com.vmware.appliance.recovery package¶

Subpackages¶

com.vmware.appliance.recovery.backup package

Submodules¶

com.vmware.appliance.recovery.backup_client module¶

class com.vmware.appliance.recovery.backup_client.Job(config)¶

Bases: vmware.vapi.bindings.stub.VapiInterface

The Job class provides methods to be performed on a backup job.

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class BackupJobStatus(id=None, state=None, messages=None, progress=None, start_time=None, end_time=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Job.BackupJobStatus class represents the status of a backup/restore job.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

id (str) – TimeStamp based ID.
state (Job.BackupRestoreProcessState) – The state of the backup job.
messages (list of Job.LocalizableMessage) – List of messages.
progress (long) – Progress of the job in percentage.
start_time (datetime.datetime) – Time when the backup was started.
end_time (datetime.datetime or None) – Time when the backup was finished. If None end time is None until backup is finished.

class BackupRequest(parts=None, backup_password=None, location_type=None, location=None, location_user=None, location_password=None, comment=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Job.BackupRequest class represents a requested backup piece.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

parts (list of str) – List of optional parts that will be included in the backup. Use the Parts.list() method to get information about the supported parts.
backup_password (str or None) – Password for a backup piece. The backupPassword must adhere to the following password requirements: At least 8 characters, cannot be more than 20 characters in length. At least 1 uppercase letter. At least 1 lowercase letter. At least 1 numeric digit. At least 1 special character (i.e. any character not in [0-9,a-z,A-Z]). Only visible ASCII characters (for example, no space). backupPassword If no password then the piece will not be encrypted
location_type (Job.LocationType) – Type of backup location.
location (str) – Path or URL of the backup location.
location_user (str or None) – Username for the given location. If None authentication will not be used for the specified location.
location_password (str or None) – Password for the given location. If None authentication will not be used for the specified location.
comment (str or None) – Custom comment provided by the user. If None comment will be empty.

class BackupRestoreProcessState(string)¶

Bases: vmware.vapi.bindings.enum.Enum

The Job.BackupRestoreProcessState class defines the possible states of a backup/restore process.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the BackupRestoreProcessState instance.

FAILED = BackupRestoreProcessState(string='FAILED')¶: Backup/Restore job failed.

INPROGRESS = BackupRestoreProcessState(string='INPROGRESS')¶: Backup/Restore job is in progress.

NONE = BackupRestoreProcessState(string='NONE')¶: Backup/Restore job is not started.

SUCCEEDED = BackupRestoreProcessState(string='SUCCEEDED')¶: Backup/Restore job completed successfully.

class LocalizableMessage(id=None, default_message=None, args=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Job.LocalizableMessage class represents a localizable message.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

id (str) – Id in message bundle.
default_message (str) – Text in english.
args (list of str) – Nested data.

class LocationType(string)¶

Bases: vmware.vapi.bindings.enum.Enum

The Job.LocationType class defines the type of destination location for backup/restore. You specify the location type when you create a backup job. See Job.BackupRequest.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the LocationType instance.

FTP = LocationType(string='FTP')¶: Destination is FTP server.

FTPS = LocationType(string='FTPS')¶: Destination is FTPS server.

HTTP = LocationType(string='HTTP')¶: Destination is HTTP server.

HTTPS = LocationType(string='HTTPS')¶: Destination is HTTPS server.

NFS = LocationType(string='NFS')¶: Destination is NFS server. This class attribute was added in vSphere API 6.7.2.

SCP = LocationType(string='SCP')¶: Destination is SSH server.

SFTP = LocationType(string='SFTP')¶: Destination is SFTP server.

SMB = LocationType(string='SMB')¶: Destination is SMB server. This class attribute was added in vSphere API 6.7.2.

class ReturnResult(status=None, messages=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Job.ReturnResult class contains the result information for the cancel operation.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

status (Job.ReturnStatus) – Status of the cancel operation.
messages (list of Job.LocalizableMessage) – List of messages.

class ReturnStatus(string)¶

Bases: vmware.vapi.bindings.enum.Enum

The Job.ReturnStatus class defines the return type for the cancel operation. You specify the return status when you return the result of cancel job. See Job.ReturnResult.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the ReturnStatus instance.

FAIL = ReturnStatus(string='FAIL')¶: Cancel operation failed.

OK = ReturnStatus(string='OK')¶: Cancel operation succeeded.

WARNING = ReturnStatus(string='WARNING')¶: Cancel operation passed with warnings.

cancel(id)¶

Cancel the backup job.

Parameters: id (str) – ID (ID of job) The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.job.
Return type: Job.ReturnResult
Returns: BackupJobStatus Structure
Raise: com.vmware.vapi.std.errors_client.NotFound if backup associated with id does not exist.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

create(piece)¶

Initiate backup.

Parameters: piece (Job.BackupRequest) – BackupRequest Structure
Return type: Job.BackupJobStatus
Returns: BackupJobStatus Structure
Raise: com.vmware.vapi.std.errors_client.FeatureInUse A backup or restore is already in progress.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

get(id)¶

See backup job progress/result.

Parameters: id (str) – ID (ID of job) The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.job.
Return type: Job.BackupJobStatus
Returns: BackupJobStatus Structure
Raise: com.vmware.vapi.std.errors_client.NotFound if backup associated with id does not exist.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

list()¶

Get list of backup jobs

Return type: list of str
Returns: list of BackupJob IDs The return value will contain identifiers for the resource type: com.vmware.appliance.recovery.backup.job.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

class com.vmware.appliance.recovery.backup_client.LocationSpec(location=None, location_user=None, location_password=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The LocationSpec class has fields to represent a location on the backup server. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

location (str) – Backup location URL. This attribute was added in vSphere API 6.7.
location_user (str or None) – Username for the given location. This attribute was added in vSphere API 6.7. If None authentication will not be used.
location_password (str or None) – Password for the given location. This attribute was added in vSphere API 6.7. If None authentication will not be used.

class com.vmware.appliance.recovery.backup_client.Parts(config)¶

Bases: vmware.vapi.bindings.stub.VapiInterface

Parts class provides methods Provides list of parts optional for the backup

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class LocalizableMessage(id=None, default_message=None, args=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

Parts.LocalizableMessage class Structure representing message

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

id (str) – id in message bundle
default_message (str) – text in english
args (list of str) – nested data

class Part(id=None, name=None, description=None, selected_by_default=None, optional=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

Parts.Part class Structure representing backup restore part

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

id (str) – part ID When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.appliance.recovery.backup.parts. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.appliance.recovery.backup.parts.
name (Parts.LocalizableMessage) – part name id in message bundle
description (Parts.LocalizableMessage) – part description id in message bundle
selected_by_default (bool) – Is this part selected by default in the user interface.
optional (bool) – Is this part optional.

get(id)¶

Gets the size (in MB) of the part.

Parameters: id (str) – Identifier of the part. The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.parts.
Return type: long
Returns: long Size of the part in megabytes.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

list()¶

Gets a list of the backup parts.

Return type: list of Parts.Part
Returns: Information about each of the backup parts.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

class com.vmware.appliance.recovery.backup_client.Schedules(config)¶

Bases: vmware.vapi.bindings.stub.VapiInterface

The Schedules class provides methods to be performed to manage backup schedules. This class was added in vSphere API 6.7.

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(parts=None, backup_password=None, location=None, location_user=None, location_password=None, enable=None, recurrence_info=None, retention_info=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Schedules.CreateSpec class contains fields to be specified for creating a new schedule. The structure includes parts, location information, encryption password and enable flag. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

parts (list of str or None) – List of optional parts to be backed up. Use the Parts.list() method to get information about the supported parts. This attribute was added in vSphere API 6.7. If None all the optional parts will not be backed up.
backup_password (str or None) – Password for a backup piece. The backupPassword must adhere to the following password requirements: At least 8 characters, cannot be more than 20 characters in length. At least 1 uppercase letter. At least 1 lowercase letter. At least 1 numeric digit. At least 1 special character (i.e. any character not in [0-9,a-z,A-Z]). Only visible ASCII characters (for example, no space). This attribute was added in vSphere API 6.7. If None the backup piece will not be encrypted.
location (str) – URL of the backup location. This attribute was added in vSphere API 6.7.
location_user (str or None) – Username for the given location. This attribute was added in vSphere API 6.7. If None authentication will not be used for the specified location.
location_password (str or None) – Password for the given location. This attribute was added in vSphere API 6.7. If None authentication will not be used for the specified location.
enable (bool or None) – Enable or disable a schedule. This attribute was added in vSphere API 6.7. If None the schedule will be enabled.
recurrence_info (Schedules.RecurrenceInfo or None) – Recurrence information for the schedule. This attribute was added in vSphere API 6.7. If None backup job will not be scheduled. See Schedules.RecurrenceInfo
retention_info (Schedules.RetentionInfo or None) – Retention information for the schedule. This attribute was added in vSphere API 6.7. If None all the completed backup jobs will be retained forever. See Schedules.RetentionInfo

class DayOfWeek(string)¶

Bases: vmware.vapi.bindings.enum.Enum

The Schedules.DayOfWeek class defines the set of days when backup can be scheduled. The days can be specified as a list of individual days. You specify the days when you set the recurrence for a schedule. See Schedules.RecurrenceInfo.days. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the DayOfWeek instance.

FRIDAY = DayOfWeek(string='FRIDAY')¶: Friday. This class attribute was added in vSphere API 6.7.

MONDAY = DayOfWeek(string='MONDAY')¶: Monday. This class attribute was added in vSphere API 6.7.

SATURDAY = DayOfWeek(string='SATURDAY')¶: Saturday. This class attribute was added in vSphere API 6.7.

SUNDAY = DayOfWeek(string='SUNDAY')¶: Sunday. This class attribute was added in vSphere API 6.7.

THURSDAY = DayOfWeek(string='THURSDAY')¶: Thursday. This class attribute was added in vSphere API 6.7.

TUESDAY = DayOfWeek(string='TUESDAY')¶: Tuesday. This class attribute was added in vSphere API 6.7.

WEDNESDAY = DayOfWeek(string='WEDNESDAY')¶: Wednesday. This class attribute was added in vSphere API 6.7.

class Info(parts=None, location=None, location_user=None, enable=None, recurrence_info=None, retention_info=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Schedules.Info class contains information about an existing schedule. The structure includes Schedule ID, parts, location information, encryption password, enable flag, recurrence and retention information. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

parts (list of str) – List of optional parts that will be included in backups based on this schedule details. Use the Parts.list() method to get information about the supported parts. This attribute was added in vSphere API 6.7.
location (str) – URL of the backup location. This attribute was added in vSphere API 6.7.
location_user (str or None) – Username for the given location. This attribute was added in vSphere API 6.7. If None location user will not be used.
enable (bool) – Enable or disable a schedule, by default when created a schedule will be enabled. This attribute was added in vSphere API 6.7.
recurrence_info (Schedules.RecurrenceInfo or None) – Recurrence information for the schedule. This attribute was added in vSphere API 6.7. If None backup job is not scheduled. See Schedules.RecurrenceInfo
retention_info (Schedules.RetentionInfo or None) – Retention information for the schedule. This attribute was added in vSphere API 6.7. If None all the completed backup jobs are retained forever. See Schedules.RetentionInfo

class RecurrenceInfo(minute=None, hour=None, days=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Schedules.RecurrenceInfo class contains the recurrence information associated with a schedule. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

minute (long) – Minute when backup should run. This attribute was added in vSphere API 6.7.
hour (long) – Hour when backup should run. The hour should be specified in 24-hour clock format. This attribute was added in vSphere API 6.7.
days (list of Schedules.DayOfWeek or None) – Day of week when the backup should be run. Days can be specified as list of days. This attribute was added in vSphere API 6.7. If None the backup will be run everyday.

class RetentionInfo(max_count=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Schedules.RetentionInfo class contains retention information associated with a schedule. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters: max_count (long) – Number of backups which should be retained. If retention is not set, all the backups will be retained forever. This attribute was added in vSphere API 6.7.

class UpdateSpec(parts=None, backup_password=None, location=None, location_user=None, location_password=None, enable=None, recurrence_info=None, retention_info=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Schedules.UpdateSpec class contains the fields of the existing schedule which can be updated. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

parts (list of str or None) – List of optional parts. Use the Parts.list() method to get information about the supported parts. This attribute was added in vSphere API 6.7. If None the value will not be changed.
backup_password (str or None) – Password for a backup piece. The backupPassword must adhere to the following password requirements: At least 8 characters, cannot be more than 20 characters in length. At least 1 uppercase letter. At least 1 lowercase letter. At least 1 numeric digit. At least 1 special character (i.e. any character not in [0-9,a-z,A-Z]). Only visible ASCII characters (for example, no space). This attribute was added in vSphere API 6.7. If None the value will not be changed.
location (str or None) – URL of the backup location. This attribute was added in vSphere API 6.7. If None the value will not be changed.
location_user (str or None) – Username for the given location. This attribute was added in vSphere API 6.7. If None the value will not be changed.
location_password (str or None) – Password for the given location. This attribute was added in vSphere API 6.7. If None the value will not be changed.
enable (bool or None) – Enable or disable a schedule. This attribute was added in vSphere API 6.7. If None the value will not be changed.
recurrence_info (Schedules.RecurrenceInfo or None) – Recurrence information for the schedule. This attribute was added in vSphere API 6.7. If None the infomration will not be changed. See Schedules.RecurrenceInfo
retention_info (Schedules.RetentionInfo or None) – Retention information for the schedule. This attribute was added in vSphere API 6.7. If None the information will not be changed. See Schedules.RetentionInfo

create(schedule, spec)¶

Creates a schedule. This method was added in vSphere API 6.7.

Parameters

schedule (str) – Identifier of the schedule The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.schedule.
spec (Schedules.CreateSpec) – CreateSpec Structure

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if provided with invalid schedule specification.

Raise

com.vmware.vapi.std.errors_client.AlreadyExists if the schedule with the given id already exists.

Raise

com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

delete(schedule)¶

Deletes an existing schedule. This method was added in vSphere API 6.7.

Parameters: schedule (str) – Identifier of the schedule The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.schedule.
Raise: com.vmware.vapi.std.errors_client.NotFound if schedule associated with id does not exist.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

get(schedule)¶

Returns an existing schedule information based on id. This method was added in vSphere API 6.7.

Parameters: schedule (str) – Identifier of the schedule The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.schedule.
Return type: Schedules.Info
Returns: Info Structure
Raise: com.vmware.vapi.std.errors_client.NotFound if schedule associated with id does not exist.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

list()¶

Returns a list of existing schedules with details. This method was added in vSphere API 6.7.

Return type: dict of str and Schedules.Info
Returns: Map of schedule id to Info Structure The key in the return value dict will be an identifier for the resource type: com.vmware.appliance.recovery.backup.schedule.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

run(schedule, comment=None)¶

Initiate backup with the specified schedule. This method was added in vSphere API 6.7.

Parameters

schedule (str) – Identifier of the schedule The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.schedule.
comment (str or None) – field that specifies the description for the backup. If None the backup will have an empty comment.

Return type

Job.BackupJobStatus

Returns

BackupJobStatus Structure

Raise

com.vmware.vapi.std.errors_client.FeatureInUse if a backup or restore is already in progress.

Raise

com.vmware.vapi.std.errors_client.NotFound if schedule associated with id does not exist.

Raise

com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

update(schedule, spec)¶

Updates a schedule. This method was added in vSphere API 6.7.

Parameters

schedule (str) – Identifier of the schedule The parameter must be an identifier for the resource type: com.vmware.appliance.recovery.backup.schedule.
spec (Schedules.UpdateSpec) – UpdateSpec Structure

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if provided with invalid schedule specification.

Raise

com.vmware.vapi.std.errors_client.NotFound if schedule associated with id does not exist.

Raise

com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

class com.vmware.appliance.recovery.backup_client.StubFactory(stub_config)¶

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters: stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

class com.vmware.appliance.recovery.backup_client.SystemName(config)¶

Bases: vmware.vapi.bindings.stub.VapiInterface

The SystemName class provides methods to enumerate system names of appliance backups. This class was added in vSphere API 6.7.

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

list(loc_spec)¶

Returns a list of system names for which backup archives exist under loc_spec. This method was added in vSphere API 6.7.

Parameters: loc_spec (LocationSpec) – LocationSpec Structure
Return type: list of str
Returns: list of system names The return value will contain identifiers for the resource type: com.vmware.appliance.recovery.backup.system_name.
Raise: com.vmware.vapi.std.errors_client.NotFound if loc_spec doesn’t refer to an existing location on the backup server.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

com.vmware.appliance.recovery.reconciliation_client module¶

class com.vmware.appliance.recovery.reconciliation_client.Job(config)¶

Bases: vmware.vapi.bindings.stub.VapiInterface

The Job class provides methods to create and get the status of reconciliation job. This class was added in vSphere API 6.7.

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(sso_admin_user_name=None, sso_admin_user_password=None, ignore_warnings=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Job.CreateSpec class has the fields to request the start of reconciliation job. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

sso_admin_user_name (str or None) – Administrators username for SSO. This attribute was added in vSphere API 6.7. If None SSO authentication will not be used. If the vCenter Server is a management node or an embedded node, authentication is required.
sso_admin_user_password (str or None) – Password for SSO admin user. This attribute was added in vSphere API 6.7. If None SSO authentication will not be used. If the vCenter Server is a management node or an embedded node, authentication is required.
ignore_warnings (bool or None) – Flag indicating whether warnings should be ignored during reconciliation. This attribute was added in vSphere API 6.7. If None, validation warnings will fail the reconciliation operation.

class Info(description=None, service=None, operation=None, parent=None, target=None, status=None, cancelable=None, error=None, start_time=None, end_time=None, messages=None, progress=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

The Job.Info class represents the reconciliation job information. It contains information related to current Status, any associated messages and progress as percentage. This class was added in vSphere API 6.7.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

description (com.vmware.vapi.std_client.LocalizableMessage) – Description of the operation associated with the task. This attribute was added in vSphere API 6.7.
service (str) – Name of the service containing the operation. This attribute was added in vSphere API 6.7. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.appliance.recovery.reconciliation.job. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.appliance.recovery.reconciliation.job.
operation (str) – Name of the operation associated with the task. This attribute was added in vSphere API 6.7.
parent (str or None) – Parent of the current task. This attribute was added in vSphere API 6.7. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.appliance.recovery.reconciliation.job. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.appliance.recovery.reconciliation.job. This attribute will be None if the task has no parent.
target (com.vmware.vapi.std_client.DynamicID or None) – Identifier of the target resource the operation modifies. This attribute was added in vSphere API 6.7. This attribute will be None if the task has multiple targets or no target.
status (Job.Status) – Status of the operation associated with the task. This attribute was added in vSphere API 6.7.
cancelable (bool or None) – Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. This attribute was added in vSphere API 6.7. If None, the operation cannot be canceled.
error (Exception or None) – Description of the error if the operation status is “FAILED”. This attribute was added in vSphere API 6.7. If None the description of why the operation failed will be included in the result of the operation (see null).
start_time (datetime.datetime) – Time when the operation is started. This attribute was added in vSphere API 6.7. This attribute is optional and it is only relevant when the value of status is one of Job.Status.RUNNING, Job.Status.SUCCEEDED, or Job.Status.FAILED.
end_time (datetime.datetime) – Time when the operation is completed. This attribute was added in vSphere API 6.7. This attribute is optional and it is only relevant when the value of status is one of Job.Status.SUCCEEDED or Job.Status.FAILED.
messages (list of com.vmware.vapi.std_client.LocalizableMessage) – A list of localized messages. This attribute was added in vSphere API 6.7.
progress (long) – The progress of the job as a percentage. This attribute was added in vSphere API 6.7.

class Status(string)¶

Bases: vmware.vapi.bindings.enum.Enum

The Job.Status class defines the status values that can be reported for an operation. This enumeration was added in vSphere API 6.7.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the Status instance.

FAILED = Status(string='FAILED')¶: The operation failed. This class attribute was added in vSphere API 6.7.

NONE = Status(string='NONE')¶: The operation is not running. This class attribute was added in vSphere API 6.7.

RUNNING = Status(string='RUNNING')¶: The operation is in progress. This class attribute was added in vSphere API 6.7.

SUCCEEDED = Status(string='SUCCEEDED')¶: The operation completed successfully. This class attribute was added in vSphere API 6.7.

create(spec)¶

Initiate reconciliation. This method was added in vSphere API 6.7.

Parameters: spec (Job.CreateSpec) – CreateSpec Structure
Return type: Job.Info
Returns: Info Structure
Raise: com.vmware.vapi.std.errors_client.FeatureInUse A backup or restore is already in progress.
Raise: com.vmware.vapi.std.errors_client.NotAllowedInCurrentState Reconciliation is allowed only after restore has finished successfully.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

get()¶

Get reconciliation job progress/result. This method was added in vSphere API 6.7.

Return type: Job.Info
Returns: Info Structure
Raise: com.vmware.vapi.std.errors_client.NotFound if there is no running reconciliation job.
Raise: com.vmware.vapi.std.errors_client.Error if any error occurs during the execution of the operation.

class com.vmware.appliance.recovery.reconciliation_client.StubFactory(stub_config)¶

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters: stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.appliance.recovery.restore_client module¶

class com.vmware.appliance.recovery.restore_client.Job(config)¶

Bases: vmware.vapi.bindings.stub.VapiInterface

Job class provides methods Performs restore operations

Parameters: config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class BackupRestoreProcessState(string)¶

Bases: vmware.vapi.bindings.enum.Enum

Job.BackupRestoreProcessState class Defines state of backup/restore process

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the BackupRestoreProcessState instance.

FAILED = BackupRestoreProcessState(string='FAILED')¶: Failed

INPROGRESS = BackupRestoreProcessState(string='INPROGRESS')¶: In progress

NONE = BackupRestoreProcessState(string='NONE')¶: Not started

SUCCEEDED = BackupRestoreProcessState(string='SUCCEEDED')¶: Completed successfully

class LocalizableMessage(id=None, default_message=None, args=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

Job.LocalizableMessage class Structure representing message

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

id (str) – id in message bundle
default_message (str) – text in english
args (list of str) – nested data

class LocationType(string)¶

Bases: vmware.vapi.bindings.enum.Enum

Job.LocationType class Defines type of all locations for backup/restore

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the LocationType instance.

FTP = LocationType(string='FTP')¶: Destination is FTP server

FTPS = LocationType(string='FTPS')¶: Destination is FTPS server

HTTP = LocationType(string='HTTP')¶: Destination is HTTP server

HTTPS = LocationType(string='HTTPS')¶: Destination is HTTPS server

NFS = LocationType(string='NFS')¶: Destination is NFS server. This class attribute was added in vSphere API 6.7.2.

SCP = LocationType(string='SCP')¶: Destination is SSH server

SFTP = LocationType(string='SFTP')¶: Destination is SFTP server

SMB = LocationType(string='SMB')¶: Destination is SMB server. This class attribute was added in vSphere API 6.7.2.

class RestoreJobStatus(state=None, messages=None, progress=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

Job.RestoreJobStatus class Structure representing backup restore status

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

state (Job.BackupRestoreProcessState) – process state
messages (list of Job.LocalizableMessage) – list of messages
progress (long) – percentage complete

class RestoreRequest(backup_password=None, location_type=None, location=None, location_user=None, location_password=None, sso_admin_user_name=None, sso_admin_user_password=None, ignore_warnings=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

Job.RestoreRequest class Structure representing requested restore piece

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

backup_password (str or None) – a password for a backup piece backupPassword If no password then the piece will not be decrypted
location_type (Job.LocationType) – a type of location
location (str) – path or url
location_user (str or None) – username for location locationUser User name for this location if login is required.
location_password (str or None) – password for location locationPassword Password for the specified user if login is required at this location.
sso_admin_user_name (str or None) – Administrators Username for SSO. This attribute was added in vSphere API 6.7. If None SSO authentication will not be used. If the vCenter Server is a management node or an embedded node, authentication is required.
sso_admin_user_password (str or None) – The password for SSO admin user. This attribute was added in vSphere API 6.7. If None SSO authentication will not be used. If the vCenter Server is a management node or an embedded node, authentication is required.
ignore_warnings (bool or None) – The flag to ignore warnings during restore. This attribute was added in vSphere API 6.7. If None, validation warnings will fail the restore operation

class ReturnResult(status=None, messages=None)¶

Bases: vmware.vapi.bindings.struct.VapiStruct

Job.ReturnResult class Structure representing precheck result

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

status (Job.ReturnStatus) – Check status
messages (list of Job.LocalizableMessage) – List of messages

class ReturnStatus(string)¶

Bases: vmware.vapi.bindings.enum.Enum

Job.ReturnStatus class Defines the state of precheck

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters: string (str) – String value for the ReturnStatus instance.

FAIL = ReturnStatus(string='FAIL')¶: Check failed

OK = ReturnStatus(string='OK')¶: Check passed

WARNING = ReturnStatus(string='WARNING')¶: Passed with warnings

cancel()¶

Cancel the restore job

Return type: Job.ReturnResult
Returns: RestoreJobStatus Structure
Raise: com.vmware.vapi.std.errors_client.Error Generic error

create(piece)¶

Initiate restore.

Parameters: piece (Job.RestoreRequest) – RestoreRequest Structure
Return type: Job.RestoreJobStatus
Returns: RestoreJobStatus Structure
Raise: com.vmware.vapi.std.errors_client.FeatureInUse A backup or restore is already in progress
Raise: com.vmware.vapi.std.errors_client.NotAllowedInCurrentState Restore is allowed only after deployment and before firstboot
Raise: com.vmware.vapi.std.errors_client.Error Generic error

get()¶

See restore job progress/result.

Return type: Job.RestoreJobStatus
Returns: RestoreJobStatus Structure
Raise: com.vmware.vapi.std.errors_client.Error Generic error

class com.vmware.appliance.recovery.restore_client.StubFactory(stub_config)¶

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters: stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance