster of which host is member. This attribute was added in vSphere API 6.7.1. If None, host is a standalone host.

  • ha_network (str or None) – The identifier of the Network object used for the HA network. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter. If None, the information is currently unavailable or the haNetwork is not configured.

  • ha_network_name (str or None) – The name of the Network object used for the HA network. This attribute was added in vSphere API 6.7.1. If None, the information is currently unavailable or the haNetwork is not configured.

  • ha_network_type (NetworkType or None) – The type of the Network object used for the HA network. This attribute was added in vSphere API 6.7.1. If None, the information is currently unavailable or the haNetwork is not configured.

  • management_network (str) – The identifier of the Network object used for the Management network. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter.

  • management_network_name (str) – The name of the Network object used for the Management network. This attribute was added in vSphere API 6.7.1.

  • management_network_type (NetworkType) – The type of the Network object used for the Management network. This attribute was added in vSphere API 6.7.1.

  • storage (DiskInfo) – The storage information of the VCHA node. This attribute was added in vSphere API 6.7.1.

  • bios_uuid (str or None) – BIOS UUID for the node. This attribute was added in vSphere API 6.7.1. If None, the information is currently unavailable.

class com.vmware.vcenter.vcha_client.PlacementSpec(name=None, folder=None, host=None, resource_pool=None, ha_network_type=None, ha_network=None, management_network_type=None, management_network=None, storage=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The PlacementSpec class contains information to describe the inventory placement of a single node of a VCHA cluster. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – The name of the VCHA node to be used for the virtual machine name. This attribute was added in vSphere API 6.7.1.

  • folder (str) – The identifier of the folder to deploy the VCHA node to. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Folder:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Folder:VCenter.

  • host (str or None) – The identifier of the host to deploy the VCHA node to. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem:VCenter. If None, see vim.vm.RelocateSpec.host.

  • resource_pool (str or None) – The identifier of the resource pool to deploy the VCHA node to. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ResourcePool:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ResourcePool:VCenter. If None, then the active node’s resource pool will be used.

  • ha_network_type (NetworkType or None) – The type of the Network object used by the HA network. If the PlacementSpec.ha_network attribute is set, then the PlacementSpec.ha_network_type field must be set. If the PlacementSpec.ha_network attribute is None, then the PlacementSpec.ha_network_type attribute is ignored. This attribute was added in vSphere API 6.7.1. If None and the PlacementSpec.ha_network attribute is unset, then the same network present on the Active node virtual machine is used to deploy the virtual machine with an assumption that the network is present on the destination. If None and the PlacementSpec.ha_network attribute is set, then an error is reported.

  • ha_network (str or None) – The identifier of the Network object used for the HA network. If the PlacementSpec.ha_network attribute is set, then the {#link #haNetworkType} attribute must be set. If the PlacementSpec.ha_network attribute is None, then the PlacementSpec.ha_network_type attribute is ignored. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter. If None and the PlacementSpec.ha_network_type attribute is unset, then the same network present on the Active node virtual machine is used to deploy the virtual machine with an assumption that the network is present on the destination.

  • management_network_type (NetworkType or None) – The type of the Network object used by the Management network. If the PlacementSpec.management_network attribute is set, then the {#link #managementNetworkType} field must be set. If the PlacementSpec.management_network attribute is None, then the PlacementSpec.management_network_type attribute is ignored. This attribute was added in vSphere API 6.7.1. If None and the PlacementSpec.management_network attribute is unset, then the same network present on the Active node virtual machine is used to deploy the virtual machine with an assumption that the network is present on the destination. If None and the PlacementSpec.management_network attribute is set, then an error is reported.

  • management_network (str or None) – The identifier of the Network object used for the Management network. If the PlacementSpec.management_network attribute is set, then the PlacementSpec.management_network_type attribute must be set. If the PlacementSpec.management_network attribute is None, then the PlacementSpec.management_network_type attribute is ignored. This attribute was added in vSphere API 6.7.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter. If None and the PlacementSpec.management_network_type attribute is unset, then the same network present on the Active node virtual machine is used to deploy the virtual machine with an assumption that the network is present on the destination.

  • storage (DiskSpec or None) – The storage specification to deploy the VCHA node to. This attribute was added in vSphere API 6.7.1. If None, see vim.vm.RelocateSpec.datastore.

class com.vmware.vcenter.vcha_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.vm_client module

The com.vmware.vcenter.vm_client module provides classes for managing virtual machines.

class com.vmware.vcenter.vm_client.DataSets(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The DataSets class provides methods for sharing information between a virtual machine and its guest operating system.

See the VMware Guest SDK Programming Guide for details on using DataSets from within a virtual machine.

Information is grouped into data sets, each of which contains key-value entries comprising the data. It’s expected that each application using the service will have at least one unique data set in which to store its data to avoid conflict with other applications. Each data set has attributes defining its access control and interoperability configuration.

It’s not recommended that sensitive data (for example, passwords or private keys) be stored in plain-text. The data will be visible to other applications, running both on the management network and within the guest. The data can also be exposed by backups or templates.

Data set support requires the virtual machine be at virtual hardware version Hardware.Version.VMX_20 or later.

Data sets should only be modified by the application that creates them. Otherwise the application may stop working.. This class was added in vSphere API 8.0.0.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Access(string)

Bases: vmware.vapi.bindings.enum.Enum

Possible Entry access modes. This enumeration was added in vSphere API 8.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Access instance.

NONE = Access(string='NONE')

No access is allowed for data set Entries. This class attribute was added in vSphere API 8.0.0.0.

READ_ONLY = Access(string='READ_ONLY')

Only read access is allowed for data set Entries. This class attribute was added in vSphere API 8.0.0.0.

READ_WRITE = Access(string='READ_WRITE')

Full read, write and delete access is allowed on data set Entries. This class attribute was added in vSphere API 8.0.0.0.

class CreateSpec(name=None, description=None, host=None, guest=None, omit_from_snapshot_and_clone=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DataSets.CreateSpec class describes a data set to be created. This class was added in vSphere API 8.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – The name of the data set. It is recommended that this value take the form “com.company.project” to avoid conflict with other uses.. This attribute was added in vSphere API 8.0.0.0.

  • description (str) – A description of how the data set is used by its creator. This field can contain up to 1024 bytes. This attribute was added in vSphere API 8.0.0.0.

  • host (DataSets.Access) –

    Host access control.

    Controls access to the data set by the com.vmware.vcenter.vm.data_sets_client.Entries methods.. This attribute was added in vSphere API 8.0.0.0.

  • guest (DataSets.Access) –

    Guest access control.

    Controls access to the data set from the in-guest APIs.. This attribute was added in vSphere API 8.0.0.0.

  • omit_from_snapshot_and_clone (bool or None) – If set, the data set is considered a property of the virtual machine, and is not included in a snapshot operation or when the virtual machine is cloned. When a virtual machine is reverted to a snapshot, any data set with {\@link #omitFromSnapshotAndClone) set will be destroyed. Any data set with DataSets.CreateSpec.omit_from_snapshot_and_clone None will be restored to the state when the snapshot was created. This attribute was added in vSphere API 8.0.0.0. If None, the data set is not copied when a virtual machine is cloned or a snapshot is taken.

class Info(name=None, description=None, host=None, guest=None, used=None, omit_from_snapshot_and_clone=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DataSets.Info class describes a data set. This class was added in vSphere API 8.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – The name of the data set. This attribute was added in vSphere API 8.0.0.0.

  • description (str) – A description of how the data set is used by its creator. This attribute was added in vSphere API 8.0.0.0.

  • host (DataSets.Access) –

    Host access control.

    Controls access to the data set by the com.vmware.vcenter.vm.data_sets_client.Entries methods.. This attribute was added in vSphere API 8.0.0.0.

  • guest (DataSets.Access) –

    Guest access control.

    Controls access to the data set from in-guest APIs.. This attribute was added in vSphere API 8.0.0.0.

  • used (long) – The total size in bytes of the Entry data in use by this data set. This attribute was added in vSphere API 8.0.0.0.

  • omit_from_snapshot_and_clone (bool) – If set, the data set is considered a property of the virtual machine, and is not included in a snapshot operation or when the virtual machine is cloned. When a virtual machine is reverted to a snapshot, any data set with {\@link #omitFromSnapshotAndClone) set will be destroyed. Any data set with DataSets.Info.omit_from_snapshot_and_clone None will be restored to the state when the snapshot was created. This attribute was added in vSphere API 8.0.0.0.

class Summary(data_set=None, name=None, description=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

Basic data set information. This class was added in vSphere API 8.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • data_set (str) – The identifier of the data set. This attribute was added in vSphere API 8.0.0.0. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.vm.DataSet. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.vm.DataSet.

  • name (str) – The name of the data set. This attribute was added in vSphere API 8.0.0.0.

  • description (str) – The description of the data set. This attribute was added in vSphere API 8.0.0.0.

class UpdateSpec(description=None, host=None, guest=None, omit_from_snapshot_and_clone=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The DataSets.UpdateSpec class describes attibutes of a data set that can be modified. This class was added in vSphere API 8.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • description (str or None) – A description of how the data set is used by its creator. This field can contain up to 1024 bytes. This attribute was added in vSphere API 8.0.0.0. If set, the value is changed.

  • host (DataSets.Access or None) – The access control from the host. This attribute was added in vSphere API 8.0.0.0. If set, the value is changed.

  • guest (DataSets.Access or None) – The access control from the guest. This attribute was added in vSphere API 8.0.0.0. If set, the value is changed.

  • omit_from_snapshot_and_clone (bool or None) – If set, the data set is considered a property of the virtual machine, and is not included in a snapshot operation or when the virtual machine is cloned. When a virtual machine is reverted to a snapshot, any data set with {\@link #omitFromSnapshotAndClone) set will be destroyed. Any data set with DataSets.UpdateSpec.omit_from_snapshot_and_clone None will be restored to the state when the snapshot was created. This attribute was added in vSphere API 8.0.0.0. If set, the value is changed.

create(vm, spec)

Creates a new data set. This method was added in vSphere API 8.0.0.0.

Parameters
  • vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

  • spec (DataSets.CreateSpec) – Specification of the data set to be created.

Return type

str

Returns

The identifier of the new data set. The return value will be an identifier for the resource type: com.vmware.vcenter.vm.DataSet.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the data set with the same name already exists.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the specification is incorrect.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is in a state that doesn’t allow modifications, for example suspended.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if the new data set requires more resources than are available.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the virtual hardware version of the virtual machine does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unsupported if the ESXi host version does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.DataSets.DataSetCreate.

delete(vm, data_set, force=None)

Delete a data set. This method was added in vSphere API 8.0.0.0.

Parameters
  • vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

  • data_set (str) – Identifier of the data set to be deleted. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.DataSet.

  • force (bool or None) – If true, delete the data set even if it is not empty. If None a com.vmware.vapi.std.errors_client.ResourceInUse exception will be reported if the data set is not empty. This is the equivalent of passing the value false.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is in a state that doesn’t allow modifications, for example suspended.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.NotFound if the data set is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if the data set is not empty and force is not set.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the virtual hardware version of the virtual machine does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unsupported if the ESXi host version does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.DataSets.DataSetDelete.

get(vm, data_set)

Returns information describing a data set. This method was added in vSphere API 8.0.0.0.

Parameters
  • vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

  • data_set (str) – Identifier of the data set to be queried. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.DataSet.

Return type

DataSets.Info

Returns

Details about the data set.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.NotFound if the data set is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the virtual hardware version of the virtual machine does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unsupported if the ESXi host version does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.DataSets.DataSetGet.

list(vm)

Lists the data sets of a virtual machine. This method was added in vSphere API 8.0.0.0.

Parameters

vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

list of DataSets.Summary

Returns

The list of data sets.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the virtual hardware version of the virtual machine does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unsupported if the ESXi host version does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.DataSets.DataSetList.

update(vm, data_set, spec)

Modifies the attributes of a data set. This method was added in vSphere API 8.0.0.0.

Parameters
  • vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

  • data_set (str) – Identifier of the data set to be queried. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.DataSet.

  • spec (DataSets.UpdateSpec) – new attributes of the data set. Data sets should only be modified by the application that creates them. Otherwise the application may stop working.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if any of the new attributes are invalid.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is in a state that doesn’t allow modification, for example suspendeds.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.NotFound if the data set is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if the new data set attributes requires more resources than are available.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the virtual hardware version of the virtual machine does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unsupported if the ESXi host version does not support DataSets

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.DataSets.DataSetUpdate.

class com.vmware.vcenter.vm_client.GuestOS(string)

Bases: vmware.vapi.bindings.enum.Enum

The GuestOS class defines the valid guest operating system types used for configuring a virtual machine.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the GuestOS instance.

ALMALINUX_64 = GuestOS(string='ALMALINUX_64')

AlmaLinux (64-bit). This class attribute was added in vSphere API 8.0.0.1.

AMAZONLINUX2_64 = GuestOS(string='AMAZONLINUX2_64')

Amazon Linux 2 (64 bit). This class attribute was added in vSphere API 6.7.1.

AMAZONLINUX3_64 = GuestOS(string='AMAZONLINUX3_64')

Amazon Linux 3 (64 bit). This class attribute was added in vSphere API 7.0.1.0.

ASIANUX_3 = GuestOS(string='ASIANUX_3')

Asianux Server 3

ASIANUX_3_64 = GuestOS(string='ASIANUX_3_64')

Asianux Server 3 (64 bit)

ASIANUX_4 = GuestOS(string='ASIANUX_4')

Asianux Server 4

ASIANUX_4_64 = GuestOS(string='ASIANUX_4_64')

Asianux Server 4 (64 bit)

ASIANUX_5_64 = GuestOS(string='ASIANUX_5_64')

Asianux Server 5 (64 bit)

ASIANUX_7_64 = GuestOS(string='ASIANUX_7_64')

Asianux Server 7 (64 bit)

ASIANUX_8_64 = GuestOS(string='ASIANUX_8_64')

Asianux Server 8 (64 bit). This class attribute was added in vSphere API 6.7.

ASIANUX_9_64 = GuestOS(string='ASIANUX_9_64')

Asianux Server 9 (64 bit). This class attribute was added in vSphere API 7.0.1.0.

CENTOS = GuestOS(string='CENTOS')

CentOS 4/5

CENTOS_6 = GuestOS(string='CENTOS_6')

CentOS 6

CENTOS_64 = GuestOS(string='CENTOS_64')

CentOS 4/5 (64-bit)

CENTOS_6_64 = GuestOS(string='CENTOS_6_64')

CentOS 6 (64-bit)

CENTOS_7 = GuestOS(string='CENTOS_7')

CentOS 7

CENTOS_7_64 = GuestOS(string='CENTOS_7_64')

CentOS 7 (64-bit)

CENTOS_8_64 = GuestOS(string='CENTOS_8_64')

CentOS 8 (64-bit). This class attribute was added in vSphere API 6.7.

CENTOS_9_64 = GuestOS(string='CENTOS_9_64')

CentOS 9 (64-bit). This class attribute was added in vSphere API 7.0.1.0.

COREOS_64 = GuestOS(string='COREOS_64')

CoreOS Linux (64 bit)

CRXPOD_1 = GuestOS(string='CRXPOD_1')

CRX Pod 1. This class attribute was added in vSphere API 7.0.0.0.

DARWIN = GuestOS(string='DARWIN')

Mac OS 10.5

DARWIN_10 = GuestOS(string='DARWIN_10')

Mac OS 10.6

DARWIN_10_64 = GuestOS(string='DARWIN_10_64')

Mac OS 10.6 (64 bit)

DARWIN_11 = GuestOS(string='DARWIN_11')

Mac OS 10.7

DARWIN_11_64 = GuestOS(string='DARWIN_11_64')

Mac OS 10.7 (64 bit)

DARWIN_12_64 = GuestOS(string='DARWIN_12_64')

Mac OS 10.8 (64 bit)

DARWIN_13_64 = GuestOS(string='DARWIN_13_64')

Mac OS 10.9 (64 bit)

DARWIN_14_64 = GuestOS(string='DARWIN_14_64')

Mac OS 10.10 (64 bit)

DARWIN_15_64 = GuestOS(string='DARWIN_15_64')

Mac OS 10.11 (64 bit)

DARWIN_16_64 = GuestOS(string='DARWIN_16_64')

Mac OS 10.12 (64 bit)

DARWIN_17_64 = GuestOS(string='DARWIN_17_64')

Mac OS 10.13 (64 bit). This class attribute was added in vSphere API 6.7.

DARWIN_18_64 = GuestOS(string='DARWIN_18_64')

Mac OS 10.14 (64 bit). This class attribute was added in vSphere API 6.7.

DARWIN_19_64 = GuestOS(string='DARWIN_19_64')

Mac OS 10.15 (64 bit). This class attribute was added in vSphere API 7.0.0.0.

DARWIN_20_64 = GuestOS(string='DARWIN_20_64')

Mac OS 11 (64 bit). This class attribute was added in vSphere API 7.0.1.0.

DARWIN_21_64 = GuestOS(string='DARWIN_21_64')

Mac OS 12 (64 bit). This class attribute was added in vSphere API 7.0.1.0.

DARWIN_22_64 = GuestOS(string='DARWIN_22_64')

Mac OS 13 (64 bit). This class attribute was added in vSphere API 8.0.0.1.

DARWIN_23_64 = GuestOS(string='DARWIN_23_64')

Mac OS 14 (64 bit). This class attribute was added in vSphere API 8.0.0.1.

DARWIN_64 = GuestOS(string='DARWIN_64')

Mac OS 10.5 (64 bit)

DEBIAN_10 = GuestOS(string='DEBIAN_10')

Debian GNU/Linux 10

DEBIAN_10_64 = GuestOS(string='DEBIAN_10_64')

Debian GNU/Linux 10 (64 bit)

DEBIAN_11 = GuestOS(string='DEBIAN_11')

Debian GNU/Linux 11. This class attribute was added in vSphere API 7.0.0.0.

DEBIAN_11_64 = GuestOS(string='DEBIAN_11_64')

Debian GNU/Linux 11 (64 bit). This class attribute was added in vSphere API 7.0.0.0.

DEBIAN_12 = GuestOS(string='DEBIAN_12')

Debian GNU/Linux 12. This class attribute was added in vSphere API 8.0.0.1.

DEBIAN_12_64 = GuestOS(string='DEBIAN_12_64')

Debian GNU/Linux 12 (64 bit). This class attribute was added in vSphere API 8.0.0.1.

DEBIAN_4 = GuestOS(string='DEBIAN_4')

Debian GNU/Linux 4

DEBIAN_4_64 = GuestOS(string='DEBIAN_4_64')

Debian GNU/Linux 4 (64 bit)

DEBIAN_5 = GuestOS(string='DEBIAN_5')

Debian GNU/Linux 5

DEBIAN_5_64 = GuestOS(string='DEBIAN_5_64')

Debian GNU/Linux 5 (64 bit)

DEBIAN_6 = GuestOS(string='DEBIAN_6')

Debian GNU/Linux 6

DEBIAN_6_64 = GuestOS(string='DEBIAN_6_64')

Debian GNU/Linux 6 (64 bit)

DEBIAN_7 = GuestOS(string='DEBIAN_7')

Debian GNU/Linux 7

DEBIAN_7_64 = GuestOS(string='DEBIAN_7_64')

Debian GNU/Linux 7 (64 bit)

DEBIAN_8 = GuestOS(string='DEBIAN_8')

Debian GNU/Linux 8

DEBIAN_8_64 = GuestOS(string='DEBIAN_8_64')

Debian GNU/Linux 8 (64 bit)

DEBIAN_9 = GuestOS(string='DEBIAN_9')

Debian GNU/Linux 9

DEBIAN_9_64 = GuestOS(string='DEBIAN_9_64')

Debian GNU/Linux 9 (64 bit)

DOS = GuestOS(string='DOS')

MS-DOS.

ECOMSTATION = GuestOS(string='ECOMSTATION')

eComStation 1.x

ECOMSTATION_2 = GuestOS(string='ECOMSTATION_2')

eComStation 2.0

FEDORA = GuestOS(string='FEDORA')

Fedora Linux

FEDORA_64 = GuestOS(string='FEDORA_64')

Fedora Linux (64 bit)

FREEBSD = GuestOS(string='FREEBSD')

FreeBSD 10 or earlier

FREEBSD_11 = GuestOS(string='FREEBSD_11')

FreeBSD 11. This class attribute was added in vSphere API 6.7.

FREEBSD_11_64 = GuestOS(string='FREEBSD_11_64')

FreeBSD 11 x64. This class attribute was added in vSphere API 6.7.

FREEBSD_12 = GuestOS(string='FREEBSD_12')

FreeBSD 12. This class attribute was added in vSphere API 6.7.

FREEBSD_12_64 = GuestOS(string='FREEBSD_12_64')

FreeBSD 12 x64. This class attribute was added in vSphere API 6.7.

FREEBSD_13 = GuestOS(string='FREEBSD_13')

FreeBSD 13. This class attribute was added in vSphere API 7.0.1.0.

FREEBSD_13_64 = GuestOS(string='FREEBSD_13_64')

FreeBSD 13 x64. This class attribute was added in vSphere API 7.0.1.0.

FREEBSD_14 = GuestOS(string='FREEBSD_14')

FreeBSD 14 or later. This class attribute was added in vSphere API 8.0.0.1.

FREEBSD_14_64 = GuestOS(string='FREEBSD_14_64')

FreeBSD 14 x64 or later. This class attribute was added in vSphere API 8.0.0.1.

