com.vmware.vcenter.vm.hardware package

Submodules

com.vmware.vcenter.vm.hardware.adapter_client module

The com.vmware.vcenter.vm.hardware.adapter_client module provides classes for managing the configuration and state of the virtual adapters belonging to a virtual machine. This includes methods for reading and manipulating the conifguration of USB adapters and host bus adapters.

Note that classes for adapters with no configurable properties or runtime state, such as IDE and PCI adapters, are omitted.

class com.vmware.vcenter.vm.hardware.adapter_client.Sata(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Sata class provides methods for configuring the virtual SATA adapters of a virtual machine.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(type=None, bus=None, pci_slot_number=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Sata.CreateSpec class provides a specification for the configuration of a newly-created virtual SATA adapter.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (Sata.Type or None) – Adapter type. If None, a guest-specific default value will be used.

  • bus (long or None) – SATA bus number. If None, the server will choose an available bus number; if none is available, the request will fail.

  • pci_slot_number (long or None) – Address of the SATA adapter on the PCI bus. If None, the server will choose an available address when the virtual machine is powered on.

class Info(label=None, type=None, bus=None, pci_slot_number=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Sata.Info class contains information about a virtual SATA adapter.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • label (str) – Device label.

  • type (Sata.Type) – Adapter type.

  • bus (long) – SATA bus number.

  • pci_slot_number (long or None) – Address of the SATA adapter on the PCI bus. May be None if the virtual machine has never been powered on since the adapter was created.

RESOURCE_TYPE = 'com.vmware.vcenter.vm.hardware.SataAdapter'

Resource type for the virtual SATA adapter device.

class Summary(adapter=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Sata.Summary class contains commonly used information about a Virtual SATA adapter.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

adapter (str) – Identifier of the virtual SATA adapter. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.SataAdapter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.SataAdapter.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The Sata.Type class defines the valid emulation types for a virtual SATA adapter.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

AHCI = Type(string='AHCI')

AHCI host bus adapter.

create(vm, spec)

Adds a virtual SATA adapter to the virtual machine.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • spec (Sata.CreateSpec) – Specification for the new virtual SATA adapter.

Return type

str

Returns

Virtual SATA adapter identifier. The return value will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.SataAdapter.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.Error if the system reported that the SATA adapter was created but was unable to confirm the creation because the identifier of the new adapter could not be determined.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is suspended

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if there are no more available SATA buses on the virtual machine.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if the specified SATA bus or PCI address is in use.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the specified SATA bus or PCI address is out of bounds.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the guest operating system of the virtual machine is not supported and spec includes None attributes that default to guest-specific values.

delete(vm, adapter)

Removes a virtual SATA adapter from the virtual machine.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • adapter (str) – Virtual SATA adapter identifier. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.SataAdapter.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is suspended

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine or virtual SATA adapter is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

get(vm, adapter)

Returns information about a virtual SATA adapter.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • adapter (str) – Virtual SATA adapter identifier. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.SataAdapter.

Return type

Sata.Info

Returns

Information about the specified virtual SATA adapter.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine or virtual SATA adapter is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

list(vm)

Returns commonly used information about the virtual SATA adapters belonging to the virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

list of Sata.Summary

Returns

List of commonly used information about virtual SATA adapters.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

class com.vmware.vcenter.vm.hardware.adapter_client.Scsi(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Scsi class provides methods for configuring the virtual SCSI adapters of a virtual machine.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class CreateSpec(type=None, bus=None, pci_slot_number=None, sharing=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Scsi.CreateSpec class provides a specification for the configuration of a newly-created virtual SCSI adapter.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (Scsi.Type or None) – Adapter type. If None, a guest-specific default value will be used.

  • bus (long or None) – SCSI bus number. If None, the server will choose an available bus number; if none is available, the request will fail.

  • pci_slot_number (long or None) – Address of the SCSI adapter on the PCI bus. If the PCI address is invalid, the server will change it when the VM is started or as the device is hot added. If None, the server will choose an available address when the virtual machine is powered on.

  • sharing (Scsi.Sharing or None) – Bus sharing mode. If None, the adapter will default to Scsi.Sharing.NONE.

class Info(label=None, type=None, scsi=None, pci_slot_number=None, sharing=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Scsi.Info class contains information about a virtual SCSI adapter.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • label (str) – Device label.

  • type (Scsi.Type) – Adapter type.

  • scsi (com.vmware.vcenter.vm.hardware_client.ScsiAddressInfo) – Address of the SCSI adapter on the SCSI bus.

  • pci_slot_number (long or None) – Address of the SCSI adapter on the PCI bus. If the PCI address is invalid, the server will change it when the VM is started or as the device is hot added. May be None if the virtual machine has never been powered on since the adapter was created.

  • sharing (Scsi.Sharing) – Bus sharing mode.

RESOURCE_TYPE = 'com.vmware.vcenter.vm.hardware.ScsiAdapter'

Resource type for the virtual SCSI adapter device.

class Sharing(string)

Bases: vmware.vapi.bindings.enum.Enum

The Scsi.Sharing class defines the valid bus sharing modes for a virtual SCSI adapter.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Sharing instance.

NONE = Sharing(string='NONE')

The virtual SCSI bus is not shared.

PHYSICAL = Sharing(string='PHYSICAL')

The virtual SCSI bus is shared between two or more virtual machines residing on different physical hosts.

VIRTUAL = Sharing(string='VIRTUAL')

The virtual SCSI bus is shared between two or more virtual machines. In this case, no physical machine is involved.

class Summary(adapter=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Scsi.Summary class contains commonly used information about a Virtual SCSI adapter.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

adapter (str) – Identifier of the virtual SCSI adapter. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.ScsiAdapter. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.ScsiAdapter.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The Scsi.Type class defines the valid emulation types for a virtual SCSI adapter.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

BUSLOGIC = Type(string='BUSLOGIC')

BusLogic host bus adapter.

LSILOGIC = Type(string='LSILOGIC')

LSI Logic host bus adapter.

LSILOGICSAS = Type(string='LSILOGICSAS')

LSI Logic SAS 1068 host bus adapter.

PVSCSI = Type(string='PVSCSI')

Paravirtualized host bus adapter.

class UpdateSpec(sharing=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Scsi.UpdateSpec class describes the updates to be made to the configuration of a virtual SCSI adapter.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

sharing (Scsi.Sharing or None) –

Bus sharing mode.

This attribute may only be modified if the virtual machine is not powered on. If None, the value is unchanged.

create(vm, spec)

Adds a virtual SCSI adapter to the virtual machine.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • spec (Scsi.CreateSpec) – Specification for the new virtual SCSI adapter.

Return type

str

Returns

Virtual SCSI adapter identifier. The return value will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.ScsiAdapter.

Raise

com.vmware.vapi.std.errors_client.Error if the system reported that the SCSI adapter was created but was unable to confirm the creation because the identifier of the new adapter could not be determined.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is suspended

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.UnableToAllocateResource if there are no more available SCSI buses on the virtual machine.

Raise

com.vmware.vapi.std.errors_client.ResourceInUse if the specified SCSI bus is in use.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if the specified SATA bus or PCI address is out of bounds.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

Raise

com.vmware.vapi.std.errors_client.Unsupported if the guest operating system of the virtual machine is not supported and spec includes None attributes that default to guest-specific values.

delete(vm, adapter)

Removes a virtual SCSI adapter from the virtual machine.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • adapter (str) – Virtual SCSI adapter identifier. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.ScsiAdapter.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if the virtual machine is suspended

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine or virtual SCSI adapter is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

get(vm, adapter)

Returns information about a virtual SCSI adapter.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • adapter (str) – Virtual SCSI adapter identifier. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.ScsiAdapter.

Return type

Scsi.Info

Returns

Information about the specified virtual SCSI adapter.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine or virtual SCSI adapter is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

list(vm)

Returns commonly used information about the virtual SCSI adapters belonging to the virtual machine.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

list of Scsi.Summary

Returns

List of commonly used information about virtual SCSI adapters.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

update(vm, adapter, spec)

Updates the configuration of a virtual SCSI adapter.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • adapter (str) – Virtual SCSI adapter identifier. The parameter must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.ScsiAdapter.

  • spec (Scsi.UpdateSpec) – Specification for updating the virtual SCSI adapter.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine or virtual SCSI adapter is not found.

Raise

com.vmware.vapi.std.errors_client.NotAllowedInCurrentState if one or more of the attributes specified in the spec parameter cannot be modified due to the current power state of the virtual machine or the connection state of the virtual SCSI adapter.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

class com.vmware.vcenter.vm.hardware.adapter_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance

com.vmware.vcenter.vm.hardware.boot_client module

The com.vmware.vcenter.vm.hardware.boot_client module provides classes for managing the virtual devices used to boot a virtual machine.

class com.vmware.vcenter.vm.hardware.boot_client.Device(config)

Bases: vmware.vapi.bindings.stub.VapiInterface

The Device class provides methods for configuring the device order used when booting a virtual machine.

The boot order may be specified using a mixture of device classes and device instances, chosen from among the following:

  • Device.Type.CDROM: Boot from a virtual CD-ROM drive; the device instance(s) will be chosen by the BIOS subsystem.

  • Device.Type.FLOPPY: Boot from a virtual floppy drive; the device instance(s) will be chosen by the BIOS subsystem.

  • Device.Type.DISK: Boot from a virtual disk device; the device instance is specified explicitly in Device.Entry.disks list, and multiple instances may be specified in the list.

  • Device.Type.ETHERNET: Boot from a virtual Ethernet adapter; the device instance is specified explicitly as Device.Entry.nic, and multiple adapters may be specified in the boot order list.

Parameters

config (vmware.vapi.bindings.stub.StubConfiguration) – Configuration to be used for creating the stub.

class Entry(type=None, nic=None, disks=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The Device.Entry class specifies a bootable virtual device class or specific bootable virtual device(s).

Tip

The arguments are used to initialize data attributes with the same names.

Parameters
  • type (Device.Type) – Virtual device type.

  • nic (str) – Virtual Ethernet device. Ethernet device to use as boot device for this entry. When clients pass a value of this class as a parameter, the attribute must be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Ethernet. When methods return a value of this class as a return value, the attribute will be an identifier for the resource type: com.vmware.vcenter.vm.hardware.Ethernet. This attribute is optional and it is only relevant when the value of type is Device.Type.ETHERNET.

  • disks (list of str) – Virtual disk device. List of virtual disks in boot order. When clients pass a value of this class as a parameter, the attribute must contain identifiers for the resource type: com.vmware.vcenter.vm.hardware.Disk. When methods return a value of this class as a return value, the attribute will contain identifiers for the resource type: com.vmware.vcenter.vm.hardware.Disk. This attribute is optional and it is only relevant when the value of type is Device.Type.DISK.

class EntryCreateSpec(type=None)

Bases: vmware.vapi.bindings.struct.VapiStruct

The class Device.EntryCreateSpec specifies a list of bootable virtual device classes. When a VM is being created and a list of Device.EntryCreateSpec is specified, the boot order of the specific device instances are not specified in this class. The boot order of the specific device instance will be the order in which the Ethernet and Disk devices appear in the nics and disks respectively.

Tip

The arguments are used to initialize data attributes with the same names.

Parameters

type (Device.Type) – Virtual Boot device type.

class Type(string)

Bases: vmware.vapi.bindings.enum.Enum

The Device.Type class defines the valid device types that may be used as bootable devices.

Note

This class represents an enumerated type in the interface language definition. The class contains class attributes which represent the values in the current version of the enumerated type. Newer versions of the enumerated type may contain new values. To use new values of the enumerated type in communication with a server that supports the newer version of the API, you instantiate this class. See enumerated type description page.

Parameters

string (str) – String value for the Type instance.

CDROM = Type(string='CDROM')

Virtual CD-ROM device.

DISK = Type(string='DISK')

Virtual disk device.

ETHERNET = Type(string='ETHERNET')

Virtual Ethernet adapter.

FLOPPY = Type(string='FLOPPY')

Virtual floppy drive.

get(vm)

Returns an ordered list of boot devices for the virtual machine. If the list is empty, the virtual machine uses a default boot sequence.

Parameters

vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

Return type

list of Device.Entry

Returns

Ordered list of configured boot devices.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

set(vm, devices)

Sets the virtual devices that will be used to boot the virtual machine. The virtual machine will check the devices in order, attempting to boot from each, until the virtual machine boots successfully. If the list is empty, the virtual machine will use a default boot sequence. There should be no more than one instance of Device.Entry for a given device type except Device.Type.ETHERNET in the list.

Parameters
  • vm (str) – Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.

  • devices (list of Device.Entry) – Ordered list of boot devices.

Raise

com.vmware.vapi.std.errors_client.Error if the system reports an error while responding to the request.

Raise

com.vmware.vapi.std.errors_client.NotFound if the virtual machine is not found, or if any of the specified virtual devices is not found.

Raise

com.vmware.vapi.std.errors_client.InvalidArgument if a any of the CDROM, DISK, ETHERNET, FLOPPY values appears in more than one Device.Entry with the exception of Device.Type.ETHERNET, which may appear multiple times if the virtual machine has been configured with multiple Ethernet adapters.

Raise

com.vmware.vapi.std.errors_client.ResourceBusy if the virtual machine is busy performing another operation.

Raise

com.vmware.vapi.std.errors_client.ResourceInaccessible if the virtual machine’s configuration state cannot be accessed.

Raise

com.vmware.vapi.std.errors_client.ServiceUnavailable if the system is unable to communicate with a service to complete the request.

Raise

com.vmware.vapi.std.errors_client.Unauthenticated if the user can not be authenticated.

Raise

com.vmware.vapi.std.errors_client.Unauthorized if the user doesn’t have the required privileges.

class com.vmware.vcenter.vm.hardware.boot_client.StubFactory(stub_config)

Bases: vmware.vapi.bindings.stub.StubFactoryBase

Initialize StubFactoryBase

Parameters

stub_config (vmware.vapi.bindings.stub.StubConfiguration) – Stub config instance