com.vmware.content package

Subpackages

• com.vmware.content.library package
  • Subpackages
    • com.vmware.content.library.item package
      • Submodules
      • com.vmware.content.library.item.downloadsession_client module
      • com.vmware.content.library.item.updatesession_client module
  • Submodules
  • com.vmware.content.library.item_client module
• com.vmware.content.type package
  • Subpackages
    • com.vmware.content.type.ovf package
      • Submodules
      • com.vmware.content.type.ovf.policy_client module
  • Submodules
  • com.vmware.content.type.ovf_client module

Submodules

com.vmware.content.library_client module

The Content Library module provides classes and classes for defining and managing the library’s items, subscription, publication, and storage.

class com.vmware.content.library_client.Item(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Item class provides methods for managing library items.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class DestinationSpec(subscription=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Item.DestinationSpec class contains information required to publish the library item to a specific subscription. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

subscription (str) – Identifier of the subscription associated with the subscribed library. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Subscriptions. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Subscriptions.

class FindSpec(name=None, library_id=None, source_id=None, type=None, cached=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Item.FindSpec class specifies the properties that can be used as a filter to find library items. When multiple attributes are specified, all properties of the item must match the specification.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• name (str or None) – The name of the library item. The name is case-insensitive. See ItemModel.name. If not specified all library item names are searched.

• library_id (str or None) – The identifier of the library containing the item. See ItemModel.library_id. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. If not specified all libraries are searched.

• source_id (str or None) – The identifier of the library item as reported by the publisher. See ItemModel.source_id. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Item. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Item. If not specified all library items are searched.

• type (str or None) – The type of the library item. The type is case-insensitive. See ItemModel.type. If not specified all types are searched.

• cached (bool or None) – Whether the item is cached. Possible values are ‘true’ or ‘false’. See ItemModel.cached. If not specified all library items are searched.

RESOURCE_TYPE = 'com.vmware.content.library.Item'

Resource type for item.

copy(source_library_item_id, destination_create_spec, client_token=None)

Copies a library item.

Copying a library item allows a duplicate to be made within the same or different library. The copy occurs by first creating a new library item, whose identifier is returned. The content of the library item is then copied asynchronously. This copy can be tracked as a task.

If the copy fails, Content Library Service will roll back the copy by deleting any content that was already copied, and removing the new library item. A failure during rollback may require manual cleanup by an administrator.

A library item cannot be copied into a subscribed library.

Parameters

• client_token (str or None) – A unique token generated on the client for each copy request. The token should be a universally unique identifier (UUID), for example: b8a2a2e3-2314-43cd-a871-6ede0f429751. This token can be used to guarantee idempotent copy. If not specified copy is not idempotent.

• source_library_item_id (str) – Identifier of the existing library item from which the content will be copied. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

• destination_create_spec (ItemModel) – Specification for the new library item to be created.

Return type

str

Returns

The identifier of the new library item into which the content is being copied. The return value will be an identifier for the resource type: com.vmware.content.library.Item.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item with source_library_item_id does not exist, or if the library referenced by the ItemModel.library_id property of destination_create_spec does not exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument

if one of the following is true for the new library item:

• name is empty

• name exceeds 80 characters

• description exceeds 2000 characters

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the client_token does not conform to the UUID format.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType if the ItemModel.library_id property of destination_create_spec refers to a subscribed library.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the copy operation failed because the source or destination library item is not accessible.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the content of the source library item specified by source_library_item_id, or the content of the target library specified by the library ID (see ItemModel.library_id) property of destination_create_spec has been deleted from the storage backings (see LibraryModel#storageBackings) associated with it.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.library.Item referenced by the parameter source_library_item_id requires System.Read.

• The resource com.vmware.content.Library referenced by the attribute ItemModel.library_id requires ContentLibrary.AddLibraryItem.

create(create_spec, client_token=None)

Creates a new library item.

A new library item is created without any content. After creation, content can be added through the com.vmware.content.library.item_client.UpdateSession and com.vmware.content.library.item.updatesession_client.File classes.

A library item cannot be created in a subscribed library.

Parameters

• client_token (str or None) – A unique token generated on the client for each creation request. The token should be a universally unique identifier (UUID), for example: b8a2a2e3-2314-43cd-a871-6ede0f429751. This token can be used to guarantee idempotent creation. If not specified creation is not idempotent.

• create_spec (ItemModel) – Specification that defines the properties of the new library item.

Return type

str

Returns

Identifier of the new library item. The return value will be an identifier for the resource type: com.vmware.content.library.Item.

Raise

com.vmware.vapi.std.errors_client.NotFound if the ItemModel.library_id property of create_spec refers to a library that does not exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument

if one of the following is true for the new library item:

• name is empty

• name exceeds 80 characters

• description exceeds 2000 characters

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the client_token does not conform to the UUID format.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType if the ItemModel.library_id property of create_spec refers to a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the content of the library specified by the library ID (see ItemModel.library_id) property of create_spec has been deleted from the storage backings (see LibraryModel#storageBackings) associated with it.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if there is already a library item with same name in the library.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.Library referenced by the attribute ItemModel.library_id requires ContentLibrary.AddLibraryItem.

delete(library_item_id)

Deletes a library item.

This method will immediately remove the item from the library that owns it. The content of the item will be asynchronously removed from the storage backings. The content deletion can be tracked with a task. In the event that the task fails, an administrator may need to manually remove the files from the storage backing.

This method cannot be used to delete a library item that is a member of a subscribed library. Removing an item from a subscribed library requires deleting the item from the original published local library and syncing the subscribed library.

Parameters

library_item_id (str) – Identifier of the library item to delete. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType if the library item with the given library_item_id is a member of a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item with the specified library_item_id does not exist.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the library item contains a virtual machine template and a virtual machine is checked out of the library item.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.library.Item referenced by the parameter library_item_id requires ContentLibrary.DeleteLibraryItem.

find(spec)

Returns identifiers of all the visible (as determined by authorization policy) library items matching the requested Item.FindSpec.

Parameters

spec (Item.FindSpec) – Specification describing what properties to filter on.

Return type

list of str

Returns

The list of identifiers of all the visible library items matching the given spec. The return value will contain identifiers for the resource type: com.vmware.content.library.Item.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if no properties are specified in the spec.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• Method execution requires System.Read.

• The resource com.vmware.content.Library referenced by the attribute Item.FindSpec.library_id requires System.Read.

get(library_item_id)

Returns the ItemModel with the given identifier.

Parameters

library_item_id (str) – Identifier of the library item to return. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

Return type

ItemModel

Returns

The ItemModel instance with the given library_item_id.

Raise

com.vmware.vapi.std.errors_client.NotFound if no item with the given library_item_id exists.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.library.Item referenced by the parameter library_item_id requires System.Read.

list(library_id)

Returns the identifiers of all items in the given library.

Parameters

library_id (str) – Identifier of the library whose items should be returned. The parameter must be an identifier for the resource type: com.vmware.content.Library.

Return type

list of str

Returns

The list of identifiers of the items in the library specified by library_id. The return value will contain identifiers for the resource type: com.vmware.content.library.Item.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library associated with library_id does not exist.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.Library referenced by the parameter library_id requires System.Read.

publish(library_item_id, force_sync_content, subscriptions=None)

Publishes the library item to specified subscriptions of the library. If no subscriptions are specified, then publishes the library item to all subscriptions of the library. This method was added in vSphere API 6.7.2.

Parameters

• library_item_id (str) – Library item identifier. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

• force_sync_content (bool) – Whether to synchronize file content as well as metadata. This parameter applies only if the subscription is on-demand.

• subscriptions (list of Item.DestinationSpec or None) – The list of subscriptions to publish this library item to.

Raise

com.vmware.vapi.std.errors_client.Error If the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound If the library item specified by library_item_id does not exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If one or more arguments in subscriptions is not valid.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType If the library item specified by library_item_id is a member of a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState If the library item specified by library_item_id does not belong to a published library.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated If the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.library.Item referenced by the parameter library_item_id requires ContentLibrary.PublishLibraryItem.

update(library_item_id, update_spec)

Updates the specified properties of a library item.

This is an incremental update to the library item. Attributes that are None in the update specification are left unchanged.

This method cannot update a library item that is a member of a subscribed library. Those items must be updated in the source published library and synchronized to the subscribed library.

Parameters

• library_item_id (str) – Identifier of the library item to update. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

• update_spec (ItemModel) – Specification of the properties to set.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item specified by library_item_id does not exist.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType if the library item corresponding to library_item_id is a member of a subscribed library.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument

if one of the following is true for the update_spec:

• name is empty

• name exceeds 80 characters

• description exceeds 2000 characters

• version is not equal to the current version of the library item

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the library item belongs to a published library with JSON persistence enabled (see PublishInfo.persist_json_enabled) and the content of the library item specified by library_item_id has been deleted from the storage backings (see LibraryModel#storageBackings) associated with it.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if there is already a library item with same name in the library.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.library.Item referenced by the parameter library_item_id requires ContentLibrary.UpdateLibraryItem.

class com.vmware.content.library_client.ItemModel(id=None, library_id=None, content_version=None, creation_time=None, description=None, last_modified_time=None, last_sync_time=None, metadata_version=None, name=None, cached=None, size=None, type=None, version=None, source_id=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The ItemModel class represents a library item that has been stored in a library.

A ItemModel represents a single logical unit to be managed within a com.vmware.content_client.LibraryModel. Items contain the actual content of a library, and their placement within a library determines policies that affect that content such as publishing.

A library item can have a specified type, indicated with the ItemModel.type attribute. This property is associated with a Content Library Service plugin that supports specific types and provides additional services. The types available in a specific Content Library Service can be queried using the com.vmware.content_client.Type class. Items of an unknown or unspecified type are treated generically. Because subscribed library catalogs are synchronized as is, subscribing to a remote Content Library Service effectively gives you a library with the functionality of the remote service’s type adapter plugins, even if they are not installed locally.

Items can be managed using the Item class and, for items in subscribed libraries, the SubscribedItem class.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• id (str) – A unique identifier for this library item. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Item. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Item. This attribute is not used for the create method. It will not be present in the return value of the get or list methods. It is not used for the update method.

• library_id (str) – The identifier of the com.vmware.content_client.LibraryModel to which this item belongs. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• content_version (str) – The latest version of the file content list of this library item. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.item.Version. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.item.Version. This attribute is not used for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• creation_time (datetime.datetime) – The date and time when this library item was created. This attribute is not used for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• description (str) – A human-readable description for this library item. This attribute is optional for the create method. Leaving it None during creation will result in an empty string value. It will always be present in the result of a get or list method. It is optional for the update method. Leaving it None during update indicates that the description remains unchanged.

• last_modified_time (datetime.datetime) –

  The date and time when the metadata for this library item was last changed.

  This attribute is affected by changes to the properties or file content of this item. It is not modified by changes to the tags of the item, or by changes to the library which owns this item. This attribute is not used for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• last_sync_time (datetime.datetime) –

  The date and time when this library item was last synchronized.

  This attribute is updated every time a synchronization is triggered on the library item, including when a synchronization is triggered on the library to which this item belongs. The value is None for a library item that belongs to a local library. This attribute is not used for the create method. It is optional in the return value of the get or list methods. It is not used for the update method.

• metadata_version (str) –

  A version number for the metadata of this library item.

  This value is incremented with each change to the metadata of this item. Changes to name, description, and so on will increment this value. The value is not incremented by changes to the content or tags of the item or the library which owns it. This attribute is not used for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• name (str) –

  A human-readable name for this library item.

  The name may not be None or an empty string. The name does not have to be unique, even within the same library. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

• cached (bool) – The status that indicates whether the library item is on disk or not. The library item is cached when all its files are on disk. This attribute is not used for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• size (long) – The library item size, in bytes. The size is the sum of the size used on the storage backing for all the files in the item. When the library item is not cached, the size is 0. This attribute is not used for the create method. It is optional in the return value of the get or list methods. It is not used for the update method.

• type (str) –

  An optional type identifier which indicates the type adapter plugin to use.

  This attribute may be set to a non-empty string value that corresponds to an identifier supported by a type adapter plugin present in the Content Library Service. A type adapter plugin, if present for the specified type, can provide additional information and services around the item content. A type adapter can guide the upload process by creating file entries that are in need of being uploaded to complete an item.

  The types and plugins supported by the Content Library Service can be queried using the com.vmware.content_client.Type class. This attribute is optional for the create and update methods. During creation, if the type is left unspecified, or if the type is specified but does not have a corresponding type support plugin, then the type of the library item is considered to be generic and all data is treated as generic files. During update, if the type is not specified, then it is not updated.

• version (str) –

  A version number that is updated on metadata changes. This value is used to validate update requests to provide optimistic concurrency of changes.

  This value represents a number that is incremented every time library item properties, such as name or description, are changed. It is not incremented by changes to the file content of the library item, including adding or removing files. It is also not affected by tagging the library item. This attribute is not used for the create method. It will always be present in the result of a get or list method. It is optional for the update method. Leaving it None during update indicates that you do not need to detect concurrent updates.

• source_id (str) – The identifier of the ItemModel to which this item is synchronized to if the item belongs to a subscribed library. The value is None for a library item that belongs to a local library. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Item. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Item. This attribute is not used for the create method. It is optional in the return value of the get or list methods. It is not used for the update method.

class com.vmware.content.library_client.OptimizationInfo(optimize_remote_publishing=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The OptimizationInfo class defines different optimizations and optimization parameters applied to particular library.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

optimize_remote_publishing (bool) –

If set to true then library would be optimized for remote publishing.

Turn it on if remote publishing is dominant use case for this library. Remote publishing means here that publisher and subscribers are not the part of the same Vcenter SSO domain.

Any optimizations could be done as result of turning on this optimization during library creation. For example, library content could be stored in different format but optimizations are not limited to just storage format.

Note, that value of this toggle could be set only during creation of the library and you would need to migrate your library in case you need to change this value (optimize the library for different use case). This attribute is optional for the create method. If not specified for the create, the default is for the library to not be optmized for specific use case. It is not used for the update method.

class com.vmware.content.library_client.PublishInfo(authentication_method=None, published=None, publish_url=None, user_name=None, password=None, current_password=None, persist_json_enabled=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The PublishInfo class defines how a local library is published publicly for synchronization to other libraries.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• authentication_method (PublishInfo.AuthenticationMethod) – Indicates how a subscribed library should authenticate (BASIC, NONE) to the published library endpoint. This attribute is required for the com.vmware.content_client.LocalLibrary.create() method. It is optional for the com.vmware.content_client.LocalLibrary.update() operation, and if None the value will not be changed. When the existing authentication method is PublishInfo.AuthenticationMethod.BASIC and authentication is being turned off by updating this attribute to PublishInfo.AuthenticationMethod.NONE, then the PublishInfo.current_password attribute is required. This attribute will always be present in the results of the com.vmware.content_client.LocalLibrary.get() method.

• published (bool) – Whether the local library is published. This attribute is required for the com.vmware.content_client.LocalLibrary.create() method. It is optional for the com.vmware.content_client.LocalLibrary.update() operation, and if None the value will not be changed. When the existing authentication method is PublishInfo.AuthenticationMethod.BASIC and the local library is published, the PublishInfo.current_password attribute is required before turning off publishing. This attribute will always be present in the results of the com.vmware.content_client.LocalLibrary.get() method.

• publish_url (str) –

  The URL to which the library metadata is published by the Content Library Service.

  This value can be used to set the SubscriptionInfo.subscription_url property when creating a subscribed library. This attribute is not used for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• user_name (str) – The username to require for authentication. This attribute is optional for the com.vmware.content_client.LocalLibrary.create() and com.vmware.content_client.LocalLibrary.update() methods. When the authentication method is PublishInfo.AuthenticationMethod.NONE, the username can be left None. When the authentication method is PublishInfo.AuthenticationMethod.BASIC, the username is ignored in the current release. It defaults to “vcsp”. It is preferable to leave this None. If specified, it must be set to “vcsp”.

• password (str) – The new password to require for authentication. This attribute is optional for the com.vmware.content_client.LocalLibrary.create() method. When the authentication method is PublishInfo.AuthenticationMethod.NONE, the password can be left None. When the authentication method is PublishInfo.AuthenticationMethod.BASIC, the password should be a non-empty string. This attribute is optional for the com.vmware.content_client.LocalLibrary.update() method. Leaving it None during update indicates that the password is not changed. When the password is changed, the PublishInfo.current_password attribute is required. This attribute is not used for the com.vmware.content_client.LocalLibrary.get() method.

• current_password (str) – The current password to verify. This attribute is available starting in vSphere 6.7. This attribute is unused for the com.vmware.content_client.LocalLibrary.create() method. This attribute is optional for the com.vmware.content_client.LocalLibrary.update() method. When the existing authentication method is PublishInfo.AuthenticationMethod.NONE, the current password can be left None. When the existing authentication method is PublishInfo.AuthenticationMethod.BASIC, the current password is verified before applying the new PublishInfo.password, turning off authentication, or unpublishing the library. This attribute is not used for the com.vmware.content_client.LocalLibrary.get() method.

• persist_json_enabled (bool) –

  Whether library and library item metadata are persisted in the storage backing as JSON files. This flag only applies if the local library is published.

  Enabling JSON persistence allows you to synchronize a subscribed library manually instead of over HTTP. You copy the local library content and metadata to another storage backing manually and then create a subscribed library referencing the location of the library JSON file in the SubscriptionInfo.subscription_url. When the subscribed library’s storage backing matches the subscription URL, files do not need to be copied to the subscribed library.

  For a library backed by a datastore, the library JSON file will be stored at the path contentlib-{library_id}/lib.json on the datastore.

  For a library backed by a remote file system, the library JSON file will be stored at {library_id}/lib.json in the remote file system path. This attribute is optional for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

class AuthenticationMethod(string)

Bases: vmware.vapi.bindings.enum.Enum

The PublishInfo.AuthenticationMethod class indicates how a subscribed library should authenticate to the published library endpoint.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the AuthenticationMethod instance.

BASIC = AuthenticationMethod(string='BASIC')

Require HTTP Basic authentication matching a specified username and password.

NONE = AuthenticationMethod(string='NONE')

Require no authentication.

class com.vmware.content.library_client.SourceInfo(source_library=None, subscription=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SourceInfo class contains information about the source published library of a subscribed library. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• source_library (str) – Identifier of the published library. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

• subscription (str) – Identifier of the subscription associated with the subscribed library. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Subscriptions. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Subscriptions. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

class com.vmware.content.library_client.StorageBacking(type=None, datastore_id=None, storage_uri=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The StorageBacking class defines a storage location where content in a library will be stored. The storage location can either be a Datastore or Other type.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• type (StorageBacking.Type) – Type (DATASTORE, OTHER) of StorageBacking. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is not used for the update method.

• datastore_id (str) – Identifier of the datastore used to store the content in the library. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Datastore. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Datastore. This attribute is optional and it is only relevant when the value of type is StorageBacking.Type.DATASTORE.

• storage_uri (str) –

  URI identifying the location used to store the content in the library.

  The following URI formats are supported:

  vSphere 6.5

  • nfs://server/path?version=4 (for vCenter Server Appliance only) - Specifies an NFS Version 4 server.

  • nfs://server/path (for vCenter Server Appliance only) - Specifies an NFS Version 3 server. The nfs://server:/path format is also supported.

  • smb://server/path - Specifies an SMB server or Windows share.

  vSphere 6.0 Update 1

  • nfs://server:/path (for vCenter Server Appliance only)

  • file://unc-server/path (for vCenter Server for Windows only)

  • file:///mount/point (for vCenter Server Appliance only) - Local file URIs are supported only when the path is a local mount point for an NFS file system. Use of file URIs is strongly discouraged. Instead, use an NFS URI to specify the remote file system.

  vSphere 6.0

  • nfs://server:/path (for vCenter Server Appliance only)

  • file://unc-server/path (for vCenter Server for Windows only)

  • file:///path - Local file URIs are supported but strongly discouraged because it may interfere with the performance of vCenter Server.

  This attribute is optional and it is only relevant when the value of type is StorageBacking.Type.OTHER.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The StorageBacking.Type class specifies the type of the StorageBacking.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

DATASTORE = Type(string='DATASTORE')

The content of the library will be stored on a datastore.

These are vCenter Server managed datastores, and are logical containers that hide specifics of each storage device. Depending on the type of storage you use, datastores can be backed by the following file system formats:

• Virtual Machine File System (VMFS)

• Network File System (NFS)

OTHER = Type(string='OTHER')

The content of the library will be stored on a remote file system.

Supports the following remote file systems:

• NFS (on vCenter Server Appliance)

• SMB (on vCenter Server Appliance and vCenter Server for Windows)

class com.vmware.content.library_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.content.library_client.SubscribedItem(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The SubscribedItem class manages the unique features of library items that are members of a subscribed library.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

evict(library_item_id)

Evicts the cached content of a library item in a subscribed library.

This method allows the cached content of a library item to be removed to free up storage capacity. This method will only work when a library item is synchronized on-demand. When a library is not synchronized on-demand, it always attempts to keep its cache up-to-date with the published source. Evicting the library item will set ItemModel.cached to false.

Parameters

library_item_id (str) – Identifier of the library item whose content should be evicted. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item specified by library_item_id does not exist.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType if the library item specified by library_item_id is not a member of a subscribed library.

Raise

com.vmware.vapi.std.errors_client.InvalidElementConfiguration if the library item specified by library_item_id is a member of a subscribed library that does not synchronize on-demand.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the content of the library item specified by library_item_id has been deleted from the storage backings (see LibraryModel#storageBackings) associated with it.

For instance, this {\@term error) is reported on evicting a library item in an on-demand subscribed library that was restored from backup, and the library item was deleted after backup, thus resulting in its content being deleted from the associated storage backings. In this scenario, the metadata of the library item is present on a restore, while its content has been deleted.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.library.Item referenced by the parameter library_item_id requires ContentLibrary.EvictLibraryItem.

sync(library_item_id, force_sync_content)

Forces the synchronization of an individual library item in a subscribed library.

Synchronizing an individual item will update that item’s metadata from the remote source. If the source library item on the remote library has been deleted, this method will delete the library item from the subscribed library as well.

The default behavior of the synchronization is determined by the SubscriptionInfo of the library which owns the library item.

• If SubscriptionInfo.on_demand is true, then the file content is not synchronized by default. In this case, only the library item metadata is synchronized. The file content may still be forcefully synchronized by passing true for the force_sync_content parameter.

• If SubscriptionInfo.on_demand is false, then this call will always synchronize the file content. The force_sync_content parameter is ignored when the subscription is not on-demand.

When the file content has been synchronized, the ItemModel.cached attribute will be true.

This method will return immediately and create an asynchronous task to perform the synchronization.

Parameters

• library_item_id (str) – Identifier of the library item to synchronize. The parameter must be an identifier for the resource type: com.vmware.content.library.Item.

• force_sync_content (bool) – Whether to synchronize file content as well as metadata. This parameter applies only if the subscription is on-demand.

Raise

com.vmware.vapi.std.errors_client.NotFound if the library item specified by library_item_id could not be found.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType if the library item specified by library_item_id is not a member of a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the content of the library item specified by library_item_id has been deleted from the storage backings (see LibraryModel#storageBackings) associated with it.

For instance, this {\@term error) is reported on synchronizing a library item in a subscribed library that was restored from backup, and the library item was deleted after backup, thus resulting in its content being deleted from the associated storage backings. In this scenario, the metadata of the library item is present on a restore, while its content has been deleted.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.library.Item referenced by the parameter library_item_id requires ContentLibrary.SyncLibraryItem.

class com.vmware.content.library_client.SubscriptionInfo(authentication_method=None, automatic_sync_enabled=None, on_demand=None, password=None, ssl_thumbprint=None, subscription_url=None, user_name=None, source_info=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The SubscriptionInfo class defines the subscription behavior for a subscribed library.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• authentication_method (SubscriptionInfo.AuthenticationMethod) – Indicate how the subscribed library should authenticate (BASIC, NONE) with the published library endpoint. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

• automatic_sync_enabled (bool) – Whether the library should participate in automatic library synchronization. In order for automatic synchronization to happen, the global com.vmware.content_client.ConfigurationModel.automatic_sync_enabled option must also be true. The subscription is still active even when automatic synchronization is turned off, but synchronization is only activated with an explicit call to com.vmware.content_client.SubscribedLibrary.sync() or SubscribedItem.sync(). In other words, manual synchronization is still available even when automatic synchronization is disabled. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

• on_demand (bool) –

  Indicates whether a library item’s content will be synchronized only on demand.

  If this is set to true, then the library item’s metadata will be synchronized but the item’s content (its files) will not be synchronized. The Content Library Service will synchronize the content upon request only. This can cause the first use of the content to have a noticeable delay.

  Items without synchronized content can be forcefully synchronized in advance using the SubscribedItem.sync() call with forceSyncContent set to true. Once content has been synchronized, the content can removed with the SubscribedItem.evict() call.

  If this value is set to false, all content will be synchronized in advance. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

• password (str) –

  The password to use when authenticating.

  The password must be set when using a password-based authentication method; empty strings are not allowed. This attribute is optional for the create method. It will not be present in the return value of the get or list methods. It is optional for the update method.

• ssl_thumbprint (str) –

  An optional SHA-1 hash of the SSL certificate for the remote endpoint.

  If this value is defined the SSL certificate will be verified by comparing it to the SSL thumbprint. The SSL certificate must verify against the thumbprint. When specified, the standard certificate chain validation behavior is not used. The certificate chain is validated normally if this value is None. This attribute is optional for the create method. It will not be present in the return value of the get or list methods. It is optional for the update method.

• subscription_url (str) –

  The URL of the endpoint where the metadata for the remotely published library is being served.

  This URL can be the PublishInfo.publish_url of the published library (for example, https://server/path/lib.json).

  If the source content comes from a published library with PublishInfo.persist_json_enabled, the subscription URL can be a URL pointing to the library JSON file on a datastore or remote file system. The supported formats are:

  vSphere 6.5

  • ds:///vmfs/volumes/{uuid}/mylibrary/lib.json (for datastore)

  • nfs://server/path/mylibrary/lib.json (for NFSv3 server on vCenter Server Appliance)

  • nfs://server/path/mylibrary/lib.json?version=4 (for NFSv4 server on vCenter Server Appliance)

  • smb://server/path/mylibrary/lib.json (for SMB server)

  vSphere 6.0

  • file://server/mylibrary/lib.json (for UNC server on vCenter Server for Windows)

  • file:///path/mylibrary/lib.json (for local file system)

  When you specify a DS subscription URL, the datastore must be on the same vCenter Server as the subscribed library. When you specify an NFS or SMB subscription URL, the StorageBacking.storage_uri of the subscribed library must be on the same remote file server and should share a common parent path with the subscription URL. This attribute must be provided for the create method. It will always be present in the return value of the get or list methods. It is optional for the update method.

• user_name (str) –

  The username to use when authenticating.

  The username must be set when using a password-based authentication method. Empty strings are allowed for usernames. This attribute is optional for the create method. It is optional in the return value of the get or list methods. It is optional for the update method.

• source_info (SourceInfo) – Information about the source published library. This attribute will be set for a subscribed library which is associated with a subscription of the published library. This attribute was added in vSphere API 6.7.2. This attribute is optional for the create method. It is optional in the return value of the get or list methods. It is optional for the update method.

class AuthenticationMethod(string)

Bases: vmware.vapi.bindings.enum.Enum

Indicate how the subscribed library should authenticate with the published library endpoint.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the AuthenticationMethod instance.

BASIC = AuthenticationMethod(string='BASIC')

Require HTTP Basic authentication matching a specified username and password.

NONE = AuthenticationMethod(string='NONE')

Require no authentication.

class com.vmware.content.library_client.Subscriptions(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Subscriptions class provides methods for managing the subscription information of the subscribers of a published library. This class was added in vSphere API 6.7.2.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(subscribed_library=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.CreateSpec class defines the information required to create a new subscription of the published library. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

subscribed_library (Subscriptions.CreateSpecSubscribedLibrary) – Specification for the subscribed library to be associated with the subscription. This attribute was added in vSphere API 6.7.2.

class CreateSpecNewSubscribedLibrary(name=None, description=None, storage_backings=None, automatic_sync_enabled=None, on_demand=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.CreateSpecNewSubscribedLibrary class defines the information required to create a new subscribed library. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• name (str) – Name of the subscribed library. This attribute was added in vSphere API 6.7.2.

• description (str or None) – Description of the subscribed library. This attribute was added in vSphere API 6.7.2. If None, the description will be an empty string.

• storage_backings (list of StorageBacking) –

  The list of default storage backings for this library.

  The list must contain exactly one storage backing. Multiple default storage locations are not currently supported but may become supported in future releases.. This attribute was added in vSphere API 6.7.2.

• automatic_sync_enabled (bool) – Specifies whether the library should participate in automatic library synchronization. This attribute was added in vSphere API 6.7.2.

• on_demand (bool) – Specifies whether a library item’s content will be synchronized only on demand. This attribute was added in vSphere API 6.7.2.

class CreateSpecPlacement(folder=None, cluster=None, resource_pool=None, host=None, network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.CreateSpecPlacement class defines the placement information for the subscribed library’s virtual machine template library items. Storage location of the virtual machine template items is defined by the subscribed library’s storage backing. This placement information needs to be compatible with the subscribed library’s storage backing. The Subscriptions.CreateSpecPlacement class is only applicable for the virtual machine template library items of the subscribed library. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• folder (str or None) – Virtual machine folder into which the virtual machine template should be placed. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Folder:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Folder:VCenter. This attribute is currently required. In future, if this is None, the system will attempt to choose a suitable folder for the virtual machine template; if a folder cannot be chosen, publishing a virtual machine template item will fail.

• cluster (str or None) – Cluster onto which the virtual machine template should be placed. If cluster and resourcePool are both specified, resourcePool must belong to cluster. If cluster and host are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource:VCenter. If resourcePool or host is specified, it is recommended that this attribute be None.

• resource_pool (str or None) – Resource pool into which the virtual machine template should be placed. If host and resourcePool are both specified, resourcePool must belong to host. If cluster and resourcePool are both specified, resourcePool must belong to cluster. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ResourcePool:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ResourcePool:VCenter. This attribute is currently required. In future, if this is None, the system will attempt to choose a suitable resource pool for the virtual machine template; if a resource pool cannot be chosen, publish of virtual machine template item will fail.

• host (str or None) – Host onto which the virtual machine template should be placed. If host and resourcePool are both specified, resourcePool must belong to host. If host and cluster are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem:VCenter. If this is None, the system will attempt to choose a suitable host for the virtual machine template; if a host cannot be chosen, publishing the virtual machine template item will fail.

• network (str or None) – Network that backs the virtual Ethernet adapters in the virtual machine template. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter. If None, the virtual Ethernet adapters will not be backed by a network.

class CreateSpecSubscribedLibrary(target=None, new_subscribed_library=None, subscribed_library=None, location=None, vcenter=None, placement=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.CreateSpecSubscribedLibrary class defines the subscribed library information used to create the subscription. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• target (Subscriptions.CreateSpecSubscribedLibrary.Target) – Specifies whether the target subscribed library should be newly created or an existing subscribed library should be used. This attribute was added in vSphere API 6.7.2.

• new_subscribed_library (Subscriptions.CreateSpecNewSubscribedLibrary) – Specification for creating a new subscribed library associated with the subscription. This attribute was added in vSphere API 6.7.2. This attribute is optional and it is only relevant when the value of target is Subscriptions.CreateSpecSubscribedLibrary.Target.CREATE_NEW.

• subscribed_library (str) – Identifier of the existing subscribed library to associate with the subscription. Only the subscribed libraries for which SubscriptionInfo.subscription_url property is set to the PublishInfo.publish_url of the published library can be associated with the subscription. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library. This attribute is optional and it is only relevant when the value of target is Subscriptions.CreateSpecSubscribedLibrary.Target.USE_EXISTING.

• location (Subscriptions.Location) – Location of the subscribed library relative to the published library. This attribute was added in vSphere API 6.7.2.

• vcenter (Subscriptions.CreateSpecVcenter) – Specification for the subscribed library’s vCenter Server instance. This attribute was added in vSphere API 6.7.2. This attribute is optional and it is only relevant when the value of location is Subscriptions.Location.REMOTE.

• placement (Subscriptions.CreateSpecPlacement or None) – Placement specification for the virtual machine template library items on the subscribed library. This attribute was added in vSphere API 6.7.2. This attribute is currently required. In future, if this is None, the system will attempt to choose a suitable placement specification for the virtual machine template items; if a placement specification cannot be chosen, publish of virtual machine template items will fail.

class Target(string)

Bases: vmware.vapi.bindings.enum.Enum

The Subscriptions.CreateSpecSubscribedLibrary.Target class defines the options related to the target subscribed library which will be associated with the subscription. This enumeration was added in vSphere API 6.7.2.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Target instance.

CREATE_NEW = Target(string='CREATE_NEW')

Create a new subscribed library. This class attribute was added in vSphere API 6.7.2.

USE_EXISTING = Target(string='USE_EXISTING')

Use the specified existing subscribed library. This class attribute was added in vSphere API 6.7.2.

class CreateSpecVcenter(hostname=None, https_port=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.CreateSpecVcenter class defines information about the vCenter Server instance where the subscribed library associated with the subscription exists or will be created. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• hostname (str) – The hostname of the subscribed library’s vCenter Server. This attribute was added in vSphere API 6.7.2.

• https_port (long or None) – The HTTPS port of the vCenter Server instance where the subscribed library exists. This attribute was added in vSphere API 6.7.2. If None, port 443 will be used.

class Info(subscribed_library=None, subscribed_library_name=None, subscribed_library_location=None, subscribed_library_vcenter=None, subscribed_library_placement=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.Info class contains information about the subscription. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• subscribed_library (str) – Identifier of the subscribed library associated with the subscription. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library.

• subscribed_library_name (str) – Name of the subscribed library associated with the subscription. This attribute was added in vSphere API 6.7.2.

• subscribed_library_location (Subscriptions.Location) – Location of the subscribed library relative to the published library. This attribute was added in vSphere API 6.7.2.

• subscribed_library_vcenter (Subscriptions.VcenterInfo) – Information about the vCenter Server instance where the subscribed library exists. This attribute was added in vSphere API 6.7.2. This attribute is optional and it is only relevant when the value of subscribedLibraryLocation is Subscriptions.Location.REMOTE.

• subscribed_library_placement (Subscriptions.PlacementInfo) – Placement information about the subscribed library’s virtual machine template items. This attribute was added in vSphere API 6.7.2.

class Location(string)

Bases: vmware.vapi.bindings.enum.Enum

The Subscriptions.Location class defines the location of subscribed library relative to the published library. This enumeration was added in vSphere API 6.7.2.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Location instance.

LOCAL = Location(string='LOCAL')

The subscribed library belongs to the same vCenter instance as the published library. This class attribute was added in vSphere API 6.7.2.

REMOTE = Location(string='REMOTE')

The subscribed library belongs to a different vCenter instance than the published library. This class attribute was added in vSphere API 6.7.2.

class PlacementInfo(folder=None, cluster=None, resource_pool=None, host=None, network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.PlacementInfo class contains the placement information for the subscribed library’s virtual machine template library items. The Subscriptions.PlacementInfo class is only applicable for the virtual machine template library items of the subscribed library. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• folder (str or None) – Virtual machine folder into which the virtual machine template should be placed. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Folder:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Folder:VCenter. The attribute will be None if the subscribed library associated with the subscription does not have a virtual machine folder.

• cluster (str or None) – Cluster onto which the virtual machine template should be placed. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource:VCenter. The attribute will be None if the subscribed library associated with the subscription does not have a cluster.

• resource_pool (str or None) – Resource pool into which the virtual machine template should be placed. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ResourcePool:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ResourcePool:VCenter. The attribute will be None if the subscribed library associated with the subscription does not have a resource pool.

• host (str or None) – Host onto which the virtual machine template should be placed. If host and resourcePool are both specified, resourcePool must belong to host. If host and cluster are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem:VCenter. The attribute will be None if the subscribed library associated with the subscription does not have a host.

• network (str or None) – Network that backs the virtual Ethernet adapters in the virtual machine template. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter. The attribute will be None if the subscribed library associated with the subscription does not have a network.

RESOURCE_TYPE = 'com.vmware.content.library.Subscriptions'

Resource type for Subscription resource. This class attribute was added in vSphere API 6.7.2.

class Summary(subscription=None, subscribed_library=None, subscribed_library_name=None, subscribed_library_vcenter_hostname=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.Summary class contains commonly used information about the subscription. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• subscription (str) – Identifier of the subscription. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.library.Subscriptions. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.library.Subscriptions.

• subscribed_library (str) – Identifier of the subscribed library. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.content.Library. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.content.Library.

• subscribed_library_name (str) – Name of the subscribed library. This attribute was added in vSphere API 6.7.2.

• subscribed_library_vcenter_hostname (str or None) – Hostname of the vCenter instance where the subscribed library exists. This attribute was added in vSphere API 6.7.2. This attribute is unset if the subscribed library is on the same vCenter Server instance as the published library.

class UpdateSpec(subscribed_library_vcenter=None, subscribed_library_placement=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.UpdateSpec class defines information required to update the subscription. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• subscribed_library_vcenter (Subscriptions.UpdateSpecVcenter or None) – Specification for the subscribed library’s vCenter Server instance. This attribute was added in vSphere API 6.7.2. If None, the value is unchanged.

• subscribed_library_placement (Subscriptions.UpdateSpecPlacement or None) – Placement specification for the virtual machine template items of the subscribed library. Updating this information will only affect new or updated items, existing items will not be moved. The entire placement configuration of the subscribed library will replaced by the new specification. This attribute was added in vSphere API 6.7.2. If None, the placement configuration of the subscribed library will be unchanged.

class UpdateSpecPlacement(folder=None, cluster=None, resource_pool=None, host=None, network=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.UpdateSpecPlacement class defines the placement information for the subscribed library’s virtual machine template library items. Storage location of the virtual machine template items is defined by the subscribed library’s storage backing. This placement information needs to be compatible with the subscribed library’s storage backing. The Subscriptions.UpdateSpecPlacement class is only applicable for the newly published virtual machine template library items of the subscribed library. Existing items will not be moved. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• folder (str or None) – Virtual machine folder into which the virtual machine template should be placed. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Folder:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Folder:VCenter. This attribute is currently required. In future, if this is None, the system will attempt to choose a suitable folder for the virtual machine template; if a folder cannot be chosen, publishing a virtual machine template item will fail.

• cluster (str or None) – Cluster onto which the virtual machine template should be placed. If cluster and resourcePool are both specified, resourcePool must belong to cluster. If cluster and host are both specified, host must be a member of cluster. If resourcePool or host is specified, it is recommended that this attribute be None. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ClusterComputeResource:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ClusterComputeResource:VCenter. If resourcePool or host is specified, it is recommended that this attribute be None.

• resource_pool (str or None) – Resource pool into which the virtual machine template should be placed. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: ResourcePool:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: ResourcePool:VCenter. This attribute is currently required. In future, if this is None, the system will attempt to choose a suitable resource pool for the virtual machine template; if a resource pool cannot be chosen, publish of virtual machine template item will fail.

• host (str or None) – Host onto which the virtual machine template should be placed. If host and resourcePool are both specified, resourcePool must belong to host. If host and cluster are both specified, host must be a member of cluster. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: HostSystem:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: HostSystem:VCenter. If this is None, the system will attempt to choose a suitable host for the virtual machine template; if a host cannot be chosen, publishing the virtual machine template item will fail.

• network (str or None) – Network that backs the virtual Ethernet adapters in the virtual machine template. This attribute was added in vSphere API 6.7.2. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: Network:VCenter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: Network:VCenter. If None, newly published virtual machine template library items will not be backed by a network.

class UpdateSpecVcenter(hostname=None, https_port=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.UpdateSpecVcenter class defines information about the vCenter Server instance where the subscribed library associated with the subscription exists. The Subscriptions.UpdateSpecVcenter class is only applicable to subscribed library which exists on remote vCenter Server instance. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• hostname (str or None) – The hostname of the subscribed library’s vCenter Server. This attribute was added in vSphere API 6.7.2. If None, the value is unchanged.

• https_port (long or None) – The HTTPS port of the vCenter Server instance where the subscribed library exists. This attribute was added in vSphere API 6.7.2. If None, the value is unchanged.

class VcenterInfo(hostname=None, https_port=None, server_guid=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Subscriptions.VcenterInfo class contains information about the vCenter Server instance where the subscribed library associated with the subscription exists. This class was added in vSphere API 6.7.2.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

• hostname (str) – Hostname of the vCenter Server instance where the subscribed library exists. This attribute was added in vSphere API 6.7.2.

• https_port (long or None) – The HTTPS port of the vCenter Server instance where the subscribed library exists. This attribute was added in vSphere API 6.7.2. If None, port 443 will be used.

• server_guid (str) – The unique identifier of the vCenter Server where the subscribed library exists. This attribute was added in vSphere API 6.7.2.

create(library, spec, client_token=None)

Creates a subscription of the published library. This method was added in vSphere API 6.7.2.

Parameters

• client_token (str or None) – A unique token generated on the client for each creation request. The token should be a universally unique identifier (UUID), for example: b8a2a2e3-2314-43cd-a871-6ede0f429751. This token can be used to guarantee idempotent creation. If not specified, creation is not idempotent.

• library (str) – Identifier of the published library. The parameter must be an identifier for the resource type: com.vmware.content.Library.

• spec (Subscriptions.CreateSpec) – Specification for the subscription.

Return type

str

Returns

Subscription identifier. The return value will be an identifier for the resource type: com.vmware.content.library.Subscriptions.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists If a subscription of the published library to the specified subscribed library already exists. This is only applicable when subscribedLibrary#subscribedLibrary is specified.

Raise

com.vmware.vapi.std.errors_client.Error If the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound If the library specified by library does not exist.

Raise

com.vmware.vapi.std.errors_client.NotFound If the subscribed library specified by subscribedLibrary#subscribedLibrary does not exist at the vCenter instance specified by subscribedLibrary#vcenter.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible If the vCenter instance specified by subscribedLibrary#vcenter cannot be contacted or found.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If Subscriptions.CreateSpec contains invalid arguments.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType If the library specified by library is a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState If the library specified by library is not a published library.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated If the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.Library referenced by the parameter library requires ContentLibrary.AddSubscription.

delete(library, subscription)

Deletes the specified subscription of the published library. The subscribed library associated with the subscription will not be deleted. This method was added in vSphere API 6.7.2.

Parameters

• library (str) – Identifier of the published library. The parameter must be an identifier for the resource type: com.vmware.content.Library.

• subscription (str) – Subscription identifier. The parameter must be an identifier for the resource type: com.vmware.content.library.Subscriptions.

Raise

com.vmware.vapi.std.errors_client.Error If the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType If the library specified by library is a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState If the library specified by library is not a published library.

Raise

com.vmware.vapi.std.errors_client.NotFound If the library specified by library does not exist.

Raise

com.vmware.vapi.std.errors_client.NotFound If the subscription specified by subscription does not exist for the library specified by library.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated If the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.Library referenced by the parameter library requires ContentLibrary.DeleteSubscription.

get(library, subscription)

Returns information about the specified subscription of the published library. This method was added in vSphere API 6.7.2.

Parameters

• library (str) – Identifier of the published library. The parameter must be an identifier for the resource type: com.vmware.content.Library.

• subscription (str) – Identifier of the subscription. The parameter must be an identifier for the resource type: com.vmware.content.library.Subscriptions.

Return type

Subscriptions.Info

Returns

Information about the subscription.

Raise

com.vmware.vapi.std.errors_client.Error If the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound If the library specified by library does not exist.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If the subscription is not valid.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType If the library specified by library is a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState If the library specified by library is not a published library.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated If the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.Library referenced by the parameter library requires System.Read.

list(library)

Lists the subscriptions of the published library. This method was added in vSphere API 6.7.2.

Parameters

library (str) – Identifier of the published library. The parameter must be an identifier for the resource type: com.vmware.content.Library.

Return type

list of Subscriptions.Summary

Returns

List of commonly used information about subscriptions of the published library.

Raise

com.vmware.vapi.std.errors_client.Error If the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType If the library specified by library is a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotFound If the library specified by library does not exist.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState If the library specified by library is not a published library.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated If the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.Library referenced by the parameter library requires System.Read.

update(library, subscription, spec)

Updates the specified subscription of the published library.

This is an incremental update to the subscription. Except for the Subscriptions.UpdateSpecPlacement class, attributes that are None in the update specification will be left unchanged. If spec#subscribedLibraryPlacement is specified, all attributes of the current subscribed library placement will be replaced by this placement.. This method was added in vSphere API 6.7.2.

Parameters

• library (str) – Identifier of the published library. The parameter must be an identifier for the resource type: com.vmware.content.Library.

• subscription (str) – subscription identifier. The parameter must be an identifier for the resource type: com.vmware.content.library.Subscriptions.

• spec (Subscriptions.UpdateSpec) – Specification of the new property values to set on the subscription.

Raise

com.vmware.vapi.std.errors_client.Error If the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound If the library specified by library does not exist.

Raise

com.vmware.vapi.std.errors_client.NotFound If the subscription specified by subscription does not exist for the library specified by library.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible If the subscribed library cannot be contacted or found.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument If Subscriptions.UpdateSpec contains invalid arguments.

Raise

com.vmware.vapi.std.errors_client.InvalidElementType If the library specified by library is a subscribed library.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState If the library specified by library is not a published library.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated If the user that requested the method cannot be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized If the user that requested the method is not authorized to perform the method.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if you do not have all of the privileges described as follows:

• The resource com.vmware.content.Library referenced by the parameter library requires ContentLibrary.UpdateSubscription.