FREEBSD_64 = GuestOS(string='FREEBSD_64')

FreeBSD 10 x64 or earlier

GENERIC_LINUX = GuestOS(string='GENERIC_LINUX')

Other Linux

MANDRAKE = GuestOS(string='MANDRAKE')

Mandrake Linux

MANDRIVA = GuestOS(string='MANDRIVA')

Mandriva Linux

MANDRIVA_64 = GuestOS(string='MANDRIVA_64')

Mandriva Linux (64 bit)

NETWARE_4 = GuestOS(string='NETWARE_4')

Novell NetWare 4

NETWARE_5 = GuestOS(string='NETWARE_5')

Novell NetWare 5.1

NETWARE_6 = GuestOS(string='NETWARE_6')

Novell NetWare 6.x

NLD_9 = GuestOS(string='NLD_9')

Novell Linux Desktop 9

OES = GuestOS(string='OES')

Open Enterprise Server

OPENSERVER_5 = GuestOS(string='OPENSERVER_5')

SCO OpenServer 5

OPENSERVER_6 = GuestOS(string='OPENSERVER_6')

SCO OpenServer 6

OPENSUSE = GuestOS(string='OPENSUSE')

OpenSUSE Linux

OPENSUSE_64 = GuestOS(string='OPENSUSE_64')

OpenSUSE Linux (64 bit)

ORACLE_LINUX = GuestOS(string='ORACLE_LINUX')

Oracle Linux 4/5

ORACLE_LINUX_6 = GuestOS(string='ORACLE_LINUX_6')

Oracle Linux 6

ORACLE_LINUX_64 = GuestOS(string='ORACLE_LINUX_64')

Oracle Linux 4/5 (64-bit)

ORACLE_LINUX_6_64 = GuestOS(string='ORACLE_LINUX_6_64')

Oracle Linux 6 (64-bit)

ORACLE_LINUX_7 = GuestOS(string='ORACLE_LINUX_7')

Oracle Linux 7

ORACLE_LINUX_7_64 = GuestOS(string='ORACLE_LINUX_7_64')

Oracle Linux 7 (64-bit)

ORACLE_LINUX_8_64 = GuestOS(string='ORACLE_LINUX_8_64')

Oracle Linux 8 (64-bit). This class attribute was added in vSphere API 6.7.

ORACLE_LINUX_9_64 = GuestOS(string='ORACLE_LINUX_9_64')

Oracle Linux 9 (64-bit). This class attribute was added in vSphere API 7.0.1.0.

OS2 = GuestOS(string='OS2')

OS/2

OTHER = GuestOS(string='OTHER')

Other Operating System

OTHER_24X_LINUX = GuestOS(string='OTHER_24X_LINUX')

Linux 2.4x Kernel

OTHER_24X_LINUX_64 = GuestOS(string='OTHER_24X_LINUX_64')

Linux 2.4x Kernel (64 bit) (experimental)

OTHER_26X_LINUX = GuestOS(string='OTHER_26X_LINUX')

Linux 2.6x Kernel

OTHER_26X_LINUX_64 = GuestOS(string='OTHER_26X_LINUX_64')

Linux 2.6x Kernel (64 bit) (experimental)

OTHER_3X_LINUX = GuestOS(string='OTHER_3X_LINUX')

Linux 3.x Kernel

OTHER_3X_LINUX_64 = GuestOS(string='OTHER_3X_LINUX_64')

Linux 3.x Kernel (64 bit)

OTHER_4X_LINUX = GuestOS(string='OTHER_4X_LINUX')

Linux 4.x Kernel. This class attribute was added in vSphere API 6.7.

OTHER_4X_LINUX_64 = GuestOS(string='OTHER_4X_LINUX_64')

Linux 4.x Kernel (64 bit). This class attribute was added in vSphere API 6.7.

OTHER_5X_LINUX = GuestOS(string='OTHER_5X_LINUX')

Linux 5.x Kernel. This class attribute was added in vSphere API 7.0.1.0.

OTHER_5X_LINUX_64 = GuestOS(string='OTHER_5X_LINUX_64')

Linux 5.x Kernel (64 bit). This class attribute was added in vSphere API 7.0.1.0.

OTHER_64 = GuestOS(string='OTHER_64')

Other Operating System (64 bit) (experimental)

OTHER_6X_LINUX = GuestOS(string='OTHER_6X_LINUX')

Linux 6.x Kernel. This class attribute was added in vSphere API 8.0.0.1.

OTHER_6X_LINUX_64 = GuestOS(string='OTHER_6X_LINUX_64')

Linux 6.x Kernel (64 bit). This class attribute was added in vSphere API 8.0.0.1.

OTHER_LINUX = GuestOS(string='OTHER_LINUX')

Linux 2.2x Kernel

OTHER_LINUX_64 = GuestOS(string='OTHER_LINUX_64')

Linux (64 bit) (experimental)

REDHAT = GuestOS(string='REDHAT')

Red Hat Linux 2.1

RHEL_2 = GuestOS(string='RHEL_2')

Red Hat Enterprise Linux 2

RHEL_3 = GuestOS(string='RHEL_3')

Red Hat Enterprise Linux 3

RHEL_3_64 = GuestOS(string='RHEL_3_64')

Red Hat Enterprise Linux 3 (64 bit)

RHEL_4 = GuestOS(string='RHEL_4')

Red Hat Enterprise Linux 4

RHEL_4_64 = GuestOS(string='RHEL_4_64')

Red Hat Enterprise Linux 4 (64 bit)

RHEL_5 = GuestOS(string='RHEL_5')

Red Hat Enterprise Linux 5

RHEL_5_64 = GuestOS(string='RHEL_5_64')

Red Hat Enterprise Linux 5 (64 bit) (experimental)

RHEL_6 = GuestOS(string='RHEL_6')

Red Hat Enterprise Linux 6

RHEL_6_64 = GuestOS(string='RHEL_6_64')

Red Hat Enterprise Linux 6 (64 bit)

RHEL_7 = GuestOS(string='RHEL_7')

Red Hat Enterprise Linux 7

RHEL_7_64 = GuestOS(string='RHEL_7_64')

Red Hat Enterprise Linux 7 (64 bit)

RHEL_8_64 = GuestOS(string='RHEL_8_64')

Red Hat Enterprise Linux 8 (64 bit). This class attribute was added in vSphere API 6.7.

RHEL_9_64 = GuestOS(string='RHEL_9_64')

Red Hat Enterprise Linux 9 (64 bit). This class attribute was added in vSphere API 7.0.1.0.

ROCKYLINUX_64 = GuestOS(string='ROCKYLINUX_64')

Rocky Linux (64-bit). This class attribute was added in vSphere API 8.0.0.1.

SJDS = GuestOS(string='SJDS')

Sun Java Desktop System

SLES = GuestOS(string='SLES')

Suse Linux Enterprise Server 9

SLES_10 = GuestOS(string='SLES_10')

Suse linux Enterprise Server 10

SLES_10_64 = GuestOS(string='SLES_10_64')

Suse Linux Enterprise Server 10 (64 bit) (experimental)

SLES_11 = GuestOS(string='SLES_11')

Suse linux Enterprise Server 11

SLES_11_64 = GuestOS(string='SLES_11_64')

Suse Linux Enterprise Server 11 (64 bit)

SLES_12 = GuestOS(string='SLES_12')

Suse linux Enterprise Server 12

SLES_12_64 = GuestOS(string='SLES_12_64')

Suse Linux Enterprise Server 12 (64 bit)

SLES_15_64 = GuestOS(string='SLES_15_64')

Suse Linux Enterprise Server 15 (64 bit). This class attribute was added in vSphere API 6.7.

SLES_16_64 = GuestOS(string='SLES_16_64')

Suse Linux Enterprise Server 16 (64 bit). This class attribute was added in vSphere API 7.0.1.0.

SLES_64 = GuestOS(string='SLES_64')

Suse Linux Enterprise Server 9 (64 bit)

SOLARIS_10 = GuestOS(string='SOLARIS_10')

Solaris 10 (32 bit) (experimental)

SOLARIS_10_64 = GuestOS(string='SOLARIS_10_64')

Solaris 10 (64 bit) (experimental)

SOLARIS_11_64 = GuestOS(string='SOLARIS_11_64')

Solaris 11 (64 bit)

SOLARIS_6 = GuestOS(string='SOLARIS_6')

Solaris 6

SOLARIS_7 = GuestOS(string='SOLARIS_7')

Solaris 7

SOLARIS_8 = GuestOS(string='SOLARIS_8')

Solaris 8

SOLARIS_9 = GuestOS(string='SOLARIS_9')

Solaris 9

SUSE = GuestOS(string='SUSE')

Suse Linux

SUSE_64 = GuestOS(string='SUSE_64')

Suse Linux (64 bit)

TURBO_LINUX = GuestOS(string='TURBO_LINUX')

Turbolinux

TURBO_LINUX_64 = GuestOS(string='TURBO_LINUX_64')

Turbolinux (64 bit)

UBUNTU = GuestOS(string='UBUNTU')

Ubuntu Linux

UBUNTU_64 = GuestOS(string='UBUNTU_64')

Ubuntu Linux (64 bit)

UNIXWARE_7 = GuestOS(string='UNIXWARE_7')

SCO UnixWare 7

VMKERNEL = GuestOS(string='VMKERNEL')

VMware ESX 4

VMKERNEL_5 = GuestOS(string='VMKERNEL_5')

VMware ESX 5

VMKERNEL_6 = GuestOS(string='VMKERNEL_6')

VMware ESX 6

VMKERNEL_65 = GuestOS(string='VMKERNEL_65')

VMware ESXi 6.5 AND ESXi 6.7.

VMKERNEL_7 = GuestOS(string='VMKERNEL_7')

VMware ESX 7. This class attribute was added in vSphere API 7.0.0.0.

VMKERNEL_8 = GuestOS(string='VMKERNEL_8')

VMware ESX 8. This class attribute was added in vSphere API 8.0.0.1.

VMWARE_PHOTON_64 = GuestOS(string='VMWARE_PHOTON_64')

VMware Photon (64 bit)

WINDOWS_11_64 = GuestOS(string='WINDOWS_11_64')

Windows 11 (64 bit). This class attribute was added in vSphere API 8.0.0.1.

WINDOWS_12_64 = GuestOS(string='WINDOWS_12_64')

Windows 12 (64 bit). This class attribute was added in vSphere API 8.0.0.1.

WINDOWS_7 = GuestOS(string='WINDOWS_7')

Windows 7

WINDOWS_7_64 = GuestOS(string='WINDOWS_7_64')

Windows 7 (64 bit)

WINDOWS_7_SERVER_64 = GuestOS(string='WINDOWS_7_SERVER_64')

Windows Server 2008 R2 (64 bit)

WINDOWS_8 = GuestOS(string='WINDOWS_8')

Windows 8

WINDOWS_8_64 = GuestOS(string='WINDOWS_8_64')

Windows 8 (64 bit)

WINDOWS_8_SERVER_64 = GuestOS(string='WINDOWS_8_SERVER_64')

Windows 8 Server (64 bit)

WINDOWS_9 = GuestOS(string='WINDOWS_9')

Windows 10

WINDOWS_9_64 = GuestOS(string='WINDOWS_9_64')

Windows 10 (64 bit)

WINDOWS_9_SERVER_64 = GuestOS(string='WINDOWS_9_SERVER_64')

Windows 10 Server (64 bit)

WINDOWS_HYPERV = GuestOS(string='WINDOWS_HYPERV')

Windows Hyper-V

WINDOWS_SERVER_2019 = GuestOS(string='WINDOWS_SERVER_2019')

Windows Server 2019. This class attribute was added in vSphere API 7.0.0.0.

WINDOWS_SERVER_2021 = GuestOS(string='WINDOWS_SERVER_2021')

Windows Server 2022. This class attribute was added in vSphere API 7.0.1.0.

WINDOWS_SERVER_2025 = GuestOS(string='WINDOWS_SERVER_2025')

Windows Server 2025. This class attribute was added in vSphere API 8.0.0.1.

WIN_2000_ADV_SERV = GuestOS(string='WIN_2000_ADV_SERV')

Windows 2000 Advanced Server

WIN_2000_PRO = GuestOS(string='WIN_2000_PRO')

Windows 2000 Professional

WIN_2000_SERV = GuestOS(string='WIN_2000_SERV')

Windows 2000 Server

WIN_31 = GuestOS(string='WIN_31')

Windows 3.1

WIN_95 = GuestOS(string='WIN_95')

Windows 95

WIN_98 = GuestOS(string='WIN_98')

Windows 98

WIN_LONGHORN = GuestOS(string='WIN_LONGHORN')

Windows Longhorn (experimental)

WIN_LONGHORN_64 = GuestOS(string='WIN_LONGHORN_64')

Windows Longhorn (64 bit) (experimental)

WIN_ME = GuestOS(string='WIN_ME')

Windows Millennium Edition

WIN_NET_BUSINESS = GuestOS(string='WIN_NET_BUSINESS')

Windows Small Business Server 2003

WIN_NET_DATACENTER = GuestOS(string='WIN_NET_DATACENTER')

Windows Server 2003, Datacenter Edition

WIN_NET_DATACENTER_64 = GuestOS(string='WIN_NET_DATACENTER_64')

Windows Server 2003, Datacenter Edition (64 bit) (experimental)

WIN_NET_ENTERPRISE = GuestOS(string='WIN_NET_ENTERPRISE')

Windows Server 2003, Enterprise Edition

WIN_NET_ENTERPRISE_64 = GuestOS(string='WIN_NET_ENTERPRISE_64')

Windows Server 2003, Enterprise Edition (64 bit)

WIN_NET_STANDARD = GuestOS(string='WIN_NET_STANDARD')

Windows Server 2003, Standard Edition

WIN_NET_STANDARD_64 = GuestOS(string='WIN_NET_STANDARD_64')

Windows Server 2003, Standard Edition (64 bit)

WIN_NET_WEB = GuestOS(string='WIN_NET_WEB')

Windows Server 2003, Web Edition

WIN_NT = GuestOS(string='WIN_NT')

Windows NT 4

WIN_VISTA = GuestOS(string='WIN_VISTA')

Windows Vista

WIN_VISTA_64 = GuestOS(string='WIN_VISTA_64')

Windows Vista (64 bit)

WIN_XP_HOME = GuestOS(string='WIN_XP_HOME')

Windows XP Home Edition

WIN_XP_PRO = GuestOS(string='WIN_XP_PRO')

Windows XP Professional

WIN_XP_PRO_64 = GuestOS(string='WIN_XP_PRO_64')

Windows XP Professional Edition (64 bit)

class com.vmware.vcenter.vm_client.GuestOSFamily(string)

Bases: vmware.vapi.bindings.enum.Enum

The GuestOSFamily class defines the valid guest operating system family types reported by a virtual machine. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the GuestOSFamily instance.

DARWIN = GuestOSFamily(string='DARWIN')

Mac OS operating system. This class attribute was added in vSphere API 6.7.

LINUX = GuestOSFamily(string='LINUX')

Linux operating system. This class attribute was added in vSphere API 6.7.

NETWARE = GuestOSFamily(string='NETWARE')

Novell Netware. This class attribute was added in vSphere API 6.7.

OTHER = GuestOSFamily(string='OTHER')

Other operating systems. This class attribute was added in vSphere API 6.7.

SOLARIS = GuestOSFamily(string='SOLARIS')

Solaris operating system. This class attribute was added in vSphere API 6.7.

WINDOWS = GuestOSFamily(string='WINDOWS')

Windows operating system. This class attribute was added in vSphere API 6.7.

class com.vmware.vcenter.vm_client.Hardware(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Hardware class provides methods for configuring the virtual hardware of a virtual machine.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(version=None, upgrade_policy=None, upgrade_version=None, upgrade_status=None, upgrade_error=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Hardware.Info class contains information related to the virtual hardware of a virtual machine.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
class UpdateSpec(upgrade_policy=None, upgrade_version=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Hardware.UpdateSpec class describes the updates to virtual hardware settings of a virtual machine.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • upgrade_policy (Hardware.UpgradePolicy or None) –

    Scheduled upgrade policy.

    If set to Hardware.UpgradePolicy.NEVER, the Hardware.Info.upgrade_version attribute will be reset to None. If None, the value is unchanged.

  • upgrade_version (Hardware.Version or None) –

    Target hardware version to be used on the next scheduled virtual hardware upgrade.

    If specified, this attribute must represent a newer virtual hardware version than the current virtual hardware version reported in Hardware.Info.version. If Hardware.UpdateSpec.upgrade_policy is set to Hardware.UpgradePolicy.NEVER, this attribute must be None. Otherwise, if this attribute is None, default to the most recent virtual hardware version supported by the server.

class UpgradePolicy(string)

Bases: vmware.vapi.bindings.enum.Enum

The Hardware.UpgradePolicy class defines the valid virtual hardware upgrade policies for a virtual machine.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the UpgradePolicy instance.

AFTER_CLEAN_SHUTDOWN = UpgradePolicy(string='AFTER_CLEAN_SHUTDOWN')

Run scheduled upgrade when the virtual machine is powered on after a clean shutdown of the guest operating system.

ALWAYS = UpgradePolicy(string='ALWAYS')

Run scheduled upgrade when the virtual machine is powered on.

NEVER = UpgradePolicy(string='NEVER')

Do not upgrade the virtual machine when it is powered on.

class UpgradeStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The Hardware.UpgradeStatus class defines the valid virtual hardware upgrade statuses for a virtual machine.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the UpgradeStatus instance.

FAILED = UpgradeStatus(string='FAILED')

The most recent scheduled upgrade was not successful.

NONE = UpgradeStatus(string='NONE')

No scheduled upgrade has been attempted.

PENDING = UpgradeStatus(string='PENDING')

Upgrade is scheduled but has not yet been run.

SUCCESS = UpgradeStatus(string='SUCCESS')

The most recent scheduled upgrade was successful.

class Version(string)

Bases: vmware.vapi.bindings.enum.Enum

The Hardware.Version class defines the valid virtual hardware versions for a virtual machine. See https://kb.vmware.com/s/article/1003746 (Virtual machine hardware versions (1003746)).

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Version instance.

VMX_03 = Version(string='VMX_03')

Hardware version 3, first supported in ESXi 2.5.

VMX_04 = Version(string='VMX_04')

Hardware version 4, first supported in ESXi 3.0.

VMX_06 = Version(string='VMX_06')

Hardware version 6, first supported in WS 6.0.

VMX_07 = Version(string='VMX_07')

Hardware version 7, first supported in ESXi 4.0.

VMX_08 = Version(string='VMX_08')

Hardware version 8, first supported in ESXi 5.0.

VMX_09 = Version(string='VMX_09')

Hardware version 9, first supported in ESXi 5.1.

VMX_10 = Version(string='VMX_10')

Hardware version 10, first supported in ESXi 5.5.

VMX_11 = Version(string='VMX_11')

Hardware version 11, first supported in ESXi 6.0.

VMX_12 = Version(string='VMX_12')

Hardware version 12, first supported in Workstation 12.0.

VMX_13 = Version(string='VMX_13')

Hardware version 13, first supported in ESXi 6.5.

VMX_14 = Version(string='VMX_14')

Hardware version 14, first supported in ESXi 6.7. This class attribute was added in vSphere API 6.7.

VMX_15 = Version(string='VMX_15')

Hardware version 15, first supported in ESXi 6.7 Update 2. This class attribute was added in vSphere API 6.7.2.

VMX_16 = Version(string='VMX_16')

Hardware version 16, first supported in Workstation 15.0. This class attribute was added in vSphere API 7.0.0.0.

VMX_17 = Version(string='VMX_17')

Hardware version 17, first supported in ESXi 7.0.0-0. This class attribute was added in vSphere API 7.0.0.0.

VMX_18 = Version(string='VMX_18')

Hardware version 18, first supported in ESXi 7.0 U1. This class attribute was added in vSphere API 7.0.1.0.

VMX_19 = Version(string='VMX_19')

Hardware version 19, first supported in ESXi 7.0 U2. This class attribute was added in vSphere API 7.0.2.0.

VMX_20 = Version(string='VMX_20')

Hardware version 20, first supported in ESXi 8.0.0.1. This class attribute was added in vSphere API 8.0.0.1.

get(vm)

Returns the virtual hardware settings of a virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

Hardware.Info

Returns

Virtual hardware settings of the virtual machine.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

update(vm, spec)

Updates the virtual hardware settings of a virtual machine.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • spec (Hardware.UpdateSpec) – Specification for updating the virtual hardware settings of the virtual machine.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if the virtual machine is already configured for the desired hardware version.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the requested virtual hardware version is not newer than the current version.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the requested virtual hardware version is not supported by the server.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

upgrade(vm, version=None)

Upgrades the virtual machine to a newer virtual hardware version.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • version (Hardware.Version or None) – New virtual machine version. If None, defaults to the most recent virtual hardware version supported by the server.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is not powered off.

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if the virtual machine is already configured for the desired hardware version.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if version is older than the current virtual hardware version.

Raise

com.vmware.vapi.std.errors_client.Unsupported if version is not supported by the server.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

class com.vmware.vcenter.vm_client.Identity(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Identity class provides methods for managing the identity of a virtual machine. This class was added in vSphere API 6.7.1.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(name=None, bios_uuid=None, instance_uuid=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Identity.Info class contains information about the identity of a virtual machine. This class was added in vSphere API 6.7.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – Virtual machine name. This attribute was added in vSphere API 6.7.1.

  • bios_uuid (str) – 128-bit SMBIOS UUID of a virtual machine represented as a hexadecimal string in “12345678-abcd-1234-cdef-123456789abc” format. This attribute was added in vSphere API 6.7.1.

  • instance_uuid (str) – VirtualCenter-specific 128-bit UUID of a virtual machine, represented as a hexademical string. This identifier is used by VirtualCenter to uniquely identify all virtual machine instances, including those that may share the same SMBIOS UUID. This attribute was added in vSphere API 6.7.1.

class com.vmware.vcenter.vm_client.LibraryItem(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The LibraryItem class provides methods to identify virtual machines managed by Content Library. This class was added in vSphere API 6.9.1.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CheckOutInfo(library_item=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.CheckOutInfo class contains information about a virtual machine checked out of a content library item. This class was added in vSphere API 6.9.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

library_item (str) – Identifier of the library item that the virtual machine is checked out from. This attribute was added in vSphere API 6.9.1. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Item. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Item.

class Info(check_out=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItem.Info class contains information about the library item associated with a virtual machine. This class was added in vSphere API 6.9.1.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

check_out (LibraryItem.CheckOutInfo or None) – Information about the checked out virtual machine. This attribute was added in vSphere API 6.9.1. If None, the virtual machine is not checked out from a library item.

get(vm)

Returns the information about the library item associated with the virtual machine. This method was added in vSphere API 6.9.1.

Parameters

vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

LibraryItem.Info

Returns

Information about the library item associated with the virtual machine.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user that requested the method is not authorized to perform the method.

class com.vmware.vcenter.vm_client.Power(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Power class provides methods for managing the power state of a virtual machine.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(state=None, clean_power_off=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Power.Info class contains information about the power state of a virtual machine.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • state (Power.State) – Power state of the virtual machine.

  • clean_power_off (bool) – Flag indicating whether the virtual machine was powered off cleanly. This attribute may be used to detect that the virtual machine crashed unexpectedly and should be restarted. This attribute is optional and it is only relevant when the value of state is Power.State.POWERED_OFF.

class State(string)

Bases: vmware.vapi.bindings.enum.Enum

The Power.State class defines the valid power states for a virtual machine.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the State instance.

POWERED_OFF = State(string='POWERED_OFF')

The virtual machine is powered off.

POWERED_ON = State(string='POWERED_ON')

The virtual machine is powered on.

SUSPENDED = State(string='SUSPENDED')

The virtual machine is suspended.

get(vm)

Returns the power state information of a virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

Power.Info

Returns

Power state information for the specified virtual machine.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration or execution state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires System.Read.

reset(vm)

Resets a powered-on virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is powered off or suspended.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is performing another operation

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.Interact.Reset.

start(vm)

Powers on a powered-off or suspended virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if the virtual machine is already powered on.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the virtual machine does not support being powered on (e.g. marked as a template, serving as a fault-tolerance secondary virtual machine).

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if resources cannot be allocated for the virtual machine (e.g. physical resource allocation policy cannot be satisfied, insufficient licenses are available to run the virtual machine).

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if resources required by the virtual machine are not accessible (e.g. virtual machine configuration files or virtual disks are on inaccessible storage, no hosts are available to run the virtual machine).

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if resources required by the virtual machine are in use (e.g. virtual machine configuration files or virtual disks are locked, host containing the virtual machine is an HA failover host).

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is performing another operation.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.Interact.PowerOn.

stop(vm)

Powers off a powered-on or suspended virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if the virtual machine is already powered off.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is performing another operation.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.Interact.PowerOff.

suspend(vm)

Suspends a powered-on virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState if the virtual machine is already suspended.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is powered off.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is performing another operation.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • The resource VirtualMachine referenced by the parameter vm requires VirtualMachine.Interact.Suspend.

class com.vmware.vcenter.vm_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.vcenter.vm_client.Tools(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Tools class provides methods for managing VMware Tools in the guest operating system. This class was added in vSphere API 7.0.0.0.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Info(auto_update_supported=None, install_attempt_count=None, error=None, version_number=None, version=None, upgrade_policy=None, version_status=None, install_type=None, run_state=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Tools.Info class describes the VMWare Tools properties of a virtual machine. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • auto_update_supported (bool) – Set if the virtual machine supports auto-upgrading Tools via Tools.UpgradePolicy. This attribute was added in vSphere API 7.0.0.0.

  • install_attempt_count (long or None) – Number of attempts that have been made to install or upgrade the version of Tools installed on this virtual machine. This attribute was added in vSphere API 7.0.0.0. This attribute will be None if there have been no Tools install or upgrade attempt.

  • error (Exception or None) – Error that happened, if any, during last attempt to upgrade or install Tools. This attribute was added in vSphere API 7.0.0.0. This attribute will be None if a the last Tools install or upgrade attempt succeeded.

  • version_number (long or None) – Version of VMware Tools installed on the guest operating system. This attribute was added in vSphere API 7.0.0.0. This attribute wil be None if VMWare Tools is not installed. This is an integer constructed as follows: (((MJR) << 10) + ((MNR) << 5) + (REV)) Where MJR is tha major verson, MNR is the minor version and REV is the revision. Tools version = T Tools Version Major = MJR = (T / 1024) Tools Version Minor = MNR = ((T % 1024) / 32) Tools Version Revision = BASE = ((T % 1024) % 32) Tools actual version = MJR.MNR.REV

  • version (str or None) – Version of VMware Tools installed on the guest operating system. This is a human-readable value that should not be parsed. This attribute was added in vSphere API 7.0.0.0. This attribute wil be None if VMWare Tools is not installed.

  • upgrade_policy (Tools.UpgradePolicy) – Tools upgrade policy setting for the virtual machine. Tools.UpgradePolicy. This attribute was added in vSphere API 7.0.0.0.

  • version_status (Tools.VersionStatus or None) – Current version status of VMware Tools in the guest operating system, if known. This attribute was added in vSphere API 7.0.0.0. This attribute will be None if the version status is not known, for example if VMware Tools is too old to report the information.

  • install_type (Tools.ToolsInstallType or None) – Current installation type of VMware Tools in the guest operating system. This attribute was added in vSphere API 7.0.0.0. This attribute will be None if the installation type is not known, for example if VMware Tools is too old to report the information.

  • run_state (Tools.RunState) – Current run state of VMware Tools in the guest operating system. This attribute was added in vSphere API 7.0.0.0.

class RunState(string)

Bases: vmware.vapi.bindings.enum.Enum

Current run state of VMware Tools in the guest operating system. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the RunState instance.

EXECUTING_SCRIPTS = RunState(string='EXECUTING_SCRIPTS')

VMware Tools is running scripts as part of a state transition. This class attribute was added in vSphere API 7.0.0.0.

NOT_RUNNING = RunState(string='NOT_RUNNING')

VMware Tools is not running. This class attribute was added in vSphere API 7.0.0.0.

RUNNING = RunState(string='RUNNING')

VMware Tools is running. This class attribute was added in vSphere API 7.0.0.0.

class ToolsInstallType(string)

Bases: vmware.vapi.bindings.enum.Enum

The Tools.ToolsInstallType class defines the installation type of the Tools in the guest operating system. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the ToolsInstallType instance.

MSI = ToolsInstallType(string='MSI')

MSI is the installation type used for VMware Tools on Windows. This class attribute was added in vSphere API 7.0.0.0.

OPEN_VM_TOOLS = ToolsInstallType(string='OPEN_VM_TOOLS')

open-vm-tools are the open-source version of VMware Tools, may have been packaged by the OS vendor. This class attribute was added in vSphere API 7.0.0.0.

OSP = ToolsInstallType(string='OSP')

OSPs are RPM or Debian packages tailored for the OS in the VM. See http://packages.vmware.com. This class attribute was added in vSphere API 7.0.0.0.

TAR = ToolsInstallType(string='TAR')

Tools have been installed by the tar installer. This class attribute was added in vSphere API 7.0.0.0.

UNKNOWN = ToolsInstallType(string='UNKNOWN')

Installation type is not known. Most likely tools have been installed by OSPs or open-vm-tools, but a version that does not report its install type or an install type that we do not recognize. This class attribute was added in vSphere API 7.0.0.0.

class UpdateSpec(upgrade_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The (\@name UpdateSpec} class describes the VMware Tools properties of a virtual machine that can be updated. This class was added in vSphere API 7.0.0.0.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

upgrade_policy (Tools.UpgradePolicy or None) – Tools upgrade policy setting for the virtual machine. Tools.UpgradePolicy. This attribute was added in vSphere API 7.0.0.0. If None the upgrade policy will not be modified.

class UpgradePolicy(string)

Bases: vmware.vapi.bindings.enum.Enum

The Tools.UpgradePolicy class defines when Tools are auto-upgraded for a virtual machine. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the UpgradePolicy instance.

MANUAL = UpgradePolicy(string='MANUAL')

No auto-upgrades for Tools will be performed for this virtual machine. Users must manually invoke the Tools.upgrade() method to update Tools. This class attribute was added in vSphere API 7.0.0.0.

UPGRADE_AT_POWER_CYCLE = UpgradePolicy(string='UPGRADE_AT_POWER_CYCLE')

When the virtual machine is power-cycled, the system checks for a newer version of Tools when the virtual machine is powered on. If it is available, a Tools upgrade is automatically performed on the virtual machine and it is rebooted if necessary. This class attribute was added in vSphere API 7.0.0.0.

class VersionStatus(string)

Bases: vmware.vapi.bindings.enum.Enum

The Tools.VersionStatus class defines the version status types of VMware Tools installed in the guest operating system. This enumeration was added in vSphere API 7.0.0.0.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the VersionStatus instance.

BLACKLISTED = VersionStatus(string='BLACKLISTED')

VMware Tools is installed, but the installed version is known to have a grave bug and should be immediately upgraded. This class attribute was added in vSphere API 7.0.0.0.

CURRENT = VersionStatus(string='CURRENT')

VMware Tools is installed, and the version is current. This class attribute was added in vSphere API 7.0.0.0.

NOT_INSTALLED = VersionStatus(string='NOT_INSTALLED')

VMware Tools has never been installed. This class attribute was added in vSphere API 7.0.0.0.

SUPPORTED_NEW = VersionStatus(string='SUPPORTED_NEW')

VMware Tools is installed, supported, and newer than the version available on the host. This class attribute was added in vSphere API 7.0.0.0.

SUPPORTED_OLD = VersionStatus(string='SUPPORTED_OLD')

VMware Tools is installed, supported, but a newer version is available. This class attribute was added in vSphere API 7.0.0.0.

TOO_NEW = VersionStatus(string='TOO_NEW')

VMware Tools is installed, and the version is known to be too new to work correctly with this virtual machine. This class attribute was added in vSphere API 7.0.0.0.

TOO_OLD_UNSUPPORTED = VersionStatus(string='TOO_OLD_UNSUPPORTED')

VMware Tools is installed, but the version is too old. This class attribute was added in vSphere API 7.0.0.0.

UNMANAGED = VersionStatus(string='UNMANAGED')

VMware Tools is installed, but it is not managed by VMware. This includes open-vm-tools or OSPs which should be managed by the guest operating system. This class attribute was added in vSphere API 7.0.0.0.

get(vm)

Get the properties of VMware Tools. This method was added in vSphere API 7.0.0.0.

Parameters

vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

Tools.Info

Returns

VMware Tools properties.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

update(vm, spec)

Update the properties of VMware Tools. This method was added in vSphere API 7.0.0.0.

Parameters
  • vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

  • spec (Tools.UpdateSpec) – The new values.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the Tools.UpdateSpec.upgrade_policy attribute contains a value that is not supported by the server.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

upgrade(vm, command_line_options=None)

Begins the Tools upgrade process. To monitor the status of the Tools upgrade, clients should check the Tools status by calling Tools.get() and examining versionStatus and runState. This method was added in vSphere API 7.0.0.0.

Parameters
  • vm (str) – Identifier of the virtual machine. The parameter must be an identifier for the resource type: VirtualMachine.

  • command_line_options (str or None) – Command line options passed to the installer to modify the installation procedure for Tools. Set if any additional options are desired.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the VMware Tools are not running.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is not powered on.

Raise

com.vmware.vapi.std.errors_client.AlreadyInDesiredState is an upgrade is already in progress.

Raise

com.vmware.vapi.std.errors_client.Error if the upgrade process fails inside the guest operating system.

com.vmware.vcenter.vm_template_client module

The com.vmware.vcenter.vm_template_client module provides classes and classes that will let its client manage VMTX template in Content Library.

class com.vmware.vcenter.vm_template_client.LibraryItems(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The LibraryItems class provides methods to deploy virtual machines from library items containing virtual machine templates, as well as methods to create library items containing virtual machine templates. The LibraryItems class also provides an operation to retrieve information about the template contained in the library item. This class was added in vSphere API 6.8.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CpuInfo(count=None, cores_per_socket=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CpuInfo class contains CPU related information about the virtual machine template. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • count (long) – Number of CPU cores. This attribute was added in vSphere API 6.8.

  • cores_per_socket (long) – Number of CPU cores per socket. This attribute was added in vSphere API 6.8.

class CpuUpdateSpec(num_cpus=None, num_cores_per_socket=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CpuUpdateSpec class describes updates to the CPU configuration of the deployed virtual machine. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • num_cpus (long or None) – Number of virtual processors in the deployed virtual machine. This attribute was added in vSphere API 6.8. If {\@term.unset}, the deployed virtual machine has the same CPU count as the source virtual machine template contained in the library item.

  • num_cores_per_socket (long or None) – Number of cores among which to distribute CPUs in the deployed virtual machine. This attribute was added in vSphere API 6.8. If {\@term.unset}, the deployed virtual machine has the same number of cores per socket as the source virtual machine template contained in the library item.

class CreatePlacementSpec(folder=None, resource_pool=None, host=None, cluster=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CreatePlacementSpec class contains information used to place a virtual machine template onto resources within the vCenter inventory. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • folder (str or None) – Virtual machine folder into which the virtual machine template should be placed. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Folder. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Folder. If None, the virtual machine template will be placed in the same folder as the source virtual machine.

  • resource_pool (str or None) – Resource pool into which the virtual machine template should be placed. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ResourcePool. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ResourcePool. If None, the system will attempt to choose a suitable resource pool for the virtual machine template; if a resource pool cannot be chosen, the library item creation operation will fail.

  • host (str or None) – Host onto which the virtual machine template should be placed. If host and resourcePool are both specified, resourcePool must belong to host. If host and cluster are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem. This attribute may be None if resourcePool or cluster is specified. If None, the system will attempt to choose a suitable host for the virtual machine template; if a host cannot be chosen, the library item creation operation will fail.

  • cluster (str or None) – Cluster onto which the virtual machine template should be placed. If cluster and resourcePool are both specified, resourcePool must belong to cluster. If cluster and host are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource. If resourcePool or host is specified, it is recommended that this attribute be None.

class CreateSpec(source_vm=None, name=None, description=None, library=None, vm_home_storage=None, disk_storage=None, disk_storage_overrides=None, placement=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CreateSpec class defines the information required to create a library item containing a virtual machine template. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • source_vm (str) – Identifier of the source virtual machine to create the library item from. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: VirtualMachine. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: VirtualMachine.

  • name (str) – Name of the library item. This attribute was added in vSphere API 6.8.

  • description (str or None) – Description of the library item. This attribute was added in vSphere API 6.8. If None, the newly created library item has the same description as the source virtual machine.

  • library (str) – Identifier of the library in which the new library item should be created. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library.

  • vm_home_storage (LibraryItems.CreateSpecVmHomeStorage or None) – Storage location for the virtual machine template’s configuration and log files. This attribute was added in vSphere API 6.8. If None, the virtual machine template’s configuration and log files are placed on the default storage backing associated with the library specified by library.

  • disk_storage (LibraryItems.CreateSpecDiskStorage or None) –

    Storage specification for the virtual machine template’s disks. This attribute was added in vSphere API 6.8. If both diskStorageOverrides and diskStorage are None, the virtual machine template’s disks are placed in the default storage backing associated with the library specified by library.

    If diskStorageOverrides is None and diskStorage is specified, all of the virtual machine template’s disks are created with the storage spec specified by diskStorage.

    If diskStorageOverrides is specified and diskStorage is None, disks with identifiers that are not in diskStorageOverrides are placed in the default storage backing associated with the library specified by library.

    If both diskStorageOverrides and diskStorage are specified, disks with identifiers that are not in diskStorageOverrides are created with the storage spec specified by diskStorage.

  • disk_storage_overrides ((dict of str and LibraryItems.CreateSpecDiskStorage) or None) –

    Storage specification for individual disks in the virtual machine template. This is specified as a mapping between disk identifiers in the source virtual machine and their respective storage specifications. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the key in the attribute dict must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk. When methods return a value of this class as a return value, the key in the attribute dict will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk. If both diskStorageOverrides and diskStorage are None, the virtual machine template’s disks are placed in the default storage backing associated with the library specified by library.

    If diskStorageOverrides is None and diskStorage is specified, all of the virtual machine template’s disks are created with the storage spec specified by diskStorage.

    If diskStorageOverrides is specified and diskStorage is None, disks with identifiers that are not in diskStorageOverrides are placed in the default storage backing associated with the library specified by library.

    If both diskStorageOverrides and diskStorage are specified, disks with identifiers that are not in diskStorageOverrides are created with the storage spec specified by diskStorage.

  • placement (LibraryItems.CreatePlacementSpec or None) –

    Information used to place the virtual machine template. This attribute was added in vSphere API 6.8. This attribute is currently required. In the future, if this attribute is None, the system will place the virtual machine template on a suitable resource.

    If specified, each attribute will be used for placement. If the attributes result in disjoint placement, the operation will fail. If the attributes along with the placement values of the source virtual machine result in disjoint placement, the operation will fail.

class CreateSpecDiskStorage(datastore=None, storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CreateSpecDiskStorage class defines the storage specification for a virtual machine template’s disks. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • datastore (str or None) –

    Identifier for the datastore associated with a virtual machine template’s disk. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore. This attribute is currently required.

    If storagePolicy is also specified and is incompatible with the datastore, then the disk will be flagged as being out of compliance with the specified storage policy.

  • storage_policy (LibraryItems.CreateSpecDiskStoragePolicy or None) – Storage policy for a virtual machine template’s disk. This attribute was added in vSphere API 6.8. If None, datastore must be specified and the virtual machine template’s disk is created with the default storage policy associated with the datastore.

class CreateSpecDiskStoragePolicy(type=None, policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CreateSpecDiskStoragePolicy class defines the storage policy specification for a virtual machine template’s disks. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (LibraryItems.CreateSpecDiskStoragePolicy.Type) – Policy type to be used when creating a virtual machine template’s disk. This attribute was added in vSphere API 6.8.

  • policy (str) – Identifier for the storage policy to use. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.spbm.StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.spbm.StorageProfile. This attribute is optional and it is only relevant when the value of type is LibraryItems.CreateSpecDiskStoragePolicy.Type.USE_SPECIFIED_POLICY.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

Policy type for a virtual machine template’s disk. This enumeration was added in vSphere API 6.8.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

USE_SPECIFIED_POLICY = Type(string='USE_SPECIFIED_POLICY')

Use the specified policy. This class attribute was added in vSphere API 6.8.

class CreateSpecVmHomeStorage(datastore=None, storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CreateSpecVmHomeStorage class defines the storage specification for a virtual machine template’s configuration and log files. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • datastore (str or None) –

    Identifier of the datastore for the virtual machine template’s configuration and log files. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore. This attribute is currently required.

    When storagePolicy is also specified and is incompatible with the datastore, then the virtual machine template will be flagged as being out of compliance with the specified storage policy.

  • storage_policy (LibraryItems.CreateSpecVmHomeStoragePolicy or None) – Storage policy for the virtual machine template’s configuration and log files. This attribute was added in vSphere API 6.8. If None, datastore must be specified and the virtual machine template’s configuration and log files are created with the default storage policy associated with the datastore.

class CreateSpecVmHomeStoragePolicy(type=None, policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.CreateSpecVmHomeStoragePolicy class defines the storage policy specification for a virtual machine template’s configuration and log files. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (LibraryItems.CreateSpecVmHomeStoragePolicy.Type) – Policy type to be used when creating the virtual machine template’s configuration and log files. This attribute was added in vSphere API 6.8.

  • policy (str) – Identifier for the storage policy to use. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.spbm.StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.spbm.StorageProfile. This attribute is optional and it is only relevant when the value of type is LibraryItems.CreateSpecVmHomeStoragePolicy.Type.USE_SPECIFIED_POLICY.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

Policy type for the virtual machine template’s configuration and log files. This enumeration was added in vSphere API 6.8.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

USE_SPECIFIED_POLICY = Type(string='USE_SPECIFIED_POLICY')

Use the specified policy. This class attribute was added in vSphere API 6.8.

class DeployPlacementSpec(folder=None, resource_pool=None, host=None, cluster=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DeployPlacementSpec class contains information used to place a virtual machine onto resources within the vCenter inventory. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • folder (str or None) –

    Virtual machine folder into which the deployed virtual machine should be placed. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Folder. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Folder. This attribute is currently required.

    If None, the system will attempt to choose a suitable folder for the virtual machine; if a folder cannot be chosen, the virtual machine deployment operation will fail.

  • resource_pool (str or None) – Resource pool into which the deployed virtual machine should be placed. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ResourcePool. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ResourcePool. If None, the system will attempt to choose a suitable resource pool for the virtual machine; if a resource pool cannot be chosen, the virtual machine deployment operation will fail.

  • host (str or None) – Host onto which the virtual machine should be placed. If host and resourcePool are both specified, resourcePool must belong to host. If host and cluster are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem. This attribute may be None if resourcePool or cluster is specified. If None, the system will attempt to choose a suitable host for the virtual machine; if a host cannot be chosen, the virtual machine deployment operation will fail.

  • cluster (str or None) – Cluster onto which the deployed virtual machine should be placed. If cluster and resourcePool are both specified, resourcePool must belong to cluster. If cluster and host are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource. If resourcePool or host is specified, it is recommended that this attribute be None.

class DeploySpec(name=None, description=None, vm_home_storage=None, disk_storage=None, disk_storage_overrides=None, placement=None, powered_on=None, guest_customization=None, hardware_customization=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DeploySpec class defines the deployment parameters that can be specified for the deploy method. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • name (str) – Name of the deployed virtual machine. This attribute was added in vSphere API 6.8.

  • description (str or None) – Description of the deployed virtual machine. This attribute was added in vSphere API 6.8. If None, the deployed virtual machine has the same description as the source library item.

  • vm_home_storage (LibraryItems.DeploySpecVmHomeStorage or None) – Storage location for the deployed virtual machine’s configuration and log files. This attribute was added in vSphere API 6.8. If None, the deployed virtual machine’s configuration and log files are created with the same storage spec as the source virtual machine template’s configuration and log files.

  • disk_storage (LibraryItems.DeploySpecDiskStorage or None) –

    Storage specification for the deployed virtual machine’s disks. This attribute was added in vSphere API 6.8. If both diskStorageOverrides and diskStorage are None, the deployed virtual machine’s disks are created with the same storage spec as the corresponding disks in the source virtual machine template contained in the library item.

    If diskStorageOverrides is None and diskStorage is specified, all of the deployed virtual machine’s disks are created with the storage spec specified by diskStorage.

    If diskStorageOverrides is specified and diskStorage is None, disks with identifiers that are not in diskStorageOverrides are created with the same storage spec as the corresponding disks in the source virtual machine template contained in the library item.

    If both diskStorageOverrides and diskStorage are specified, disks with identifiers that are not in diskStorageOverrides are created with the storage spec specified by diskStorage.

  • disk_storage_overrides ((dict of str and LibraryItems.DeploySpecDiskStorage) or None) –

    Storage specification for individual disks in the deployed virtual machine. This is specified as a mapping between disk identifiers in the source virtual machine template contained in the library item and their storage specifications. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the key in the attribute dict must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk. When methods return a value of this class as a return value, the key in the attribute dict will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk. If both diskStorageOverrides and diskStorage are None, the deployed virtual machine’s disks are created with the same storage spec as the corresponding disks in the source virtual machine template contained in the library item.

    If diskStorageOverrides is None and diskStorage is specified, all of the deployed virtual machine’s disks are created with the storage spec specified by diskStorage.

    If diskStorageOverrides is specified and diskStorage is None, disks with identifiers that are not in diskStorageOverrides are created with the same storage spec as the corresponding disks in the source virtual machine template contained in the library item.

    If both diskStorageOverrides and diskStorage are specified, disks with identifiers that are not in diskStorageOverrides are created with the storage spec specified by diskStorage.

  • placement (LibraryItems.DeployPlacementSpec or None) –

    Information used to place the deployed virtual machine. This attribute was added in vSphere API 6.8. This attribute is currently required. In the future, if this attribute is None, the system will use the values from the source virtual machine template contained in the library item.

    If specified, each attribute will be used for placement. If the attributes result in disjoint placement, the operation will fail. If the attributes along with the placement values of the source virtual machine template result in disjoint placement, the operation will fail.

  • powered_on (bool or None) – Specifies whether the deployed virtual machine should be powered on after deployment. This attribute was added in vSphere API 6.8. If None, the virtual machine will not be powered on after deployment.

  • guest_customization (LibraryItems.GuestCustomizationSpec or None) – Guest customization spec to apply to the deployed virtual machine. This attribute was added in vSphere API 6.8. If None, the guest operating system is not customized after deployment.

  • hardware_customization (LibraryItems.HardwareCustomizationSpec or None) – Hardware customization spec which specifies updates to the deployed virtual machine. This attribute was added in vSphere API 6.8. If None, the deployed virtual machine has the same hardware configuration as the source virtual machine template contained in the library item.

class DeploySpecDiskStorage(datastore=None, storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DeploySpecDiskStorage class contains the storage specification for disks in the virtual machine. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • datastore (str or None) –

    Identifier for the datastore associated the deployed virtual machine’s disk. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore. This attribute is currently required.

    If storagePolicy is also specified and is incompatible with the datastore, then the disk will be flagged as being out of compliance with the specified storage policy.

  • storage_policy (LibraryItems.DeploySpecDiskStoragePolicy or None) – Storage policy for the deployed virtual machine’s disk. This attribute was added in vSphere API 6.8. If None, datastore must be specified and the deployed virtual machine’s disk is created with the default storage policy associated with the datastore.

class DeploySpecDiskStoragePolicy(type=None, policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DeploySpecDiskStoragePolicy class describes the storage policy specification for the deployed virtual machine’s disks. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (LibraryItems.DeploySpecDiskStoragePolicy.Type) – Policy type to be used when creating the deployed virtual machine’s disk. This attribute was added in vSphere API 6.8.

  • policy (str) – Identifier of the storage policy to use. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.spbm.StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.spbm.StorageProfile. This attribute is optional and it is only relevant when the value of type is LibraryItems.DeploySpecDiskStoragePolicy.Type.USE_SPECIFIED_POLICY.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

Policy type for the deployed virtual machine’s disk. This enumeration was added in vSphere API 6.8.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

USE_SOURCE_POLICY = Type(string='USE_SOURCE_POLICY')

Use the storage policy that is associated with the corresponding disk in the source virtual machine template. This class attribute was added in vSphere API 6.8.

USE_SPECIFIED_POLICY = Type(string='USE_SPECIFIED_POLICY')

Use the specified policy. This class attribute was added in vSphere API 6.8.

class DeploySpecVmHomeStorage(datastore=None, storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DeploySpecVmHomeStorage class defines the storage specification for a deployed virtual machine’s configuration and log files. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • datastore (str or None) –

    Identifier of the datastore for the deployed virtual machine’s configuration and log files. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore. This attribute is currently required.

    When storagePolicy is also specified and is incompatible with the datastore, then the deployed virtual machine will be flagged as being out of compliance with the specified storage policy.

  • storage_policy (LibraryItems.DeploySpecVmHomeStoragePolicy or None) – Storage policy for the deployed virtual machine’s configuration and log files. This attribute was added in vSphere API 6.8. If None, datastore must be specified and the deployed virtual machine’s configuration and log files are created with the default storage policy associated with the datastore.

class DeploySpecVmHomeStoragePolicy(type=None, policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DeploySpecVmHomeStoragePolicy class defines the storage policy specification for the deployed virtual machine’s configuration and log files. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (LibraryItems.DeploySpecVmHomeStoragePolicy.Type) – Policy type to be used when creating the deployed virtual machine’s configuration and log files. This attribute was added in vSphere API 6.8.

  • policy (str) – Identifier for the storage policy to use. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.spbm.StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.spbm.StorageProfile. This attribute is optional and it is only relevant when the value of type is LibraryItems.DeploySpecVmHomeStoragePolicy.Type.USE_SPECIFIED_POLICY.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

Policy type for the deployed virtual machine’s configuration and log files. This enumeration was added in vSphere API 6.8.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

USE_SOURCE_POLICY = Type(string='USE_SOURCE_POLICY')

Use the storage policy that is associated with the source virtual machine template’s configuration and log files. This class attribute was added in vSphere API 6.8.

USE_SPECIFIED_POLICY = Type(string='USE_SPECIFIED_POLICY')

Use the specified policy. This class attribute was added in vSphere API 6.8.

class DiskInfo(capacity=None, disk_storage=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DiskInfo class contains information about the virtual machine template’s virtual disk. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • capacity (long or None) – Capacity of the virtual disk in bytes. This attribute was added in vSphere API 6.8. This attribute will be None if the virtual disk is inaccessible.

  • disk_storage (LibraryItems.DiskStorageInfo) – Disk storage related information. This attribute was added in vSphere API 6.8.

class DiskStorageInfo(datastore=None, storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DiskStorageInfo class contains storage related information about a virtual machine template’s virtual disk. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • datastore (str) – Identifier of the datastore where the disk is stored. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore.

  • storage_policy (str or None) – Identifier of the storage policy associated with the virtual disk. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.spbm.StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.spbm.StorageProfile. If None, the virtual disk does not have a storage policy associated with it.

class DiskUpdateSpec(capacity=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.DiskUpdateSpec class describes updates to the configuration of a virtual disk in the deployed virtual machine. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

capacity (long) – Updated capacity of the virtual disk backing in bytes. This value has to be larger than the original capacity of the disk. This attribute was added in vSphere API 6.8.

class EthernetInfo(backing_type=None, mac_type=None, network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.EthernetInfo class contains information about a virtual machine template’s virtual Ethernet adapter. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • backing_type (LibraryItems.EthernetInfo.NetworkBackingType) – Network backing type for the virtual Ethernet adapter. This attribute was added in vSphere API 6.8.

  • mac_type (LibraryItems.EthernetInfo.MacAddressType) – MAC address type of the ethernet adapter. This attribute was added in vSphere API 6.8.

  • network (str or None) – Identifier of the network backing the virtual Ethernet adapter. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network. This attribute will be None if the identifier of the network backing could not be determined.

class MacAddressType(string)

Bases: vmware.vapi.bindings.enum.Enum

The LibraryItems.EthernetInfo.MacAddressType class defines the valid MAC address origins for a virtual Ethernet adapter. This enumeration was added in vSphere API 6.8.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the MacAddressType instance.

ASSIGNED = MacAddressType(string='ASSIGNED')

MAC address is assigned by vCenter Server. This class attribute was added in vSphere API 6.8.

GENERATED = MacAddressType(string='GENERATED')

MAC address is generated automatically. This class attribute was added in vSphere API 6.8.

MANUAL = MacAddressType(string='MANUAL')

MAC address is assigned statically. This class attribute was added in vSphere API 6.8.

class NetworkBackingType(string)

Bases: vmware.vapi.bindings.enum.Enum

The LibraryItems.EthernetInfo.NetworkBackingType class defines valid network backing types for a virtual Ethernet adapter. This enumeration was added in vSphere API 6.8.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the NetworkBackingType instance.

DISTRIBUTED_PORTGROUP = NetworkBackingType(string='DISTRIBUTED_PORTGROUP')

Distributed virtual switch backing. This class attribute was added in vSphere API 6.8.

HOST_DEVICE = NetworkBackingType(string='HOST_DEVICE')

Legacy host device network backing. Imported VMs may have virtual Ethernet adapters with this type of backing, but this type of backing cannot be used to create or to update a virtual Ethernet adapter. This class attribute was added in vSphere API 6.8.

OPAQUE_NETWORK = NetworkBackingType(string='OPAQUE_NETWORK')

Opaque network backing. This class attribute was added in vSphere API 6.8.

STANDARD_PORTGROUP = NetworkBackingType(string='STANDARD_PORTGROUP')

vSphere standard portgroup network backing. This class attribute was added in vSphere API 6.8.

class EthernetUpdateSpec(network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.EthernetUpdateSpec class describes the network that the ethernet adapter of the deployed virtual machine should be connected to. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

network (str or None) –

Identifier of the network backing the virtual Ethernet adapter. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network. This attribute is currently required.

If None, the virtual Ethernet adapter will be connected to same network as it was in the source virtual machine template.

class GuestCustomizationSpec(name=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.GuestCustomizationSpec class contains information required to customize the deployed virtual machine. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

name (str or None) – Name of the customization specification. This attribute was added in vSphere API 6.8. If None, no guest customization is performed.

class HardwareCustomizationSpec(nics=None, disks_to_remove=None, disks_to_update=None, cpu_update=None, memory_update=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.HardwareCustomizationSpec class defines the hardware customization options that are applied to the deployed virtual machine. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • nics ((dict of str and LibraryItems.EthernetUpdateSpec) or None) – Map of Ethernet network adapters to update. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the key in the attribute dict must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Ethernet. When methods return a value of this class as a return value, the key in the attribute dict will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Ethernet. If None, all Ethernet adapters will remain connected to the same network as they were in the source virtual machine template. An Ethernet adapter with a MacAddressType of MANUAL will not change. An Ethernet adapter with a MacAddressType of GENERATED or ASSIGNED will receive a new address.

  • disks_to_remove (set of str or None) – Idenfiers of disks to remove from the deployed virtual machine. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.vm.hardware.Disk. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.vm.hardware.Disk. If None, all disks will be copied.

  • disks_to_update ((dict of str and LibraryItems.DiskUpdateSpec) or None) – Disk update specification for individual disks in the deployed virtual machine. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the key in the attribute dict must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk. When methods return a value of this class as a return value, the key in the attribute dict will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk. If None, disks in the deployed virtual machine will have the same settings as the corresponding disks in the source virtual machine template contained in the library item.

  • cpu_update (LibraryItems.CpuUpdateSpec or None) – CPU update specification for the deployed virtual machine. This attribute was added in vSphere API 6.8. If {\@term.unset}, the deployed virtual machine has the same CPU settings as the source virtual machine template contained in the library item.

  • memory_update (LibraryItems.MemoryUpdateSpec or None) – Memory update specification for the deployed virtual machine. This attribute was added in vSphere API 6.8. If {\@term.unset}, the deployed virtual machine has the same memory settings as the source virtual machine template contained in the library item.

class Info(guest_os=None, cpu=None, memory=None, vm_home_storage=None, disks=None, nics=None, vm_template=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.Info class contains information about a virtual machine template item in content library. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • guest_os (com.vmware.vcenter.vm_client.GuestOS) – Configured guest operating system of the virtual machine template. This attribute was added in vSphere API 6.8.

  • cpu (LibraryItems.CpuInfo) – CPU configuration of the virtual machine template. This attribute was added in vSphere API 6.8.

  • memory (LibraryItems.MemoryInfo) – Memory configuration of the virtual machine template. This attribute was added in vSphere API 6.8.

  • vm_home_storage (LibraryItems.VmHomeStorageInfo) – Storage information about the virtual machine template’s configuration and log files. This attribute was added in vSphere API 6.8.

  • disks (dict of str and LibraryItems.DiskInfo) – Storage information about the virtual machine template’s virtual disks. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the key in the attribute dict must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk. When methods return a value of this class as a return value, the key in the attribute dict will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Disk.

  • nics (dict of str and LibraryItems.EthernetInfo) – Information about the virtual machine template’s virtual ethernet adapters. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the key in the attribute dict must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Ethernet. When methods return a value of this class as a return value, the key in the attribute dict will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Ethernet.

  • vm_template (str) – Identifier of the latest virtual machine template contained in the library item. This attribute is the managed object identifier used to identify the virtual machine template in the vSphere Management (SOAP) API. This attribute was added in vSphere API 6.8.

class MemoryInfo(size_mib=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.MemoryInfo class contains memory related information about the virtual machine template. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

size_mib (long) – Memory size in mebibytes. This attribute was added in vSphere API 6.8.

class MemoryUpdateSpec(memory=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.MemoryUpdateSpec class describes updates to the memory configuration of the deployed virtual machine. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

memory (long or None) – Size of a virtual machine’s memory in MB. This attribute was added in vSphere API 6.8. If {\@term.unset}, the deployed virtual machine has the same memory size as the source virtual machine template.

class VmHomeStorageInfo(datastore=None, storage_policy=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The LibraryItems.VmHomeStorageInfo class contains storage information about the virtual machine template’s configuration and log files. This class was added in vSphere API 6.8.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • datastore (str) – Identifier of the datastore where the virtual machine template’s configuration and log files are stored. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore.

  • storage_policy (str or None) – Identifier of the storage policy associated with the virtual machine template’s configuration and log files. This attribute was added in vSphere API 6.8. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.spbm.StorageProfile. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.spbm.StorageProfile. If None, the virtual machine template’s configuration and log files do not have a storage policy associated with them.

create(spec)

Creates a library item in content library from a virtual machine. This method creates a library item in content library whose content is a virtual machine template created from the source virtual machine, using the supplied create specification. The virtual machine template is stored in a newly created library item. This method was added in vSphere API 6.8.

Parameters

spec (LibraryItems.CreateSpec) – information used to create the library item from the source virtual machine.

Return type

str

Returns

Identifier of the newly created library item. The return value will be an identifier for the resource type: com.vmware.content.library.Item.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if an entity with the name specified by LibraryItems.CreateSpec.name already exists in the folder specified by LibraryItems.CreatePlacementSpec.folder.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if LibraryItems.CreateSpec contains invalid arguments.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the operation cannot be performed because of the source virtual machine’s current state.

Raise

com.vmware.vapi.std.errors_client.NotFound if the source virtual machine specified by LibraryItems.CreateSpec.source_vm does not exist.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library specified by LibraryItems.CreateSpec.library does not exist.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if there was an error accessing a file from the source virtual machine.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if the source virtual machine is busy.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if any of the services involved in the method are unavailable.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if any of the resources needed to create the virtual machine template could not be allocated.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource com.vmware.content.Library referenced by the attribute LibraryItems.CreateSpec.library requires ContentLibrary.AddLibraryItem.

  • The resource VirtualMachine referenced by the attribute LibraryItems.CreateSpec.source_vm requires System.Read.

  • The resource Datastore referenced by the attribute LibraryItems.CreateSpecVmHomeStorage.datastore requires System.Read.

  • The resource com.vmware.spbm.StorageProfile referenced by the attribute LibraryItems.CreateSpecVmHomeStoragePolicy.policy requires System.Read.

  • The resource Datastore referenced by the attribute LibraryItems.CreateSpecDiskStorage.datastore requires System.Read.

  • The resource com.vmware.spbm.StorageProfile referenced by the attribute LibraryItems.CreateSpecDiskStoragePolicy.policy requires System.Read.

  • The resource com.vmware.vcenter.vm.hardware.Disk referenced by the dict key of attribute LibraryItems.CreateSpec.disk_storage_overrides requires System.Read.

  • The resource Folder referenced by the attribute LibraryItems.CreatePlacementSpec.folder requires System.Read.

  • The resource ResourcePool referenced by the attribute LibraryItems.CreatePlacementSpec.resource_pool requires System.Read.

  • The resource HostSystem referenced by the attribute LibraryItems.CreatePlacementSpec.host requires System.Read.

  • The resource ClusterComputeResource referenced by the attribute LibraryItems.CreatePlacementSpec.cluster requires System.Read.

deploy(template_library_item, spec)

Deploys a virtual machine as a copy of the source virtual machine template contained in the library item specified by template_library_item. It uses the deployment specification in spec. If LibraryItems.DeploySpec.powered_on and/or LibraryItems.DeploySpec.guest_customization are specified, the server triggers the power on and/or guest customization operations, which are executed asynchronously. This method was added in vSphere API 6.8.

Parameters
  • template_library_item (str) – identifier of the content library item containing the source virtual machine template to be deployed. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

  • spec (LibraryItems.DeploySpec) – specification of how the virtual machine should be deployed.

Return type

str

Returns

Identifier of the deployed virtual machine. The return value will be an identifier for the resource type: VirtualMachine.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if a virtual machine with the name specified by LibraryItems.DeploySpec.name already exists.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if spec contains invalid arguments.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if either a specified host or a specified datastore is in an invalid state for the deployment, such as maintenance mode.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item specified by template_library_item cannot be found.

Raise

com.vmware.vapi.std.errors_client.NotFound if any resource specified by a attribute of the LibraryItems.DeploySpec class, specified by spec cannot be found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if there was an error accessing the source virtual machine template contained in the library item specified by template_library_item.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if there an error accessing any of the resources specified in the spec.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if any of the services involved in the method are unavailable.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if there was an error in allocating any of the resources required by the method.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource com.vmware.content.library.Item referenced by the parameter template_library_item requires VirtualMachine.Provisioning.DeployTemplate.

  • The resource Datastore referenced by the attribute LibraryItems.DeploySpecVmHomeStorage.datastore requires System.Read.

  • The resource com.vmware.spbm.StorageProfile referenced by the attribute LibraryItems.DeploySpecVmHomeStoragePolicy.policy requires System.Read.

  • The resource Datastore referenced by the attribute LibraryItems.DeploySpecDiskStorage.datastore requires System.Read.

  • The resource com.vmware.spbm.StorageProfile referenced by the attribute LibraryItems.DeploySpecDiskStoragePolicy.policy requires System.Read.

  • The resource com.vmware.vcenter.vm.hardware.Disk referenced by the dict key of attribute LibraryItems.DeploySpec.disk_storage_overrides requires System.Read.

  • The resource Folder referenced by the attribute LibraryItems.DeployPlacementSpec.folder requires System.Read.

  • The resource ResourcePool referenced by the attribute LibraryItems.DeployPlacementSpec.resource_pool requires System.Read.

  • The resource HostSystem referenced by the attribute LibraryItems.DeployPlacementSpec.host requires System.Read.

  • The resource ClusterComputeResource referenced by the attribute LibraryItems.DeployPlacementSpec.cluster requires System.Read.

  • The resource com.vmware.vcenter.vm.hardware.Ethernet referenced by the dict key of attribute LibraryItems.HardwareCustomizationSpec.nics requires System.Read.

  • The resource Network referenced by the attribute LibraryItems.EthernetUpdateSpec.network requires System.Read.

  • The resource com.vmware.vcenter.vm.hardware.Disk referenced by the attribute LibraryItems.HardwareCustomizationSpec.disks_to_remove requires System.Read.

  • The resource com.vmware.vcenter.vm.hardware.Disk referenced by the dict key of attribute LibraryItems.HardwareCustomizationSpec.disks_to_update requires System.Read.

get(template_library_item)

Returns information about a virtual machine template contained in the library item specified by template_library_item. This method was added in vSphere API 6.8.

Parameters

template_library_item (str) – identifier of the library item containing the virtual machine template. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

Return type

LibraryItems.Info or None

Returns

Information about the virtual machine template item contained in the library item. If None, the library item specified by template_library_item does not contain a virtual machine template.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item could not be found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine template’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if any of the services involved in the method are unavailable.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

  • Method execution requires System.Read.

  • The resource com.vmware.content.library.Item referenced by the parameter template_library_item requires System.Read.

class com.vmware.vcenter.vm_template_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance